Configuration required for attached for a file in a PO in ECC 6.0
Hi All,
1) Is any configuration/setting required for attaching a file in a PO/PR ECC 6.0.
2) How we can mail /send that file, is any enhancement required
Kunwar
Hi,
In One ID for any PO ,when go sytem in toolbar --> sevices for object,I am getting the services for object and showing the attachment ,but in another ID with same server ,computer ,it is showing "No services avaiable"
please guide any configuration/ setting missing?
Kunwar
Similar Messages
-
DMS Configuration required to use for PM (Plant Maintenance)
Dear Experts,
We are planning to use external server for document management i.e. SAP DMS ... can anyone forward useful documents to [email protected]..
I am new to this SAP DMS, any document on DMS-PM will be helpful for me
thanks in advance
Nagesh AswarthaHi,
you will find all the necessary data also in the SAP Online Documentation under http://help.sap.com. For DMS question please see the sub-point 'Cross-Application-Components' where you find the topic Document Management.
Best regards,
Christoph -
Configurations required at PI for proxy connection
Hi All,
A proxy is to be generated from ECC to PI .Can anyone please tell the configurations that need to be done from PI side. While testing the proxy through SPROXY, we are getting the error message, which specifies the logical port is not assigned to proxy class.Check these StepByStep Help:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?QuickLink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/display/XI/Step-by-stepFTPtoABAPProxy -
Steps for a XI scenario file on portal server to ECC table.
Hello Experts-
I am trying to populate a R/3 table with data from a text file on portal server (AIX). Can any one please give provide with a high level steps on how I can acheive this.
How can I make XI look for file on Unix system?
Do I need to create A RFC which accepts input and stores it to the table for this?
What kind of properties should the table have?
Thanks,
Raj.after ur basis guy shares that folder.for testing what u can do is just ask the basis guy to take the remote access to the XI server and from there try to access the path mentioned ...if u are able to access it means that the sender file channel in the NFS mode will work as well
also u can try pinging the portel server from the XI server after the basis guy takes the remote..
Also be sure that XI only understands XML and the file taht u want XI to read is txt file so u will have to use a extra feature in the sender file channel called FCC or file content conversion ....forum is full of how to write FCC ..u can search
Edited by: Tarang Shah on Feb 3, 2010 9:35 PM
Edited by: Tarang Shah on Feb 3, 2010 9:36 PM -
Configurations required for IDOC to File
Can any body suggest me the configuration required for integrating remote R/3 system with the XI Server.
I want to know the following.
1) How and where to configure R/3 with the XI server.
2) What are the configurations required for Outbound and Inbound IDocs in R/3 and XI Servers.Hi Rajeshwar,
take a look over here:
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/weblogs/topic/16
you'll find at least 5 weblogs that show the idoc configuration
Regards,
michal
XI FAQ - http://www.bcc.com.pl/netweaver/sapxifaq -
ERROR : OpenDoc CR to PDF - File is too large for attachment.
We are getting the following error in 3.1 using an OpenDoc call when we call a large Crystal Report to PDF format...
Error : 52cf6f8f4bbb6d3.pdf File is too large for attachment.
It runs OK from BOE when given parameters that returned 44 pages. (PDF = 139 KB)
We get the error on a parameter-set that returns 174 pages when run via CR Desktop or as a SCHEDULED Instance. (PDF = 446 KB).
Client application can't use the SDKs to SCHEDULE Instances - only configured for OpenDoc calls.....
The BOE server is running on SOLARIS - and it's is a 2 Server CMS-Cluster.
The problem is SPORADIC, so I am thinking the issue is related to a specific setting on one of the servers.
Any thoughts on where to start looking...?Problem is _not _with the number of Rows returned - it is an issue with the size of the PDF file that it is trying to move.
Found a possible WINDOWS solution on BOB - need to find if there is an equivalent for SOLARIS...
Check the dsws.properties on web server D:\Program Files\Business Objects\Tomcat55\webapps\dswsbobje\WEB-INF\classes
See if you can change any parameter to remove size limitation.
#Security measure to limit total upload file size
maximumUploadFileSize = 10485760 -
Sorry, I don't know what other details I should provide. My friend has a program installed which lets him know out loud what is happening as he navigates, but it's been quite a process for him to attach files; he often requires help and it would certainly be easier with a hotkey.
