Configuration required on NWDi to use CAF

Hello Everybody,
What all configuration is required on NWDI, if I want to develop CAF rpject through NWDI?
Provide all installtion steps and configuration steps.
Thanks in Advance,
Bhavik

Hi,
I am very new to CAF environment. I need to extract extract data from xPD system to BW system. I know that xPD is the xApps CAF component. we have data in the portal server in J2EE(WAS.70). Now i want to communicate with xPD system to extract data.
Can you Pleas explain me what is the procedure to provide configuration in both J2EE Visual administrator and BW sides. If you provide this info, that its really helpful to me.
Thanks,

Similar Messages

Configuration requirements for adobe interactive using WD4A

Hi All,
 I am new to this technology and i am trying to create Webdynpro application but due to some configuration problem i am not able to see the layout editor in View. The error is "Page can not be displayed".
 There is same problem when i tried to open any standard SAP Web Dynpro application.
 Can anybody please guide me regarding the same?
Many Thanks,
Atul Patil.

Hi,
I can suggest you to refer the link...
http://help.sap.com/saphelp_erp2005/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm
And also refer the Note - 517484.
And also please check if you maintain IE settings - Tools - Internet Options - Connections - LAN Settings - Proxy Server - Advanced Settings - Exceptions - Do not use proxy server for addresses beginning with : ... maintain this entry with the IP Address of your EP IP Address.
Let's know if the same problem still persists.
Regards,
Raja Sekhar

Which permissions required for using CAF External Service Configuration?

Hello,
I have written an application service which invokes an external RFC. To this end, I have imported the desired RFC as external service and wrapped it as an application service.
However, when invoking this application service I get an error message that the external service has not been configured. I have learned that I have to use CAF's External Service Configuration tool.
Unfortunately, this tool complaints that I don't have the required administrator permissions. This happens even when I log in with the administrator account.
What do I do wrong?
Best regards
Alexander

I just have found the required role. It is role SAP_CAF_ADMIN.

Error in configuring NWDI - by using configuration wizard

Hello,
I have installed CE 7.1 and like to install NWDI. It requires me to execute some configuration wizards from administratio tool of the NW CE server. I am following the configuration guide for NWDI and initiated a "Change Management Service (CMS): Create an Application Skeleton". It asks me to provide a CMS URL when I give it http://localhost:50000 or http://cmsmain.localhost:50000 it give me an error that CMS is not running or the URL is not correct like this.
I got to know that CMS is builtin in NWDI and NWDI is builtin in NW CE 7.1. How to check whether CMS is installed. Or any idea to configure the NWDI.
Regards,
Naeem Khan

Hi Alexander,
You may be right. I am installed trial version for the moment. But I have installed ESR as additional comoponent which I have downloaded from Service Market Place. Let's try!!!!!
But the problem is that I have seen there are several components If I go Support Packages and Patches" -->SAP NetWeaver" -->SAP NETWEAVER" SAP EHP1 FOR SAP NW CE 7.1" -->Entry by Component" NW Development Infrastructure
what for components should I require from this site??? and how to deploy them on my server??? Unlike ESR there are SCA files which I am not sure how to deploy them on my server!!! If you know please let me know.
Regards,
Naeem

Configuring requirement : ordered item to absorb cost of free goods

Hello Friends,
I need to configure this in SAP SD.
The main item should accumulate the cost of the free goods.
I have set the cumulative indicator and deactivated pring for this item.
Do i still need to configure the stock value for the free goods as cost free item? Or is this step only applicable for
another scenario, like,
If I were to activate Pricing such that free goods is displayed as subitem and VPRS configured as cost and discount set to 100%
1. Set Item category to TANN using FREE usage AND
2. use condition type RL00 with requirement 55.
3. use pricing type B.
regards
Ravi

Read this SAP help at http://help.sap.com/saphelp_47x200/helpdata/en/dd/55fa4e545a11d1a7020000e829fd11/frameset.htm and the topic Free Goods in Sales and Distribution Processing for details.
Also go through each step of the configuration of the path at SPRO->Sales and distribution->basic functions->free goods.
Regards,

How to configure OraMTS to allow WCF using MSDTC access OracleDB On unix?

