Configuration Settings - HR_SGPPP (Smartform) & RPUPBSR8_PRINT (Print Form)

Hello Experts,
Can anyone please let me know where HR_SGPPP smartform and print form is configured(Transaction code and steps to configure the smartform and print program ).
Kindly do the needul help.
Thanks & Regards,
Lakshmi Prasad

Hello Experts,
Details :
For the pensionable employees, the form 'Option for Retirement Benefit' needs to be printed along with pension paper.
The standard pension paper print program u201CRPUPBSR8_PRINTu201D calls the smatform u201CHR_SGPPPu201D from the routine u201CPRINT_PPu201D.
Thanks & Regards,
Lakshmi Prasad

Similar Messages

Installing and Configuring Adobe Document Services For Print Forms

Hi,
I want to use Adobe Document Services,for Print Forms Scenario,on ABAP side.
I installed the Adobe document Services following the steps in the Installation Guide.I obtained the Credentials file and supplied it during installation.
Then i followed the steps in the configuration Guide,except for the SSL connection part, as i have chosen Basic Authentication .
The Web Service is running and on opening the home page,when i test the method rpData,it asks for Username and password,when i supply my username password it says, user does not have rights to method rpData.
I even tried using J2ee Admin rights,user with SAP_ALL rights, and ADS_AGENT.
When i test the service from ABAP side,using the RFC destination i created on Client 400,from where i want to use it, the test shows status code OK.
When i test a form through transaction SFP,it asks for USERNAME and password,which i tried as my USERID,ADMIN ID with SAP_ALL rights, even with the users i created during Configuration like ADS_AGENT, ADSUser etc.
Our J2ee Engine is installed on Client 200,i installed the ADS on Client 200 and created the users ADS_AGENt(service user with role SAP_BC_FP_ICF) and ADSuser on Client 200.
I also activated the ICF services and created the destination for the destination service using Visual Administrator.
My Issues:
1)To test the Webservice,what USER ID password needs to be supplied?Do i need some Special role or rights?
2)During Configuration ,when i create a USer in SAP Web AS ABAP for Basic Authetication,after creating ADSCallers Role and assigning to ADSUSer ,in Visual Administrator,after selecting com.adobe/AdobeDocumentServices*AdobeDocumentServicesAssembly.jar ,under ADSCallers,i ama ble to see the both the users ADSUser(user in j2ee Engine for basic authentication ), and ADSUSER (user type system in ABAP),are visible,
When try to add ADSUSEr by choosing ADD,from USER Tree , it doesn't do so.So i Added the ADScallers group instead,thus indirectly both users added.Can this be a Problem?
3)What else do i need to do?Am i missing something?
Please help.
Regards,
Siddhartha

Hi all,
I am having an issue in which my ecc could not use properly the ADS on the EP.
I could properly execute FP_PDF_TEST_00 from se38 transaction which gives the correct version no of ADS. Also I am able to get the correct version no by giving username and password at http://<J2EE_host>:<J2EE_port>/AdobeDocumentServices/Config which seems like the ADS is working properly in EP.
However when the abaper is trying to run his form using spf like ZFORM_VENDOR it is showing error like
" Error during activation Message no. EU837 "
Can you please shed some light on what all steps I need to check to ensure that ADS is working properly ?

Printing Forms 153 Building Block Configuration Guide

Hello,
we are trying to activate SAP Best Practices Smartforms using the doc Printing Forms 153 configuration guide.
when we copy this object /PCCFR/FR_SDINQ to YBFR_SDINQ it gives this error :
"Form or text /PCCFR/FR_SDINQ does not exist"
Please help.
Arnaud

Hi Fabrício:
Open this URL: http://help.sap.com/bp_bw370/html/index.htm
Click "Preconfigured Scenarios" link
Click on the Links to navigate on the different available scenarios and to see the documents you can download (Scenario Documentation, Scenario Installation Guide and Building Blocks)
*Financials
-- Financial Accounting Analysis
-- Controlling Analysis
-- CO-PA Analysis
-- Cost Center Planning
-- Reporting Financials EhP3
*Customer Relationship Management
-- Sales Analysis
-- Cross-Functional Analysis: Financial and Sales Data
-- Booking Billing Backlog Analysis
-- Sales Planning
-- Scheduling Agreements Analysis
-- CRM Analytics
*Supply Chain Management
-- Purchasing Analysis
-- Manufacturing Analysis
-- Inventory Analysis
-- Demand Planning Analysis
-- Resource and Operation Data Analysis
*Product Lifecycle Management
-- Project System - Controlling and Dates
*Human Capital Management
-- Cross-Application Time Sheet
-- Time Management - Time and Labor
-- Personnel Development - Qualifications
-- Travel Management - Travel Expenses
*General
-- Data Mining - ABC Classification
Best regards,
Francisco Milán.
Edited by: Francisco Milan on Apr 28, 2010 11:30 AM
Edited by: Francisco Milan on Apr 28, 2010 12:04 PM

