Configurations for WSUS on SBS 2008 & 2011

I came across some issues with configuring WSUS on a SBS server for the first time and had a couple of questions.
1. Will WSUS work if you change any configurations on the SBS server? (ex. Product & GP)
2. Can you configure WSUS the way you want and just use the WSUS console instead of the SBS console update?
3. What would the best approach on re-downloading updates after the WSUS content folder has been deleted without the reset command?

Hi,
>>1. Will WSUS work if you change any configurations on the SBS server? (ex. Product & GP)
Please make sure that the settings of the WSUS are applied to the client properly through Group Policy.
>>2. Can you configure WSUS the way you want and just use the WSUS console instead of the SBS console update?
Yes, for detailed information, please refer to the link below:
https://technet.microsoft.com/en-us/library/hh334984%28v=ws.10%29.aspx
>>3. What would the best approach on re-downloading updates after the WSUS content folder has been deleted without the reset command?
wsusutil reset
For detailed information, please refer to the link below:
https://technet.microsoft.com/en-us/library/cc720466(v=ws.10).aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Extend SBS 2008 - 2011 Migration

Yes, I know the SBS party has passed. But, I have a client who purchased it before the end of the year, and we are now doing a migration from SBS 2008 to SBS 2011. However, it is taking longer than 21 days.
I know with SBS 2003, you can suspend SBCore and extend the migration.
Can you do the same with SBS 2008?

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet
Subscriber Support
If you are TechNet
Subscription user and have any feedback on our support quality, please send your feedbackhere.
Andy Qi
TechNet Community Support

Problem connecting to MS Exchange 2007 on SBS 2008

I am having problems connecting to Exchange via cfexchangeconnection. Our ColdFusion environment is CF9 Enterprise on Win 2008, and the Exchange host is Win SBS 2008 (which uses IIS7).
After having worked through the documentation and following all procedures outlined at
http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec14f31 -7fed.html
plus googling intensively, we have the following method to test the connection
<cfexchangeconnection action="open"
         connection="thisExchangeConnection"
         server="portal.mydomain.com"
         protocol="https"
         formBasedAuthentication="true"
         formBasedAuthenticationURL="https://portal.mydomain.com/owa/auth/owaauth.dll"
         mailboxname="myMailBox"
         username="myUsername"
         password="myPassword" />
<cfdump var="#thisExchangeConnection#">
<cfexchangeconnection action="close"
         connection="thisExchangeConnection" />
The IIS7 implementation in SBS 2008 is quite a lot different to Win 2008, so there are some question marks around some steps in the above documentation. However, we have made sure that:-
1) you can use the credentials above to login via a web browser
2) WebDav is on in IIS
3) there is no IWA and forms based authentication is on
4) certificates are installed correctly on both the CF and Exchange servers
5) the myUsernameaccount has correct permissions in iis/owa/exchange
Despite this, the net result is always
Access to the Exchange server denied.
Ensure that the user name and password are correct.
From research it seems that a lot of people have issues where the underlying problem is actually an Exchange 440 timeout error where the password in the IUSR_<servername> and IWAM_<servername> (IIS/Active Directory) is out of sync.
I was pinning my hopes on the above being the problem but now I find that in SBS 2008 there is no IWAM_<servername> server account.
All this leads me to ask is SBS 2008 actually compatible with the cfexchange tags in CF9? There is nothing in the documentation that I can find that syays that it isn't, but given the amount of time we've spent on what should be straightforward I am wondering if we are on a hiding to nothing. Anyone from Adobe care to comment?
If anyone has managed to get this to work specifically with SBS 2008, or has any advice I'd be grateful to here from you.

