Configuration Steps for Decentralized Adapter Engine
Hi all,
What all configuration steps are required to make Adapter Engine as
Decentralized AE.
I have made required changes in SLD DataSupplier in Visual Administrator.
what more configurations have to be done? On SAP XI Server and Decentralized
Adapter Engine.
With regards
Prasad
Prasad,
After configuring SLD data supplier in Visual Admin, you need to the following
1) Configure the gateway service for the central integration server on adapter engine host.
2) Perform Initial adapter engine cache refresh
3) Trigger data transfer to SLD
4) Check the connection parameters in exchangeProfile
5) Create HTTP destination pmistore in java environment
you have to go through all these tests for decentralized adapter engine. If you have XI configuration guide, it has all these steps in detail for you to configure
--Archana
Similar Messages
-
Decentral Adapter engine or Local adapter engine requires separate databse?
I'm installing De-central/Local adapter engine in my landscape. Does it requires a separate databse??
My OS is AIX and Database is Oracle. Can someone give me the installation document for Decentral adapter engine.
Thanks
SagarThanks for the information.
I've one more question, in de-central adapter engine post installation configuration.
document says I need goto visual admin and do some settings, do I need start Visual admin in XI ?
or De-central adapter engine will have its own Visual administrator and there only we need to do this post installation steps??
-Sagar -
URL For J2SE Adapter Engine Configuration
Hi All,
I have to go for adapter configuration for that i need to go to Adapter Engine Configuration Screen. So can any one please tell me the URL for going to the particular screen.
Regards,
RahulHi rahul,
I think URL for J2SE adapter engine is http://hostname:portname. Just check following link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/frameset.htm">J2SE ADAPTER ENGINE</a>
Regards,
Keith. -
Configuring Process Integration Scenarios for Advanced Adapter Engine
Hello @all,
i've an asynchronous SOAP scenario and would like to configure an integrated configuration for Advanced Adapter Engine using a process integration scenario. In the documentation (Link below) it is described, that you can select local communication using AAE in the model configurator, but I couldn't find any hint. Any idea?
Documentation:
http://help.sap.com/saphelp_nw73/helpdata/en/48/ce987b18d3424be10000000a421937/content.htm
Thanks and kind regards
AndreasHi,
Use thse links:
Advanced Adapter Engine Configuration in PI 7.1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?QuickLink=index&overridelayout=true&47047071760975
Sreeni. -
Sender File Adapter Not Showing in Decentral Adapter Engine
Hi,
We have recently implemented a Decentral Adapter Engine on a windows box. The adapter engine seems to be working fine because my adapters show and seem to work fine in it.
However, when I define a Sender File Adapter that uses File Content Conversion message protocol instead of just File messaeg protocol, the adapter does not show up in the decentral adapter engine.
I made sure that Adapter Engine parameter in the Sender File Adapter shows the new adapter engine but that does not seem to be working. If change the Adapter Enginer parameter to show the Central Adapter Engine, then I can see the Sender File Adapter on the Central Adapter engine and it works fine. (Note: The Central Adapter Engine is installed on a Unix box)
Here are the paramters I defined for the Sender File Adapter:
- Transport Protocol: File System (NFS)
- Message Protocol: File Content Conversion
- Adapter Engine: (new Adapter Name)
Source Directory: (
server/drive/path)
File Name: purchaseOrder.txt
Quality of Service: Exactly Once
Poll Interval (secs): 60000
Poll Interval (msecs):
Retry Interval (secs):
Processing Mode: Archive
Add Time Stamp (checked)
Archive Direcotry: (
server/drive/path/archive)
Process Read-Only files: (not checked)
Processing Sequence: By Name
Fiel Type: Text
File Encoding:
Operating System Command:
Additional Files (not checked)
Content Conversion Parameters
Document Name: MT_Request_File_Data
Document Namespace: http://nxy.tots/fg_admin
Document Offset:
RecordSet Name: Purchasing
RecordSet Namespace:
RecordSet Structure: Purchase_Record,*
RecordSet Sequence: Ascending
RecordSets per Message: 1
Key Field Name:
Key Field Type: String(Case-Insensitive)
Purchase_Record.fieldFixedLengths: 8,4,2,10,10,12,18,12
Purchase_Record.fieldFixedType: char
Purchase_Record.fieldNames: Request_Action,Request_PO_Num,Request_PO_LN,Request_PO_Date,Request_Purchasing_Org,Request_Purchasing_GName,Request_Created_By,Request_Vendor_Name
Purchase_Record.fileContentFormatting: trim
Adapter Status: Active
Advanced Mode: (not checked)
Your help is much appreciated.Hi Alaa,
look into this document:
http://service.sap.com/nw-howtoguides -> Exchange Infrastructure -> Troubleshooting: Adapter Engine 3.0 (Expert Call slides)
If the File Adapter works without conversion, then you should count the number of fields in a row. If it differs from the configuration, then it runs on error.
