Configuration steps SAP NW04 - BW 3.5

Hi,
Beside the material found in the SAP NW04 installation master guides, I would like to draw an exhaustive list of the required steps to configure a brand new SAP BW 3.5 system.
Assuming that one has just finished the technical installation, what are the necessary configuration steps and tips?
Any help on that topic would be greatly appreciated and rewarded - needless to say!
Best regards,
LauQ

Hi!
sap* is mostly used for installation steps and not for system copy..
if your system is just newlyinstalled and if you have no clients in your system other then the one delivered by sap like 000 .....then you need to copy 0000 via SCCL and then start doing tasks in this new client with a user who has simmilar authorizations as sap*
so you will maintian profile parameters only after the copy...and then define logical system
<i>"actually these steps are more clearly explained in installation guide for 3.0 than in instguid for 3.5"</i>
hope it helps
with regards
ashwin
Message was edited by: Ashwin Kumar Gadi

Similar Messages

Explain withholding tax partial pament configuration steps in sap

Hi,
This ramu .explain withholding tax partial pament configuration steps in sap .

Hi,
Please follow the steps for tds-partial payments
In the following activities you make the settings for withholding tax. (SPRO-F.AC(NEW)-F.AC.GLBSETTINGS-WITHHOLDINGTAX-EXTENDED WITHOLDING TAX.
The SAP R/3 System provides you with two procedures for processing withholding tax:
"Standard" and extended withholding tax.
"Standard" withholding tax is the procedure that has always been supported by the system. It offers you the following features:
Withholding tax for accounts payable
Withholding tax calculation during payment
Withholding tax code per vendor line item
Extended withholding tax provides the following additional features:
Multiple withholding taxes per customer or vendor line item
Withholding tax calculation for partial payments
Enhancements in withholding tax calculation
Withholding tax calculation during invoice entry and during payment
Regards
Sridharshetty

SAP Netweaver 7.3 PI Configuration Steps

Hi all,
        We have installed SAP Netweaver 7.3 PI in a separate server with server configuration of ,
       Windows 2008 64-BIT Server Enterprise edition.
       MS SQL Server 2008
       SAP Netweaver 7.3 PI
       24 GB RAM & 500 GB HDD.
       I request you to provide us the configuration steps for PI 7.3.
Regards,
Gopinath M.L

Hi Gopinath,
I am not sure if I got the point, but you can perform the post installation automatically by executing templates within NWA. But of course there is also a detailled description available how to do it manually (eg in case of problems). You can find these documentation under:
http://help.sap.com/saphelp_nw73/helpdata/en/48/a9b8c87e28674be10000000a421937/content.htm
Was this what you are searching for?
best regards,
Markus

Open to Buy configuration steps in SAP IS Retail

Hi Guru's,
Let me know about open to buy configuration steps in SAP IS Retail.
Thanks in advance.
Regards,
SP

Hello All,
Delete the plant / Site complete details and put in one transport and do the import & export.
Thanks.
Edited by: krishna cherry on Jul 26, 2010 3:28 PM

SAP DBM Configuration Steps

Hey Experts
Please let me know the basic configuration steps involved in SAP DBM. I'm from SD background and new to DBM.

Hi Hussain,
for needed settings in a DBM system find details in the configuration guide for DBM 8.0 which is the newest DBM version.
In online help DBM you can find more informations as installation master guide, release strategy note and application help and the configuration guide:
SAP Dealer Business Management 8.0 – SAP Help Portal Page
Best regards
Joachim

"Step for step" configuration of SAP NetWeaver portal (2004s)

Hello,
is somewhere a plan or the proceeding - like "step for step" configuration of SAP NetWeaver portal (2004s)? I adapted now the Design of the portal. What is to be made at next - role concept, integration of transactions, or something else?
Thank you for their assistance.
Regards,
Galyna

Hi,
Refer the following links for some good documents
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1236a490-0201-0010-31a2-a08f5706d54f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/410ea290-0201-0010-748d-9738e5792a9b
http://help.sap.com/saphelp_nw04/helpdata/en/0f/163c405865e801e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0407c890-0201-0010-4684-e22d7c3da113
https://www.sdn.sap.com/irj/sdn/wiki
Regards,
Tamil K

SAP CIN configuration step - by- step material.