What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

You want to allow someone to open your document and fill out the form (in the fields you have created), but not change or edit the form, right? Here's the answer - assuming you are using Acrobat Pro and someone will be opening the PDF using at least Acrobat Reader 9 and up:
Tools > Protection > Encrypt < Encrypt with Password
Answer YES to change the security.
A new window opens:
 Do NOT select Document Open (or that will require a password to open the document.)
 Select: Permissions (Check the box next to "Restrict editing and printing of the document.")
 Change the following 2 settings from the drop-down box:
 Printing Allowed: Select High Resolution
 Changes Allowed: Select Commenting, filling in form fields, and signing signature fields
 Leave selected: "Enable text access for screen reader devices for the visually impaired"
 Change Permissions Password (insert a strong password)
 Leave all other settings alone in "Options"
 OK - OK
 Re-enter the Permissions Password (the one you entered above)
 OK - OK
 Save the PDF to apply the security [notice that (SECURED0 will appear after the document title]

Printing Form Header Text in Smartforms

Hi,
I have created smartform for SD module.I am printing Form header text in a window by using loop.I am getting the text with the help of READ_TEXT function module.It comes as we type in Form header.But the problem is if they type more than 15 lines it is not printing.I want to print the rest of the lines in next page.How to do this?

Hi,
In smartforms, only the main window is a dynamically varying one.
So give your include text concept in the main window..
so that if your text increases more than a page, it will be printed in the next line..
You can maintain your text in so10 transaction.. with text id and text name..
using include text u can simply give the Id and text name in forms, you will get the enetered text.
regards,
vijay.R

Steps involved to Configure a Smartform for printing TO Item

Hi,
I want to develop a Smartform to print TO for each Item.
Currently it is being done using SAP Script.
I checked the Configuration in OMLV and assigned my print program Z****** .
This thing here is I don't see any values passed to my program like TO Number, Whse Number etc when called through LT31.
Where as I assign the standard program RLVSDR40 and debug it all the details are being passed to this program.
I am not sure if I am missing any configuration.
Please help me to figure out the issue and let me know all the steps involved in configuring the Smartforms to print Transfer Orders.
Thanks in Advance.
MK.

Hi Murali,
The SAP delivers the solution to print the TO item by SAPScript, but we can do it by Smartform as well, as in
You need to create a project for the enhancement MWMD0001, because EXIT_RLVSDR40_001 will fulfill your purpose of doing it the other ways i.e. via Smart from.
For this you have to use CMOD transaction to create the project for the above said enhancement.
Note: If you do this way any configuration done via OMNU wont't be considered.
Then after in teh import parameters you have a table XRLDRI, which contains both the warehouse number and the transfer order number, the same can be passed on to the designed Smartform to fulfill your purpose.
Sample Code, you can refer to:
*local variable declaration.
 DATA: l_wa_fm_name TYPE rs38l_fnam.
* Local Field Symbols
 FIELD-SYMBOLS : <l_fs_rldri> TYPE rldri.
* Local Constant declaration
 CONSTANTS : lc_fmname TYPE tdsfname VALUE 'XYXYXYXY', "Smartform name, here designated by 'XYXYXYXY'
 lc_chk TYPE rldrudruck VALUE 'X'.
*Moving Transfer Order Print :Item level data into corresponding work area.
 LOOP AT xrldri ASSIGNING <l_fs_rldri>.
* Determine smartform function module
 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 formname = lc_fmname
 IMPORTING
 fm_name = l_wa_fm_name
 EXCEPTIONS
 no_form = 1
 no_function_module = 2
 OTHERS = 3.
 IF sy-subrc = 0.
* Call the function module of the smartform
 CALL FUNCTION l_wa_fm_name
 EXPORTING
 user_settings = lc_chk
 tanum = <l_fs_rldri>-tanum
 lgnum = <l_fs_rldri>-lgnum
 EXCEPTIONS
 formatting_error = 1
 internal_error = 2
 send_error = 3
 user_canceled = 4
 OTHERS = 5.
 IF sy-subrc = 0.
 ENDIF.
 ENDIF.
 ENDLOOP."LOOP AT xrldri ASSIGNING <l_fs_rldri>.
Please validate the same at your end and let me know in case you require any further inputs from my end.
BR/Thanks
Pranav Agrawal

FBZ5 print form for payment document , where is configuration for form ?

