Configuration require for SOLMAN after installation
Dear all,
I have successfully install Solution Manager 7.0 EHP1 on Windows Server 2008 Oracle 10g database.
Now I cant understand what are the configuration require and from where shall i start?
Please help me as I am a beginner.
Thanks
Nurujjaman
Hi,
Follow the steps from the configuration guide for basic configuration activities:
https://service.sap.com/~sapidb/011000358700000308502009E/SM_CONF_SPS23.pdf
Also check http://service.sap.com/~sapidb/011000358700001735062008E to get a visual help.
For advanced configuration, follow the RKT at http://service.sap.com/rkt-solman
Regards,
Srikishan
Similar Messages
-
MORE DETAIL ABOUT MY problem (Configuration Steps for Oracle Forms installation)
OS:WINDOWS 2000 SERVER
DB:8I
FORMS:6I
I WANT TO TEST MY FROM TO RUN ON THE WEB ONLY TEST BY (RUN FROMS IN THE WEB)
BUT I CAN'T DO CONFIGRURATION STEPS (VIRTUAL PATH)
WHERE I CAN DO THIS CONFIGRATION
Configuration Steps for Oracle Forms installation of 06:05:38 2002/10/18
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory F:\devnt\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory F:\devnt\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory F:\devnt\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory F:\devnt\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory F:\devnt\JINIT.Hi Guys,
Any help on this request will be very helpful.
Thanks,
Ashok Kumar.G -
Hardware Requirements for SOLMAN
Hi everybody,
I'll appreciate (with points ) if somebody can give me the minimum hardware requirement for installing Solution Manager in a Windows machine.
We are about to install a ECC 6.0 (with IS-U/CCS) for building a Demo.
Thanks,
Jessica.H/W specification for Solman 4 for Windows/Oracle Standalone
RAM - 3 GB min
HDD - 80 GB
CPU - 2 (1 CPU also will do)
You can check under https://websmp107.sap-ag.de/instguides under SAP Components->Solution Manager
You check the hardware and software requirements for your operating system (OS) and the SAP instances using the Prerequisite Checker tool.
The Prerequisite Checker provides information about the requirements that you need to meet before you start the installation. For example, it checks the requirements for the different installation services. -
Hardware Requirement for Solaris 8 Installation
Hi,
Can anyone give me the hardware requirements for Solaris 8 Installation. I need to install the following patches too..
C++Runtime 108434-12
Linker 109147-21
J2SE Solaris8 (patch cluster)
SUNWxwfnt (X Window System platform fonts)
SUNWilof (ISO-8859-1 (Latin-1) fonts)
Please help.
Regards
AparnaCheck out http://docs.sun.com/app/docs/doc/806-1054 for the HCL for the intel version of Solaris 8.
or http://docs.sun.com/app/docs/doc/806-2221-10 for Sparc hardware. -
Configurations required for IDOC to File
Can any body suggest me the configuration required for integrating remote R/3 system with the XI Server.
I want to know the following.
1) How and where to configure R/3 with the XI server.
2) What are the configurations required for Outbound and Inbound IDocs in R/3 and XI Servers.Hi Rajeshwar,
take a look over here:
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/weblogs/topic/16
you'll find at least 5 weblogs that show the idoc configuration
Regards,
michal
XI FAQ - http://www.bcc.com.pl/netweaver/sapxifaq -
What are the backend configuration required for photo upload from portal?
Hi all,
When i am trying to upload the photo from portal it is giving error
can not archive the photo
we are using portal 7 and ecc 6.0
I want to know
What are the backend configuration required for photo upload from portal
Can any but help me out
RajendraHi,
Are you using the standard iview. If that's the case you need to configure in the backend. Meaning you need to store the photo in the Org management(HR) which the HR functional guys will do. You just need to add the iview to your role.
Let me know if you require further informationn.
Award points if helpful.
Cheers,
sathya -
S/w requirements for b1 2005 installation
Hi all,
Can anybody tell me the complete s/w requirements for b1 2005 installation.
Thanks,
Suresh Yerra.For 2005B
Server Platforms:
1. Microsoft® Windows Small Business Server (SBS) 2003 SP1 (6)
- 32 Bit- Standard & Premium Edition
2. Citrix Presentation Server 4.0 (11, 12)- Standard, Advance &
Enterprise Edition
Supported as of 2005 B PL10
1. (Microsoft® Windows Server 2003 SP2- 32 Bit / 64 Bit (x64)(incl.
Windows Terminal Services) (12)- Standard & Enterprise Edition
Microsoft® Windows Server 2003 R2- 32 Bit / 64 Bit (x64)(incl.
Windows Terminal Services) (12)- Standard & Enterprise Edition )
Supported as of 2005 B PL25
1. (Microsoft® Windows Small Business Server (SBS) 2003 R2 (6, 7) - 32
Bit- Standard & Premium Edition)
For standalone installations,
1. (Microsoft® Windows XP SP2- 32 Bit- Professional Edition)
Client Platforms
1. Microsoft® Windows XP SP2- 32 Bit- Professional Edition
2. ( Microsoft® Windows Vista- 32 Bit- Business, Enterprise &
Ultimate Edition )
The SAP formal internal processes that are required for the
announcement of Vista support have not been completed yet. Hence,
Vista support will be announced as soon as these processes are
completed.
