Configurations of CHARM and What is SDMN ?

Hi Experts,
Thanx for your help to solve my previous issues.I am new to solution manager. Actually i am technical consultant.This is my first project in solution manager( CHARM). I completed below steps .
1.Copied SDCR to ZDCR and completd configuration . Working fine . Able to create follow up document(ZDHF).
2 Copeid SDHF to ZDHF . Completed other setting need for that .
But i am getting an error in ZDHF "No maintenance cycle is open for the current system'.
I read somewhere this is because of maintenance transaction -SDMN.
Do i need to link this SDMN or ZDMN to my ZDHF . What is the functinality of this ?
Not only to ZDHF , To ZDCR also do i need to link ZDMN?
Where do i need to do this settings in SPRO ?
Thanks in Advance ,
Vijay

Hi ,
Here i have new error.May be it is helpful to solve my issue.
I created ZDAD from ZDCR in status "New SR". Later i am changed status status to "in Progress" using action.
My document status changed to "In progress" but i am getting 2 errors .
1 No link to maintenance cycle. ( no long text available for this ).
2.No active task list exists in SAP Change Manager.
No active task list exists in SAP Change Manager
Message no. SOCM_ACTION_LOG014
Diagnosis
The task list was not created successfully in SAP Change Manager or the task list is not active. Possible causes:
1. You are not authorized to create a task list in SAP Change Manager.
2. You are not authorized to activate a task list in SAP Change Manager.
3. The system landscape in SAP Solution Manager has changed and the task list is obsolete.
4. The task list has been closed in SAP Change Manager.
System Response
The transaction is incorrect.
Procedure
If you have not yet made any changes, you can also cancel the transaction.
Procedure for System Administration
Check the task list and the related maintenance landscape in SAP Change Manager. Check the authorization profile for the current user in the SAP Change Manager system.
My seeting in SPRO for cations for status :
E0001     0     SET_BO_LINKS
E0001     1     9CREATE
E0002     0
E0002     3     SAVE_PARTNER
E0002     40     SET_BO_LINKS
E0004     0
E0004     5     SAVE_PARTNER
E0004     10     SET_PREDOC
E0009     0
E0009     10     SAVE_PARTNER
E0010     0
E0010     20     SET_PREDOC
E0011     0     SET_BO_LINKS
E0012     0     SET_BO_LINKS
Please help me on this .
Thanks , Vijay

Similar Messages

  • Can URL redirects be configured with XE and what is the HTTP Server

    I would like to be able to URL redirects. I'm running XE with Application Express 2.1.0.00.39.
    I want to be able to have a URL like www.schoolwebsite.com and when the user hits it - have it redirect to the Apex page for the application. I was thinking that I needed to use a redirect in the HTTP config file, and that XE used Oracle_HTTP and I could configure in that manner.
    But, I can't find an Apache directory.
    1. What HTTP server is used with XE and Application Express 2.1.0.00.39?
    2. Can I configure for this type of redirect?
    3. Do I need to install an HTTP server to accomplish this?
    Thanks,
    Stephen