I did check the hotkeys list on this site and discovered a whole lot of hotkeys I never knew existed, but none for attaching a file to an email. Any ideas that might be helpful are welcome, however I should say up front that I'm not nearly at the technical level most people on here obviously are. I can, however, follow clear instructions. :-)More threads: https://support.mozilla.org/en-US/search?q=fbi&asked_by=&answered_by=&w=2&a=1&sortby=1&esab=a
-
What permission does the Service account requires on AD for the Workflow manager 1.0 to be configured in SharePoint Farm?
The workflow manager configuration wizard crashes with the below error when used a domain account (setup account with full prvilige on sql and server). It requires some specific permissions on AD ? I couldnt see any documentation stating what permission
it requires.
Can anyone help ?
Problem signature:
Problem Event Name: CLR20r3
Problem Signature 01: AUTRTV22OQMI5JWSVNDSSNCH0E5DQ2L1
Problem Signature 02: 1.0.20922.0
Problem Signature 03: 505e1b30
Problem Signature 04: System.DirectoryServices.AccountManagement
Problem Signature 05: 4.0.30319.17929
Problem Signature 06: 4ffa5bda
Problem Signature 07: 3ef
Problem Signature 08: 348
Problem Signature 09: KCKGYE1NBUPA2CLDHCXJ0IFBDVSEPD1F
OS Version: 6.2.9200.2.0.0.272.7
Locale ID: 1044
Additional Information 1: 8e7b
Additional Information 2: 8e7b3fcdf081688bfcdf47496694f0e4
Additional Information 3: c007
Additional Information 4: c007e99b2d5f6f723ff4e7b990b5c691
Log Name: Application
Source: Application Error
Date: 27.08.2014 11:47:54
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: OSS01-MAP-226.global.corp
Description:
Faulting application name: Microsoft.Workflow.Deployment.ConfigWizard.exe, version: 1.0.20922.0, time stamp: 0x505e1b30
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
Exception code: 0xe0434352
Fault offset: 0x0000000000047b8c
Faulting process id: 0x23a0
Faulting application start time: 0x01cfc1dbe703a8ac
Faulting application path: C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 36f30eb4-2dcf-11e4-9415-005056892fae
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-08-27T09:47:54.000000000Z" />
<EventRecordID>7471545</EventRecordID>
<Channel>Application</Channel>
<Computer>OSS01-MAP-226.global.corp</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft.Workflow.Deployment.ConfigWizard.exe</Data>
<Data>1.0.20922.0</Data>
<Data>505e1b30</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.2.9200.16864</Data>
<Data>531d34d8</Data>
<Data>e0434352</Data>
<Data>0000000000047b8c</Data>
<Data>23a0</Data>
<Data>01cfc1dbe703a8ac</Data>
<Data>C:\Program Files\Workflow Manager\1.0\Microsoft.Workflow.Deployment.ConfigWizard.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>36f30eb4-2dcf-11e4-9415-005056892fae</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Log Name: Application
Source: .NET Runtime
Date: 27.08.2014 11:47:54
Event ID: 1026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: OSS01-MAP-226.global.corp
Description:
Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.DirectoryServices.AccountManagement.MultipleMatchesException
Stack:
at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRefHelper(System.Type, System.String, System.String, System.DateTime, Boolean)
at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRef(System.Type, System.String, System.String, System.DateTime)
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>, System.String,
System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Documents.TextEditorMouse.MoveFocusToUiScope(System.Windows.Documents.TextEditor)
at System.Windows.Documents.TextEditorMouse.OnMouseDown(System.Object, System.Windows.Input.MouseButtonEventArgs)
at System.Windows.UIElement.OnMouseDownThunk(System.Object, System.Windows.Input.MouseButtonEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-08-27T09:47:54.000000000Z" />
<EventRecordID>7471544</EventRecordID>
<Channel>Application</Channel>
<Computer>OSS01-MAP-226.global.corp</Computer>
<Security />
</System>
<EventData>
<Data>Application: Microsoft.Workflow.Deployment.ConfigWizard.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.DirectoryServices.AccountManagement.MultipleMatchesException
Stack:
at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRefHelper(System.Type, System.String, System.String, System.DateTime, Boolean)
at System.DirectoryServices.AccountManagement.ADStoreCtx.FindPrincipalByIdentRef(System.Type, System.String, System.String, System.DateTime)
at System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(System.DirectoryServices.AccountManagement.PrincipalContext, System.Type, System.Nullable`1<System.DirectoryServices.AccountManagement.IdentityType>,
System.String, System.DateTime)
at System.DirectoryServices.AccountManagement.UserPrincipal.FindByIdentity(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsUserValid(System.DirectoryServices.AccountManagement.PrincipalContext, System.String)
at Microsoft.ServiceBus.Commands.Common.SecurityHelper.IsDomainUserValid(System.String, System.String)
