Configuration Report through Solman
Hello Experts,
I mapped all the configuration activities for MM, SD,HR,etc modules in solar02 and consultants are doing configuration in dev system through solution manager. Now my query is how we can show that or figure out that we have done configuration through solman in dev system??
Is there any Tracebility functionalityor other functionality is available to check this in solman or dev system?
Regards,
Abhishek
Hi,
You can have the reporting using SOLAR_EVAL txn code since it has the reporting functionality based on the Configuration Tab in SOLAR02.
Regards,
Vivek
Similar Messages
-
Steps to configure BPM report from Solman 7.00 for productive system ECC6.0
Hi all,
Please given me the steps to configure Buisness process Monitoring reports from Solman 7.0 for productive system( ECC6.0, windows & database oracle 10.2),
I wanted to create the Reports of monitoring the buisness.
Regards,
Akash Basis consultant.Thanks for replying Volker von Gloeden,
This thread is my first one in SDN & I am very glad that someone has given the answer ,
I will take a look for solution you have provided & will inform you.
Thanks again. -
Error while loading a BI report through Portal
Hi Experts,
I have a FPN configured. I have a BI Portal, which hosts all BI Content.
I am accessing the BI reports in central consumer Portal using remote roles. Everything works fine, then suddenly, we experience a problem opening one of the report through consumer Portal.
Consumer Portal shows a Loading... Message and the report never comes up.
If I test the same report throuigh Producer Portal it works fine. The complete FPN setting were working fine till yesterday. Nothing changed, still we are facing this issue. This is happening for a specific role. All other roles are working fine.
Has anyone else experienced this issue.
Thanks,
Yomesh.Hi Experts,
I have a FPN configured. I have a BI Portal, which hosts all BI Content.
I am accessing the BI reports in central consumer Portal using remote roles. Everything works fine, then suddenly, we experience a problem opening one of the report through consumer Portal.
Consumer Portal shows a Loading... Message and the report never comes up.
If I test the same report throuigh Producer Portal it works fine. The complete FPN setting were working fine till yesterday. Nothing changed, still we are facing this issue. This is happening for a specific role. All other roles are working fine.
Has anyone else experienced this issue.
Thanks,
Yomesh. -
Hi,
I am trying to create a iView to access the BI report through Portal.
We have done SSO and other configuration.
While previewing the iView I am getting the following error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Could not find portal application com.sap.ip.bi.service.generic.
Exception id: 08:17_28/07/08_0024_4848350
See the details for the exception ID in the log file
Any idea ???
How to check log files ??
Regards,
NirajHi,
Check these.
http://help.sap.com/saphelp_nw04s/helpdata/en/a3/7b583c2439e66fe10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a
/thread/826292 [original link is broken]
/message/3945089#3945089 [original link is broken]
Configuring EP for connecting to BW
Regards. -
Not able to generate report through EM.
Hi All,
one of the clients wants us to create a database report through EM.
We are in the process of creating the tablespace information report.
we havent created report through EM before.
Please find the below which we followed to create the report.
1. click report -->create-->
2. in the element tab
I select element--> add -->
In set parameter tab, I run this query
select tablespace_name as tbname, sum(bytes)/1024/1024 as size_mb from dba_data_files group by tablespace_name;
When i try to run the report, I am getting an error table or view does not exist.
This is the correct query when i ran the same query on db, i see the o/p.
Please also let me know how to configure the e-mail with report.
Your assistance is this regards is much appreciated.
Thanks and Regards,if you run your query against the repository database you will get the error while the user MGMT_VIEW in the repository database doesn't have any
privileges on dba_data_files (I'm using OEM/GC 10g - at least in this version the user MGMT_VIEW is used).
If you want to run your query against a target database you have only these choice: create a public database link for that target database.
select tablespace_name as tbname, sum(bytes)/1024/1024 as size_mb from dba_data_files@target_db group by tablespace_name;
On the other hand you could use the repository of the OEM/GC to get some informations about the tablespaces of a target database.
Please check:
http://download.oracle.com/docs/cd/E11857_01/em.111/e12135/toc.htm => Part II Reference => 7 Management Repository Views
For your purpose the view MGMT$DB_DATAFILES in the SYSMAN repository might be a good choice...
HTH -
ERROR WHILE SENDING REPORT THROUGH EMAIL .....