    Hi Steven,
    search for "proxy" in this forum.
    It explains how to configure a plain Apache http server as a proxy to XE. Then you can use the default mechanisms to rewrite an url.
    Here is an example (save the file as XE.conf and store it in the Apache conf directory (file httpd.conf is there).
    The following instructions are valid for Apache2.
    # Activate the following modules in httpd.conf:
    #LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    #LoadModule proxy_http_module modules/mod_proxy_http.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    #LoadModule headers_module modules/mod_headers.so
    # include the XE configuration (this file XE.conf) in httpd.conf:
    #include "conf/XE.conf"
    # XE listener is buggy, thus downgrade to http 1.0
    SetEnv force-proxy-request-1.0 1
    RewriteEngine On
    RewriteLog "D:\Programme\Apache Group\Apache2\logs\rewrite.log"
    RewriteLogLevel 0
    ## Rewrite requests /apex, /i, /public, /sys to locally installed XE
    RewriteCond %{REQUEST_URI} /(([^/]+)(/.*)*)$
    RewriteCond %2 =apex [OR]
    RewriteCond %2 =i [OR]
    RewriteCond %2 =public [OR]
    RewriteCond %2 =sys
    RewriteRule ^/(.*) http://%{SERVER_NAME}:8080/%1 [P]
    ## Rewrite main page
      RewriteEngine On
      RewriteRule ^/$       http://%{SERVER_NAME}/apex/f?p=107:1 [R]
      RewriteRule ^/index.html$       http://%{SERVER_NAME}/apex/f?p=107:1 [R]
    ## Rewrite /app1
      RewriteRule ^/app1$      http://%{SERVER_NAME}/apex/f?p=107:1:0 [R=303]Regards,
    ~Dietmar.
    Edited by: Dietmar Aust on Oct 14, 2008 1:16 AM

  • Pre-requisites and steps to configure ChaRM and SDA

    HI ,
    We are implementing the Solman EHP1 with configuration of ChaRm and SDA , I need pre-requisite to configure ChaRm and SDA . Request your help on this .
    Thanks,
    Om

    hi,
    best way to start charm using this forum
    First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
    and other related links for charm scenarios are here on this wiki
    http://wiki.sdn.sap.com/wiki/display/SM/WeblogsrelatedtoSolutionManager check out the below topics
    Change Request Management scenario: Usual questions
    Change Request Management scenario: Working examples
    Change Request Management scenario: Working examples "Development without Release" phase
    Change Request Management scenario: Working examples "Development with Release" phase
    Change Request Management scenario: Working examples "Test" phase
    Change Request Management scenario: Working examples "Emergency Correction" phase
    Change Request Management scenario: Working examples "Go-Live" phase
    Change Request Management scenario: Working examples "Being Completed" and "Completed" phase
    Change Request Management scenario: Working examples Final Points and Appendix
    Thanks
    Jansi

  • Freight Material why it is required and what are the configuration?

    Hi experts,
    My clientsu2019 requirement is they want freight material to be configured in DIEN material type? I want to know why they want this and what are the steps to configure it apart from material master
    Plz need your help
    Thanks
    Krushna

    Hi experts Please need your help

  • ChaRm and CTS+ configuration

    Hello Experts,
    Can anyone forward ChaRm and CTS+ configuration document to me, I have received Business requirments and trying to configure the same. I would appreciate step by step configuration guide for both.
    Thanks in advance.
    Regards,
    Swapnil Lakhe
    lakhess<at>gmail

