Configuration settings for Contract account create\change\display transacti

Hello all,
Does any one know IMG path for settings for contract account related activities (Tcode - caa1\caa2\caa3). We have 2 systems of SAP ISU. One system shows various fields blocks under 'General data' tab like 'Account management data', 'contract account remarks', 'invoicing', 'associated work activity' while other system only shows 'Account management data' and 'associated work activity' that too with very less no of fields in there.
Is it because of any functional settings through IMG or is there any other reason?
Regards,
Abhi

Hi ,
In IMG there is a setting where in you can make settings for the fields of activities like contract account create , change , display .
Following is the navigation for the same .
SPRO - Financial accounting ( new ) - Contract accounts receivable and payable - basic functions - contract accounts - field modifications - configure field attributes per activity .
Here you can make the necessay settings for your activities as to you want to make the field as hide , display , mandatory etc.
Secondly , in case of authorizations - System checks for following Auhtorization objects ;
F_KKVK_BUK - For co code .
F_KKVK_VKT - Contract account type .
F_KKVK_BEG - Aurhoization group in contract account .
E_REGIOGRP - Regional structure group .
do revert back in case of anyother issues .
Regards ,
Dewang T.

Similar Messages

When I open TB, under "Accounts", it only shows the option "Create a new account". Option: "View settings for this account" is NOT shown.

When I open TB, I no longer see any information about the TB account I've used for years. Instead, the main menu shows only "Accounts" -- "Create a new account - Email, Chat, Newsgroups, Feeds". Option: "View settings for this account" is NOT shown.
Also the main menu does NOT show "Email - Read messages, Write a New Message" or "Advanced features", etc..
The actual emails pertaining to the TB account I've used for years are still present under the "Users --> xxxxyyyy --> AppData --> Roaming --> Thunderbird' folder.

http://kb.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared

REST API: Create Deployment throwing error BadRequest (The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.)