How to configure OraMTS to allow WCF using distributed transactions to access the ORACLE database On Linux/Unix ?
Env:
1. DB-tier node , ORACLE database (version: 11.2.0.1.0) on Redhat Linux server ;
2. middle-tier node ,Both the client, the MS DTC and Oracle MTS run on the same computer , Win7 x64 OS , installed .Netframework 4.0, ODP.net (ODAC112030), and configure the component services in a distributed transaction;
Has done the configuration:
1. ORACLE database on a Linux server (version: 11.2.0.1.0) has execute oramtsadmin.sql script;
2.ORACLE database on a Linux server (version: 11.2.0.1.0) has execute the following script, Creating an Access Control List (ACL);
BEGIN
-- Create the new ACL, naming it "OraMTSadmin.xml", with a description.
-- This provides the OraMTS administrative user e.g. MTSADMIN user FOO
-- the privilege to connect
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('OraMTSadmin.xml',
'Allow usage to the UTL network packages',
'ORAMTS', TRUE, 'connect');
-- Now grant privilege to resolve DNS names to the OraMTS administrative user
DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE('OraMTSadmin.xml' ,
'ORAMTS', TRUE,'resolve');
-- Specify which hosts this ACL applies to, in this case we are allowing
-- access to all hosts. if one knew the list of all Windows middle-tier,
-- these could be added one by one.
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('OraMTSadmin.xml','*');
END;
3. ORACLE database on a Linux server has set JOB_QUEUE_PROCESSES = 1000;
4. restart Oralce;
5.Test code as follows :
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using JetSun.Infrastructure;
using Microsoft.VisualStudio.TestTools.UnitTesting;
using JetSun.Infrastructure.ServiceModel;
using JetSun.DataModel.Cis;
using JetSun.TestFramework;
using System.IO;
using System.Data.EntityClient;
using System.Data.Objects;
using ConsoleApplicationTest;
using System.Transactions;
namespace Core.Tests
[TestClass]
public class EfOracleTest
public TestContext TestContext { get; set; }
[TestMethod]
public void GetEntities()
//string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=jetsun;PERSIST SECURITY INFO=True;USER ID=SYS;enlist=true";
string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=mtssys;PERSIST SECURITY INFO=True;USER ID=mtssys;enlist=true";
DbsSetting s = new DbsSetting(Dbs.IP, DbsProvider.Oracle, cn);
Runtime.SetDeploymentDir(TestContext.TestDeploymentDir);
File.Copy("E:\\VSTS\\MedicalHealth\\bin\\Debug\\DataModel.Cis.Oracle.dll", Path.Combine(TestContext.TestDeploymentDir, "DataModel.Cis.Oracle.dll"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.csdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.csdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.ssdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.ssdl"));
//File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.msl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.msl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.csdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.csdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.ssdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.ssdl"));
File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.msl", Path.Combine(TestContext.TestDeploymentDir, "Model1.msl"));
string connectionString = s.ToEdmConnectionString(typeof(EdmEncounter), false);
//// Initialize the EntityConnectionStringBuilder.
//EntityConnectionStringBuilder entityBuilder =
// new EntityConnectionStringBuilder();
////Set the provider name.
//entityBuilder.Provider = s.Provider.Provider;
//// Set the provider-specific connection string.
//entityBuilder.ProviderConnectionString = cn;
//// Set the Metadata location.
//entityBuilder.Metadata = string.Format(@"res://{0}/EdmDiagnose.csdl|res://{0}/EdmDiagnose.ssdl|res://{0}/EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@".\Model1.csdl|.\Model1.ssdl|.\Model1.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//connectionString = entityBuilder.ToString();
////using (Entities edm = new Entities(connectionString))
//// foreach (var item in edm.ENCOUNTERs.Take(10))
//// Console.WriteLine("{0}\t{1}", item.ENCOUNTERID, item.DISPLAYNAME);
//entityBuilder.Metadata = string.Format(@"res://*/EdmDiagnose.csdl|.\EdmDiagnose.ssdl|.\EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
//entityBuilder.Metadata = string.Format(@"res://{0}/", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
connectionString = s.ToEdmConnectionString(typeof(EdmFeeInfo), false);
try
//using (TransactionScope tx = new TransactionScope())
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required, new TimeSpan(0, 0, 30)))
//using (var dbcn = s.Provider.CreateConnect(connectionString))
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
//edm.Connection.CheckOpen();
//using (edm.Connection.BeginTransaction())
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
item.Amount = item.Amount * -1;
edm.SaveChanges();
// using (EdmFeeInfo edm2 = new EdmFeeInfo(connectionString))
// edm2.Connection.CheckOpen();
// edm2.Connection.EnlistTransaction(Transaction.Current);
// foreach (var item in edm2.FeeInfos.Take(100))
// item.Amount = item.Amount * -1;
// edm2.SaveChanges();
// throw new NotImplementedException();
TestContext.WriteLine("-----------1---------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
throw new NotImplementedException();
catch (Exception ex)
TestContext.WriteLine((ex.InnerException ?? ex).Message);
TestContext.WriteLine("-------------2-------------");
using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
foreach (var item in edm.FeeInfos.Take(100))
TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
6. the test results are as follows:
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
4 234
无法列入分布式事务处理（Could not be included in the Distributed Transaction）
-------------2-------------
4 125
4 835.45
4 3458
4 2350
4 200
4 100
4 300
4 123
The main error message:无法列入分布式事务处理（Could not be included in the Distributed Transaction） , not use distributed transaction everything is normal.
My test environment MS DTC and Oracle MTS Recovery Service run on the same computer, but OracleMTSRecoveryService registry values under£º HKEY_LOCAL_MACHINE \ SOFTWARE \ Wow6432Node \ ORACLE \ OracleMTSRecoveryService ,not under HKEY_LOCAL_MACHINE \ SOFTWARE \ ORACLE,I do not know that there is no relationship.
Is not configured incorrectly?Who can help me, thank you very much!