    Hi,
    Please find the below steps for Charm confirguration :
    1.SAP Solution Manager Implementation Guide  SAP Solution Manager  Basic Settings  SAP Solution Manager System  Activate Integration with Change Request Management
    Click on the Execute icon with the text Activate Integration with Change Request Management
    Double click the Activate Change Request Management and set up client
    It will show the following window type your Change Request Management Client Number
    Click on the Integration Solution Manager
    If you have different system for Change Request Management gives the RFC destination for that System.
    Click back button
    Double click on the Integration Change Request Management
    You have to maintain the following data here
    Column 1: Application: CHARM
    Column 2: + : W
    Column 3: RFC Destination:  NONE
    Column 4: + : CUST620
    Column 5: + : 1.0
    2.SAP Solution Manager Implementation Guide  SAP Solution Manager  Scenario-Specific Settings Change Request Management  Standard Configuration 
    General activities
    Click on the Execute button with the text u201CActivate BC Sets u201C
    It will take us to SCPR20 Transaction which is used to Activate the BC sets
    Select the BC set SOLMAN40_CHARM_BASICFUNC_001 ,  it is for solution manager version 4.0
    Click on the Activate Button
    Create a Request for Activating the BC Set
    Click Save button to assign with a TP .Other wise Create a new Transport Request (TP).
    In Overwrite Data Box, select the Overwrite data, and in Activation Mode box select Expert Mode Option , Click on OK Button to activate this BC set.
    3.SAP Solution Manager Implementation Guide  SAP Solution Manager  Scenario-Specific Settings Change Request Management  Standard Configuration 
    Transport Management System.
    In Order to do all the Settings under the Transport Management System do follow the steps.
    All the below settings has to be done in satellite system not solution manager
    1.     Define Transport Routes for System Landscape
    Go to Transaction STMS
    Choose Overview -> Systems.
      Double-click each system.
    The Display TMS Configuration: System <system ID> screen appears.
    Select the Transport Tool tab page.
    If the entry CTC does not appear in the Parameters column, enter it there, and then in the Value column, enter 1.
    Save your entries.
    Configure Transport Strategy
    Go to Stms Transaction
    Go to Menu Overview  Transport Route
    Doubt click on Each System . In the Transport strategy group box, select Single transports
    (since only Import Single and Import Project All are used).
    In the Quality assurance group box, deselect Delivery after confirmation
    1.     Choose Continue.
    Activate TMS Trusted Services
    Choose Overview -> Systems.
    Choose Goto -> Transport domain.
    In Management Tab
    In Security Options group box
    Click on Trusted Services Active
    Go to QA Approval Procedure
    You should not assign any QA approval system there
    Save your Entries
    Call Transaction STMS.
    Choose Overview  Systems. The system overview appears.
    Choose SAP System  Create  Domain link.
    The dialog box Request for Linking 2 Domains appears.
    Enter the system name, host name and system number of the domain controller you want to link to, and then confirm your entries.
    Your SAP System performs the following actions automatically:
    o     Generates the required RFC destinations.
    o     Sends the address data of the controller to the controller in the other domain.
    You can now see that you have requested the domain link to the other domain in the system overview.
    Click the Distribute and Activate TMS Configuration ICON on the Application Toolbar
    After that Go to SAP System  Check   Connection Test, transport directory and transport tool
    Check all once whether it is having inconsistency.
    4.Check Configuration of Transport Domain
    Log on to every domain controller that is connected to your transport landscape.
    Call transaction STMS
    Apart from the information "You are logged onto the domain controller", you should not be able to see other messages or warnings.
    Generate RFC Destinations to Client 000
    Call Transaction SMSY.
    Go To Landscape Components
    Go to your Satellite System
    Click on the Domain Controller System
    In the Right side Tab strip, Click on the Clients, Select 000 client Click on RFC generate Button
    Give the User name for Read Access and Change Manager
    Click the OK Button to Continue
    Add Import Authorization to Operator/Administrator
    Make sure that the operator and administrator users in client 000 of the target systems have the same name as their user in the Solution Manager   system.
    Assign import authorization to the operator and administrator users in client 000 of the target systems (SAP_CHANGEMAN_OPERATOR and SAP_CHANGEMAN_ADMIN roles).
    5.Set Project Assignment of Requests as Mandatory
    If you want to enable your change request project is mandatory while creating a request for workbench or customization object, follow the steps
    Go to Transaction
    /N/TMWFLOW/CMSCONF
    Select the Change Request Management System
    Double click on the Project Assignment column
    A new windows opened as follows
    In the Attribute Required for Requests Box , Select Mandatory on the Default for all clients List
    In the Client u2013Specific Setting Activate the tick mark of the Right side of the Table Control
    6.Change Transport Request Option
    Requirements
    u2022     Repository changes are permitted in the system where you want to change the transport request option. (If they are not, proceed as described in SAP Note 327351.)
    u2022     You do NOT use template projects.
    Go to Transaction SE38
    Enter the following Program   SAPLSCMA
    Click on the Display Button
    Click the Find icon and type the following keyword,
    G_ACTIVATE_CORRECTION_SYSTEM
    Click on the OK Button to search
    Using Modification, Edit the Program in Change Mode
    Delete the following lines ,
      message id sy-msgid type sy-msgty number sy-msgno
                    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    And Insert the following lines ,
      no_automatic_recording = 'X'.
    Call Transaction SCC4
    Select the Change Request Management Client and Click the Display ICON.
    Go to Transaction SE 11
    Enter the table SCMATREED
    Choose Display
    In Menu Click on Goto -> Indexes,
    Choose Yes in the dialog box, and enter the index name 001, and the following short description: Index for Node in SCMATREE.
    Maintain Number Ranges
    Go to Transaction SNRO
    Enter Object Name  /tmwflow/M
    Click on Number Range Button on the Application Toolbar
    Click on the Change Intervals Button
    For the new interval, enter 01, and use the F4 Help function to select a value for the From Number field.
    The system returns 000000001 to 999999999.
    Save the Entries
    Come to the SNRO First Screen again; follow the same procedure for the following objects
    /tmwflow/d and /tmwflow/v.
    SAP Solution Manager Implementation Guide  SAP Solution Manager  Scenario-Specific Settings Change Request Management  Extended Configuration  Schedule Manager
    ( Note in HLL  We have using the Standard SAP Variants )
    Create Customer-Specific Variant for Task Lists
    Click on the Execute button
    To Create a New Entries, Click on the Create New Entries Button
    Type the Variant Name in the Variant Column Starts with the name space of u2018Zu2019, and in the Description Column you can maintain the description
    Define Additional Tasks for Task Lists
    Create Customer-Specific Header and Footer Tasks
    Install Template Report
    For all the above Refer IMG Node, follow the Steps
    SAP Solution Manager Implementation Guide  SAP Solution Manager  Scenario-Specific Settings Change Request Management  Change Transaction
    Check Installation Activities
    Make sure that you have performed the iBase IMG acitivities before you proceed with the Change Transaction IMG activities: SAP Solution Manager -> Basic Settings -> SAP Solution Manager System -> Service Desk -> iBase.
    Check the all the following settings has been done .
    Initially Create and Assign the Component Systems as iBase Components
    Manually Create and Assign the Component Systems as iBase Components
    Assign Business Partners to iBase Components
    In the following Link all the Settings comes with BC Set.
    SAP Solution Manager Implementation Guide  SAP Solution Manager  Scenario-Specific Settings Change Request Management  Change Transaction
    USER Authorization
    Administrator
    SAP_CM_SMAN_ADMINISTRATOR
    Change Manager
    SAP_CM_SMAN_CHANGE_MANAGER
    IT Operator
    SAP_CM_SMAN_OPERATOR
    Developer
    SAP_SOCM_DEVELOPER
    Regards
    Sreedhar Reddy.A