Hi All,
We are trying to access the Create Deployment method stated below
http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
fine.
Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
part.
byte[] bytes =
new byte[fupldConfig.PostedFile.ContentLength + 1];
            fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
string base64ConfigurationFile = a.ToBase64();
X509Certificate2 certificate =
CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
HostedService.CreateNewDeployment(certificate,
ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
"2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
"AzureEcoystemDeployment",
"http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
"AzureEcoystemDeployment", base64ConfigurationFile,
true, false);
<summary>
/// </summary>
/// <param name="certificate"></param>
/// <param name="subscriptionId"></param>
/// <param name="version"></param>
/// <param name="serviceName"></param>
/// <param name="deploymentSlot"></param>
/// <param name="name"></param>
/// <param name="packageUrl"></param>
/// <param name="label"></param>
/// <param name="base64Configuration"></param>
/// <param name="startDeployment"></param>
/// <param name="treatWarningsAsError"></param>
public static
void CreateNewDeployment(X509Certificate2 certificate,
string subscriptionId,
string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
string name, string packageUrl,
string label, string base64Configuration,
bool startDeployment, bool treatWarningsAsError)
Uri uri = new
Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
XNamespace wa = Constants.xmlNamespace;
XDocument requestBody =
new XDocument();
String base64ConfigurationFile = base64Configuration;
String base64Label = label.ToBase64();
XElement xName = new
XElement(wa + "Name", name);
XElement xPackageUrl =
new XElement(wa +
"PackageUrl", packageUrl);
XElement xLabel = new
XElement(wa + "Label", base64Label);
XElement xConfiguration =
new XElement(wa +
"Configuration", base64ConfigurationFile);
XElement xStartDeployment =
new XElement(wa +
"StartDeployment", startDeployment.ToString().ToLower());
XElement xTreatWarningsAsError =
new XElement(wa +
"TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
XElement createDeployment =
new XElement(wa +
"CreateDeployment");
            createDeployment.Add(xName);
            createDeployment.Add(xPackageUrl);
            createDeployment.Add(xLabel);
            createDeployment.Add(xConfiguration);
            createDeployment.Add(xStartDeployment);
            createDeployment.Add(xTreatWarningsAsError);
            requestBody.Add(createDeployment);
            requestBody.Declaration =
new XDeclaration("1.0",
"UTF-8", "no");
XDocument responseBody;
RestApiUtility.InvokeRequest(
                uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
HttpStatusCode.Accepted, requestBody, certificate, version,
out responseBody);
<summary>
/// A helper function to invoke a Service Management REST API operation.
/// Throws an ApplicationException on unexpected status code results.
/// </summary>
/// <param name="uri">The URI of the operation to invoke using a web request.</param>
/// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
/// <param name="expectedCode">The expected status code.</param>
/// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
/// <param name="responseBody">The XML body returned by the request, if any.</param>
/// <returns>The requestId returned by the operation.</returns>
public static
string InvokeRequest(
Uri uri,
string method,
HttpStatusCode expectedCode,
XDocument requestBody,
X509Certificate2 certificate,
string version,
out XDocument responseBody)
            responseBody =
null;
string requestId = String.Empty;
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
            request.Method = method;
            request.Headers.Add("x-ms-Version", version);
            request.ClientCertificates.Add(certificate);
            request.ContentType =
"application/xml";
if (requestBody != null)
using (Stream requestStream = request.GetRequestStream())
using (StreamWriter streamWriter =
new StreamWriter(
                        requestStream, System.Text.UTF8Encoding.UTF8))
                        requestBody.Save(streamWriter,
SaveOptions.DisableFormatting);
HttpWebResponse response;
HttpStatusCode statusCode =
HttpStatusCode.Unused;
try
response = (HttpWebResponse)request.GetResponse();
catch (WebException ex)
// GetResponse throws a WebException for 4XX and 5XX status codes
                response = (HttpWebResponse)ex.Response;
try
                statusCode = response.StatusCode;
if (response.ContentLength > 0)
using (XmlReader reader =
XmlReader.Create(response.GetResponseStream()))
                        responseBody =
XDocument.Load(reader);
if (response.Headers !=
null)
                    requestId = response.Headers["x-ms-request-id"];
finally
                response.Close();
if (!statusCode.Equals(expectedCode))
throw new
ApplicationException(string.Format(
"Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
                    uri.ToString(),
Environment.NewLine,
                    (int)statusCode,
                    statusCode,
                    responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
return requestId;
But every time we are getting the below error from the line
response = (HttpWebResponse)request.GetResponse();
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>BadRequest</Code>
<Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
</Error>
Any help is appreciated.
Thanks,
Shubhendu

Please find the request XML I have found it in debug mode
<CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
<Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
<PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
<Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
<Configuration>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</Configuration>
<StartDeployment>true</StartDeployment>
<TreatWarningsAsError>false</TreatWarningsAsError>
</CreateDeployment>
Shubhendu G

Change the Layout for Create Change Display and   Alv List

Hi All,
I am working on Custom Development WD Application for Maintain   Employee.
I need to Get help/advice to hadle the two Problems.
1) In my application I have to provide Create,Change & display Employee.
Customer needs seperate Link/Application for all Create , Change and Display in Portal.
I thought I am planning to Create Three Application in the WD Component(Create,Change & Display) while Pressing the Application I have to find out what is the Application They Pressed in the Componenet Controller to Change the Layout/Field (Edit/Display/Visisble) according to Create/Change/Display Employee.
For this How to Find the Application name of the WD Componenet.
2) To show the Employee List I am having using ALV LIst.
But my List consuists of 35 Fields. Customer not ready for scrolling the List to see all columns.
I thought I am planning to provide Visible/Invisble columns after providing one button.
If they pressed this button It will next set of Columns with out scrollibng.
How to handle this ?
Kindly help/advise me for both the Problems to proceed further.
Thanks in advance.
Dav

1.For this How to Find the Application name of the WD Componenet.
DATA:
l_api                           type ref to if_wd_component,
l_application_api               type ref to if_wd_application,
l_application_info              type ref to if_wd_rr_application,
lv_name                            type string.
l_api              = wd_this->wd_get_api( ).
l_application_api = l_api->get_application( ).
l_application_info = l_application_api->get_application_info( ).
lv_name = l_application_info->get_name( ).
> 2) To show the Employee List I am having using ALV LIst.
>
> But my List consuists of 35 Fields. Customer not ready for scrolling the List to see all columns.
Are they planning to buy Wide Screen monitor ??
I am not really fan of the solution you propose, at the same time i am not having better idea. I would get the customer on table and see how they would like to have the presentation of 35 columns without scrolling.
ALV provides customization, in that way users can select their own list of columns.