Hi,
As said by Sneff , I would also recommend to enable Logging to get more detailed information. Also follow
Configuration of POP/IMAP on SBS 2008 Refer to :
http://blogs.technet.com/b/sbs/archive/2008/09/19/how-to-configure-sbs-2008-to-host-pop3-imap4.aspx
http://blogs.technet.com/b/sbs/archive/2011/08/31/how-to-configure-outlook-for-pop3-imap-and-smtp-connectivity-in-sbs-2008-2011-standard.aspx
As per the error code, you need to follow
http://support.microsoft.com/kb/813514/EN-US
I would also disable AV on both Client machine and TEST , including the Filters of AV.
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Upgrading exchange but want to leave SBS 2008 server in place.

Hello TechNet
I would like to install an exchange 2013 server in my organization, currently i have a sbs 2008 server. I would like to keep the remote user functionality of sbs but upgrade the exchange. If that's not possible i am still upgrading exchange. Does anyone
have a best practice steps for moving from SBS 2008 to exchange 2013. Should i just fallow the upgrade path from exchange 2007 to exchange 2013? The server i'm installing exchange on is a AD server on the domain currently and is running Windows server 2012.
Thanks in advance for any advice or help.
Bri
RBIT@CA

We went that route as a stop gap when hardware constrained us: SBS 2008 successfully virtualised on a 2012 R2 Hyper-V host. It was not all plain sailing. Having shut down and disabled all the services on the physical SBS2008,
we used the Sysinternals disk2vhd tool to get two vhds (C: was system, E: was all the data including Exchange info stores), converted to vhdx using 2012.R2 Hyper-V manager and built a VM using these vhdxs. It booted at first but then
froze at restart after the Hyper-V host tools were automatically installed. We found a work round which involved running the MS System Update and recovery Tool (SURT) after the VM initial boot and before any subsequent VM restart. Once services
were put back to normal, the virtualised SBS 2008 ran fine.
There is some doubt as to whether this is a supported configuration, and it will not be easy to configure robust backups (see
this thread). However, our SBS2008 VM has been running for over a year in this configuration and am just now planning a move to Office 365 integrated Exchange with onsite Exchange 2013 plus virtualised 2012.R2 DC as per Larry's first reply.
Good luck which ever way you go, and tread carefully!

Kerberos with sbs 2008

Hello,
I've installed VDI 3.1 EA and i am trying to configure user directory using sbs 2008,
previously i established a connection to win 2000 AD but but when i change the krb5.conf
to connect to sbs 2008 i can connect through command line with kinit -V and
nslookup but in the wizard i get an error: unable to contact user directory.
any suggestions?
thank in advance,
-Michael.

Hi,
after changing the Kerberos config file you need to restart the Common Agent Container:
cacaoadm stop --force
cacaoadm start
This page gives you instructions to find more details about an error with the directory:
http://wikis.sun.com/pages/viewpage.action?pageId=171840712
log file is /var/cacao/instances/default/logs/cacao.0
Hope this helps,
Katell

How can I edit the way autodiscover.xml behaves in SBS 2008 and 2011?

I have autodiscover working correctly on a few SBS 2008 and SBS 2011 servers. But, its doing its usual misbehaving. When setting up a new Outlook profile, the user enters their email address and password. Autodiscover is successful in creating all
the account settings, but at the end of the wizard a username and password window pops up with the users full email address incorrectly filled in as the username, which is why it didn't work.
This has always been so annoying about SBS. The user then has to be told to delete their email address in the username field, then fill in "domain\username" instead. Only then is the authentication successful.
I've read lots about people adding the external domain UPN Suffix to ADD&T, then manually changing ever users login to domain.com instead of domain.local.   Then you have to mess with the owa authentication settings in exchange to accept the
UPN.   Its all too ridiculous. There must be a simpler way.
I have read about how you can control how the autodiscover.xml behaves, and there are examples of how to do it in this document:
https://docs.google.com/viewer?a=v&q=cache:0jap1FNKgV0J:https://support.quest.com/Shared/Images/SOL51188_Outlook%2520Automatic%2520Account%2520Configuration.doc+&hl=pl&gl=pl&pid=bl&srcid=ADGEESjizUeFf-JYaM7ZdfIgUCKMMXtcCl0Y3pknFbuwd64GNHIEP1K8a_mpg2YIEisP6sz5DzbtVtdW4Pc42PE0Kjd6bz-3vXz0iaQm7FKi0AnwgvFG_41ZAkBLWynaJtf8s8xyi_d2&sig=AHIEtbSie1mEHTn8el4DPquNxrpovwknUQ
The document above shows the settings we need to change. It looks like we can add the local domain using DomainName into the autodiscover.xml and this will stop autodiscover reporting that the full email address is required.  So we
should be able to get autodiscover to populate the username pop-up with with "domain\user" automatically.
OK, so my question is, how on earth do I edit these settings in SBS 2011? I can't find any articles that talk about how to edit autodiscover.
If I could just edit this one setting (that Microsoft should have correctly configured in the first place) autodiscover will work perfectly for all existing users and all future users, without having to do anything.

