Configuration SAP Solution Manager TCode-SOLMAN_SETUP Initial Configuration

Hi,
I am running the TCode: Solman_Setup for Basic Configuration in Solman 7.0 EHP1.
In "Initial Configuration" -> Technical Configuration after clicking Configure button facing following error. Pls Suggest.
System SM1 does not exist & E::000
Regards
Praveen K

E::000 basically means that the system is trying to show an error message "000" from a specific error message set.This problem is caused by a program error. If the authorization check fails, no relevant error message is displayed.
have you created any system by the name SM1 in SMSY?
Regards,
Rajeev

Similar Messages

  • Sap Solution Manager 7.1 SP11 Basic Configuration

    Hi Experts,
    I am in fresh installation for Sap Solution Manager 7.1 SP11. At Basis Configuartion Phase in step " Configure CA Introscope".
    I have successfully installed, but it shows the following message: " Offline - The EM Connection cannot be established (caused by :com.sap.smd.introscope.em.IntroscopeException: java.lang.reflect.InvocationTargetException_) "
    Need suggestions how to proceed from here.
    thanks

    Raja,
    I assume you're using Linux/UNIX.
    Here's the solution. It worked for me.
    In /usr/sap/ccms/apmintroscope/config/users.xml, update the Guest password with this MD5 hash: c4582df82299e0581a9fc6bb34c53
    In user management screen of "Configure CA Introscope", choose "Guest" as connection user with password "guest12" (without quotation marks)
    If it's still not working, then delete the EM and re-install the introscope.
    Go to expert mode -> Delete references -> Remove the line
    Delete folder /usr/sap/ccms/apmintroscope
    Install introscope and management modules againdon't forget to re-set the permission for diagnostic agent user
    Go back to solman_setup "Configure CA Introscope" and do import CA again
    Save, you'll have a green status
    Regards,

  • SAP EHP 1 for SAP Solution Manager 7.0 configuration check

    Hi All,
    I have configured my SAP EHP 1 for SAP Solution Manager 7.0 according to the guide. Now i would like to test my configuration. Please provide me with a check list and test scenarios.

    SOLMAN_SETUP will guide you to setup SOLMAN, after you setup you gotta make sure that everything is green or resolve the errors.
    SMSY---> Ssystem Check RFC Connections,check the SLDCHECK.
    Refer to OPERATIONS GUIDE under INSTGUIDES, which is very detailed.
    Thanks
    SM

  • Configuration for Central Monitoring System in SAP Solution Manager.

    Hi Folks,
    I am trying to setup Central System Monitoring in SAP Solution Manager, I am following the document which mention the step by step instructions.
    There are couple of items on which  I am really confused.
    In the documentation it says to activate Background Dispatching & Central System dispatching in 000 client of Solution Manager,
    it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
    Can you guys please help me to configure properly?
    One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
    Also, is there any document which clearly explains the setup of  Central System Monitoring in SAP Solution manager using both approaches and also to test the monitoring?
    I have SAP Solution Manager 7.0 EHP1.
    Thanks.
    Jennifer

    Hi,
    >
    > it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
    >
    You should created this user in working client.
    > Can you guys please help me to configure properly?
    >
    > One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
    >
    You can use RZ21 or System monitoring through work center. From Solution manager 7.1, you need to use work center only. So, I would suggest you to use work center only.
    Thanks
    Sunny

  • Configure ECC 6.0 EHP4 in SAP Solution Manager SP15

    Hi all,
    I just upgrade a system from R/3 4.6c to SAP ECC 6.0 EHP4 NW 7.01. I want to configure the system in SAP Solution Manager just upgraded to SP15. But I don't understand how I must to configure the system and to assign a logical component. It seems not to be the same possibilities between System configuration and Logical configuration.
    For system configuration I can choose product version EHP4 FOR SAP ERP 6.0 / NW7.01 and a full list of usage type
    For logical component I only found product SAP ERP ENHANCE PACKAGE and a very short list of version and usage type (??)
    Is someone know if it is normal or if it is necessary to patch solution manager ?
    Is ther a documentation existing to configure ERP EHP4 systems ??
    Thanks for your answer.
    Regards
    Gerard