How do I get rid of the pop-up on my ipad2 that wants me to login to iCloud for an account i changed to a new userid?

How do I get rid of the pop-up on my ipad2 that wants me to login to iCloud for an account i changed to a new userid?
It is an iPad 2, 64GB, with wifi and 3G, running the latest iOS 8.1.2, with 43.7 GB available. I am not using the cloud. Everything I need is backed up, so loss of the information on this device is not critical.
About 2 years ago I canceled this account and created a new one when I abandoned my road runner email and change to gmail. Tech support talked me through the transition then and it is fine on all my devices (iPhone, Mac-mini, Macbook Air) except the iPad 2, which i use the most. The same thing happened to my mothers iPad 3 a few months ago, with the same repeating pop-up after changing email/appleid accounts), Apple support helped me restore hers, but mine is no longer a covered device.
This issue started about a year ago, I can cancel the pop-up but it continues to returns, it went away for a few months, then somewhere in the last few months it started happening daily, now it cycles through about every 5 - 15 seconds. Can't do anything, I have reset the iPad 2 all that did was delete my existing settings, it will not accept the old password all I can do is cancel it (until it returns again).
Need the directions to delete the old appleid and accept the new applied on this device.

Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support

How do I get the configuration settings for GPRS mms ect for EE

Hiya :)
My son-in-law got a new iphone4s as an upgrade from EE/orange on Tuesday 18th feb 2014
It was an upgrade for his sim only contract changed to a phone and sim
The first phone he had was a samsung galaxy s3 mini but he couldn't get used to it as had used his old iphone4 for over 4 years before it died
The samsung galaxy s3 mini was sent back and a nice shiny iphone4s was sent out instead and he got it on the date up top
The sim that came with the iPhone keeps saying invalid for some reason?
But the sim he got with the sg3 mini works but has no configuration settings for the iphone4s in it only for the sg3 mini
We have tried online looking for the settings for wap/GPRS/mms/edge ect to send via SMS but can't seem to find anywhere that works?
Can anybody help please?
His partner (my daughter) is expecting there 2nd baby and he wants these set up ASAP
He can recieve calls and make calls and do the same with SMS but no Internet/mms ect

Check out FEBE. <br />
https://addons.mozilla.org/en-US/firefox/addon/2109/

Configuration Settings for Postal Adress Validation and Duplicate Check

Hi,
What are The Configuration settings for Postal adress validation and Duplicate Check for Accounts(BP'S) in CRM 7.0 version
Can some one send me the configuration settings for Postal Adress validation and Duplicate Check
Thanks & Regards
Kishor Kumar

Hi kishore kumar,
For the Postal code Validation you need to install and configure the following
Outside of your SAP system:
1. Install Data Services and the Address Directories.
2. Install Data Services Component.
3. Install the RFC Server.
On your SAP system:
4. Install the BAdIs from the previous version of this product.
5. Install the BAdIs support package from this version.
6. Run the post-installation tasks required of a new installation of the BAdIs.
7. Activate the IC WebClient, if desired.
Thanks
Jayakrishnan Nair

Configurational settings for data source in BI server

Hi Sdns,
Where can we make configurational settings for data source in BI server.
Advance thanks to replies.
karun

Go to T-code RSA13.
Search you desired BI system.
Right click on it and Display Data Source Tree.
There you can see all your datasource with BI as source system.
You can do the same for other source systems.
Double click on the datasource to see the fields and configuration.

ChangeConfigurationByName fails with "The specified configuration settings for Settings are invalid."