Dear Experts,
could you provide SAP CIN configuration step - by- step material.
thanks & regards,
vijay

Hi,
Please provide the same for me. I m also new in this.
Thanks
Kavita

Need Step-by-step configuration of SAP TR

Hello all,
Can any one please share the step-by-step configuration steps for configuring SAP-TR module... basically looking to configure the securities and derivatives. plz send to Text Removed
Thanks alot in advance.
Regards,
Satish Setty
Edited by: Lakshmipathi on Jan 26, 2012 9:17 PM
Stick to forum rules and dont ask to share SAP information to personal mail

Hello Satish,
configuration depends on the business demands of your company or customer. In a delivered system (client 000) you can find example customizing as proposed by SAP. Next to customizing steps you usually have documentation related to the step.
Customizing for Treasury Management is mostly under the tree:
Financial Supply Chain Management->Treasury and Risk Management
BR,
Tomislav

Step by step SAP EDI Configuration

Hi,
Can you please shar step by step SAP EDI Configuration deatils.
Regards,
Nitin Patil

Hi
Seeburger EDI Adapter leverages SAP XI's Adapter Framework. This Adapter is used to perform conversion between EDI and XML format. It also provides some canned EDI layouts and the ability to build your own. It is used to transfer the EDI message via HTTP or AS2 protocols.
The most direct way of using the Seeburger adapters is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to do the following:
1. define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. create a one to one mapping between input en output.
4. export the metadata in xsd or sda format for import in XI
5. generate an SDA which can be deployed in XI and used as a module.
Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
Thoughts on EDI in an SAP XI Environment
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a
regards,
Kishore

Error at DB downtime configuration step in SAP installation

Hello Gurus,
While installing CRM IDES 5.0 I am stuck at DB downtime configuration (step 9). After shutting down MSSQL server services are not automatically started. In usual case it should be. Its giving "could not start the MSSQLSERVER" service on host. And my MSSQL services are not starting either it is giving Named pipes provider, error:40 - could not open a connection to SQL Server. If any one faced similar kind of problems sugguest on this.
Regards,
Murali

Check your event log why your database is not coming up.
Markus

MaxDB configuration file - SAP System Rename

Hello,
I am new and tried to make a System Rename with SWPM.
We have maxDB.
After a few steps the setup wants you to choose a maxDB configuration file which was used for installation of the source system.
Does anyone new where I can find this configuration file?
I tried a few cfg files but nothing was correct.
These files here are not correct, I tried.
Configuration Files - SAP Documentation
Thank you so far and well greets.
Stefan

Hi Deepak,
Thanks for your suggestion but there are no existing enteries for MaxDB in the windows registry.
We are facing an issue while renaming the database. Kindly refer to SAP Note : 1427931
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…
Best Regards

Configuration steps for Extended Classic Scenario

Hi All,
Could you please let me know what are the configuration steps required for extended classic scenario.
Thanks in advance

Hi,
Important Settings that Determine the Extended Classic Scenario
The following settings are required for the extended classic scenario:
u2022 At least one backend materials management system and accounting system is connected to the SAP SRM system and defined in the configuration setting Define Backend Systems.
u2022 Product categories from the backend procurement system are replicated and used in the SAP SRM system.
u2022 The target system for each product category is the backend system in the configuration setting Define Backend Systems for Product Category. Optionally, BADI BBP_DETERMINE_LOGSYS is implemented to determine the backend system.
u2022 The extended classic scenario is activated in the configuration setting Activate Extended Classic Scenario. Alternatively, BAdI BBP_EXTLOCALPO_BADI is implemented to control the extended classic scenario based on customer defined rules.
u2022 If the backend system is an SAP R/3 version lower than 4.6B, you must define local purchasing organizations and purchasing groups.
u2022 If the backend system is an SAP R/3 version 4.6B or higher, you need to map the purchasing group used in the purchase order to the backend purchase group in one of the following ways:
u2022 Use a backend purchasing organization and purchasing group in the shopping cart and purchase order.
u2022 Use BAdI BBP_PGRP_FIND to determine a backend purchasing group in the shopping cart.
u2022 If a local (created in SAP SRM without reference to a backend system) purchasing group and purchasing organization are used, then a valid backend purchasing group is assigned to the RFC user that created the backend purchase order. This assignment is made in the backend system using user parameter EKG in Transaction code SU01.
u2022 Implement the user exit of the BAPIs BAPI_PO_CREATE1 (EXIT_SAPL2012_001 and EXIT_SAPL2012_003), and BAPI_PO_CHANGE (EXIT_SAPL2012_002 and EXIT_SAPL2012_004) to determine the purchasing group with a customer- specific logic.
This is for your additional information.
Hope this helps.
Regards,
Vikas