Do you really have a requirement to push data from Oracle to Access rather than pulling data from Oracle to Access? It would be exceptionally unusual to push data from Oracle to Access.
Pushing from Oracle to Access would means that you want some Oracle process running that is updating Access. But you said that your Access database was on your "local desktop" which implies that it is not running on a server where it is always available. So that means that the Oracle process is going to regularly encounter (and report) errors because the Access database is not available. In turn, that's going to mean that your push process is either going to cause the underlying transaction to fail or it's going to mean that the push process is going to have to implement a fair amount of code to queue data to be pushed at a later date (and track all those changes) which is no small task. None of that seems particularly pleasant.
On the other hand, Access is designed to pull data from real relational databases like Oracle. That's the far more normal approach architecturally. It doesn't require an Oracle process, it doesn't generate errors on the Oracle database when the local desktop is down, etc.
And, of course, I'm assuming that introducing Access is even architecturally reasonable. Most organizations would be extremely hesitant to allow data from an Oracle database to get moved into Access because that quickly means that they lose control of the data from a security standpoint, that there are now multiple copies of the data floating around when changes & corrections are made, etc. That causes all sorts of headaches normally above and beyond the headaches that pushing from Oracle to Access would create.
Justin

CONCURRENT MANAGER SETUP AND CONFIGURATION REQUIREMENTS IN AN 11I RAC ENVIR

제품 : AOL
작성날짜 : 2004-05-13
PURPOSE
RAC-PCP 구성에 대한 Setup 사항을 기술한 문서입니다.
PCP 구현은 CM의 workload 분산, Failover등을 목적으로 합니다.
Explanation
Failure sceniro 는 다음 3가지로 구분해 볼수 있습니다.
1. The database instance that supports the CP, Applications, and Middle-Tier
processes such as Forms, or iAS can fail.
2. The Database node server that supports the CP, Applications, and Middle-
Tier processes such as Forms, or iAS can fail.
3. The Applications/Middle-Tier server that supports the CP (and Applications)
base can fail.
아래부분은 CM,AP 구성과
CM과 GSM(Global Service Management)과의 관계를 설명하고 있습니다.
The concurrent processing tier can reside on either the Applications, Middle-
Tier, or Database Tier nodes. In a single tier configuration, non PCP
environment, a node failure will impact Concurrent Processing operations do to
any of these failure conditions. In a multi-node configuration the impact of
any these types of failures will be dependent upon what type of failure is
experienced, and how concurrent processing is distributed among the nodes in
the configuration. Parallel Concurrent Processing provides seamless failover
for a Concurrent Processing environment in the event that any of these types of
failures takes place.
In an Applications environment where the database tier utilizes Listener (
server) load balancing is implemented, and in a non-load balanced environment,
there are changes that must be made to the default configuration generated by
Autoconfig so that CP initialization, processing, and PCP functionality are
initiated properly on their respective/assigned nodes. These changes are
described in the next section - Concurrent Manager Setup and Configuration
Requirements in an 11i RAC Environment.
The current Concurrent Processing architecture with Global Service Management
consists of the following processes and communication model, where each process
is responsible for performing a specific set of routines and communicating with
parent and dependent processes.
아래 내용은 PCP환경에서 ICM, FNDSM, IM, Standard Manager의 역활을 설명하고
있습니다.
Internal Concurrent Manager (FNDLIBR process) - Communicates with the Service
Manager.
The Internal Concurrent Manager (ICM) starts, sets the number of active
processes, monitors, and terminates all other concurrent processes through
requests made to the Service Manager, including restarting any failed processes.
The ICM also starts and stops, and restarts the Service Manager for each node.
The ICM will perform process migration during an instance or node failure.
The ICM will be
active on a single node. This is also true in a PCP environment, where the ICM
will be active on at least one node at all times.
Service Manager (FNDSM process) - Communicates with the Internal Concurrent
Manager, Concurrent Manager, and non-Manager Service processes.
The Service Manager (SM) spawns, and terminates manager and service processes (
these could be Forms, or Apache Listeners, Metrics or Reports Server, and any
other process controlled through Generic Service Management). When the ICM
terminates the SM that
resides on the same node with the ICM will also terminate. The SM is ？hained?
to the ICM. The SM will only reinitialize after termination when there is a
function it needs to perform (start, or stop a process), so there may be
periods of time when the SM is not active, and this would be normal. All
processes initialized by the SM
inherit the same environment as the SM. The SM environment is set by APPSORA.
env file, and the gsmstart.sh script. The TWO_TASK used by the SM to connect
to a RAC instance must match the instance_name from GV$INSTANCE. The apps_<sid>
listener must be active on each CP node to support the SM connection to the
local instance. There
should be a Service Manager active on each node where a Concurrent or non-
Manager service process will reside.
Internal Monitor (FNDIMON process) - Communicates with the Internal Concurrent
Manager.
The Internal Monitor (IM) monitors the Internal Concurrent Manager, and
restarts any failed ICM on the local node. During a node failure in a PCP
environment the IM will restart the ICM on a surviving node (multiple ICM's may
be started on multiple nodes, but only the first ICM started will eventually
remain active, all others will gracefully terminate). There should be an
