Configurational settings for data source in BI server

Hi Sdns,
Where can we make  configurational settings for data source in BI server.
Advance thanks to replies.
karun

Go to T-code RSA13.
Search you desired BI system.
Right click on it and Display Data Source Tree.
There you can see all your datasource with BI as source system.
You can do the same for other source systems.
Double click on the datasource to see the fields and configuration.

Similar Messages

  • ODBC call SQLDriverConnect for data source Server name failed: [ . Notify Customer Support.

    Need help !
    While running DS job through designer we are getting below error:
    ODBC call <SQLDriverConnect> for data source <SErver name> failed: <[>. Notify Customer Support.
    Additional notes:
    1. Source and Target datastore are getting connected properly as i have imported table's definition using it.
    2. Source and target data store pointing to SQL server 2008 R2 express edition DB (64 bit).
    3. It seems like server machine has both 32bit and 64bit drivers installed on it. Please refer attached driverdetails.jpg file for more details.
    Thanks

    Hi did you referred this :
    ODBC call <SQLDriverConnect> for data source <MyComputer\SQLServer2008R2> failed: <[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.>. Notify Customer Support.

  • Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

    Hi,
         Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
    of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
    when I try open Lync monitoring service from web UI, 
    http://localhost/ReportServer_LyncMonitoring/
    Web UI is opening but Reports home page is not Accessible , Getting error Like
    "An error has occurred during report processing. (rsProcessingAborted)
    Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
    Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
    The user name or password is incorrect"
    Please help me to trouble shoot this problem.
    Thanks,
    Rajarajan.D

    Hi Rajarajan.D
    You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
    If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
    Georg Thomas | Lync MVP
    Blog www.lynced.com.au | Twitter
    @georgathomas
    Lync Edge Port Check (Beta)
    This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Configuration Settings for Postal Adress Validation and Duplicate Check

    Hi,
    What are The Configuration settings for Postal adress validation and Duplicate Check for Accounts(BP'S) in CRM 7.0 version
    Can some one send me the configuration settings for Postal Adress validation and Duplicate Check
    Thanks & Regards
    Kishor Kumar

    Hi kishore kumar,
    For the Postal code Validation you need to install and configure the following
    Outside of your SAP system:
    1. Install Data Services and the Address Directories.
    2. Install Data Services Component.
    3. Install the RFC Server.
    On your SAP system:
    4. Install the BAdIs from the previous version of this product.
    5. Install the BAdIs support package from this version.
    6. Run the post-installation tasks required of a new installation of the BAdIs.
    7. Activate the IC WebClient, if desired.     
    Thanks
    Jayakrishnan Nair

  • Failed to close connection for data source "EntityDataSource"

    Hi All,
    I have deployed some PowerView reports on SharePoint 2013.
    I have open it on sharepoint, wait for 5 mins & then I try to change any filter then I am getting following error as
    Failed to close connection for data source "EntityDataSource"
    Error Text:
    <detail>
    <ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsErrorClosingConnection</ErrorCode>
    <HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus>
    <Message xmlns="http://www.microsoft.com/sql/reportingservices">Failed to close connection for data source 'EntityDataSource'.</Message>
    <HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorClosingConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0</HelpLink>
    <ProductName xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName>
    <ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion>
    <ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</ProductLocaleId>
    <OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem>
    <CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId>
    <MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices">
    <Source>Microsoft.ReportingServices.ProcessingCore</Source>
    <Message msrs:ErrorCode="rsErrorClosingConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&amp;EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&amp;EvtID=rsErrorClosingConnection&amp;ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&amp;ProdVer=11.0.3128.0"
    xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Failed to close connection for data source 'EntityDataSource'.</Message>
    <MoreInformation><Source></Source><Message>For more information about this error navigate to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation><Warnings
    xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
    Is it because of Session Timeout?or may be something else
    Thanks in advance.

    Hi Rameshwar,
    Pleaese help to collect SharePoint ULS Log related to this issue for further investigation, please see:
    Configure and View SharePoint Log Files and Diagnostic Logging (PowerPivot for SharePoint):
    http://technet.microsoft.com/en-us/library/ee210652.aspx
    In addition, could you please elaborate this issue with more deail how this issue happened? Are you encountered this issue while you view the Power View report on SharePoint site?
    Regards,
    Elvis Long
    TechNet Community Support

  • ChangeConfigurationByName fails with "The specified configuration settings for Settings are invalid."