Hello everyone.
in transaction code FBZ5 print form for payment document.
which transaction code that used for configuration form for print in FBZ5.
plese help.

Hi,
Forms developed by ABAPer, discuss with Technical people.
as a functional we can use form for check printing based on our comp requirement.
FBZP (Payment method per comp code) we are assign form, that same form we are using for FBZ5 also.
Creation Form T.Code: SE71
Regards
Viswa

SRM 7.0 - customizing for print forms

Hi gurus,
we want to use adobe forms for print forms.
In customizing we are able to switch from smartforms to adobe forms (sap note 1264423).
While we are encountering problem in configuring differents output actions for certain documents: i.e. print different forms on basis of a value of an attribute that belong to the business object. We follow IMG documentation (in T. SPRO: SAP Supplier relationship Management -> SRM Server -> Cross Application basic settings -> Set output Actions and output Format -> Condition-Dependent Document Output) but conditions-dependent forms are not getting printed.
Please help me solving this issue.
Luca

Any help on this?

Pre-printed forms on IBM 5577 dot printer

Dear all,
I was wondering if there is any SAP tool in order to use pre-printed forms (with specific layout) on IBM 5577 dot printer which would allow to speciy a pre-defined layout.
Or do I have to define for each field the position on the pre-printed form thanks to SAPscript editor?
Regards.

HI Cany,
There is no such tool to identify the problem .In scripts and smartforms we have to define the layout pertaining to printer and its configuration settings.once the layout is defined and the printer is defined during the printing the printing begins automatically.in ur case u r talking about pre printed forms like application forms like cases, for this we have to know the length of the form initially and take care to identify the length of the field and also position.Hope u understand this.

How to use Smartform to print check as payment method?

Actually I'm using Sapscript to print checks as payment method.
The configuration is at OBVS transaction, but at detail of payment method in "form data" option I can only choice Sapscripts.
How can I to migrate Sapscript existing to new Smartform to print check as payment method?

Hi,
Please check this path :
Financial Accounting (New) > A/R A/P > Business Transactions > Outgoing Payments > Automatic Outgoing Payments >
Payment Media > Make settings for classic payment medium programs.
Here you assign your smart form and the relative program.
Regards,
Sadashivan

Performance Problem with Adobe Print Forms (Non-Interactive)

Hi Team,
I have a Web Dynpro ABAP application with a print button which actually launces an Adibe print form (NOT Interactive) for the WDA data context. The scenario is for a Purchase Order in the ERP system. The problem is regarding performance when the line items are more then 150. The Adobe form is very simple WITH NO scripting and a plain tabular display of the line items. It takes around 4 minutes to load the form which has only 5 pages and is causing the WDA application to time out. Following are the configuration/Design details:
ADS Version: 705.20060620101936.310918
Adobe Reader 7.0, Version 7.0.9
Adobe Live Cycle Designer 7.1, Version 7.1.3284.1.338866
FORM Element in WDA:
displayType = activeX (Should this be native for performance improvements?)
"enabled" is not checked
readOnly = 'X'
SFP Settings for the template Form
Layout Type in Properties = Standard Layout (Should this be xACF or ZCI for performance improvements?
Interface type for the Form Interface = XML Schema-Based Interface
We are on 2004s release SP10
Specific Questions:
1) Any recommendations for the above settings to improve performance?
2) The form design is very simple with no complexity. The Table element is very basic and as per the blogs given in SDN. NO Scripting is performed.
Any help, recommendations would be greatly appreciated.
Regards

Hi Sanjay,
i would suggest you to have ZCI layout (native).
Set the form properties to be cached on server (refer performance improvements in the Adobe LC Designer help).
The performance will also depend on the ADS and also the network, including the R/3, as all these components come into picture.
Hope these points, if you have not checked already, will help you.
- anto.

