Configuration Transactions (IMG) with Validity Dates
I have been asked to identify all of the IMG transactions that are subject to validity dates. We have recently had some configuration expire and cause processing problems.
Is there a report available to identify such IMG transactions?
Kevin
Kevin,
There are not many IMG transactions that would expire per se..
One that strikes my mind immediately is the Factory calendar which is typically set for a given number of years (5 years). the other thing is the Public holidays in the each year that varies each year/ for each organisation etc.
One another IMG that would expire is the Number range for all SAP objects (prod order, pur order, goods mov documents etc...). This will expire only when document numbers reach the end of the number range.
I am sure this will help. For more questions please feel free.
Thanks,
Ram
Similar Messages
-
ALE BOM. Updates ALL! items with validity date & change no.
Hi All,
We are having problems where ALE-BOM sent with change in validity date (with change no) to a particular item. What happens is that ALE-BOM will instead update ALL! items with the same validity date and change number.
Next,when we process ALE again for the same BOM with a different validity date(with change no), then only that
particular item is updated with validity date and change no.
Would anyone know what could be the problem that when changes are sent for the first time all items are updated?
[Version: SAP 4.6C/ SAPKH46C48]
Regards,
NeethDear:
The error itself telling you the correction. You profit center which is assigned to your cost center has a validity date less than the one you are now assigning.You can check in KE52 against the profit center assigned to your cost center master data. However the best thing is to go to KS01 and create this cost center with desired validity date.
This will resolve your issue.
Regards -
TREX - Configuring Distributed Slave with Decentralized Data Storage
I am creating a distributed TREX environment with decentralized data storage with 3 hosts. The environment is running TREX 7.10 Rev 14 on Windows 2003 x64. These are the hosts:
Server 01p: 1st Master NameServer, Master Index Server, Master Queue Server
Server 02p: 2nd Master NameServer, Slave Index Server
Server 03p: Slave NameServer, Slave Index Server (GOAL; Not there yet)
The first and second hosts are properly set up, with the first host creating the index and replicating the snapshot to the slave index server for searching. The third host is added to the landscape. When I attempt to change the role of the third host to be a slave for the Master IS and run a check on the landscape, I receive the following errors:
check...
wsaphptd03p: file error on 'wsaphptd03p:e:\usr\sap\HPT\TRX00\_test_file_wsaphptd02p_: The system cannot find the file specified'
wsaphptd02p: file error on 'wsaphptd02p:e:\usr\sap\HPT\TRX00\_test_file_wsaphptd03p_: The system cannot find the file specified'
slaves: select 'Use Central Storage' for shared slaves on central storage or change base path to non shared location
The installs were all performed in the same with, with storage on the "E:" drive using a local install on the stand-alone installation as described in the TREX71InstallMultipleHosts and TREX71INstallSingleHosts guides provided.
Does anybody know what I should try to do to resolve this issue to add the third host to my TREX distributed landscape? There really weren't any documents that gave more information besides the install documents.
Thanks for any help.A ticket was opened with SAP customer support. The response to that ticket is below:
Many thanks for the connection. We found out, that the error message is wrong. It can be ignored, if you press 'Shift' and button 'Deploy' (TREXAdmin tool -> Landscape Configuration). We will fix this error in the next Revision (Revision 25) for TREX 7.1. -
GATP - Issue with substitution rules with validity dates
Hi,
We are using GATP with RBA. Our condition table has plant as a field.
We are planning to have a substitution procedure (rules) defined at plant level.
Our rule control for product substitution list is "Start from top of list"
The issue we are facing is explained below.
The first item in the substitution procedure (rule) cannot have validity dates.
So it will always be balnk. And validity dates can be maintained for other items in the procedure (rule).
What happens in our scenario is when there is a requirement on an item in the substitution procedure (rule) which has a validity date, the first item in the procedure (which can never have validity dates) is never considerd for substituions.
If I remove the validity dates, then the first item in the procedure (rule) is considered for substitutions.
We find this strange and against our business requirement. We want the first item in the procedure (rule) to be considered for substitution ireespective of the validity date for the requested product.