DEAR ALL
i have one problem . i am trying to send my report through e-mail.i am working with forms 5.0 and report 3.0 . i am calling report from form.when a client click on the button a report will be generated and this will be send to a specific person in a specific format either in html or pdf.
but when i click on button it initialize the report and gives the error
rep-4201 : error occured while initialize the mail subsystem.
rep-4220 : there is a problem with the mail subsystem.
if anyone of u have the solution for this please send to me.it will be very much helpfull if you send me the code.
thanks in adv.
D prasad.
nullwell you will have to configure a default mail client on your machine. you can do this by going to control panel->mail in windows os.
you might also need a .dll file mapi*.dll something. you will need this .dll file in your client machine.
best of luck -
Hello All,
Kindly help me to resolve this issue.
We have configured solution manager 7.o EHP1. For connecting to satellite system we have configured the trusted system configuration from solman to satellite system and also assigned logical component to satellite system.
We want to generate the early watch report in solman for the satellite system. We ran service preparation check and maintenance package. All are fine. The RFC *BACK is also working well in SM59.
Now in satellite system, in SDCCN we created the "refresh session " task. but this task is getting finished immediately and no data read session is visible in solman. We also made the solman BACK RFC as master for data read.
Regards,
VineetHello,
I see Jansi already provided you the wiki page I wrote.
Another thing to check, ensure that the Installation Number of the managed system is the same Installation number that is entered in the SMSY declarations, because if the numbers differ, then the refesh session will not find a session for that installation, and it will complete with no obvious errors.
BAsically the refresh sessions task is kinda dumb. It either pulls the session numbers and creates EWA (or other session type) SDCCN tasks for each session it pulls from Solution Manager. But if any error occurs, it passes no further information, and seems to run, complete, but finds no sessions.
THe other thing I should add is if the session can't be opened in DSA, no sessions will be returned, the session doesn't need to result in a dump. You may just get a dialog box stating "opening the service session EAnnnnnnnnnnnn failed".
So that should pretty much cover the Red Flagged EWA report.
Regards,
Paul -
Hi All,
Can we take bank report through DME in ALV format
to get
1. Employee name
2. Bank account no
3. Payment amount
SKPraneth,
thanks for the reply:
Yes DME not in our scope, This report is required before the payment goes to bank.
Is there any standerd report to fetch :
1. Employee name
2. Bank account no
3. Payment amount(from RT
curently we are using custom bank report .
will this Program HNZLBTD0 helpful (i cant execute tehi bcz DME config is not there)
Tcode - PC00_M99_CDTA if we configure DME can we extact an ALV output of above equrmnt (its isjust for standerd bank report functionality , but not to transfer payment details to bank)
SK -
Issue in Ibots deliver the reports through mail
Dear All ,
I am getitng the below error when i ran the ibot to deliver the reports through email .
Steps i have done :-
1. Configured SMTP in windows 2008 R2
2. Configured MAil through EM
3. Created Agent and configured the ibots to deliver the report .
Eventually succeeded, but encountered and resolved errors...
Number of skipped recipients: 2 of 3
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: java.io.IOException: The system cannot find the path specified.
Error Codes: AGEGTYVF
Location: saw.rpc.mis.read, saw.subsystem.portal.pdf, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/weblogic/Test_Report_ibot
...Trying Agent Get Response Content loop again.... Sleeping for 3 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: java.io.IOException: The system cannot find the path specified.
Error Codes: AGEGTYVF
Location: saw.rpc.mis.read, saw.subsystem.portal.pdf, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/weblogic/Test_Report_ibot
...Trying Agent Get Response Content loop again.... Sleeping for 5 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: A fatal error occurred while processing the request. The server responded with: java.io.IOException: The system cannot find the path specified.
Error Codes: AGEGTYVF
Location: saw.rpc.mis.read, saw.subsystem.portal.pdf, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/weblogic/Test_Report_ibot
Exceeded number of request retries for method GetResponseContent.Thanks .. But when i choose the plain or HTML text delivery options . it throws the below error .