    Hello,
    I am tryint to update deployment and always have following error
    "The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers."
    Have found similar
    thread  and
    stack overflow - without any success. I am not chaning anyting. Just reading deployment configuration and tryint to update with the same settings. I use .net azure sdk  wrappers to generate requests. Code looks like:
    var deployment = client.Deployments.GetByName(location.DataCenter, location.Cluster);var result = client.Deployments.ChangeConfigurationByName(location.DataCenter, location.Cluster, new DeploymentChangeConfigurationParameters{  Configuration = deployment.Configuration});
    Catched request response from fiddler:
    POST https://management.core.windows.net/[subscription-id]/services/hostedservices/[service-name]/deployments/[deployment-name]/?comp=config HTTP/1.1
    x-ms-version: 2013-11-01
    User-Agent: Microsoft.WindowsAzure.Management.Compute.ComputeManagementClient/0.9.0.0
    client-tracking-id: 2
    Content-Type: application/xml
    Host: management.core.windows.net
    Content-Length: 544
    Expect: 100-continue
    Connection: Keep-Alive
    <ChangeConfiguration xmlns="http://schemas.microsoft.com/windowsazure">
    <Configuration>PFNlcnZpY2VDb25maWd1cmF0aW9uIHhtbG5zOnhzZD0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEiIHhtbG5zOnhzaT0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEtaW5zdGFuY2UiIHhtbG5zPSJodHRwOi8vc2NoZW1hcy5taWNyb3NvZnQuY29tL1NlcnZpY2VIb3N0aW5nLzIwMDgvMTAvU2VydmljZUNvbmZpZ3VyYXRpb24iPiAgPFJvbGUgbmFtZT0ieWF1aGVuLWNjaXMyIj4gICAgPEluc3RhbmNlcyBjb3VudD0iMSIgLz4gIDwvUm9sZT48L1NlcnZpY2VDb25maWd1cmF0aW9uPg==</Configuration>
    <ExtendedProperties />
    </ChangeConfiguration>
    Response
    HTTP/1.1 400 Bad Request
    Cache-Control: no-cache
    Content-Length: 351
    Content-Type: application/xml; charset=utf-8
    Server: 1.0.6198.51 (rd_rdfe_stable.140226-1543) Microsoft-HTTPAPI/2.0
    x-ms-servedbyregion: ussouth
    x-ms-request-id: dcb1c5aedb5872d4aaf90acfede2de0b
    Date: Tue, 04 Mar 2014 13:38:10 GMT
    <Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><Code>BadRequest</Code><Message>The specified configuration settings for Settings are invalid. Verify
    that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message></Error>
    the same data returned by operation status. Decoded base-64 encoded string looks like
    <ServiceConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration">
    <Role name="yauhen-ccis2">
    <Instances count="1" />
    </Role>
    </ServiceConfiguration>
    Have tried without new line symbols, without xmlns, updating by production. without any success

    Hi,
    The configuration file is a file with extension .cscfg. If you have Visual Studio, the file is automatically generated when you create the project, and automatically updated when you modify the project's properties.
      >> Not sure were could I get content of this file from api?
    It's needed to encode this file's content use base64, and put the result in the body of your request. (Please refer to
    http://msdn.microsoft.com/en-us/library/windowsazure/ee758710.aspx for more information.) 
      >> <ChangeConfiguration xmlns="http://schemas.microsoft.com/windowsazure">
    <Configuration>PFNlcnZpY2VDb25maWd1cmF0aW9uIHhtbG5zOnhzZD0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEiIHhtbG5zOnhzaT0iaHR0cDovL3d3dy53My5vcmcvMjAwMS9YTUxTY2hlbWEtaW5zdGFuY2UiIHhtbG5zPSJodHRwOi8vc2NoZW1hcy5taWNyb3NvZnQuY29tL1NlcnZpY2VIb3N0aW5nLzIwMDgvMTAvU2VydmljZUNvbmZpZ3VyYXRpb24iPiAgPFJvbGUgbmFtZT0ieWF1aGVuLWNjaXMyIj4gICAgPEluc3RhbmNlcyBjb3VudD0iMSIgLz4gIDwvUm9sZT48L1NlcnZpY2VDb25maWd1cmF0aW9uPg==</Configuration>
    However, may I know how you find the body for your request? (It seems you do a base64 decoding, you find it is a valid configuration file, but it doesn't have any configuration settings.) Actually, the settings defined in csdef needed to
    be contained in the configuration file.
    Best Regards,
    Ming Xu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How do I get the configuration settings for GPRS mms ect for EE