  • Hi, i have sony vaio laptop that already has photoshop elements 12 installed once bought, now i am having a configuration error 12 and says that i need to uninstall and reinstall which i cant. what should i do? thanks!

    hi, i have sony vaio laptop that already has photoshop elements 12 installed once bought, now i am having a configuration error 12 and says that i need to uninstall and reinstall which i cant. what can i do without uninstalling?

    hi, i have sony vaio laptop that already has photoshop elements 12 installed once bought, now i am having a configuration error 12 and says that i need to uninstall and reinstall which i cant. what can i do without uninstalling?

  • Generic searches in Solman 7.1 Charm and Incident Management

    Hi,
    I would like to configure some GENERIC searches in the web UI for ChaRM
    and incident Managment.
    Something like:
    Show all my Incidents
    or
    Show all my Change Reqeust
    or
    Show all tickets where I am a Change Manager.
    Like it is possible in crm_dno_monitor or in the Workcenter.
    Afterwards I´d like to share that with the global Sharing tool.
    Does anyone know if that is possible?
    thanks and Best Regards

    Hi thanks for your answers,
    If I define a query in the workcenter, how do I get it usable in CRM WEB UI.
    In CRM WEB UI I can define a search which shows every Change for a specific BP, but that does´t help me if I want to share this query. I need something which shows for every users his/her Changes.
    I do not understand what you mean with 'How do I connect to CRM UI'. Via Internet Explorer.
    Thanks and Best Regards
    Alex