How to differentiate between printed form and form sent by Mail

Hello All,
We have a requirement where we need to print a different text in the smartform based on whether the PO is being printed or being sent by mail. There is a radio button in PO Output screen which lets you select whether to print the PO or send it by mail. Would anyone know which table holds this data?
Thanks for your time.
Regards,
Johnson

Hi
Which SRM version are you using ?
You can change smartform in transaction SMARTFORMS. Choose From BBP_PO and click on edit button. Go to Global Settings\Global definitions and go to Initialization tab.
You will find the relevant field in SF_PO structure
Based on the PO GUID, read the PO relevant data using the function module BBP_PD_PO_GETDETAIL. Hope here you can identify the table / field names as well.

Also, you can add
IF... ENDIF statements and add a flag variable
based on the current status of document. And use this flag to differntiate between the two statuses.
Related link ->
Re: SRM PO Print
SRM PO Print
Re: How to change default smartform triggered while printing for shopping cart
PO output (classic scenario)
Revised PO
Re: SRM PO SMARTFORM
delete printed PO
Trigerring Smartform
Trigering Smartform
Re: SRM PO Form
Do let me know.
Regards
- Atul

Smartform-PDF-Printer fonts

Hi Folks,
Here we have designed a Invoice-smartform and converted it into PDF which is by default storing in c-drive as mentioned in the code.When we open the Pdf it is displaying it fine but when given a printout except the logo nothing is getting printed,I mean it is showing all junk characters.May I know what is the problem and how to rectify the same.
Points will be given.
K.Kiran.