    Hiya :)
    My son-in-law got a new iphone4s as an upgrade from EE/orange on Tuesday 18th feb 2014
    It was an upgrade for his sim only contract changed to a phone and sim
    The first phone he had was a samsung galaxy s3 mini but he couldn't get used to it as had used his old iphone4 for over 4 years before it died
    The samsung galaxy s3 mini was sent back and a nice shiny iphone4s was sent out instead and he got it on the date up top
    The sim that came with the iPhone keeps saying invalid for some reason?
    But the sim he got with the sg3 mini works but has no configuration settings for the iphone4s in it only for the sg3 mini
    We have tried online looking for the settings for wap/GPRS/mms/edge ect to send via SMS but can't seem to find anywhere that works?
    Can anybody help please?
    His partner (my daughter) is expecting there 2nd baby and he wants these set up ASAP
    He can recieve calls and make calls and do the same with SMS but no Internet/mms ect

    Check out FEBE. <br />
    https://addons.mozilla.org/en-US/firefox/addon/2109/

  • OWB 10g -- Can't Create Database Links for Data Source and Target

    We installed OWB 10g server components on a Unix box running Oracle 10g (R2) database. The Designer Repository is in one instance. The Runtime Repository and the Target are in another instance. The OWB client component was installed on Windows XP. We create a data source module and a target module in OWB. The data source is on another Unix box running Oracle 9i (R2) database. We try to create database links for data source module and target module, respective. But when we created and tested the DB links, the DB links were failed.
    For the database link of data source, we got the following error message:
    Testing...
    Failed.
    SQL Exception
    Repository Error:SQL Exception..
    Class Name: CacheMediator.
    Method Name: getDDEntryFromDB.
    Repository Error Message: ORA-12170: TNS:Connect timeout occurred
    For the database link of target , we got the following error message:
    Testing...
    Failed.
    API2215: Cannot create database link. Please contact Oracle Support with the stack trace and the details on how to reproduce it.
    Repository Error:SQL Exception..
    Class Name: oracle.wh.ui.integrator.common.RepositoryUtils.
    Method Name: createDBLink(String, String, String, String).
    Method Name: -1.
    Repository Error Message: java.sql.SQLException: ORA-00933: SQL command not properly ended.
    However, we could connect to the two databases (data source and target) using the OWB’s utility SQL Plus.
    Please help us to solve this problem. Thank you.

    As I said prior the database link creation should work from within the OWB client (also in 10).
    Regarding your issue when deploying, have you registered your target locations in the deployment manager and did you first deployed your target location's connector which points out to your source?
    I myself had some problems with database link creations in the past and I can't remember exactly what they were but it had something to do with
    - the use of abnormal characters in the database link name
    - long domain name used in as names.default_domain in my sqlnet.ora file
    What you can do is check the actual script created when deploying the database link so see if there's something strange and check if executing the created script manually works or not.

  • Connection verification failed for data source using mySQL

    Hi,
    I having problem with mySQL datasource and getting the above error. This is only happening in our staging server. We are using ColdFusion 8 running JRUN4 and trying to connect to mySQL v 5.1.41. I tried adding DSN from my localhost using ColdFusion 9 developer edition and I am able to connect without error.I know that mysql server, username & password is valid. I can access the mysql also using mySQL gui tool from different pc and it works fine. I'm believe that this has something to do with mySQL driver? Can somebody shed some light on how can I fix my DSN connection problem? Thank you.
    here's the error:
    Connection verification failed for data source: forum
    com.mysql.jdbc.CommunicationsException: Communications link failure  due to underlying exception:   ** BEGIN NESTED EXCEPTION **   java.net.ConnectException MESSAGE: Connection timed out: connect  STACKTRACE:  java.net.ConnectException: Connection timed out: connect      at java.net.PlainSocketImpl.socketConnect(Native Method)      at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)      at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)      at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)      at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)      at java.net.Socket.connect(Socket.java:519)      at java.net.Socket.connect(Socket.java:469)      at java.net.Socket.(Socket.java:366)      at java.net.Socket.(Socket.java:208)      at  com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:173)       at com.mysql.jdbc.MysqlIO.(MysqlIO.java:267)      at com.mysql.jdbc.Connection.createNewIO(Connection.java:2739)      at com.mysql.jdbc.Connection.(Connection.java:1553)      at  com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266)       at  coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java:589)       at  coldfusion.server.j2ee.sql.pool.ConnectionRunner$RunnableConnection.run(ConnectionRunner. java:67)       at java.lang.Thread.run(Thread.java:619)   ** END NESTED EXCEPTION **    Last packet sent to the server was 0 ms ago.