  • ChaRM: usage of ChaRM and none-Charm transport strategy

    Hi ChaRM-TMS Gurus!
    We have the following [SAP system landscape |http://www.file-upload.net/view-1086963/SDN_TMS_Ist_Soll.jpg.html] and would like to use ChaRM approach simultaneously.
    What are the minimal requirements concerning transport layers/routes, which settings should be changed?
    How much and which transport layer/routes does ChaRM need?
    a) 1 any new transport layer/route
    b) standard transport layer, transport layer "SAP" and others
    Should all the standard transport layer/routes from virtual systems to real QAS and PRD systems or can I start as follows:
    1) Leave the current TMS settings unchanged
    2) Activate the extended transport control
    Result: the current setting will be client specific and all the old transport requests will be moved to client specific transport routes
    3) change the transport strategy (from mass transport to single transport)
    3) Define new transport layer
    4) Define  new transport route for SAP objects from DEV to QAS
    and assign the transport layer from 3) (client specific)
    5) Define  new transport route ZXXX from DEV to QAS
    and assign the transport layer from 3) (client specific)
    6) Define the delivery transport route from QAS to PRD (client specific)
    7) activate and distribute the settings
    Thank you very much indeed!
    Thom

    Hi Martin,
    Solmaniacs' assumptions are correct. You can have as many source clients as you want.
    As long as
    - STMS configuration (transport routes, and domain links) are consistent
    - SMSY configuration (logical components are declared properly with assigning the right role types to systems/clients)
    - Project declaration are done correctly (so that from Solman solar_project_admin you can read the STMS as confiured in the distant STMS domain)
    - IMPORTANT: those configuration GO ALONG with each other !! (SMSY should nt contradict STMS for example...)
    The tasklist that is generated for each Solman project will be as follow
    - Node 1: Header Tasks (commun to all systems)
    - Node x: Corresponding to track x declared in Project (each Source System will have his own node with the corresponding track under)
    - Node x+1
    - Node ...
    - Last Node : Tasks for Tasklist closure - checks on scma consistancy and CTS projects closure
    So you'll always have n+2 nodes in your tasklist; n beeing the number of declared source (=dev) systems in project
    For each action launched from change docuemnts like creation of TR, release of TR or Retrofit (as Solmaniac said) you'll have an additional pop-up that will appears letting you choose the system you want to use for the action
    Hope its helpful
    Regards
    Khalil

  • ChaRM and BI Transports

    We have setup and configured ChaRM and started using it for an ECC Implementation Project and tested an ECC Maintenance Project.
    However, Per OSS Note 1115759 (and experiences!), we do not use import all functionality for our SAP BI environment.  
    With ChaRM, it seems import all (or at least import all for the project) is used for both the implementation project and normal corrections of the maintenance project.   We are not sure what to do for BI.
    Does anyone have experience/recommendations for ChaRM with BI Systems?
    Thanks!
    Christine

    Hello
    You should first fix the errors you get such as the missing consolidation system
    Please see thread [Re: No consolidation system found for SID in solman; or check the forum on the error message "'No consolidation system found for" and you will find relevant information.
    I would advise to update your SAP Solution Manager though to one of the latest available levels, there are a lot of fixes and enhancements to Charm (and also availability of quality gate management which gives some of the functionality of Charm but is more compact).
    Kind regards
    Tom

  • Configuration of charms

    Hi All,
    I am very new to Charms and i don't have any conceptual knowledge on Charms.
    1) I want to know if any change request is raised in any of the Landscape will it reflect in the solution manager where we configured the Charms.
    2) Steps required to configure Charms.
    Can anyone help me out in configuration of Charms.
    Thanks & Regards,
    Sreeram

    Hi Sreeram,
    There are already a lot of threads explaining us how to set up the CHARM functionality.
    Once you read the documentation then try to see what doubts you have. Studying the documentation and start planning from there is more important than the execution (execution then takes very less time than we anticipate). On top of that, you can test this functionality even without disturbing the live R/3 landscape before implementing the real scenario.
    First steps to work with Change Request Management scenario in SAP Solution Manager 7.0
    Thanks

  • How Do I Determine What WUDFHost.exe is Doing and What It's Associated With?