at Microsoft.ServiceBus.Commands.Common.ValidateUserAttribute.Validate(System.String)
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsViewModel.ValidateDomainUser()
at Microsoft.Deployment.ConfigWizard.UICommon.AccountDetailsControl.UserIdTextBox_LostFocus(System.Object, System.Windows.RoutedEventArgs)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.Controls.Primitives.TextBoxBase.OnLostFocus(System.Windows.RoutedEventArgs)
at System.Windows.UIElement.IsFocused_Changed(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.Controls.TextBox.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.ClearValueCommon(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata)
at System.Windows.DependencyObject.ClearValue(System.Windows.DependencyPropertyKey)
at System.Windows.Input.FocusManager.OnFocusedElementChanged(System.Windows.DependencyObject, System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.NotifyPropertyChange(System.Windows.DependencyPropertyChangedEventArgs)
at System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.EntryIndex, System.Windows.DependencyProperty, System.Windows.PropertyMetadata, System.Windows.EffectiveValueEntry, System.Windows.EffectiveValueEntry ByRef, Boolean, Boolean,
System.Windows.OperationType)
at System.Windows.DependencyObject.SetValueCommon(System.Windows.DependencyProperty, System.Object, System.Windows.PropertyMetadata, Boolean, Boolean, System.Windows.OperationType, Boolean)
at System.Windows.DependencyObject.SetValue(System.Windows.DependencyProperty, System.Object)
at System.Windows.FrameworkElement.OnGotKeyboardFocus(System.Object, System.Windows.Input.KeyboardFocusChangedEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.KeyboardDevice.ChangeFocus(System.Windows.DependencyObject, Int32)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.DependencyObject, Boolean, Boolean, Boolean)
at System.Windows.Input.KeyboardDevice.Focus(System.Windows.IInputElement)
at System.Windows.UIElement.Focus()
at System.Windows.Documents.TextEditorMouse.MoveFocusToUiScope(System.Windows.Documents.TextEditor)
at System.Windows.Documents.TextEditorMouse.OnMouseDown(System.Object, System.Windows.Input.MouseButtonEventArgs)
at System.Windows.UIElement.OnMouseDownThunk(System.Object, System.Windows.Input.MouseButtonEventArgs)
at System.Windows.RoutedEventArgs.InvokeHandler(System.Delegate, System.Object)
at System.Windows.EventRoute.InvokeHandlersImpl(System.Object, System.Windows.RoutedEventArgs, Boolean)
at System.Windows.UIElement.RaiseEventImpl(System.Windows.DependencyObject, System.Windows.RoutedEventArgs)
at System.Windows.UIElement.RaiseTrustedEvent(System.Windows.RoutedEventArgs)
at System.Windows.Input.InputManager.ProcessStagingArea()
at System.Windows.Input.InputProviderSite.ReportInput(System.Windows.Input.InputReport)
at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr, System.Windows.Input.InputMode, Int32, System.Windows.Input.RawMouseActions, Int32, Int32, Int32)
at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr, MS.Internal.Interop.WindowMessage, IntPtr, IntPtr, Boolean ByRef)
at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef)
at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32)
at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate)
at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32)
at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef)
at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame)
at System.Windows.Application.RunInternal(System.Windows.Window)
at System.Windows.Application.Run()
at Microsoft.Workflow.Deployment.ConfigWizard.App.Main()
</Data>
</EventData>
</Event>Hi Karthik,
You could refer to the series of videos below to install and configure workflow manager in SharePoint 2013:
http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx
The Episode 2 describes the necessary account in AD with right permission in the installation process:
http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx#episode2
Regards,
Rebecca Tu
TechNet Community Support -
Cant open any attachment or downloaded file with any office 365 for small bussines
I cant open any e-mail attachment or downloaded file of any kind with any application in office 365 for small bussines. Since I need it for bussiness need help NOW. Thank you.
Hi,
Did you get any error message when you tried opening or downloading the attachment?
Are you viewing attachments in Outlook Web App or Outlook desktop client? If you were using OWA when this issue happened, please have a look at this KB article and see if it applies:
https://support.microsoft.com/kb/2852113
Since this forum focus more on Office desktop client side questions, if it's an OWA issue in Office 365, I'd recommended you post a question in the Office 365 Community forum:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most
qualifiedpool
of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
ReportExportControl -- File is too large for attachment
Hi all,
Back with a exception again.