It would be great if you could suggest a method to achieve this.
Thanks & regards,
Arvind.SHi Mohan,
Thanks for the response.
We are using back order processing (BOP) for allocation.
We observed that the first item was not getting considered for substitution in the BOP results and also in product view after the BOP run. No stock of that item was allocated for the order taken up in the BOP run.
However, we tried rule evaluation also. It shows the first item also, but in actual allocation the issue exists.
We are not using "start immediately" in check instructions.
Thanks & regards,
Ashok -
9320 BBM and Email not working on wifi with valid data subscrition
Hi!
Please I need your help.
My phone is a blackberry curve 9320. I have a valid data plan back home in my country that expires 7th July 2013. While abroad I intended to wifi for BBM. However, this has not been possible for though connected to wifi BBM and my email do not work. Other applications namely facebook and whatsapp work very well. I am also able to get on the internet. Please urgent help needed.I believe there is a problem at RIM at the BIS data level I have reported it to my network operator and they tell me they are dealing with Blackberry with the issue. Suggest you report it to your operator as well the more report the problem hopefully the quicked it will get fied.
-
Create Table/View with Validity Date Control?
Hi,
does anyone know the easiest way for me to create a custom view that uses validity dates to control records by time periods, similar to time constraint 1 infotypes in HR?
For instance, if I define a table to store entries like so
Client (Key): 100
PSubArea (Key): C001
Grouping (Key): 01
End Date (Key): 99991231
Begin Date: 18000101
and I want to ensure that there can only be one record active on any given date, how can I prevent someone from creating a record from 20061107 - 20071107 that overlaps the existing record?
Is there a setting I missed?
Add conditions to generated view coding? Is there a good example?
ThanksK, so I found these
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/91/ca9fb3a9d111d1a5690000e82deaaa/content.htm">SAP Help - Time-Dependent Table/View</a>
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/c1/df5c3c3b067331e10000000a114084/content.htm">Generate Time-Dependence</a>
I'll give it a whirl now. -
Force user to change cost center master data with validity date
Dear All!
we do have customer fields in table for cost centers (CSKS) and would like to force the user to do changes for these customer fields in combination with the change of the validity from/to date. I did not find any possibility to add this functionality with the customizing transaction OKEG or any other transaction. We now would need some good ideas from you as SAP experts!
Regards,Hi,
You can use COOMKS02 enhancement.
Regards,
Eli -
halo.....
i have a JFormattedTextField with MaskFormatted represent date. the maskformatted is like ("## / ## / ####") without space actually. its for dd/mm/yyyy. but when i want to save to ms access DB, it can have like day 32 or more and month 13 or more.
what i want is, can i limit the day or month so when someone input the date that out of range, it show something error-like...
thanks....you have used this line of code
try
Date dat = format.parse(you TextField.getText());
catch(Exception e)
JOptionPane.showMessageDialog(null,"Invalid Date", "Error", JOptionPane.ERROR_MESSAGE);
if you enter month above 12 or day above 31 it will not parsing -
Settling Rebate Agreements with Validity Start Date not Start of the Month
Hello Experts,
I am currently trying to settle a rebate agreement with validity dates November 20, 2011 to December 31, 2011. However, after the credit memo is created, I noticed that the Service rendered date is today's date, but I expected it to be the same as my Settlement Date = November 30, 2011 (a month-end). Please advise if this is normal. If not, please advise how to correct the automatic entry of dates.
Thanks,
MHi
Kindly let us know what is the rebate agreement type that has been used for which you are facing problem and for which rebate agreement type you are getting the month end date.Check wheather scale basis is B(Value scale) has been maintained or not for the rebate agreement for which you are getting problem.So check the differences between the two rebate agreement types.As The service rendered date of the invoice line item is used to determine the validity of a rebate condition record
Regards
Srinath -
X-distr.chain status in combination with valid from date
Hello I am using MM02 X-distr.chain status in combination with valid from date, to give materials a certain status in the sales order depending on the delivery date of the orderline.