SQL Platforms:
1. Microsoft® SQL Server 2000 SP4- 32 Bit- Standard & Enterprise
Edition
2. Microsoft® SQL Server 2005 SP2- 32 Bit / 64 Bit (x64)- Express
, Standard & Enterprise Edition
3. IBM DB2 UDB Express Edition V8.2 FP2 for Windows
- 32 Bit
Desktop Platforms
1. Microsoft® Office XP SP2- Professional Edition
2. Microsoft® Office 2003 SP1- Standard & Professional Edition
3. Microsoft® Office 2007- Standard & Professional Edition
4. The 2007 Microsoft Office system programs client is a 32-bit
application and can run on a Windows 64-bit platform (Windows XP,
Windows Server 2003, and Windows Vista) but there may be some
feature limitation.
Regards,
Dhana -
Sql Server configuration requirements for SAP ECC 6.0
Dear All,
I am using Sql server 2005 Enterprise as data store for Sap ecc 6.0.There are certain configuration requirements to be done while installing it so that sapinst.exe (sap installer) is able to use it to create its own DB's.
For eg it requires a collation of SQL_Latin1_General_CP850_BIN2 whereas the default that gets installed is SQL_Latin1_General_CP1_CI_AS.
Like this there are other requirements which I am not aware of.Most of the docs available on the Internet are talking of ecc 6.0 with Oracle 10.2G which is the most common combination.I am having docs for this combination.
I am installing ecc for the first time.
*I am unable to download docs from sap. marketplace as it requires a login given to certified users or sap purchasers.I am neither.*
Can anyone help me with this.If anyone has ECC 6.0 installation guide with sql server it will be serve my purpose.
Thanks for your efforts."Excuse me?
What he is doing is illegal , you know what that means, right? If you don't believe me, read the license that comes on the first installation DVD.
Actually, I even think it's kind of barefaced to ask in the forum of the software vendor for help! I mean, it's like asking in a bank forum how to rob and fraud the bank! You - and many others - may think that it's right and ok to do that. I tell you: it is not. Not for "home use", not for personal use, not at all.
You can use the software available here in the SDN to lean and study, that's why it's there.
If you deal at all with copied software, then just be smart enough to make other people not notice. He can be happy if he's not prosecuted (which would legally be possible)."
Do u understand what is legal or illegal? Have u read the license in full?
The license does not put any limit on the number of users.So if I am using it means that one more user has been added by the license holder.
Therefore there is nothing illegal about it.
It would have unethical (not illegal) if the software is being used for a business purpose other than for which it has been purchased.
Since it being used for training purpose the above does not hold good.
In fact it is SAP who is benefited in the long run bec' after a person learns it technology because he is going to implement it somewhere, for which the concerned user will have to purchase a license.Therefore I am helping SAP to increase its business.
But there are some stupid people who don't understand these things but are ready to shout at the top of their voice thinking themselves to be intelligent.
Edited by: coolmind26 on Jun 5, 2011 10:57 AM -
System requirements for new After Effects CC
Does anyone know the minimum system requirements for the new After Effects coming out this summer? Specifically the OSX version for Mac?
Thanks.hey,
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7.4 , v10.8 or v10.9
4GB of RAM (8GB recommended)
5GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space for disk cache (10GB recommended)
1440x900 display
OpenGL 2.0–capable system
QuickTime 7.6.6 software required for QuickTime features
Optional: Graphics card from list below with at least 1GB VRAM for GPU acceleration of ray-traced 3D renderer
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.* -
Configuration required for attached for a file in a PO in ECC 6.0
Hi All,
1) Is any configuration/setting required for attaching a file in a PO/PR ECC 6.0.
2) How we can mail /send that file, is any enhancement required
KunwarHi,
In One ID for any PO ,when go sytem in toolbar --> sevices for object,I am getting the services for object and showing the attachment ,but in another ID with same server ,computer ,it is showing "No services avaiable"
please guide any configuration/ setting missing?
Kunwar -
Is SAP-OSS RFC Configuration required for Technical Monitoring ?
Hi Experts,
I have not configured the SAP-OSS rfc connection.Is it required for setting up the technical monitoring(Tcode : SOLMAN_SETUP).
If Yes can you please help me in solving the above problem.Our aim is to configure technical monitoring for system and self-monitoring.
Thanks In Advance,
Satheesh EHello,
I am assuming you are speaking about 100 concurrent users and not the entire company userbase.
Core i5 (although is dual core underneath) is generally meant for desktops, having said this, please note that its difficult to arrive at any recommendation based on simply userbase. You need to have more data with you with respect to amount of transactions, concurrent users, peak period, load during peak period etc.
You need to use SAP's quicksizer to calculate the amount of SAPS for your production servers, SAPS is the unit used to calibrate your hardware for running SAP Applications.