Just to straighten out a few things;
1) This is NOT a bug, rather by design. Not every active directory has an exchange server in place, and MS is assuming you don't want to give your internal domain name out to people (which is why it doesn't default to domain\username)
2) Going on what I said in 1), this is NOT SBS specific this is the same way with every Active Directory/Exchange install, keep in mind Microsoft did NOT specially design the software for SBS, they just bundled it into a supported configuration in a neat
little package -since the Exchange server we run on SBS is the same Exchange server powering hundreds of hosted email providers -it makes sense why autodiscover doesn't provide the domain\username (imagine what a mess that would be!)
3) I understand it's a little bit time consuming but it can actually be done for all users in a matter of seconds, select all users, right click and go to Properties, you can then choose the UPN Suffix for all users. When a new user gets created one of the
settings in the wizard is the UPN suffix and is easily changeable as long as you notate for the person creating the user to do it. (The problem here is if you're using the SBS Console instead of AD to setup the User in which case that's just an oversight
in design not a bug in the programming)
4) You can most certainly have a powershell script that changes the UPN suffix from A to B, let me know if you're interested I'll dig one up for you. That can be run on a scheduled task and will solve the remaining issues you have :)
I do see you mentioned it in number 3, I must have missed since I didn't re-read the OP before posting the article, however I just tested on several SBS 2011 machines and OWA authentication settings don't have to be changed at all, this worked immediately
for Outlook Anywhere and Outlook Web Access in my lab and two different customer production systems.
-GreenlightTech

How to configure email alerts on SBS 2011

It was kind of annoying, but SBS 2003 could send email alerts for all kinds of conditions. The alert function is no longer there in SBS 2011. Is there any way to configure these alerts - like when the server restarts - or the Exchange Store has
shut down, etc.
Thanks!

Dear Mike,
I am 12 months on from replacing SBS 2003 with SBS 2011 at one site, SBS 2012 at another and SBS 2008 at a third. Its just me and around 250 users in about 7 countries and 3 continents - such is the charity sector. I have not had the time to
research automatic alerts up till now and missed a failing backup as a result. Your article is very helpful. I hadn't put my email address in the box that you indicated. Its been a great puzzle to me that the level of reporting was so abysmal
after the change to the later generation of SBS, but the pressure of work never allowed time to check. False economy I would say, now, but thanks for this very clear and helpful item.

SBS 2008 to 2011 - Forgot to Remove Exchange

Argh! Following the doc for SBS 2008 to SBS 2011 migration. I guess I lost my place.... Went to demote server, I had to remove Certificate Authority first. The instructions for this were AFTER removing Exchange, so I did the Certificate
stuff, FORGOT about Exchange, and kept going....
Since my 21 days were up, I simply shut off the old server.
IN Exchange, the main mailbox, the Outlook Address Book Offline, Public Folders, etc, are all on the new server. When I run the EMC, it does list the 2nd server.
Since I am out of time, have already removed AD from the source server, how much pain do you think this can cause if we just keep the old server off, and cross our fingers?? How bad would it be to turn on the Source Server, reinstall AD services, THEN
remove Exchange, then AD? Would re-adding AD screw up everything?
Appreciate any comments (except telling me to RTFI, lol. Believe me, I wish I had).