How can I enter multiple statuses with future validation dates?
example following status with validation dates where entered in MM02 for a material
- material should have status A valid from January
- material should have status B valid form April
- material should have status C valid from July
- material should have status D valid from September
When I enter a sales order with delivery date in January system replies with status C.
When I enter a sales order with delivery date in April system replies with status C .
When I enter a sales order with delivery date in July system replies with status C .
When I enter a sales order with delivery date in September system replies with status D.
So only the current ( or previous status when current is not valid yet) is retained by the system.
How could multiple statuses be used?
Thanks in advance
JoosHello Jalo,
Thanks for your reply,
My customer sell season relevant materials so they want to control order entry and delivery creation based on predefined dates.
Status A = material is blocked for order entry and delivery creation
Status B = material is allowed for order entry, delivery creation is blocked
Status C = material is allowed for order entry and delivery creation.
Status D = material is blocked for order entry, delivery creation is allowed.
I had hoped to use standard functionality with this status field, it meets most of my customers requirements but at this moment the only alternative is to create a new table where this data can defined and create some abap logic in the user exit to set the status base on the table information.
Regards
Joos -
Read Sales Order Price with Pricing Date (PRSDT)
Hello ABAP Gurus,
I have once requirements and is, I need to extract sales order prices with a given Pricing Date (PRSDT).
Could you please tell me if these is Function Module or BAPI that I can use?
Regards,
MuraliMaintain a condition record for Rs.10/- with a validity date (only as an example) as 1st March'14 to 15th March'14. Another condition record for Rs.15/- with validity date as 16th March'14 to 31st March'14.
Now create a sale order for 500 nos. with one line item and change the pricing date as 15th March'14. Similarly, create another line item for the same material with 500 nos. and here, change the pricing date as 16th March'14 at line item level. By doing so, system would fetch the pricing in billing accordingly.
I told as per my knowledge System will bring old price only for reserved stock if you want to apply new price for reserved stock just 411 e return the stock from reservation and now create sales order
i hope this right
Your understanding is incorrect. System will never validate pricing based on age of the stocked material but based on validity period what you maintain in condition record.
G. Lakshmipathi -
Regd : How to find Validity date for a user in central user system
Hi Experts;
I want to get the list of users with profile SAP_ALL with following details like validity ,user type ,user name ,user id..
I can get through SUIM for each individual systems.Its very difficult to login to each system ,generate the report.So I prefered to go for Central system
But if I use central user system I have no option to find validity and user type for the system ( SUIM - > Cross system application )
I have also tried to the table USRO2 ( which gives only the list of users in the central system )
So is there any possible ways to find the Users with profile SAP _ALL with validity date in the central user system. So that I can easily generate it as one report instead of logging to each and every system
Regards
Sanjeev.SHi Ruchit
Thanks for your reply. I want to find the validity date of all users having SAP_ALL
profile of all child system connected through central user system .So it is possible
to do that in Centrals System by executing the report?
If I execute that report in Central user system will it give the details of all child
system connected to central system
I think it will give only the result of Central system and not the child system connected to Central system.Please clarify me.
I can execute the report by logging to each child system ,but it takes very long hours for me since there are many system in my landscape.
Awaiting for your reply.'
Thanks
Sanjeev.S -
Dear all,
I'm strugling on changing the valid-to date for a BOM component.
Let me explain in detail what the scenario is and what I've done so far.
I have a BOM header "Z" with 5 different components, Y, X, W, V and U. Validity dates should be as follows:
- Y --> 02.04.2010 to 31.12.9999
- X --> 02.04.2010 to 31.12.9999
- W --> 02.04.2010 to 31.12.9999
- V --> 02.04.2010 to 20.02.2012
- U --> 21.02.2012 to 31.12.9999
I have created a change number with validity date 21.02.2012, but when trying to change BOM components validity dates fields will be grey and won't allow me to do the necessary changes.
Could you please guide me with the necessary steps that I need to follow or where my issue would be? - I have already been checking the forum and followed some of your tips(checked config and so on, and everything seems to be ok).