    Since around the time of the installation of Win 8.1 Update 1 I've had a couple of new WUDFHost.exe processes that run all the time.  Today I saw one of them accessing data on a backup volume, which I assume was some kind of maintenance
    activity - but I'm not sure.
    My question is this:
    How can I determine what these processes are doing, why they're here, and what they're associated with (i.e., what feature or device has caused them to be running).  I don't suspect them of causing a specific problem - my system's running fine
    - but I want to know why they're running.
    Process Explorer shows them to have been started by these two command lines:
    "C:\Windows\System32\WUDFHost.exe" -HostGUID:{193a1820-xxxx-xxxx-xxxx-be817523f6aa} -IoEventPortName:HostProcess-ae18c507-xxxx-xxxx-xxxx-ce7a84b73fb2 -SystemEventPortName:HostProcess-76f2d2b0-xxxx-xxxx-xxxx-25de41b0af65 -IoCancelEventPortName:HostProcess-52988628-xxxx-xxxx-xxxx-54018fc05bec
    -NonStateChangingEventPortName:HostProcess-c981e37e-xxxx-xxxx-xxxx-a8bd344c5791 -ServiceSID:S-1-5-80-dddddddddd-dddddddddd-dddddddddd-dddddddddd-ddddddddd -LifetimeId:8472fac1-xxxx-xxxx-xxxx-680353bbbc7f -DeviceGroupId:WpdFsGroup
    "C:\Windows\System32\WUDFHost.exe" -HostGUID:{193a1820-xxxx-xxxx-xxxx-be817523f6aa} -IoEventPortName:HostProcess-af2e6f5b-xxxx-xxxx-xxxx-39a9cc13f6d4 -SystemEventPortName:HostProcess-45e89330-xxxx-xxxx-xxxx-9e76811e37aa -IoCancelEventPortName:HostProcess-3007f65c-xxxx-xxxx-xxxx-c6cdd5617944
    -NonStateChangingEventPortName:HostProcess-efca4373-xxxx-xxxx-xxxx-cfc06fd83dee -ServiceSID:S-1-5-80-dddddddddd-dddddddddd-dddddddddd-dddddddddd-ddddddddd -LifetimeId:f4aa6ef0-xxxx-xxxx-xxxx-d16f4eefddb2 -DeviceGroupId:WudfDefaultDevicePool
    As you can see, their function isn't obvious from what's showing.
    What tools can I used to delve further into what these are and why they're here?
    Thanks for any help or wisdom you can offer.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

    seems to me that you're about to dive down a rabbit hole for this one..
    http://en.wikipedia.org/wiki/User_Mode_Driver_Framework
    http://msdn.microsoft.com/en-us/Library/Windows/Hardware/ff557565(v=vs.85).aspx
    http://blogs.msdn.com/b/iliast/archive/2009/06/09/umdf-debugging-videos.aspx
    might need to ask more in the driver dev forums?
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • ThreadOpt values - is it possible to set them and what are the ranges?