Give me the Configuration steps for intercompany billing and third party s

Hi Gurus,
Give me the Configuration steps for intercompany billing and third party sales and give me a brief description with examples.
Regards,
YSR

Dear YSR
Check the links
[Cross Company Configuration|http://help.sap.com/bp_bblibrary/500/Documentation/J62_BB_ConfigGuide_EN_DE.doc]
[Third Party Without Shipping Notification|http://help.sap.com/bestpractices/BBLibrary/html/J55_ThirdPartyWOSN_EN_US.htm]
Third party order processing is as follows:
Assume three companies X, Y and Z
X - The company,
y - The customer
Z - Vendor
When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
If he is procuring the goods, there are two methods that are generally followed:
Method 1)
After receiving the PO from Y, X creates a sales order against Y.
Now at the same time he also creates a PO to a vendor Z to produce the goods
Z produces the goods and supplies to X
X receives the goods from Z
Then X delivers the same goods to Y.
After that X invoices Y and Z invoices X.
Note : Here there is no direct/ Indirect relation between Z and Y.
This process is known as Trading Process. and the Material here is created with Material type HAWA.
The other method is a Third party order processing method:
Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
Now Z supplies the material to Y and acknowledges the same to X.
Z will send a copy of delivery acknowledgement and invoice to X.
After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
The next step for X is to create an invoice and submit to Y
Only after the invoice verification document is posted then only X can create an invoice for Y.
This is the business flow that is followed for third party order configuration.
There are few steps that have to be configured to enable the system to function as mentioned above.
Step1)
If you are always followwing a third party process for a material then you have to create the material using item category group BANS.
The procument type should be marked as External procurement (F) in MRP 2 view of the material master record.
if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurment ( in house manufacturing and external procurement).
Step 2)
the item category in the order should be manually changed as TAS.
For that you need to confugure the item category determination
ord type + item cat grp + usge + Hiv level = Item cat + Manual item cat
OR + NORM + + = TAN . + TAS
OR + BANS + + = TAS
Step 3)
make sure that during the item category configuration for TAS you need to mark relevnat for billing indicator as F
Step 4)
The schedule line cateogry for this type should be CS.
make sure that you mark subsequent type as NB - purchase requisition in this schedule line category as this will trigger the purchase requision order immediately after the creation of the sales order and the PO to vendor is created against this purchase requiesion.
thanks
G. Lakshmipathi

Synchronous file adapter sender side configuration in sap pi

Hi Experts
synchronous file adapter sender side configuration in sap pi
can you explain any one tell me step by step procedure?
Regards
Sagar

Hi,
You can use RequestResponseBean in the sender file adapter module .
RequestResponseBean (SAP Library - SAP Exchange Infrastructure)
Request/Response Bean for IDOC_AAE adapter
Instead of IDOC_AAE adapter you can use FILE adapter.
Regards,

Configuration Steps for Decentralized Adapter Engine

Hi all,
What all configuration steps are required to make Adapter Engine as
Decentralized AE.
I have made required changes in SLD DataSupplier in Visual Administrator.
what more configurations have to be done? On SAP XI Server and Decentralized
Adapter Engine.
With regards
Prasad

Prasad,
After configuring SLD data supplier in Visual Admin, you need to the following
1) Configure the gateway service for the central integration server on adapter engine host.
2) Perform Initial adapter engine cache refresh
3) Trigger data transfer to SLD
4) Check the connection parameters in exchangeProfile
5) Create HTTP destination pmistore in java environment
you have to go through all these tests for decentralized adapter engine. If you have XI configuration guide, it has all these steps in detail for you to configure
--Archana

Configuration steps SAP NW04 - BW 3.5

Similar Messages

Maybe you are looking for