Another idea is to check the content type of the file. When you do not enter a File Encoding, then the file adapter assumes utf-8. If the file is for example latin-1, then the number of characters in a row are not counted correctly.
Regards
Stefan -
Hello,
We have installed an XI landscape (XID, XIQ, XIP) on Unix along with a single decentralized Adapter Engine on Windows (XD1) which is currently configured for use with our XID system. We would like to also use this same decentralized Adapter Engine with our XIQ system. However, when we export a communication channel from XID that is configured to use the decentralized adapter engine (af.XID.calxid1) and subsequently import the communication channel into XIQ the decentralized Adapter
engine that was configured in XID (af.XD1.calxid1) is
replaced with "Integration Server" (Default) in the Communication Channel configuration in XIQ. The pull down to choose an adapter engine shows only the (Default) Integration server as an available choice. Currently XID and XIQ are using the same SLD and the decentralized adapter engine (af.XD1.calxid1) is identified there. I have been unable to determine how to use the decentralized adapter engine with our XIQ system. Does anyone know whether it is possible to have multiple XI systems using the same de-centralized Adapter Engine? And if it is possible how does one configure the second XI system (XIQ) to use the decentralized adapter engine?
Thanks.Hello Dan,
a decentralized AE can only be attached to a single Integration Server.
Regards,
Thilo -
Decentralized Adapter Engine working
Hi guys,
I have installed a decentralized adapter engine for my XI Server. I have a scenario which i run with default Adapter Engine(Integration Server), runs fine.
However, when i run it with choosing Decentralized AE it gives such errors in
Message Monitoring:
Exception caught by adapter framework: null
Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
Also i am testing this for two simple file2file scenarios. It's acting differently; in a scenario sender commn channel picks file, in other not.
Is there any configuration settings that's remaining? Or something else?
Regards
ArpilHi,
For the picked message, i see this in moni....
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface MI_XmlFile_out*</Trace>
<Trace level="1" type="T">select interface namespace urn:Plain2XML</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
Any clue?
Regards
Arpil -
Decentral adapter engine - No Alerts - PI 7.1
Hi Guys,
decentral adapter engine - recently installed and working fine but we are not getting any alerts.
alert rule is active by default but stilll not getting any alerts for any errors on the decentral adapter engine.
we are getting alerts properly on central adapter engine.
any ideas or suggestions would be appreciated
Thanks,
ReddyHi ,
please go through the below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0afdd69-a8a7-2d10-7e9a-cbf6fa21c5a7?QuickLink=index&overridelayout=true&49061411503734 --- STEP BY STEP
http://scn.sap.com/thread/1498569
http://wiki.scn.sap.com/wiki/pages/viewpage.action?original_fqdn=wiki.sdn.sap.com&pageId=147266890
Regards
srinivas -
Installaing decentral Adapter Engine (Java EE) 7.1 Including Enhanc
Dear All
we are installaing decentral Adapter Engine (Java EE) 7.1 Including Enhancement package 1 on Linux with database DB2.To do installation we have followed the installation guide "Adapter Engine (Java EE) 7.1 Including Enhancement Package 1 on Linux: IBM DB2 for Linux, UNIX, and WindowsTarget"
Accoridng to that document "In the Welcome screen, choose the required SAPinst installation option under the node SAP EHP1 for SAP NetWeaver Process Integration 7.1Installation >OptionsOptional Standalone Units >Partner Connectivity Kit." we have followed the same.