Hi Kiran, see the OSS notes: 960341 and 776507.
I downloaded and copying here, Hope this will be helpful
OSSNote:960341
Symptom
In some device types (e.g HPLJ4, HPLJ5) you experience non-uniform character spacing in the PDF document after the PDF conversion of SAPscript or Smart Forms documents, using HELVE or TIMES fonts. You want to know the reason.
Other terms
CONVERT_OTF, SAPscript, Smart Forms
Reason and Prerequisites
The problem is not due to an error in the PDF converter but due to the fact, that the printer font, underlying the device type (e.g. Univers or CG Times in PCL-5 device types), is not available for the PDF converter and is either not available in Adobe Reader. The PDF converter has to try to simulate the layout of the printer font by means of a font which is predefined in Adobe Reader. This is done by assigning the letter widths of the printer font to the font used in Adobe Reader.
The PDF file contains a table with letter widths, used by Adobe Reader in the output of text, for each used printer font (except PostScript fonts).
Example:
%Charwidth values from HP4300 HELVE 060 normal
/Widths
[ 278 333 500 633 633 1000 758 333 333 333 633...
Adobe reader converts this width table, by modifying the space between each character, so that the specified letter width (= space between the current and the next letter) is kept.
This 'Simulation' of printer fonts results in the sometimes visible irregular spaces in PDF.
The PDF converter always uses the Helvetica Adobe PostScript font for the display of HELVE and the Times Roman Adobe PostScript font for the display of TIMES. However, for these Adobe PostScript fonts, Adobe Reader often uses a Windows TrueType font, which differs slightly from the original PostScript font.
Solution
Workaround: Use the POST2 PostScript device type or the PDF1 PDF device type for the PDF conversion of documents in the Latin-1 character set. They both use the Adobe PostScript fonts Helvetica or Times Roman for the HELVE/TIMES printer fonts.
Header Data
Release Status: Released for Customer
Released on: 30.06.2006 12:44:06
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
OSS Note: 776507
Symptom
Documents printed via SAPscript or SmartForms do not print with correct special characters, e.g. ### prints instead of Japanese or Russian characters. What to do?
Other terms
SAPscript, SmartForms, printing, device types, OTF
Reason and Prerequisites
Help required to choose proper fonts in a SAPscript or SmartForm
Solution
When using SAPscript or SmartForms to print (or email or fax) a form from a business application, many factors influence the outcome of the actual text within the form. All these factors must be checked in order to ensure a correct printout:
1) The language version of the form used to produce the printout.
Example: If you want to print a French invoice, you need to have a FR version of your SAPscript or SmartForms invoice form RVINVOICE01. And the application program must specify the corresponding language key (FR) when calling the SAPscript or SmartForms API.
2) The font selections specified in the form (possibly also in a SAPscript style or SmartStyle used in a form).
Example: In a SAPscript form or a SmartStyle you need to specify HELVE if you want to print German text in Helvetica (or similar) font. If you want to print Japanese text, HELVE is not a valid choice but you need to specify a Japanese font like JPMINCHO in your Japanese form.
3) The output character set of the device type
Every printer in transaction SPAD has a "device type" assigned. Device types used by the spooler for printing support only one single specific output character set. All text from the form has to be converted (using SAP's built-in character conversion mechanism) to this output character set.
A character set can typically support either a single language (e.g. Shift-JIS which supports only Japanese) or a set of languages (e.g. ISO 8859-1, which supports Western-European languages). It is possible that a given language (such as German) can be supported by several output character sets, e.g. you may use either ISO 8895-1 (Latin-1) or ISO 8859-2 (Latin-2) to represent German text. This is so because both character sets contain the special characters used in German.
Example: HPLJ4000 is a HP LaserJet device type supporting the ISO 8859-1 (Latin-1) character set. ISO 8859-1 can be used to represent e.g. Dutch, English, French, German, Spanish, Swedish but NOT Russian or Japanese.
As a consequence, it is ok to use HPLJ4000 to print English, German French etc. but not for Japanese or Russian.
4) The set of available printer fonts for a given device type
When formatting a document, SAPscript and SmartForms perform an automatic mapping of the font definitions in the form (e.g. "HELVE 14 point bold") and the available printer fonts of the device type. A replacement printer font is chosen, should the specified font selection not be available in the device type. Now this replacement can be problematic if a language-specific font, such as Chinese CNSONG, is specified in a form and it gets replaced by a font which does not support this language, e.g. COURIER.
To solve this problem, font families in SE73 have language attribute assigned, e.g. some fonts are characterized as being suitable only for certain languages. And when a replacement has to be chosen because the original font from the form is not available in the device type, a replacement font is chosen which has the same language attributes.
If no fonts for the language in question exist in the device type, the resulting font will not be able to print the special characters and you will see "wrong" output characters in the printout.
Note on SAPscript/SmartForms Print Preview:
The OTF Print Preview available in Windows GUI (e.g. from transaction SP01) will sometimes not show the "wrong" characters which appear on the final printout. Here is the reason: since the Print Preview runs in Windows environment, it will use Windows fonts to represent the actual printer fonts. A Windows font typically has more available characters (i.e. covers more character sets) than are actually available in a printer's resident font.
A typical example where the Print Preview will differ from the printout is here: if you have a Chinese PCL5 printer such as CNHPLJ4 and use the Western Latin font COURIER in your document, the print preview will show you Chinese characters if you (by accident) tried to format Chinese characters in COURIER font. This is because Windows will automatically choose a font that can output Chinese characters (which is actually not Courier). But when you print the job on an actual PCL5 printer with resident Western and Chinese fonts, the Courier font will not print any Chinese characters but Western special characters instead, because the printer's resident Courier font does not include Chinese characters.
Rule of thumb: all Asian device types (e.g. CNHPLJ4, JPHPLJ4, JPPOST, KPHPLJ4) support not only Asian fonts but also COURIER, HELVE and TIMES fonts. But these Latin fonts can only be used to print English text, not Chinese/Japanese/Korean characters.
Which fonts are suitable for a given language?
Language(s):            Font family to use in a form:
Latin-1 (Western Europe/Americas) *******
DE,EN,FR,ES,NL,SV       COURIER, HELVE, TIMES
                        (LETGOTH, LNPRINT)
Latin-2 (Central Europe) ****************
PL, CZ                  COURIER, HELVE, TIMES
ISO 8859-4 (Baltic) *********************
ET, LT, LV              COURIER, HELVE, TIMES
ISO 8859-5 (Cyrillic) *******************
BG, RU, SR, UK          COURCYR, HELVCYR, TIMECYR
ISO 8859-7 (Greek) **********************
EL                      COUR_I7, HELV_I7, TIME_I7
ISO 8859-8 (Hebrew) *********************
HE                      COURIER, HELVE, TIMES
ISO 8859-9 (Turkish) ********************
TR                      COURIER, HELVE, TIMES
Simplified Chinese **********************
ZH                      CNHEI, CNKAI, CNSONG
Japanese ********************************
JA                      JPMINCHO, DBMINCHO, DBGOTHIC
Korean **********************************
KP                      KPBATANG, KPDODUM, KPGULIM
                        KPGUNGSE, KPSAMMUL
Traditional Chinese *********************
ZF                      TWDPHEI, TWMING, TWSONG
Thai ************************************
TH                      THANGSAN, THDRAFT, THVIJIT
Arabic (Unicode systems only) ***********
AR                      ANDALE_J
Verify your output by examining the OTF data
When analysing printing problems of this type, be sure to check the OTF data which gets produced by SAPscript or SmartForms. OTF or "Output Text Format" is the intermediate page-description format generated from SAPscript or SmartForms. OTF will contain the final printer font names and character set/language identifiers which help to solve the problem. OTF will even name the form and the language of the form used to create the output.
The easiest way to do this is to create a spool request from your application, run transaction SP01, use menu
Goto->Display Requests->Settings
and choose
Display Mode: Raw
Now display your spool request. If this is a SAPscript or SmartForms spool request, you will see OTF data. Each line represents one OTF command, every command starts with a 2-character cmd identifier and possibly some cmd parameters follow.
Here is an excerpt from a sample OTF file where we highlight the most interesting commands:
//XHPLJ8000    0700 00000000001
IN04EALEXTEST_ZEBRA
IN05%PAGE1
OPDINA4 P 144 240 1683811906000010000100001
IN06%WINDOW2
MT0024401289
CP11000000E
FCHELVE 120 00109XSF100SF101110000067E X
UL +0000000000000
SW00067
CT00000000
ST0453037Dieses SF hat Stil ALEXTEST_ZEBRA mit
The 1st line with the // (Control) command reveals the device type usedto print: HPLJ8000
//XHPLJ8000    0700 00000000001
The 2nd line (IN = Info command) shows the name and (internal 1-char)language key of the form:
IN04EALEXTEST_ZEBRA
In this case it is the English (E = EN) SmartForm ALEXTEST_ZEBRA
The OP-line (OP = Open Page) gives the page format used in the form, it is DINA4 Portrait orientation:
OPDINA4 P 144 240 1683811906000010000100001
The CP (CodePage) cmd shows the SAP system codepage used to code the text and the active language. In our case it is codepage 1100 and language E = EN = English.
CP11000000E
Finally, the FC-cmd (Font Call) lists a printer font selected within SmartForms. Please note that every SmartForm has a designated default SmartStyle under "Form Attributes->Output Options". In addition, every text node can have a SmartStyle attached (which will override the definitions from the default style for the text). In our case the resulting printer font that was selected is HELVE 12.0 pt bold-off, italic-off.
FCHELVE   120 00109XSF100SF101110000067E X
Header Data
Release Status: Released for Customer
Released on: 22.08.2005 09:57:20
Priority: Recommendations/additional info
Category: Customizing
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
BC-SRV-SSF Smart Forms
regards,
Anji