If you provide your SAPS value to hardware vendor, they will advise what CPU rating and how many CPUs you need. They will infact tell you the entire configuration that you need.
you can also buy the following book:
http://www.sap-press.com/products/Sizing-SAP-Systems.html
Regards,
Siddhesh -
Status Profile: Configuration required for authorisation based on user
hi friends
from the sale order , i configured the status profile for authorisation for release the item level .
so what i do for cofiguration to give authorisation particular user(manager) and also not required for user(end user)
with regards
dinesh
Edited by: code acess on Feb 28, 2011 6:22 AMhi ram
thanks, how i give authorisation for particular user.. i need configuration setting for authorisation. i dont know what i tell to Basis for authorisation.
Consultant
with regards
dinesh -
Looking for what software required for Enterprise Manager Installation
Hi All,
I am fairly new in working with Enterprise Manager, Previously used 11g Database Control, but never install Enterprise Manager (OEM). Now due to the increase in databases, I am considering to install OEM (Oracle Enterprise Manager) to list all database (from over 20 Linux severs) to one location.
I have read documentation and still confused on what should be installed for OEM. I am planning to use OEM 12c Release (12.1.0.4), my current databases are 11gR2 (11.2.0.4 ).
Could you tell what I need from below list?
OEM (12.1.0.4)
Web Logic server (Do I need that separately, or will this be installed with OEM?)
OEM Agent on all other 20 servers (do I need to install separate software on them? Please guide)
Any specific version of Java.
Please guide me if I need any other software or plugin.
I have already installed oracle software and have created a database by using “Custom” option in DBCA. My server OS is Linux 64 Bit for Enterprise Manager.
Thanks in Advance.Hi,
You would need 12c OEM cloud control software , Database software(For creating repository) and agent software (For monitoring targets on other hosts)
Java Development Kit (JDK) 1.6.0.43.0 and Oracle WebLogic Server 11g Release 1 (10.3.6) are installed by default with the 12c OMS installation although you do have a option of installing it separately if you want but Oracle strongly recommends using the 12c installation process to install the JDK and Oracle WebLogic Server for use with Enterprise Manager 12c.
Below is the link for Enterprise Manager Cloud Control 12c Architecture
http://docs.oracle.com/cd/E24628_01/doc.121/e25353/overview.htm#EMCON112
For 12c OMS installation steps refer to
http://docs.oracle.com/cd/E24628_01/install.121/e22624/toc.htm
EM 12c R2: How to Install Enterprise Manager Cloud Control 12.1.0.2 using GUI Mode (Doc ID 1488154.1)
For agent installation refer to
Installing Management Agents Using Add Host Targets Wizard or EM CLI
http://docs.oracle.com/cd/E24628_01/install.121/e22624/install_agent.htm#EMBSC181
Installing agents using other methods
http://docs.oracle.com/cd/E24628_01/install.121/e24089/part_installing_agent.htm#sthref323
To download 12c software
http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html
Regards,
Rahul -
Configurations Required for Excel download in IR
Hi,
Please let me know the configurations req for enabling Excel download feature from Interactive report.
Currently i see only CSV and PDF options in report attributes page.
Regards,
CKLPHi,
You need advanced printing engine e.g. BI publisher
You can start check these links
http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
http://carlback.blogspot.com/2007/03/apex-cocoon-pdf-and-more.html
http://ubuntuforums.org/showthread.php?t=1004742
Search more information e.g. Apache POI and FOP from this forum
Br,Jari -
Configure ASM for oracle Grid installation
Hi,
I do not know how to configure ASM for oracle grid infrastructure. As i tried to install oracle grid infrastructure says [INS - 30507] Empty ASM disk group.
I have to configure Asm before installing 11g R2. Please let me know what i have to do and provide the steps to configure and administer asm.
Thanks in advance.http://docs.oracle.com/cd/E11882_01/install.112/e24660.pdf
ORACLE-BASE - Oracle Database 11g Release 2 RAC On Oracle Linux 5.8 Using VirtualBox
Maybe you are looking for
-
Touch no longer read by computer
i have had my touch for 8 months, today however my ipod is not getting read by the computer, the problem i think is to do with the ipod since the computer reads all other devices. i have two i pod connections but still the i pod is not being read by
-
Help needed in Table and field
Hi all, can any one tell me the table and field to get basic unit of measure and unit of issue. I guess both are different. Thanks
-
How to transfer music library from iphone 4 to iphone 5.
I cannot figure out how to transfer the music from my iphone 4 to my new iphone 5.
-
HELP!! I'm not getting the security questions reset e-mail from Apple!! D:
I got an App Store card with €25 and added it to my Apple ID and it worked but as soon as I wanted to buy something, I had to answer my security questions which I didn't know the answer to so I decided to reset my security questions by sending an ema
-
How do I deactivate when the deactivate tab is grayed out.
I am trying to deactivate an installation of CS6 on a PC, running windows 7. The product was activated with the offline activation method. The deactivate tab under Help is grayed out but the product is activated. The PC is now connected to the int