The installation has been completed successfully.But to do post-installation activities the java url in not comming up.
,we have tried with physical host and ip address as well.From os level we have found that server0 process is in running status.
I am not sure why the installation guide is asking us to follow Process Integration 7.1Installation >OptionsOptional Standalone Units >Partner Connectivity Kit?
Will you please let me know whether this is the correct procedure for Installation of Adapter engine on Pi 7.1 EHP1
is there any prerequisite steps are there for adapter enginee
Thanks and Regards
ravikiran.CHHello
From your description, it appears that you have installed a PCK and not a decentral Adapter Engine.
I guess you need to follow Process Integration 7.1Installation
-> Optional Standalone Units
-> Adapter Engine
You can undeploy the PCK by following the steps in the note #1295094 Initialization of PI 7.1 XITOOLS fails.
Regards
Mark -
Currently documentation only indicates the ability to create a single decentralized adapter engine. (1) Is this in addition to the existing central adapter engine or do I have to choose which one I will use? (2) Does the decentralized adapter engine have to run on its own WAS? (3) If I am planning for a high volume of messages will the decentralized adapter engine perform load balancing for my integration engine? (4) Can I have more than one decentralized adapter engine? (5) If so, how do I configure these decentralized adapter engines to communicate to my integration engine? (6) In addition, how do I control message flow from the integration engine to 1 to many decentralized adapter engines? Feedback as well as any reference to additional information is much appreciated.
Hi Kirk,
(1): in addition
(2): no, jou need to install J2SE adapter engine
(3): yes
(4): as much as you like
(5): you configure like in XI 2.0 with configuration files. That is described at the XI documentation. For messages going to decentral adapter use channel XI with specified URL, for incoming messages you don't need a channel.
(6):1 to many: Just put your receivers to receiver determination.
Regard,
Udo -
Ping error in RWB for J2SE Adapter Engine
Hi,
we have several external J2SE adapter engines and they function great other than from a monitoring perspective. In RWB "Ping Status" I'm getting the following:
HTTP request failed. Error code: "401". Error message: "Authorization Required"
Suggestions?
Cheers,
Mattias<u>This is not an answer to your question.</u>
I've tried to get an answer for: how to register J2SE adapter with Integration Server ?
I tried using SLDAccess service on J2SE adapter with no luck (with this J2SE Adapter Engine is registered in the SLD). My J2SE adapter was never available in the configuration means, in the communication channel ex: file adapter, for the adapter engine drop down all I have is Integration Server, my J2SE adapter was never listed there.
If you know an answer please post.
thanks
SKM<u></u> -
Message Archiving for the Adapter Engine
Hi,
we have configured archiving for Integration Engine (SXMB_MONI) messages on the Production XI System. is it necessary to configure Message Archiving for the Adapter Engine also ? in which scenarios archived adapter messages are useful ? are there any other advantages/disadvantages for this(in case of errored messages on the adapter engine) ? Please share any ideas.
Thanks
Pavan.>>is it necessary to configure Message Archiving for the Adapter Engine also
Not necessary,but depends upon the scenario,lets say you are posting messages to external partner's FTP and there was some issue in connectivity due to which file was not delivered,in this case you need to send the message again.
same thing can happen in inbound messages too.