Internal Monitor defined on each node
where the ICM may migrate.
Standard Manager (FNDLIBR process) - Communicates with the Service Manager and
any client application process.
The Standard Manager is a worker process, that initiates, and executes client
requests on behalf of Applications batch, and OLTP clients.
Transaction Manager - Communicates with the Service Manager, and any user
process initiated on behalf of a Forms, or Standard Manager request. See Note:
240818.1 regarding Transaction Manager communication and setup requirements for
RAC.
Concurrent Manager Setup and Configuration Requirements in an 11i RAC
Environment
PCP를 사용하기위한 기본적인 Setup 절차를 설명하고 있습니다.
In order to set up Setup Parallel Concurrent Processing Using AutoConfig with
GSM,
follow the instructions in the 11.5.8 Oracle Applications System Administrators
Guide
under Implementing Parallel Concurrent Processing using the following steps:
1. Applications 11.5.8 and higher is configured to use GSM. Verify the
configuration on each node (see WebIV Note:165041.1).
2. On each cluster node edit the Applications Context file (<SID>.xml), that
resides in APPL_TOP/admin, to set the variable <APPLDCP oa_var="s_appldcp">
ON </APPLDCP>. It is normally set to OFF. This change should be performed
using the Context Editor.
3. Prior to regenerating the configuration, copy the existing tnsnames.ora,
listener.ora and sqlnet.ora files, where they exist, under the 8.0.6 and iAS
ORACLE_HOME locations on the each node to preserve the files (i.e./<some_
directory>/<SID>ora/$ORACLE_HOME/network/admin/<SID>/tnsnames.ora). If any of
the Applications startup scripts that reside in COMMON_TOP/admin/scripts/<SID>
have been modified also copy these to preserve the files.
4. Regenerate the configuration by running adautocfg.sh on each cluster node as
outlined in Note:165195.1.
5. After regenerating the configuration merge any changes back into the
tnsnames.ora, listener.ora and sqlnet.ora files in the network directories,
and the startup scripts in the COMMON_TOP/admin/scripts/<SID> directory.
Each nodes tnsnames.ora file must contain the aliases that exist on all
other nodes in the cluster. When merging tnsnames.ora files ensure that each
node contains all other nodes tnsnames.ora entries. This includes tns
entries for any Applications tier nodes where a concurrent request could be
initiated, or request output to be viewed.
6. In the tnsnames.ora file of each Concurrent Processing node ensure that
there is an alias that matches the instance name from GV$INSTANCE of each
Oracle instance on each RAC node in the cluster. This is required in order
for the SM to establish connectivity to the local node during startup. The
entry for the local node will be the entry that is used for the TWO_TASK in
APPSORA.env (also in the APPS<SID>_<HOSTNAME>.env file referenced in the
Applications Listener [APPS_<SID>] listener.ora file entry "envs='MYAPPSORA=<
some directory>/APPS<SID>_<HOSTNAME>.env)
on each node in the cluster (this is modified in step 12).
7. Verify that the FNDSM_<SID> entry has been added to the listener.ora file
under the 8.0.6 ORACLE_HOME/network/admin/<SID> directory. See WebiV Note:
165041.1 for instructions regarding configuring this entry. NOTE: With the
implementation of GSM the 8.0.6 Applications, and 9.2.0 Database listeners
must be active on all PCP nodes in the cluster during normal operations.
8. AutoConfig will update the database profiles and reset them for the node
from which it was last run. If necessary reset the database profiles back to
their original settings.
9. Ensure that the Applications Listener is active on each node in the cluster
where Concurrent, or Service processes will execute. On each node start the
database and Forms Server processes as required by the configuration that
has been implemented.
10. Navigate to Install > Nodes and ensure that each node is registered. Use
the node name as it appears when executing a nodename?from the Unix prompt on
the server. GSM will add the appropriate services for each node at startup.
11. Navigate to Concurrent > Manager > Define, and set up the primary and
secondary node names for all the concurrent managers according to the
desired configuration for each node workload. The Internal Concurrent
Manager should be defined on the primary PCP node only. When defining the
Internal Monitor for the secondary (target) node(s), make the primary node (
local node) assignment, and assign a secondary node designation to the
Internal Monitor, also assign a standard work shift with one process.
12. Prior to starting the Manager processes it is necessary to edit the APPSORA.
env file on each node in order to specify a TWO_TASK entry that contains
the INSTANCE_NAME parameter for the local nodes Oracle instance, in order
to bind each Manager to the local instance. This should be done regardless
of whether Listener load balancing is configured, as it will ensure the
configuration conforms to the required standards of having the TWO_TASK set
to the instance name of each node as specified in GV$INSTANCE. Start the
Concurrent Processes on their primary node(s). This is the environment
that the Service Manager passes on to each process that it initializes on
behalf of the Internal Concurrent Manager. Also make the same update to
the file referenced by the Applications Listener APPS_<SID> in the
listener.ora entry "envs='MYAPPSORA= <some directory>/APPS<SID>_<HOSTNAME>.
env" on each node.
13. Navigate to Concurrent > Manager > Administer and verify that the Service
Manager and Internal Monitor are activated on the secondary node, and any
other addititional nodes in the cluster. The Internal Monitor should not be
active on the primary cluster node.
14. Stop and restart the Concurrent Manager processes on their primary node(s),
and verify that the managers are starting on their appropriate nodes. On
the target (secondary) node in addition to any defined managers you will
see an FNDSM process (the Service Manager), along with the FNDIMON process (
Internal Monitor).
Reference Documents
Note 241370.1