Thanks a lot in advance for your help on this one as it's quite urgent to solve this so we can test it, as we need to provide with some explamples on how material variances report will be affected to client ASAP.
Kind regards,
MarioHi Mariete ,
you just need to create a change number with the valid date you want for component , example if you create a change number valid from 01.01.2010 and if you use it for changing BOM , all the changes you made will have this validity date.
its not possible to input validity dates, so all the times it will be greyed out , you can control it as discribe above.
in you case you need to create 2 change numbers , 1 with valid from date in 02.04.2010 and use it for component Y X W and V
and others with validity date 21.02.2012 and use it for component U.
another thing please keep in mind if you BOM is created in todays date or date which is greater then 02.04.2010 will be a problem , so suggestion is while creating BOM , use a change number which is valid from 02.04.2010 and cause of it all 4 components will be automitacily hace valid date 02.04.2010.
and after creating this BOM with 4 component use a second change number and add component U.
please check i hope it wil help you.
Thanks
Ritesh -
Vendor Hierarchy Validity Dates
Hi
I have a scenario where we need o create Vendor Hierarchy with past validity dates to support rebate aggrements, SAP standard will only allow you to create Vendor Hierarchy with validity date as current date.
What is the alternative approach for this, is there any way we can maintain vendor hierarchy with historic past date as validity date.
Appreciate your inputs on this.
Regards
VickeyHi venkat,
I have worked in Territory but never encounter any mass update issue. I dont think that there is any standard API to do so. You would have to write a program/API to do so.
Why mass update of validity dates for Territories ? I am interested to know the current Territory model at your site. When you create any terriotry then its Valid to date remains as 31.12.9999 by dafualt. As per your requirement you can create more valdiity period within this period. Had you delimit the valid to date during Terriotry creation ?
Regards,
Piyush -
Struts: validating date failed
Hello! I have a problem with validating dates:
This is how the field is defined in the validation.xml :
<field property="onhire" depends="required,date">
<arg0 key="new.form.prompt.onhire"/>
<var>
<var-name>datePatternStrict</var-name>
<var-value>yyyy-mm-dd HH:mm</var-value>
</var>
</field>
It handles uncorrect days, f.ex if you try to write 2004-06-32...
But it doesn't handle uncorrect months..., f.ex if you write 2004-13-01, it is accepted and
changed to 2005-01-01... ?! Does anyone have any solution to this. I don't use javascript...
Thanks!!This is a JSF forum, you'd better try a Struts mailing list
http://jakarta.apache.org/site/mail2.html#Struts
or check the archive here http://www.mail-archive.com/[email protected]/
Frederic
Maybe you are looking for
-
OSX 10.9.1 Compatibility issue with Sharp Aquos PN-L702B and PN-L802B
I have Mac Mini's connected to the Sharp Aquos PN-L702B and PN-L802B touch screens and after updating to 10.9.1 am experiencing what appears to be a compatibility issue with the Sharp TPM driver and the OSX 10.9.1. Everything works perfectly previo
-
I am wondering if I can upload Creative Suite 2 to my new IMac??
I am trying to figure out if I can upload my Creative Suite 2 (Cs2) to my new IMac. OSX 10.8.2 I cannot afford the newest version of Photoshop! Will this be compatible and safe to upload? Any help is greatly appreciated
-
Notes in calendar & contacts - Answered
Just got off the phone with Apple customer service about why I wasn't seeing my notes in the calendar events & contacts. "Janet" explained that they will not show up...ever...in the iPod Nano, 3rd generation. Wish I had known this before I purchased
-
When I run my hardware diagnostics I'm getting failures - WDC-WD64-00AAKS-65A7B2 SATA DISK DEVICE, HD535-5W, HD535-3W, HD535-2W. Thanks!!!
-
Exclamation folder and my ruined ipod please help
My ipod no longer responds anymore. It either displays the apple logo, the folder with the exclamation point or nothing at all. My computer will not recognize it when I plug it into the usb port. I've tried resetting it and it does not work. I can't