    I have not seen any document to configure EHP4 systems specfically.
    I do not think, Solman SP15 should create any problem in that. But, since you are upgrading your landscape to EHP4, so why leave solman to SP15 instead of Ehp1 (SP18/19/20)...
    You might want to have a glance over some notes
    Note 1283307 - SMSY: Product version cannot be determined correctly
    Note 1301106 - SMSY: Enhancements and errors in Enhancement Package 1
    Note 1320545 - Updating the product version in SMSY

  • Mail configuration in SAP SOLUTION MANAGER 7.1

    Hi All,
    I am working on SMTP (Mail)Configuration in SAP Solution Manager 7.1. And our mail host is GOOGLE APPS.
    Does any one had configured mail in SAP for hosted on GOOGLE APPS? 
    Does SAP will support this as it is external (mail) server?
    I read note 455140, related notes and configured accordingly.
    Steps I followed:
    1. parameters maintained:
    icm/server_port_2 = PROT=SMTP,PORT=25000,TIMEOUT=180
    is/SMTP/virt_host_0 = *:25000;
    2. User maintained: Dialog user with S_A.SCON profile with user address as username@<companyname>.com
    3.Client Assignment: (SICF): a. Host Data:Profile Parameter Number: is/SMTP/virt_host_0
    b. Service data: Client 100, user: username, password: ***, language: EN.
    c. Handler List: CL_SMTP_EXT_SAPCONNECT in the first position
    Saved Changes n Activated.
    4.SAPconnect administration (SCOT):
    a. Default domain: <companyname>.com
    b. Nodes: SMTP Under node:
    Mail Host: smtp.gmail.com
    Mail Port: 25 and also tried 587
    In Internet Address Area: *
    5.Scheduled periodic Job with SAP&CONNECTALL variant
    6. telnet <HOSTNAME> 25000 is successful
    In both cases I am getting error as:
    No delivery to ishan.sangai@<companyname>.com, authentication required
    Message no. XS853
    Diagnosis
    The message was processed successfully in the SAP system. The mail server that is supposed to receive the message for further processing requires authentication. The SAP system does not support this procedure. As a result, the message was not delivered to recipient ishan.sangai@<companyname>.com.
    Information from External System
    _530 5.7.0 Must issue a STARTTLS command first. p1admin@<companyname>.com
    Procedure
    The administration settings must be changed. The specified mail server must not request authentication.
    7. I tried to telnet smtp.gmail.com 25 and 587 also
    I am getting following output:
    220 mx.google.com ESMTP ds5sm2193379ibb.5
    HELO <HOSTNAME>
    250 mx.google.com at your service
    HELO <companyname>.com
    250 mx.google.com at your service
    MAIL FROM solman_admin@<companyname>.com ENVID=12345
    530 5.7.0 Must issue a STARTTLS command first. ds5sm2193379ibb.5
    Does we need to talk with Google Apps provider for any modifications to be made for this.
    if yes, which changes should I request them?
    Please help me to solve this problem.
    Please provide links,guides.notes etc. for this scenario
    Thanks & Regards,
    Ishan

    Hi we are configuring Google SMTP getting below error..
    No delivery to xxx.com, authentication required
    Message no. XS856
    Diagnosis
    The message was processed successfully in the SAP system. The mail server that is to receive the message for further processing requires authentication. Probably there is no logon data specified in the SAPconnect configuration.
    Information from external system (if available)
    smtp.gmail.com:587
    530 5.7.0 Must issue a STARTTLS command first. i91sm11178241qgd.25 - gsmtp
    Procedure
    Enter the logon data in the SAPconnect node.
    Using Gmail SMTP server using "smtp.gmail.com" with port 587
    Please advise.
    Regards,
    Sudarshan

  • How to configure dba cockpit in sap solution manager

    Hello colleagues,
    how to configure dba cockpit in sap solution manager??
    Thanks!