What is your database version? OS?
We are using VCP suite for Planning Purpose. We are using VCP environment (12.1.3) in Decentralized structure connecting to 3 differect source environment ( consisting 11i and R12). As per the Oracle Note {RAC Configuration Setup For Running MRP Planning, APS Planning, and Data Collection Processes [ID 279156]} we have implemented RAC in our test environment to get better performance.
But after doing all the setups and concurrent programs assignment to different nodes, we are seeing huge performance issue. The Complete Collection which takes generally on an avg 180 mins in Production, is taking more than 6 hours to complete in RAC.
So I would like to get suggestion from this forum, if anyone has implemented RAC in pure VCP (decentralized) environment ? Will there be any improvement if we make our VCP Instance in RAC ?Do you PCP enabled? Can you reproduce the issue when you stop the CM?
Have you reviewed these docs?
Value Chain Planning - VCP - Implementation Notes & White Papers [ID 280052.1]
Concurrent Processing - How To Ensure Load Balancing Of Concurrent Manager Processes In PCP-RAC Configuration [ID 762024.1]
How to Setup and Run Data Collections [ID 145419.1]
12.x - Latest Patches and Installation Requirements for Value Chain Planning (aka APS Advanced Planning & Scheduling) [ID 746824.1]
APSCHECK.sql Provides Information Needed for Diagnosing VCP and GOP Applications Issues [ID 246150.1]
Thanks,
Hussein