    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=6ef0253
    HTH
    Tim Carley
    www.recfusion.com
    [email protected]

  • Connection verification failed for data source:

    Hi,
    I having problem with mySQL  datasource and getting the above error. This is only happening in our  staging server. We are using ColdFusion 8 running JRUN4 and trying to  connect to mySQL v 5.1.41. I tried adding DSN from my localhost using  ColdFusion 9 developer edition and I am able to connect without error.I  know that mysql server, username & password is valid. I can access  the mysql also using mySQL gui tool from different pc and it works fine.  I'm believe that this has something to do with mySQL driver? Can  somebody shed some light on how can I fix my DSN connection problem?  Thank you.
    here's  the error:
    Connection verification failed for data  source: forum
    com.mysql.jdbc.CommunicationsException: Communications  link failure  due to underlying exception:   ** BEGIN NESTED EXCEPTION  **   java.net.ConnectException MESSAGE: Connection timed out: connect   STACKTRACE:  java.net.ConnectException: Connection timed out: connect       at java.net.PlainSocketImpl.socketConnect(Native Method)      at  java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)      at  java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)       at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)       at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)       at java.net.Socket.connect(Socket.java:519)      at  java.net.Socket.connect(Socket.java:469)      at  java.net.Socket.(Socket.java:366)      at  java.net.Socket.(Socket.java:208)      at   com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:173)        at com.mysql.jdbc.MysqlIO.(MysqlIO.java:267)      at  com.mysql.jdbc.Connection.createNewIO(Connection.java:2739)      at  com.mysql.jdbc.Connection.(Connection.java:1553)      at   com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266)        at   coldfusion.server.j2ee.sql.pool.JDBCPool.createPhysicalConnection(JDBCPool.java  :589)       at   coldfusion.server.j2ee.sql.pool.ConnectionRunner$RunnableConnection.run(Connect  ionRunner.java:67)       at java.lang.Thread.run(Thread.java:619)   **  END NESTED EXCEPTION **    Last packet sent to the server was 0 ms ago.

    Also make sure your firewall has the required port open (1433
    default) and if you are running 2003 on the SQL box, especially if
    you ran the security Wizard, make sure the IPSec is allowing the CF
    box to communicate with it, and vise verse.

  • Connection verification failed for data source on port 1433

    Trying to set up a DSN for a SQL Server database on a new computer and it's failing every time.
    Connection verification failed for data source: csf
    java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect
    The root cause was that: java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect
    Now, when I installed CF 11, it installed on port 8500.  However, when I try changing the port in the setup to 8500, I get this error:
    Connection verification failed for data source: csf
    java.sql.SQLException: Timed out trying to establish connection
    The root cause was that: java.sql.SQLException: Timed out trying to establish connection
    I cannot find anything online on how to fix this!  HELP!!! 

    Hi,
    Is that SQL Express edition? If so perhaps TCP protocol is not enabled. Is Windows firewall turned on? Check port 1433 is open.
    Normally you would not create a datasource to apache port 8500, that is a web server not database server port.
    HTH, Carl.