    Hi Victor,
    Please go through this doc, it might helps you.
    Sap Solution Manager - Dbacockpit
    Sap Solman Instguide Dba Cockpit Setup
    Regards
    Amit

  • Configuration information is only available in SAP Solution Manager.

    Configuration information is only available in SAP Solution Manager.
    I always read about this.
    But how find it in the sol man system actually?
    Thanks very much.

    Hi
    do you mean IMG configuration of ABAP scenarios?
    when you create the project in solution manager you can see all its configuration information on the tabs(TA Solar_project_Admin)
    for the ABAP scenarios, executable configuration files (IMGs) are available. SAP Solution Manager has the capability of executing the ABAP scenarios IMG files during the configuration and management of the system landscape(TA Solar02)
    I could suggest please go the link service.sap.com/solutionmanager.for needed informantion
    Jansi

  • Configuration Guide in SAP Solution Manager

    Hi all,
    I'm reading documentation on a CRM scenario (Investigative Case Management : ICM). It says that the ICM configuration guide is assigned to the scenario 'Criminal Investigation Processing' (Public Security) in the SAP Solution Manager.
    I don't have access to the SAP Solution Manager but wanted to know if I could find this ICM configuration guide somewhere on the SAP Market Place.
    Alternatively, if I could access a SAP solution Manager system, how could I access this ICM configuration guide?
    Thanks a lot in advance
    Best regards
    Stephanie

    Hi
    this will solve ur prob
    https://websmp210.sap-ag.de/~sapdownload/011000358700000478762009E/HowToCreateConfGuide.pdf
    Regards
    Prakhar

  • Configuration Guide Job Scheduling Management with SAP Solution Manager

    Dear Gurus
    Could you please help me with the configuration guide of the Job Scheduling Management with SAP Solution Manager
    Best Regards

    Hello Luis,
    the configuration activities can be accessed via the "Implementatiopn Guide" by calling transaction SPRO in your SAP Solution Manager system.
    In SPRO navigate to -> SAP Solution Manager -> Scenario-Specific Settings -> Job Scheduling Management -> Standard Configuration and execute the following two activities.
    1. Activate Solution Manager Services
    2. Set Up Work Center for Job Scheduling Management
    Make sure that your user has role SAP_SM_SCHEDULER_EXE (or_ADMIN) assigned.
    Afterwards you should be able to access the Job Management Work Center and to create Job Documentation or to import Jobs from a Managed System into new Job Documentations.
    The following SAP notes might be usefuly as well:
    1054005  - FAQ on Job Scheduling Management
    1117355  - Work Center roles
    Kind regards,
    Martin
    http://service.sap.com/jsm

  • What is exactly a IBASE in SAP Solution manager

    Dear all
    I'm making the configuration of service desk on SAP Solution manager, and then i have to make a set up of IBASE. Can anyone tel me what exactly is IBASE in solution manager?
    thanks
    Edited by: hchabi on Apr 1, 2010 1:45 PM

    Hi
    In solman you have SOL_MAN_DATA_REP as main IBASE or 1 and other managed systems will be attached to it as a component.
    and you can check it in IB53 by entering "1" in the initial screen
    For automatic generation you can use tcode IB_GEN and all the connected systems ibase will be generated and attached to ur ibase
    Morever theoretically,
    An installed base can be described as a multilevel structure of installed base components for managing objects (for example, devices, machines, software) that are installed, or are going to be installed on site at the customer site. An installed base can represent the reference basis for services.
    An installed base describes the hierarchical structure of these objects and their individual parts (components
    In business processes, an installed base can be referred to as a general unit or as an individual element (component).
    The set of installed objects at the customeru2019s can be used, for example:
    ·        To determine the exact object for which a problem has been reported
    ·        To determine in detail what the transaction (for example, visit by field service representative, repair by a service employee) refers to
    ·        By the service employee as information about which object is affected and the parts it consists of
    ·        For documenting changes made to objects
    Hope it helps and doubt is cleared
    Regards
    Prakhar

  • Upgrade to SAP Solution Manager 3.2 to 7.0 EHP

    Dear Experts
    At present I am using SAP Solution manager 3.2. Now I am planing to update SAP Solution Manager 7.0.
    I am some confutation in SAP Solution Manager 7.0 and SAP Solution Manager 7.0 EHP1,
    what i do please help me.
    Regards
    Sanjay C.