No one? I was hoping some sort of MVP or MS Employee would at least offer an opinion as to how bad this is....

Is it possible to manually setup a Folder Redirection Policy on SBS 2008 for one user? Also are you able to set up folder redirection on a different server than you have SBS 2008 on?

I have a SBS 2008 DC I would like to be able to change the Folder Redirection to a different server. I also would like to be able to test with one user. I read on the forums that it is best to use the wizards for SBS2008. The only problem
I have with using the wizards is that I am unable to test and I am also unable to use a network share for my redirection location.

Hi,
I am sure you would get some help from :
http://blogs.technet.com/b/sbs/archive/2010/10/08/folder-redirection-in-small-business-server-2008.aspx
https://social.technet.microsoft.com/Forums/en-US/448583ca-471e-4a0c-9d26-aa9181e73962/folder-redirection-changing-location?forum=smallbusinessserver
User setting can be found:
Windows SBS Console > Shared Folders and Web Sites > Shared Folders - in Tasks panel click on Redirect folders for user accounts to the server.
Under Folder Names Select folder(s) you want to redirect (e.g. Documents).
Under User Accounts select accounts you want to have folders redirected.
Click OK
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Enterprise Hotfix Rollup for Win7 and Server 2008 R2 via WSUS

I stumbled across the fact that Microsoft released a hotfix rollup for Win7 and Server 2008 R2 that contains 90 hotfixes
http://support.microsoft.com/kb/2775511/en-us
The articled I linked above talks about after installing 2775511 (the big hotfix rollup containing 90 hotfixes) it is also necessary to install three more hotfixes:
After this update is installed, you must install update 2732673 to fix a regression issue in the Rdbss.sys file
After this update is installed, you must install update 2728738 to fix a regression issue in the Profsvc.dll file
After this update is installed, you must install update 2878378 re-released on November 11, 2013 to fix a regression issue in the Advapi32.dll file
I have imported all four of these hotfixes into my WSUS server. Do I need to install 277551 first and then install the other three or can all four be approved and go out at once? I guess I am hung up on the language of "After this update is installed
.... ". I want to put all 4 of these on our Win7 machines as well as my 40+ WinServer 2008 R2 machines

I read somewhere that over half of the updates included in Win7 SP1 and WinServer 2008 R2 SP1 were originally released as hotfixes. This means Microsoft made the decision that a large number of hotfixes would benefit every user of these two OSs
I think your conclusion is flawed. The only thing that you can draw from the presented statistic, is that Microsoft determined that a significant percentage of updates originally released as hotfixes warranted the additional investment in regression testing
to subsequently release those hotfixes as updates.
The fact that they bundled these 90 hotfixes together leads me to the same conclusion.
In fact, exactly the opposite conclusion applies: What you have in this package is all the rest of the stuff that didn't make that cut. What you have in this package are still NOT-regression tested hotfixes, they've just been bundled up for easy deployment
(and note that three of them got further broken in the process of bundling), causing yet three more hotfixes to have to be released.
In fact I read the MS Team Blog about this big hotfix release and they say the same thing, all users of these OSs would benefit from the installation of this hotfix rollup, not just a subset of users.
I suspect there are a notable number of patch administrators and systems administrators who would disagree with that self-serving promotion. If, in fact, it's true that "all users" would benefit, then the product team should have invested the effort in properly
regression testing those hotfixes, and releasing them as REAL updates. They did not; ergo the *actual* value is less than claimed.
Of course the bugaboo here is the fact that three other individual hotfixes need to be installed after the big hotfix rollup is installed.
Exactly! (And those are just the attempted fixes that broke something. Who knows how many other "fixes" may still result in newly discovered "broken stuff" that was never broken in the first place.)
The second part of this question should revolve around an itemized review of the hotfixes contained in this rollup with one simple question asked for each:
Have we actually *experienced* the issue addressed by this hotfix.
Where hotfixes are concerned one very simple but important rule applies:
If it ain't broken, don't try to fix it!
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

How to create ADC in SBS 2008 64 bit Server for SBS 2003 32 bit Server?