>>in which scenarios archived adapter messages are useful ?
i would do this specifically for JDBC sender coz once you pick up the files based upon SQL query,you change the flag so that those values are not picked next time,in this case you can't re-run the old query and get same results.
this also holds for proxies and file too.
Thanx
Aamir -
PI Email Alert Configuration - Multiple Alert in Adapter Engine
Hi,
My SAP PI alert emails are now working. However, when I get an error in the Adapter Engine (RWB),MULTIPLE OF EMAIL ALERTS are being sent. When an error occurs in Integration Engine, only 1 email alert is sent.
For the Adapter Engine Alert Rule, i have checked the 'Suppress Multiple Alerts of This Rule' and i didn't receive any emails, but when I unchecked it, i receive multiple emails.
im using PI7.1 SP08. is there an effect because my SP is not updated?
thank you.HI Indrajit,
thanks for the response.
i have checked the 'Suppress Multiple Alerts of This Rule' but i am not receiving an alert message. The error occurred in the RWB Adapter Engine. However, if i uncheck the 'Suppress Multiple Alerts of This Rule', i am receiving multiple alert messages.
Is there an additional configuration?
thank you. -
Decentral Adapter Engine SOAP ( XI ) to ECC Proxy
Hi,
I'm facing a situation in one of our integration scenarios, where we have a Integrated Configuration ( Sender -> Decentral Adapter Engine -> Receiver ). File -> SOAP ( XI 3.0 ). On Adapter Engine I see the messages in OK status, but I didn't see them in ECC sxmb_moni...?
Could you please help me where to check, what could be a problem?
There are no issue in st22, no entries in smq2.
Many Thanks,
MilanHi Indrajit,
yes exactly I did that, compare the number of successfully messages leaving PI and entering ECC and I have different numbers. I have 6 successfull from PI, 0 in ECC...
This is the question, why? Where do I check except ST22, what kind of error occured. This happed once so far we are aware of...
Best regards,
Milan -
Soap LookupService with Decentralized Adapter Engine
Hi Experts,
I would like to use a Decentralized adapter engine with the Lookup Service on PI 7.1 , but when try to use that, it doesn't work, because Lookup Service is default configure to use Central adapter only. I would like how to set a decentralize adapter.
How to do a Soap Lookup using a Decentral adapter?
Now, I use the following:
Channel channel = LookupService.getChannel("BC_SF_***","CC**");
SystemAccessor accessor = null;
accessor = LookupService.getSystemAccessor(channel);
Thanks in advance.
Fernando Pena.You define in the communication channel, which adapter engine should be used, not in the mapping.
Maybe you are looking for
-
Firefox will not start - already tried all suggestions from troubleshooting
I searched google and here a couple times before posting this. My problem is simple, firefox just will not start. I can click on the shortcut, or the icon inside the c/program files/mozilla folder, i can click "run as administrator", i can do run/fir
-
Error Message : " No value could be determined for Customer Exit Variable "
Hello BI Experts , I have created a "ZYTD_PERIOD" Customer Exit Variable Interval Mandatory and ready for input check mark removed. The reference character is '0FISCPER' . I want to have YTD figures when the user enter single Fiscal Year Period for
-
Need to change delivery date in purchase order when it is created by ME59
Hi Gurus, Purchase orders are created using Transaction ME59 where we give the Purchase Requistion. The delivery date in the PO will be same as the delivery date of PR. According to my requirement i need to change the date of PO while the time of its
-
Imposible to change ntsc to pal resolution
For an unknown reason, my mac mini has decided that my monitor is now ntsc, and everything is terribly ugly. Fonts and colors are really bad. Only things I have done is conecting through mini display port or hdmi. display port for monitor and hdmi fo
-
Beta testers wanted - Refactoring (and more) for FB4
ElementRiver is excited to announce that our new professional add-on to Flash Builder 4 is now in beta. SourceMate adds many features to Flash Builder including refactoring, code generation, code snippets and much more. We're looking for beta testers