    EHP1 is basically a product enhancement of 700 - i.e offers new functionality
    Usually to get to Enhancement packages you need to be operating NW2004S stack based product - in this case 4.0 (now called Solution Manager 7.0)
    I think this proposal will require first an upgrade from 3.2 to 4.0
    then after applying Enhancement Package EHP1 and following pre-reqs for both steps
    Also bearing in mind that Solution Manager is RFC dependant any change in SID, Hostname or client will require
    all RFC connections will need to be adapted
    There may also be special considerations depending on source configuration or the active Solution Manager scenarios and content
    I would take a look at following PDF for reference - it may help in the initial 3.2-->4.0 upgrade
    http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&_OBJECT=011000358700000208052007E
    Best wishes
    Stuart

  • Launch CRM 7.0 from SAP Solution Manager

    We are buiding the BPH in SAP Solution Manager and would like to store the CRM Business Processes in it as well. Therefore we'll also store the TCodes under the "Transaction" Tab.
    Now, i understand that CRM 7.0 uses a web GUI for configuring TCodes. If we launch the TCode from SAP Solution Manager, does it launch a browser with the right IMG Object for the TCode? How does this work?
    Anyone offer any suggestions/thoughts?
    Thank you, in advance.

    Dear Ramesh,
    I'm pretty sure that it's possible to launch CRM web GUI components from Solution Manager. You can assign BSP Applications to process steps and launch them.
    Most of the configuration in CRM 7.0 is still done via SAP GUI. I think it's only the UI view configuration that can be done in web GUI. However, if you find out which BSP application it is, you should be able to assign it to process steps in the configuration tab. It's done in the same way like assigning TCodes; just use type BSP_APPLICATION instead of BMTA.
    Best regards
    Jens

  • Upload of Test Cases in SAP Solution Manager.

    Hello,
    I am trying to create a project and its component in SAP Solution Manager with 12 Test Plans. The Test Plans have different number of test cases. I do not have the Test cases now, but I shall have them in future. I currently have the following data.
    Test Plan ID
    Module
    Business Process
    Business Area
    Sub Business Area
    Test Case Description
    Test Case Details
    Transaction Codes
    Priority of Test Cases
    Can I create a structure of a project in the development system in which I have 12 Test Plans and n number of Test Cases under every Test Plan? The structure would have place holder for each test case in which I can upload the Test Cases later. Is that possible?
    Regards,
    Namrata.

    Hi Namrata,
    Yes, you can create project structure before using solar01 tcode. later once your test cases (either manual or automatic) are ready then you can upload them using solar02 on test cases tab,
    refer Link Test Case to Transactions/Reports - Configuration - SAP Library
    Assignments - SAP Solution Manager - SAP Library
    Thanks
    Jansi

  • License check error in sap solution manager

    Hi  All
    I m planing to configure sap solution manager.bt when i ltried to login to sap solution mager with user other than sap* it gives license check error.and whrn i checked in solution with tcode slicense its showing red  and validity date is upto 2007.and in command prompt when i checked with command saplicense - show it shows license expired.plzz suggest me what to do now.
    Edited by: pranav kumar on Sep 7, 2009 2:19 PM

    >>The license is expired.should i reinstall the license or update the license.plz do the needful
    This is a forum. We can only suggest you but this doesnot sounds good "plz do the needful"
    You need to install a new license. Go to Service marketplace and apply a new license for your system and when you will receive a new license as a text file, then install the license via SLICENSE
    Regards,
    Subhash

Maybe you are looking for