Hi,
We have single windows SBS 2003 32 bit server with AD to run database as well as application of the Company. We are planning to add one more server to the network with SBS 2008 64 bit for load balancing. I just confused that two SBS servers are not compatible
in the SBS network. my requirement is to balance the database and application request load balancing along with fail over management with two Servers in the network.
Please let me know the procedure to add the SBS 2008 64 bit server as Additional Domain Controller to SBS 2003 32 bit PDC so that ADC to take role if PDC fails.
Any other ways to meet my requirement?

Hi Mallensh Patil,
Would you please let us know current situation of this issue?
I agree with Cliff. Just addition, please also refer to following article and check if can help you.
Debunking Myths About Additional Domain Controllers In SBS Domains
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

WSUS timeout issues on SBS 2008 with WSUS 3.0

I am having a heck of a time using the Server Cleanup Wizard, keep getting timeouts on the Unused updates and update revisions section.
After a few hours I get the timeout message and an option to reconnect to the node.
Here is the message that I copied to the clipboard, which is also in the event viewer as event id 7042:
The WSUS administration console was unable to connect to the WSUS Server Database.
Verify that SQL server is running on the WSUS Server. If the problem persists, try restarting SQL.
System.Data.SqlClient.SqlException -- Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The statement has been terminated.
Source
.Net SqlClient Data Provider
Stack Trace:
   at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
   at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.ServerCleanup.ServerCleanupWizard.OnCleanupComplete(Object sender, PerformCleanupCompletedEventArgs e)
I have tried, I believe, all of Mr. Garvin's excellent advice, like defrag the file system, run the maint. script, and do the options of the cleanup wizard one at a time. All of the other options worked.
I have also declined all the superseded updates, checked to make sure only my products were downloaded, and made sure that updates are only in English.
I followed Mr. Garvin's excellent post at the PatchZone, and tried to read everything he has written about this subject (that was a lot of content!) At this point I think I am stumped, what else can I try other than a re-install of WSUS, which I don't
really want to do, but will if that's the only option. Is that even possible with SBS 2008?
Thank you all in advance!

I followed Mr. Garvin's excellent post at the PatchZone, and tried to read everything he has written about this subject (that was a lot of content!). At this point I think I am stumped
Perhaps you overlooked the singular advice to Keep Running the "Delete unused updates.." until it does NOT timeout?
This operation is atomic. It does make progress each time you run it. The timeout is a manifestation of ASP.NET getting bored waiting on the SQL Server Stored Proc, NOT a manifestation of anything failing inside the database. Each time you run the task and
it times out, it DID delete some updates (you just don't get any stats on that because ASP.NET wimped out). When the task finally completes successfully, the SCW UI will show you the results (from the last run).
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Windows SBS 2008 Deployment Report for Updates in SBS Console Is Empty

The SBS Console on my Windows SBS 2008 is able to report updates which are available for deployment, and it also is aware of the number of computers which are affected by the update in the Security>Updates summary page in the SBS console. However, if
I select an update and click "View the update deployment report," there are no computers listed.
I have gone through the steps outlined in these posts:
Repair monitoring and reporting features in Windows Small Business Server 2008
SBS2008: Windows SBS Console may crash because of incorrect Environment Variables
My variables read read TEMP=C:\user\me\appdata\local\temp\1 and TEM=C:\user\me\appdata\local\temp\1 from the command line, but in the Environment Variables window, they both read as C:\user\me\appdata\local\temp\
SBS 2008 Console May Take Too Long to Display Alerts and Security Statuses, Display Not Available, or Crash
(I was unable to run this from the command line, even though I was running the command as administrator, and had remote connections allowed. I ended up running this command in the SQL management studio.)
Repair Windows Update Services
I am sorry for the missing hyperlinks, but I am not allowed to post them until my account has been verified. Searching for the article titles in bold will take you to the referenced page. I thought it would be helpful to mention the steps I have tried to take
before taking to the forums with my problems.
Any ideas? Does this need any clarification?