Few reports deployed on BOXIR2 SP4 comes with an error as following
com.crystaldecisions.report.web.viewer.ReportExportControl
15bf5ea9377e1c1.rtf File is too large for attachment.
Few reports take date range as input and generates result based on that. When date range is small report is generated without any problem. If is large and has large set of records(approx above 10K records) then comes up with the above error.
Another set of reports whatever be the case throws this error.
But when the parameters are set in CMS console and run in console report is generated without any problem what ever be the date range.
After searching a lot no solutions in hand!!
Please suggest solutions/possible scenarios / checklist to solve this issue.
Thanks & Regards
lnarayananIt turns out the report was so large it was basically overloading everything (disk space, cache sizes, timeouts, etc.) ... Here's the solution from the case:
1) For page server and cache server
Make sure location of Temp Files/Cache files has enough free space (more than 500 MB)
2) For page server and cache server
Minutes Before an Idle Connection is Closed = 90
3) For page server
Minutes Before an Idle Report Job is Closed = 90
4) For cache server
Maximum Simultaneous Processing Threads = automatic
5) In the command line of page server and cache server, add
"-requestTimeout 5400000" [without " "]
6) Maximum Cache Size Allowed (KBytes) = set it to an appropriate value (for e.g. for 500 Mb, value should be 500*1024 = 512000)
(This setting limits the amount of hard disk space used to store cached pages. If we need to handle large reports, a large cache size is needed. Maximum allowed is 2048 GB)
After all this, an "Error 500 - Java heap space" happened. The amount of memory allocated to a JVM application can be set using the options -Xms (the initial size) and -Xmx (the maximum size).
Regards,
Bryan -
Is there a format for a file that I can use for attaching a one page document with photos embedded that will open in everyone's email automatically? I've tried PDF and Word, but PDF worked only in Mail. Word worked in nothing. I also tried copying and pasting the document but lost all formatting when just copied and pasted in email. Is there a way to do this?
Are you sure PDF won't work? It should as what you're trying to do is pretty much what it is designed for (PDF - Portable Document Format). On a Mac anywone who receives the file should be able to see it in all its page layout glory by using the app Preview or Adobe Reader. Same on a PC, the file should be viewable as a PDF file using Adobe Reader and probably some other viewer (don't use PCs so not sure what other apps).
What application are you creating the file in and are you sure you're exporting it correctly in PDF format, fonts and images embedded? -
ABAP Server Proxy OR RFC - for attaching a file
Hello ABAP gurus,
Just to give a brief background, systems involved are ERP and PI
Certain Files (3 files to be exact) are generated in the ERP directory/file system
I need to transfer these files to PI "without" using the readily available FTP/NFS adapters (this is a limitation - no use of direct FTP is allowed)
Making the directory as a "shared" directory between ERP and PI is also not an option.
With the scenario above, I though of using an RFC or an ABAP Server Proxy to attach the said files to send them to PI
Which is the better way to do it?
I've seen a documentation for the ABAP Server Proxy that makes it possible to attach files to the proxy message, but for RFC I don't know if this is possible?
Your expert advise is highly appreciatedhI,
Use class CL_PROXY_CLIENT in the program and method IF_PROXY_CLIENT~EXECUTE.
You can refer documentation of this class as well as if you will search on any search portal using name of this class, you will get the briefe idea with the refernce procedure too.
Unfortunately I am unable to post you few links but try search on it, hopefully you will get it.
try below link.
<link to blocked site removed by moderator>
Edited by: Thomas Zloch on Oct 7, 2011 10:37 AM -
"File is too large for attachment." using the Viewer SDK
Post Author: CBurger
CA Forum: JAVA
I'm using the Viewer SDK to retrieve a report from BOE XI 2 SR2.
This is done via the a piece of Java code ...
ReportExportControl exportControl = new ReportExportControl();
ExportOptions exportOptions = new ExportOptions();
IReportSourceFactory psReportSourceFactory = (IReportSourceFactory) enterpriseSession.getService(ReportConstants.REPORT_PSREPORT_FACTORY);
Object reportSource = psReportSourceFactory.openReportSource(report.getID(), Locale.ENGLISH);
exportControl.setReportSource(reportSource);
exportControl.setURI(reportPath.toString());
exportControl.setExportOptions(exportOptions);
exportControl.setExportAsAttachment(true);
exportOptions.setExportFormatType(exportFormat);
exportControl.setParameterFields(reportParameters);
exportControl.processHttpRequest(request, response, getServlet().getServletConfig().getServletContext(), null);
exportControl.dispose();
The report is generated as an Excel file.