  • Cannot impersonate user for data source 'SMSDB'. --- Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. ---

    After Upgrading from SCCM 2012 Sp1 to SCCM 2012 R2 we are getting following error:
    System.Web.Services.Protocols.SoapException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
    Cannot impersonate user for data source 'SMSDB'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. ---> System.Runtime.InteraopServices.COMException: The referenced account is currently locked out and may not
    be logged on to. (Exception from HRESULT: 0x80070775)
       at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
       at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
    Microsoft.ConfigurationManagement.ManagementProvider.SmsException
    An error has occurred during report processing.
    Stack Trace:
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    System.Web.Services.Protocols.SoapException
    System.Web.Services.Protocols.SoapException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
    Cannot impersonate user for data source 'SMSDB'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. ---> System.Runtime.InteropServices.COMException: The referenced account is currently locked out and may not
    be logged on to. (Exception from HRESULT: 0x80070775)
       at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
       at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
    Stack Trace:
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
       at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)

    HI,
    Check the SQL Reporting services account that is used, the one that you supplied when setting up the SQL Reporting Services point in the Configuration Manager 2012 console, it seems to be locked out.
    I believe it has been asked once before on the forums as well.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Issue with table ROOSPRMSF entries for data source 0FI_AP_4

    Hi Experts,
    I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
    In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
    We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
    But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
    I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries.   Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
    Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
    In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
    But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL. 
    From OSS note 852443 point 3
    "3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
    My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE  copy entries into ROOSPRMSF table in R/3 ?
    Could any one please clarify this ?
    Thanks
    Regards,
    Jeswanth

    Hi Amarnath,
    Did you unhide the new field in RSA6 and regenerated the DataSource?
    Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
    If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
    Grtx,
    Marco

  • REST API: Create Deployment throwing error BadRequest (The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.)

    Hi All,
    We are trying to access the Create Deployment method stated below
    http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
    We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
    fine.
    Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
    part.
    byte[] bytes =
    new byte[fupldConfig.PostedFile.ContentLength + 1];
                fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
    string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
    string base64ConfigurationFile = a.ToBase64();
    X509Certificate2 certificate =
    CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
    HostedService.CreateNewDeployment(certificate,
    ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
    "2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
    "AzureEcoystemDeployment",
    "http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
    "AzureEcoystemDeployment", base64ConfigurationFile,
    true, false);   
    <summary>
    /// </summary>
    /// <param name="certificate"></param>
    /// <param name="subscriptionId"></param>
    /// <param name="version"></param>
    /// <param name="serviceName"></param>
    /// <param name="deploymentSlot"></param>
    /// <param name="name"></param>
    /// <param name="packageUrl"></param>
    /// <param name="label"></param>
    /// <param name="base64Configuration"></param>
    /// <param name="startDeployment"></param>
    /// <param name="treatWarningsAsError"></param>
    public static
    void CreateNewDeployment(X509Certificate2 certificate,
    string subscriptionId,
    string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
    string name, string packageUrl,
    string label, string base64Configuration,
    bool startDeployment, bool treatWarningsAsError)
    Uri uri = new
    Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
    XNamespace wa = Constants.xmlNamespace;
    XDocument requestBody =
    new XDocument();
    String base64ConfigurationFile = base64Configuration;
    String base64Label = label.ToBase64();
    XElement xName = new
    XElement(wa + "Name", name);
    XElement xPackageUrl =
    new XElement(wa +
    "PackageUrl", packageUrl);
    XElement xLabel = new
    XElement(wa + "Label", base64Label);
    XElement xConfiguration =
    new XElement(wa +
    "Configuration", base64ConfigurationFile);
    XElement xStartDeployment =
    new XElement(wa +
    "StartDeployment", startDeployment.ToString().ToLower());
    XElement xTreatWarningsAsError =
    new XElement(wa +
    "TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
    XElement createDeployment =
    new XElement(wa +
    "CreateDeployment");
                createDeployment.Add(xName);
                createDeployment.Add(xPackageUrl);
                createDeployment.Add(xLabel);
                createDeployment.Add(xConfiguration);
                createDeployment.Add(xStartDeployment);
                createDeployment.Add(xTreatWarningsAsError);
                requestBody.Add(createDeployment);
                requestBody.Declaration =
    new XDeclaration("1.0",
    "UTF-8", "no");
    XDocument responseBody;
    RestApiUtility.InvokeRequest(
                    uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
    HttpStatusCode.Accepted, requestBody, certificate, version,
    out responseBody);
    <summary>
    /// A helper function to invoke a Service Management REST API operation.
    /// Throws an ApplicationException on unexpected status code results.
    /// </summary>
    /// <param name="uri">The URI of the operation to invoke using a web request.</param>
    /// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
    /// <param name="expectedCode">The expected status code.</param>
    /// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
    /// <param name="responseBody">The XML body returned by the request, if any.</param>
    /// <returns>The requestId returned by the operation.</returns>
    public static
    string InvokeRequest(
    Uri uri,
    string method,
    HttpStatusCode expectedCode,
    XDocument requestBody,
    X509Certificate2 certificate,
    string version,
    out XDocument responseBody)
                responseBody =
    null;
    string requestId = String.Empty;
    HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
                request.Method = method;
                request.Headers.Add("x-ms-Version", version);
                request.ClientCertificates.Add(certificate);
                request.ContentType =
    "application/xml";
    if (requestBody != null)
    using (Stream requestStream = request.GetRequestStream())
    using (StreamWriter streamWriter =
    new StreamWriter(
                            requestStream, System.Text.UTF8Encoding.UTF8))
                            requestBody.Save(streamWriter,
    SaveOptions.DisableFormatting);
    HttpWebResponse response;
    HttpStatusCode statusCode =
    HttpStatusCode.Unused;
    try
    response = (HttpWebResponse)request.GetResponse();
    catch (WebException ex)
    // GetResponse throws a WebException for 4XX and 5XX status codes
                    response = (HttpWebResponse)ex.Response;
    try
                    statusCode = response.StatusCode;
    if (response.ContentLength > 0)
    using (XmlReader reader =
    XmlReader.Create(response.GetResponseStream()))
                            responseBody =
    XDocument.Load(reader);
    if (response.Headers !=
    null)
                        requestId = response.Headers["x-ms-request-id"];
    finally
                    response.Close();
    if (!statusCode.Equals(expectedCode))
    throw new
    ApplicationException(string.Format(
    "Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
                        uri.ToString(),
    Environment.NewLine,
                        (int)statusCode,
                        statusCode,
                        responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
    return requestId;
    But every time we are getting the below error from the line
     response = (HttpWebResponse)request.GetResponse();
    <Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
      <Code>BadRequest</Code>
      <Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
    </Error>
     Any help is appreciated.
    Thanks,
    Shubhendu