How to change company code address in Print form used

Hi.
I have maintained the company address under the gobal data in config. However when I used the print form to print out the invoice from AP (FBL1N -> correspondence -> Request), the address of the sender / company code is different.
How do I change the address from the form / invoice ? How to find out where the form pulls the data from ? I tried SE71 but couldn't trace out anytime.
Please help.
Thanks.
Angel

Check your configuration.
Please follow the following steps:
IMG ==> Financial Accounting ==> Accounts Receivables and Accounts Payables ==> Customer Accounts ==> Line Items ==> Correspondence ==> Make and Check Settings for Correspondence
Define Correspondence Types
Create Report Variants for Correspondence
Assign Programs for Correspondence Types
Define Form Names for Correspondence Print (even you assign your form to blank company code also)
If you complete these steps you will get the spool request get generated.
Please ask your ABAPer to change the company code address and logo etc. on the form.
You go to FB12 - request for the statement
then go to F.61
Then go to SP02 - Take print out.
Regards,
Ravi

Smartform preview / print of chinese characters

Hello all
I am facing this issue:
After implementing SAP Note 852926, the Smartform preview / printing works fine with Chinese characters in DEV system.
The Unit test were OK and then the SAP Note has been transported to our TEST env, but the chinese characters are not previewed and printed correctly there.
I see characters as "»ÆêÍ" instead of "黄晖"
I can not find any difference in settings / fonts of the two systems. What am I missing?
Anybody can give a hint?
Thanks
Imrich

Hello Imrich,
Do you use the same device type to print in th test system?
To print Chinese characters from SAP, there are some rules:
1. The form must have Chinese language key 'ZH' or the Chinese texts must be included as standard texts with the language key 'ZH'.
2. The correct Chinese fonts(e.g. CNHEI or CNSONG) must be used for the Chinese texts in the form.
3. The form must be processed with a device type that supports the simplified Chinese language.(eg:device type CNSAPWIN).
Another possibility if you have a Unicode system is tp print via desvice type SWINCF. Here the language of the form doesn't matter.
Regards,
Aidan

Configuration Settings - HR_SGPPP (Smartform) & RPUPBSR8_PRINT (Print Form)

Similar Messages

Maybe you are looking for