If I call for a small Excel - no problem: a dialog pops up asking me to "save as ..."
If I call for a larger Excel (about 20MB) - PROBLEM "File is too large for attachment."
Unfortunatly I don't find any information in the log files.
Any ideas?Has this ever been resolved? We are having a similar issue.
Thanks! -
Just started using my Mac Mail program instead of web mail. When I went to attach two pdf files, one attached as a file, the other inserted all the text into the body of the email message. How do I get it to attach both pdf's as files?
I think you're confusing two different things. If you attached PDF files and one of them displayed the PDF icon in the message window, that means it was more than one page. If you saw what appeared to be the actual document for the other PDF file, that means it's only one page and it's normal for it to display that way.
However, I seem to recall there may (or should) be a button at the bottom-right of the message window that allows you to display those files as icons, even if they're one page. If not, there's a third-party addition you can use to add that feature:
http://lokiware.info/Attachment-Tamer -
Sql Server configuration requirements for SAP ECC 6.0
Dear All,
I am using Sql server 2005 Enterprise as data store for Sap ecc 6.0.There are certain configuration requirements to be done while installing it so that sapinst.exe (sap installer) is able to use it to create its own DB's.
For eg it requires a collation of SQL_Latin1_General_CP850_BIN2 whereas the default that gets installed is SQL_Latin1_General_CP1_CI_AS.
Like this there are other requirements which I am not aware of.Most of the docs available on the Internet are talking of ecc 6.0 with Oracle 10.2G which is the most common combination.I am having docs for this combination.
I am installing ecc for the first time.
*I am unable to download docs from sap. marketplace as it requires a login given to certified users or sap purchasers.I am neither.*
Can anyone help me with this.If anyone has ECC 6.0 installation guide with sql server it will be serve my purpose.
Thanks for your efforts."Excuse me?
What he is doing is illegal , you know what that means, right? If you don't believe me, read the license that comes on the first installation DVD.
Actually, I even think it's kind of barefaced to ask in the forum of the software vendor for help! I mean, it's like asking in a bank forum how to rob and fraud the bank! You - and many others - may think that it's right and ok to do that. I tell you: it is not. Not for "home use", not for personal use, not at all.
You can use the software available here in the SDN to lean and study, that's why it's there.
If you deal at all with copied software, then just be smart enough to make other people not notice. He can be happy if he's not prosecuted (which would legally be possible)."
Do u understand what is legal or illegal? Have u read the license in full?
The license does not put any limit on the number of users.So if I am using it means that one more user has been added by the license holder.
Therefore there is nothing illegal about it.
It would have unethical (not illegal) if the software is being used for a business purpose other than for which it has been purchased.
Since it being used for training purpose the above does not hold good.
In fact it is SAP who is benefited in the long run bec' after a person learns it technology because he is going to implement it somewhere, for which the concerned user will have to purchase a license.Therefore I am helping SAP to increase its business.
But there are some stupid people who don't understand these things but are ready to shout at the top of their voice thinking themselves to be intelligent.
Edited by: coolmind26 on Jun 5, 2011 10:57 AM
Maybe you are looking for
-
10.5.8 Finder no longer remembers open windows in FileVaulted home director
I am having a strange problem since upgrading to 10.5.8 - in my FileVault home directory, the Finder no longer remembers which windows are open. Each time I log in, I get just a clean desktop no matter how many windows were open before. This does not
-
When I try to install security patch KB2525694 and KB978542 on my Windows Server 2008 R2 machine, I get the message "The Update is Not Applicable To Your Computer". I am using the following files: Windows6.1-KB978542-x64 (KB978542) Windows6.1-KB2525
-
Document Numbering Issue in user defined form
Dear All, There is UDO with manageseries = true. Series and DocNum fileds are binded to database (Combobox And Edittext). I can easly get next number and assign to Docnum field while selecting series from Combobox. The problem is when i choose series
-
How can I reinstall Mountain Lion?
I've been encountering random bugs every now and then and I'm planning to reinstall it again.
-
Logic won't start up after updating to 7.2.3
Hi guys, Sorry to bug you again with problems but I am stuck. I just updated to 7.2.3 and now logic will not start up at all. All I get is the "The application quit unexpectedly... Would you like to: Reopen ... When I look at the crash logs in the co