AgentID: /users/weblogic/To_Muni_Delete
[nQSError: 75027] Failed to open connection to SMTP Server (host 10.19.252.13; port 25). AgentID: /users/weblogic/To_Muni_Delete
...Trying SMTP Delivery loop again... Sleeping for 3 seconds. AgentID: /users/weblogic/To_Muni_Delete
[nQSError: 75027] Failed to open connection to SMTP Server (host 10.19.252.13; port 25). AgentID: /users/weblogic/To_Muni_Delete
...Trying SMTP Delivery loop again... Sleeping for 3 seconds. AgentID: /users/weblogic/To_Muni_Delete
[nQSError: 75027] Failed to open connection to SMTP Server (host 10.19.252.13; port 25). AgentID: /users/weblogic/To_Muni_Delete
...Trying SMTP Delivery loop again... Sleeping for 3 seconds. AgentID: /users/weblogic/To_Muni_Delete
[nQSError: 75027] Failed to open connection to SMTP Server (host 10.19.252.13; port 25). AgentID: /users/weblogic/To_Muni_Delete
Exceeded number of SMTP delivery retries. -
Sending Early Watch Alert Report through Email
Hi All,
For sending the Early Watch Alert Report through Email, I have completed the configuration. After adding the desired Email Address in Path Solution_manager-->goto--
> Automatic Email Transmission, do i need to create a Zjob in SCOT T-code or this is sufficient.
waiting for ur quick responses.
Regards,
Prashant.Dear
You have to make sure your mailing of SCOT is being sent out.
Regular SCOT job for mailing is sufficient, it does not require additional one (INT option).
Kind regards
Tom
Edited by: Tom on Sep 4, 2008 9:44 AM -
Viewing the discoverer reports through portal
How can i view oracle discoverer reports through portal .Suppose
i have portal page where i want to create few links on clicking
of which these reports are renderer on the portal.
What configuration is required for doing this ? i mean to enable
the discoverer view what steps are required and what url is
given .
Any suggestion will be of great help.
NeetiHi All,
We are also having similiar type of error in our portal.
com.sap.engine.services.prtbridge##com.sap.engine.services.prtbridge
#######SAPEngine_System_Thread[impl:5]_13##0#0#Error#1#/System/Server#Plain###
The cluster server element 125898350 is not added in the EP cluster context,
because prtbridge on 125898350 is stopped or not yet started
(maybe the server is starting or shuting down).
We have implemented the FPN using RRA.
This error comes only for few users when they navigate in Portal. After clearing the cache, it works for all. Kindly help us to resolve this issue.
Regards,
Venkatesh -
Daily System Health monitoring report from SOLMAN
Hi Experts,
I am working on a project where I need to triiger a consolidated system health report from sol man, much like early watch report.
Only thing is that it should be generated daily for each system.
Well That makes the expectation.
Progress so far :-
a. Applied E2E120 for managed system ie Technical monitoring is working for that system.
Challenge :-
a. Generating a consolidated report, with checklists for system logs, dumps, qrfc / trfc's. As Technical monitoring is giving these info separately.
b. Options in technical monitoring are too many and not sure which can deliver what i am looking for.
a. IT Performance reporting
b. Service level reporting
c. SDCCN Reporting.
d. or automatic configure reporting.
c. The report has to be generated periodically only once in a day. It should not be alert monitoring that an system alert triggers a mail and management is bombarded with too many mails.
Any valuable suggestion will be very helpful and will certainly be rewarded.
Thanks
AbhijeetHi Jhansi,
few things first, I have really liked your blogs and forum discussion on Sol Man. They have been really very helpful.
Now, after spending around 2-3 days on it, Closest bet is "IT Performance reporting". With this i am compromising with consolidated report. (Just hoping management agrees for it )
But here is the new challenge I am going through. It is the web templates to use for specific checklist.
I used below link.
http://help.sap.de/saphelp_sm71_sp05/helpdata/en/3f/ecbef23769488f806177717adee541/content.htm?frameset=/en/a3/074aa01bbe4662b99bc20ec5263cf8/frameset.htm¤t_toc=/en/81/6f8fe54f854ef2bd412c8660f5ed6e/plain.htm&node_id=463
I need template for System logs, qrfc, trfc, PI messages etc. It is not present in the link provided. Even searched on SMP, it was not available. Can we manually create and use the web templates.
Also when i used such templates, I am getting following error message in the monitoring
Let me know your inputs.
Thanks
Abhijeet -
Run reports through browser on local machine
Hi,
I am trying to run 6i reports through a web browser. I have
installed 6i and the reports server on a local machince. I have
configured the reports server and can get it to start.
In order for me to run reports on my local machine through a web
browser do i need a web server ?
I am in my final year @ university, if i need a web server can i
use personal web server ?
The purpose of running them through a browser is only for a demo
for my final year project.