Sql Server configuration requirements for SAP ECC 6.0

Dear All,
I am using Sql server 2005 Enterprise as data store for Sap ecc 6.0.There are certain configuration requirements to be done while installing it so that sapinst.exe (sap installer) is able to use it to create its own DB's.
For eg it requires a collation of SQL_Latin1_General_CP850_BIN2 whereas the default that gets installed is SQL_Latin1_General_CP1_CI_AS.
Like this there are other requirements which I am not aware of.Most of the docs available on the Internet are talking of ecc 6.0 with Oracle 10.2G which is the most common combination.I am having docs for this combination.
I am installing ecc for the first time.
*I am unable to download docs from sap. marketplace as it requires a login given to certified users or sap purchasers.I am neither.*
Can anyone help me with this.If anyone has ECC 6.0 installation guide with sql server it will be serve my purpose.
Thanks for your efforts.

"Excuse me?
What he is doing is illegal , you know what that means, right? If you don't believe me, read the license that comes on the first installation DVD.
Actually, I even think it's kind of barefaced to ask in the forum of the software vendor for help! I mean, it's like asking in a bank forum how to rob and fraud the bank! You - and many others - may think that it's right and ok to do that. I tell you: it is not. Not for "home use", not for personal use, not at all.
You can use the software available here in the SDN to lean and study, that's why it's there.
If you deal at all with copied software, then just be smart enough to make other people not notice. He can be happy if he's not prosecuted (which would legally be possible)."
Do u understand what is legal or illegal? Have u read the license in full?
The license does not put any limit on the number of users.So if I am using it means that one more user has been added by the license holder.
Therefore there is nothing illegal about it.
It would have unethical (not illegal) if the software is being used for a business purpose other than for which it has been purchased.
Since it being used for training purpose the above does not hold good.
In fact it is SAP who is benefited in the long run bec' after a person learns it technology because he is going to implement it somewhere, for which the concerned user will have to purchase a license.Therefore I am helping SAP to increase its business.
But there are some stupid people who don't understand these things but are ready to shout at the top of their voice thinking themselves to be intelligent.
Edited by: coolmind26 on Jun 5, 2011 10:57 AM

Error during Checking Network Configurations Requirements in RHEL3 VM

Hi,
I have a Red Hat Enterprise Linux Image Virtual Machine on my desktop which uses Fedora Linux. I have set this up using VMplayer.
I need to install Oracle 10g on the RHEL VM.
As the RHEL VM does not have X Windows, I am connecting to it from the Fedora Linux to do the installation.
During the Product-specific Prerequisite checks:
Checking Network Configurations Requirements throws an error,
Please find it below:
Actual Result: Unknown Host Exception has Occured :rhel3vm:rhel3vm
Check complete: The overall result of this check is: Not executed <<<<
Recommendations: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle software to function properly.
The Fedora Linux gets the IP address from the DHCP and allocates an IP address to the VM.
However, when we set both of them as static and the problem still persists, and also when we set the fedora as dynamic and RHEL VM as static, the issue is not resolved.
Any help will be truely appreciated. Thank you.

We were running a non-DHCP (static IP) configuration and ran into this issue. We discovered that the hostname and FQDN were not correctly specified in the /etc/hosts file.
Fixing the hosts file to correctly reference the IP resolved the issue.
Hope this helps...
-john

Network Configuration requirements not executed, why?

During installation all checks are passed but this one, is there any particular reason for this check not to be executed? Should I worry over it not beein executed?
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
I'm trying to install Oracle 10g 2 on a Red Hat 4 server with a static IP.