I did take a look at the console. When I refresh the list under the Updates
tab in the Security ribbon, I get multiple lines of:
[11340] 140114.090516.2325: Update Services: GetConfiguration: level Medium is read from config file C:\Program Files\Windows Small Business Server\Data\sbsconfig.xml
[16772] 140114.090535.4166: Update Services: GetConfiguration: level High is read from config file C:\Program Files\Windows Small Business Server\Data\sbsconfig.xml
Then, every time I try to view the computers to which a particular update apply, the console throws these lines into the Console.log:
[8416] 140114.090659.3547: AdminTME: Committer: RunAsync TaskViewDeploymentReport
[21016] 140114.090659.3703: AdminTME: AdminDataLink Running Task: TaskViewDeploymentReport
[21016] 140114.090659.3703: AdminTME: Status: TaskId = TaskViewDeploymentReport, RootTaskId = TaskViewDeploymentReport, Success: True, Warning: False, Continue: False, Message:
[8416] 140114.090700.5420: AdminTME: Committer: Completed called
[8416] 140114.090700.5420: AdminTME: Committer: Task was cancelled.
[8416] 140114.090700.5420: AdminTME: Committer: Committer Completed.
Now that I have been verified, I can include this screenshot, where you can see that I am expecting 4 computers to be listed in the pop-up window:
Any additional thoughts? In the meantime, I will be doing some searching on the new adminTME lines.

ESE 2007 on SBS 2008 following Exchange VSS error 9782 for each storage group

I have seen the following ongoing at customer site and have not had any luck resolving as yet. I need assistance troubleshooting this. This is SBS 2008.
Log: Application
Type: Error
Event: 2007
Agent Time: 2012-03-11 00:45:24Z
Event Time: 05:43:34 AM 03-Mar-2012 UTC
Source: ESE
Category: ShadowCopy
Username: N/A
Computer: server.organization.local
Description: Information Store (2936) Shadow copy instance 23 aborted.

and...
System
Provider
[ Name]
MSExchangeIS
EventID
9782
[ Qualifiers]
49193
Level
2
Task
41
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2012-03-11T05:34:57.000Z
EventRecordID
616963
Channel
Application
Computer
Server.organization.local
Security
EventData
548103f5-8c4f-4bd8-ae6e-42dd634e4bcd:17
First Storage Group
46756C6C00
Binary data:
In Words
0000: 6C6C7546 00
In Bytes
0000: 46 75 6C 6C 00 Full.

Outlook 2010 Will Not Connect to Exchange 2007 on SBS 2008 Server

Good Morning,
I have a user who cannot connect to the exchange server on SBS 2008 with outlook 2010. When they start outlook, it shows disconnected and will not connect for a minimum of 20 minutes to an hour. Any suggestions on how to fix this would be appreciated.
I have rebuilt their profile, but that does not fix the issue.
Thank you,
Lee F.
Lee Feldman SMB Consultant

Hi,
Thanks for posting in the forum.
Regarding the current issue, since you have recreated the user profile without any issue, I suspect that it’s mainly caused by the network issue. At this time, please first check the TCP/IP
configurations as Larry mentioned. Then, please also refer to the article below for details about how to troubleshoot Outlook connectivity issue.
Troubleshooting Microsoft Exchange: Outlook Connectivity Issues
http://blogs.technet.com/b/mspfe/archive/2011/04/12/troubleshooting_2d00_microsoft_2d00_exchange_2d00_outlook_2d00_connectivity_2d00_issues.aspx
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Configurations for WSUS on SBS 2008 & 2011

Similar Messages

Maybe you are looking for