Hello,
I am tryint to update deployment and always have following error
"The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers."
Have found similar
thread and
stack overflow - without any success. I am not chaning anyting. Just reading deployment configuration and tryint to update with the same settings. I use .net azure sdk wrappers to generate requests. Code looks like:
var deployment = client.Deployments.GetByName(location.DataCenter, location.Cluster);var result = client.Deployments.ChangeConfigurationByName(location.DataCenter, location.Cluster, new DeploymentChangeConfigurationParameters{ Configuration = deployment.Configuration});
Catched request response from fiddler:
POST https://management.core.windows.net/[subscription-id]/services/hostedservices/[service-name]/deployments/[deployment-name]/?comp=config HTTP/1.1
x-ms-version: 2013-11-01
User-Agent: Microsoft.WindowsAzure.Management.Compute.ComputeManagementClient/0.9.0.0
client-tracking-id: 2
Content-Type: application/xml
Host: management.core.windows.net
Content-Length: 544
Expect: 100-continue
Connection: Keep-Alive
<ChangeConfiguration xmlns="http://schemas.microsoft.com/windowsazure">
<Configuration>PFNlcnZpY2VDb25maWd1cmF0aW9uIHhtbG5zOnhzZD0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEiIHhtbG5zOnhzaT0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEtaW5zdGFuY2UiIHhtbG5zPSJodHRwOi8vc2NoZW1hcy5taWNyb3NvZnQuY29tL1NlcnZpY2VIb3N0aW5nLzIwMDgvMTAvU2VydmljZUNvbmZpZ3VyYXRpb24iPiAgPFJvbGUgbmFtZT0ieWF1aGVuLWNjaXMyIj4gICAgPEluc3RhbmNlcyBjb3VudD0iMSIgLz4gIDwvUm9sZT48L1NlcnZpY2VDb25maWd1cmF0aW9uPg==</Configuration>
<ExtendedProperties />
</ChangeConfiguration>
Response
HTTP/1.1 400 Bad Request
Cache-Control: no-cache
Content-Length: 351
Content-Type: application/xml; charset=utf-8
Server: 1.0.6198.51 (rd_rdfe_stable.140226-1543) Microsoft-HTTPAPI/2.0
x-ms-servedbyregion: ussouth
x-ms-request-id: dcb1c5aedb5872d4aaf90acfede2de0b
Date: Tue, 04 Mar 2014 13:38:10 GMT
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><Code>BadRequest</Code><Message>The specified configuration settings for Settings are invalid. Verify
that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message></Error>
the same data returned by operation status. Decoded base-64 encoded string looks like
<ServiceConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration">
<Role name="yauhen-ccis2">
<Instances count="1" />
</Role>
</ServiceConfiguration>
Have tried without new line symbols, without xmlns, updating by production. without any success

Hi,
The configuration file is a file with extension .cscfg. If you have Visual Studio, the file is automatically generated when you create the project, and automatically updated when you modify the project's properties.
>> Not sure were could I get content of this file from api?
It's needed to encode this file's content use base64, and put the result in the body of your request. (Please refer to
http://msdn.microsoft.com/en-us/library/windowsazure/ee758710.aspx for more information.)
>> <ChangeConfiguration xmlns="http://schemas.microsoft.com/windowsazure">
<Configuration>PFNlcnZpY2VDb25maWd1cmF0aW9uIHhtbG5zOnhzZD0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEiIHhtbG5zOnhzaT0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEtaW5zdGFuY2UiIHhtbG5zPSJodHRwOi8vc2NoZW1hcy5taWNyb3NvZnQuY29tL1NlcnZpY2VIb3N0aW5nLzIwMDgvMTAvU2VydmljZUNvbmZpZ3VyYXRpb24iPiAgPFJvbGUgbmFtZT0ieWF1aGVuLWNjaXMyIj4gICAgPEluc3RhbmNlcyBjb3VudD0iMSIgLz4gIDwvUm9sZT48L1NlcnZpY2VDb25maWd1cmF0aW9uPg==</Configuration>
However, may I know how you find the body for your request? (It seems you do a base64 decoding, you find it is a valid configuration file, but it doesn't have any configuration settings.) Actually, the settings defined in csdef needed to
be contained in the configuration file.
Best Regards,
Ming Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Tables for contract account receivables & payables