Oracle team : any chance you could host my report ? LOL
Thanks in advance for ANY help,
Russell.Hi,
If you have installed the 6i Base Release i.e (6.0.8.8.0) version
then the WEBDB Listener comes with the 6i CD. When you install
it automatically get installed also.
In that case you don't need to have the web server. You can
call the report on web using the following URL:
http://host:port/dev60cgi/rwcgi60?report=<reportname>&otherparame
ters.
Here Host and port specifies that machine name and port number
where your webDB listener is installed.
In your case it will be your local machine. By default the
port on which the WebDB is installed is 80.
You can use any web server also, thing is that web server should
support the CGI implementation.
In case of more info you can update this posting.
Hope this helps
cheers
Arun -
Configuring reports for express data(2)
We are in the process of configuring reports for express data.
In this regard we have done the following steps:
1.In the machine A reports 9i developer suite release 2 has been installed on Windows 2000
Professional Edition with the following utilities - (a) Oracle Reports Builder and runtime
support,(b) Oracle Express Connection Editor and (c) Oracle SNAPI are installed.
2.Express Server 6.3.4 has been installed on Windows 2000 Professional Edition in machine
B with Remote Operation SNAPI 6.3.4.0.
3.Oracle 8i has been installed on Solaris and the Express Support Administrator and User
Accounts have created and the xrb_admin.sql and xrb_user.sql have been run through the
respective accounts.
Queries
1.We have still not run the Express Oracle8 External Procedures on the Oracle8
gateway. Should we run this in order to get Express Data in Reports9i incase of the General
Maintenance where the Express data fetches the data from the Oracle8 gateway on the fly
?We are also not able find the Express Oracle8 External Procedures downloads after
extensive search on OTN.Please guide as to where can we find the downloads.
2.What are the configurations settings that have to be done in the tnsnames.ora,sqlnet.ora
and listener.ora ?Ramakrishnan,
Express connectivity for Oracle9i Reports is installed by default as one of your pluggable data sources and it communicated directly with Express, which is a large change over Reports 6i in which you needed an Oracle8i database to talk to the Express database.
For Oracle9i Reports, you need to have:
1 - Express installed 6.3 or later.
2 - Oracle9i Reports
3 - The connection dialog (which is documented in the release notes if you need to set this up)
That's it. When you click on the Express PDS to access the data, it will read the connection dialog information and you need to supply the logon information to the Express database.
You should also look at the help topic for Express and you will find all the necessary documentation on configuring Reports and how to connect.
Regards,
The Oracle Reports Team jls -
How to send reports through mail in 11g
Hi,
How can we send reports through mails in 11g, please send me the steps,
ThanksHi,
Please refer the below links.
http://satyaobieesolutions.blogspot.in/2012/06/agent-mail-configuration-for-obiee-11g.html
http://satyaobieesolutions.blogspot.in/2012/06/obiee-11g-agent-mail-configuration-step.html
Hope this help's
Thanks,
Satya
Edited by: Satya Ranki Reddy on Jun 10, 2012 11:50 AM
Maybe you are looking for
-
Sir/madam, I am quite new to the Labview FPGA module. I am currently working on an application where i have to generate a pwm to control the ON time duration . The pwm ON time depends on the frequency of an input signal.I want to retrieve the ON tim
-
Ipod shows in Windows, not in iTunes - it used to work!
I've tried everything I could find on the site to remedy this - resetting ipod when connected and when not connected, removing everything itunes and ipod related & reinstalling, changing iPod's drive letter, etc. The problem started when our sysadmin
-
No sound on HDMI with Windows 7 om Mac Mini 2010
Hi, i've installed bootcamp (windows 7 64 bit) on a new mac mini. When I turn on power an boot windows there's no sound over HDMI. The windows device manager says that everything is working properly. Then I boot mac os and HDMI sound works fine in ma
-
How do I soft-proof in LR?
Is there a way to view files in LR with different profiles? I looking to perform the same function I can in PS (view>proof set up>custom>picking my stored profiles to use for viewing). I primarily use LR and prefer not to keep switching back and fort
-
Designer 6i on Oracle 8.0.6 Server
Hi, Did anybody used Designer 6i on Oracle 8.0.6 database Server?? I tried using it but I am getting the following error: IMP-00003: ORACLE error 2248 encountered ORA-02248: invalid option for ALTER SESSION IMP-00000: Import terminated unsuccessfully