    Please find the request XML I have found it in debug mode
    <CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
      <Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
      <PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
      <Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
      <Configuration>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</Configuration>
      <StartDeployment>true</StartDeployment>
      <TreatWarningsAsError>false</TreatWarningsAsError>
    </CreateDeployment>
    Shubhendu G

  • Error while activationg BI content for BI admin cockoit for data sources

    Hi all,
    I am doing BI content activation for BI admin cockpit, from SPRO -- Activation of BI content of BI admin cockpit , i ran the activation but it got failed. The error message says:
    DataSource 0TCTBWOBJCT_ATTR from source system BWQCLNT500 could not be activated
    This error is coming for data sources :0TCTPRCSVAR_ATTR, 0TCTBWOBJCT_TEXT, 0TCTPRCSVAR_TEXT and 0TCTBWOBJCT_ATTR.
    I have applied the sap note 1110642 , 1110641 . also ran the program  RSSM_SHIPDVERS_CLEANUP  but did not able to find these info packages for this data spurces:
    0PAK_8K20VQGEBZRQXUE2PKWS90ZO8
    0PAK_934GEKKIBBDKPVMVDJHVNPIMV
    0PAK_99MQNPZISKNSNWKT9HF2CWPLK
    0PAK_BFYU3MMMU2T2WOI50MXHCEH07
    I also tried activating these data sources manually in BI content one by one , there alaso iam getting error :
    Data source can not be actvatedm, troied in RSDS also by replicating but says there also that this data source does not exist in source system.
    Due to this data sources iam geting problem inmy process chain..
    PLease help .Pts wil be assigned.
    Thanks and Regards.
    Akash

    First of all Rather than using SPRO to install Admin Cockpit, its better to install it from Business Content, else many of your existing InfoObjects would get overwritten and you would require to revert them back.
    2ndly, check if these DataSources are available in your source system. While installing from Business Content, the system prompts to log in to source system interactively and would install the DataSources in teh source system if they are not there already.
    Also check what versions are your Source Systems on. Older versions may not have the DataSources while the new concept of Admin Cockpit is available in BI7.0 which goes well with ECC.
    Regards
    Anujit Ghosh

Maybe you are looking for