Dear Members
I would like to know tables for contract account receivables & payables.
1)header
2) line items.
when we run report by t-code FPL9 we get information line itemwise. this information coming from which table.?
Kindly inform me tables & not strcutures.
regards
Satish

Hi
Please check table DFKKKO and DFKKOP
Award points if found useful.
Regards,
K Lakshmanan

Set up Company Codes for Contract Accounts Receivable and Payable

HI,
I need clarification on "Set up Company Codes for Contract Accounts Receivable and Payable"
When a company code "ABCD" isn't set up for contract accounts receivable and payable (Menu path:
SAP Insurance -> Collections/Disbursements -> Organizational Units -> Set up Company Codes for Contract Accounts Receivable and Payable), are postings on this company code "ABCD" within FS-CD not allowed and blocked ?
Is it mandetory to specify company codes to post in Contract Accounts Receivable and Payable in SAP FS-CD.

Yes . It is mandatory to extend company code chart of accounts to CA/CR and FSCD.
Srinivas

API for Task list create/change

Hi,
Is there any API for task list create/change (Transaction IA05/06)?
Thanks
Sanket Sethi

That would be very useful to know for me too. So has anybody an idea?
Greetings Philip

Configuration Settings for Web Dynpro

Please tell me ICM and ICF configuration settings for Web Dynpro programs.
Can anybody tell me what is pre requirment for Web Dynpro.

hi Shweta ,
pls refer the SAP online help :
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/fa/a5554a1de4964e8459851782eddda3/frameset.htm
regards,
amit

BAdi for Merchandise Category Create/Change (WG21/22)

Dear All,
Required BAdi for Merchandise Category Create/Change (WG21/22).
Plz. suggest.
Regards,
Dharmesh

Check this exit.
WRF_PRGRP_T023_SCR_I
Also check
SAPMWWG2            User exits for reclassification
You can use this program for finding exits..
REPORT ZFINDUSEREXITS NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
                   AND OBJECT = 'PROG'
                   AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
      SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
      SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
      TFDIR-FUNCNAME.
      SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
                         AND OBJECT = 'FUGR'
                         AND OBJ_NAME EQ ENLFDIR-AREA.
      MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
                WHERE PGMID = 'R3TR'
                  AND OBJECT = 'SMOD'
                  AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
                                   TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
       20(20) P_TCODE,
       45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
    WRITE:/(95) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
           2 'Exit Name',
          21 SY-VLINE ,
          22 'Description',
          95 SY-VLINE.
    WRITE:/(95) SY-ULINE.
    LOOP AT JTAB.
      SELECT SINGLE * FROM MODSAPT
             WHERE SPRSL = SY-LANGU AND
                    NAME = JTAB-OBJ_NAME.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/1 SY-VLINE,
             2 JTAB-OBJ_NAME HOTSPOT ON,
            21 SY-VLINE ,
            22 MODSAPT-MODTEXT,
            95 SY-VLINE.
    ENDLOOP.
    WRITE:/(95) SY-ULINE.
    DESCRIBE TABLE JTAB.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST   SCREEN.
Edited by: Sai Kumar Potluri on Mar 24, 2009 11:31 AM

Please tell me configuration settings for Availability check

HI gurus,
Please telllme configuration settings for Availability check
regards
DVSK

Please read the "Rules and Regulations" of the forum b4 posting any question. This topic was discussed in this forum quite frequently and had you taken efforts to search, you would have got it.
Please check this thread
[can any body explain the configuration settings of AVAILABILITY CHECK|can any body explain the configuration settings of AVAILABILITY CHECK with.]
thanks
G. Lakshmipathi

Configuration settings for Contract account create\change\display transacti

Similar Messages

Maybe you are looking for