Hi!
Either your machine is setup to use DHCP after all or the installer just has trouble to find the correct information.
Recheck the network settings of your machine (redhat-config-network).
Just ignore the warning and continue.
cu
Andreas

Network configuration requirements 10g

hi every body
i am trying to install oracle 10 g db using Vmware on Centos 5.
i have performed all the steps as described in installation guides but when OUI is checking pre reqs it is giving this error
"checking network configuration requirements" and then "not executed"
can somebody please specify these requirements ???
in case i want to move forward it says that you can expect some problems during installation ???
thnx in advance .
Regards

do you have a network setup ? Can you ping other servers from the VM ?
You can run a database without a network. The listener configuration may fail, but you can easily re-run it later. You could just do the install, and see if anything else fails. If it does, the error may give more information.
Or you can turn off the check using
runInstaller -ignoreSysPrereqs

Using CAF GP for Approving MDM Record Request.

I am going to use CAF GP for approval workflow.
I need to understand how to approvve the record using Java API. I know it needs to be moved from checked out stage to Checked in stage. But how do we do that from Java APIs.
I am using SP4 for now, but need the information for SP6 too.
~Nitin

If you look at your process description:
Requestor - Submit a request - store in MDM in checked out mode.
[Create a webdynpro callable object implementing IGPWebDynproCO|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e3f07a7a-0601-0010-ebbd-b9cfb445b814]
Have it use the checkout(new)recordCommand (this works similar as the checkincommand I described above)
Have validation at MDM to take care of all the required parameters/fields.
Approver - Approves > Change the record to check in
Use checkin as described above
Rejects > Delete the record.
For Reject you probably do not wantto delete the record but use the rollback command.
[Here some more info on how to create a GP with Webdynpro COs|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0957cb6-5103-2a10-6d9d-a0a4d68c8bf1]
This should get you started. You'll run into more questions though

Why Do The Latest Versions Of Soundtrack and Soundtrack Pro Use .caf Files?

About 3 years ago Soundtrack and Soundtrack Pro started using .caf files instead of .aif ones.
The .caf files appear to take up more space than .aif and of course need rendering before they can be used in FCE/FCP.
So what is the logic behind their use?
I would add that I have skimmed through several articles which claim they have advantages ..... which I can't understand.
I only know that when used normally in FCE/FCP they seem to me a backward step, requiring rendering - almost like using .mp3 but without the space-saving features.
Message was edited by: Ian R. Brown

Here's a link from Apple:
http://developer.apple.com/DOCUMENTATION/MusicAudio/Reference/CAFSpec/CAFoverview/CAFoverview.html
It touts "unrestricted file size" as one advantage of CAFs. Has any of us ever exceeded the supposed 4GB limit of AIF files?? This is from the page linked above:
"Whereas AIFF, AIFF-C, and WAV files are limited in size to 4 gigabytes, which might represent as little as 15 minutes of audio, CAF files use 64-bit file offsets, eliminating practical limits. A standard CAF file can hold audio data with a playback duration of hundreds of years."

What is required in order to use ALEAUDIT for Idocs?

Hi Friends
What is required in order to use ALEAUDIT for Idocs?
Regards
Sam

Hi Samuel,
Check out this blog..
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Hope this will help.
Let us know if you need more details.
Nilesh

Configuring weblogic domain for IAM using WLST

Hi All,
i have to configure a weblogic domain using wlst(off-line).i am able to do this by using wls.jar template but that domain does not contain all the deployable component which is required for IAM ,IDM.
I don't know how to set the configuration component which is required for IAM,IDM as asked configuration wizard aske when we use GUI mode and how to give the schema details.
please give any idea how to configure a domain(for IAM,IDM) using WLST exactly same as GUI mode .
thanks

I'm not sure what is your problem, but there is no compatibility issue between CSS and Bind normally.
The docuement you referenced only says, in the background section, that the DNS server itself needs to be configured so part of your domain is handled by the CSS.
So, your dns server handles all request for your.domain but there is one NS entry forwarding request for www.your.domain to the CSS so the CSS can answer the dns request.
The css is not able to handle all types of dns request (ie: email server ip address request) so you can configure a 'dns forwarder' on the css to forward the request to another dns server.
See the following for dns forwarder config example
http://www.cisco.com/en/US/products/hw/contnetw/ps789/products_configuration_example09186a00801d3b52.shtml
Regards,
Gilles.
Thanks for rating.

Configuration required on NWDi to use CAF

Similar Messages

Maybe you are looking for