    Hi there,
    I have a problem on my TestStand 4.2 platform, with test step result, formed and received from called external sequences results. In my Main sequence, in Post-Expression I defined condition, according to which the "Step.Result.Status" is passed or failed, and it works. But the problem is that in Status Expression field there is following statement: "(Step.Result.Status == "Done" && (Step.TS.SData.ThreadOpt == 0 || Step.TS.SData.ThreadOpt == 3)) ? "Passed" : Step.Result.Status". After deep search in the user manual, I found that (Note from "Expression Tab - Step Properties Dialog Box"): "Certain types of steps, such as Numeric Limit Tests, Multiple Numeric Limit Tests, String Value Tests, Pass/Fail Tests, and Statement steps, reserve one or more of these expressions to perform operations specific to the type of step or a substep performs the operation. In these cases, you cannot use the expressions the step type reserves, which appear dimmed on the tab." 
    Now, my problem is that at this specific step I call to an external sequence, which returns results and it is correct, but if these results, compared to expected are not the same, my step in the main sequence fails. Which is OK. But when the final report is generated I see there "Number of Tests Failed: 0", which is not OK. Since I can't change the "Step.Result.Status == Done", which comes from the external sequence, I thought that may be there is a place to change the "Step.TS.SData.ThreadOpt" and this way to cause to main sequence to correctly report "Failed Tests <> 0"??? 
    Does anyone has an idea whether it is possible to set this the ThreadOpt value and what is the accepted range?
    Your feedbacks and inputs are highly appreciated.
    Stephan

    GSinMN wrote:
    Hello Doug,
      I didn't think I was modifying any hidden properties.  It's just configuring a sequence call step when you add it to the sequence.  The "Execution Options" are clearly shown in a dropdown menu on the Module tab.  I was just pointing out that this seems to be what sets the ThreadOpt variable.  
    GSinMN
    Maybe I misunderstood. When you said "My normal process is to set it to 1, but based on this info, it needs to be either set to None or Use Remote Computer if you want anything other than "Done" to be returned." I thought you meant that you were setting the property directly rather than setting your sequence call steps to "New Thread" with the combobox.
    -Doug

  • After installing the update I get this message on an app from facebook "502 Bad Gateway nginx" what is the issue and what do I need to do to solve the issue?

    after installing the update I get this message on an app from facebook "502 Bad Gateway
    nginx" what is the issue and what do I need to do to solve the issue?

    Hi there, harleygirl.
    A look around the internet and my previous knowledge indicates this is not an issue with firefox, but with how the server that the app is run on is incorrectly configured. To test this, please install an old version of firefox. You can download an older version from http://www.mozilla.org/en-US/firefox/all-older.html then try to visit the website again. Please let us know if it turns out that it works with version 3.6

  • I write digital port by 'DAQmx Configure Logging.vi​' and receive TDMS file with 8 boolean channels. How can I write to 1 integer channel?

    Hello!
    I want to write 1 digital port from PXI-6536 with streaming to TDMS file.
    I'm writing by 'DAQmx Configure Logging.vi' and become TDMS file with 8 boolean channels.
    How can I write to 1integer channel?
    Attachments:
    1.JPG ‏27 KB

    Hey Atrina,
    The actual data stored on disk is just the raw data (that is, a byte per sample in your case).  It's really just a matter of how that data is being represented in LabVIEW whenever you read back the TDMS file.
    I'm not sure if there is a better way to do this, but here is a way to accomplish what you're wanting:
    Read back the TDMS file as a digital waveform.  Then there's a conversion function in LabVIEW called DWDT Digital to Binary.  This function will convert that set of digital channels into the "port format" that you're wanting.  I've attached an example of what I mean.
    Note: When looking at this VI, there are a few things that the downgrade process did to the VI that I would not recommend for these TDMS files.  It added a 1.0 constant on the TDMS Open function, and it set "disable buffering" on the TDMS Open function to false; you can get rid of both of those constants.
    Message Edited by AndrewMc on 01-27-2010 11:21 AM
    Thanks,
    Andy McRorie
    NI R&D
    Attachments:
    digitalconvert.vi ‏13 KB

  • I need to understand better, what can be done with sync and what cannot

    i setup 2 windows boxes + 2 linux boxes to sync and got a mess in less than a day. apparently, i do not understand, what it does/should do, and what not.
    As one having done work in distributed environments, namely in database replication scenarios, i understand, there have to be limitations, especially, as all of my 4 boxes are running most of the time.
    next, i found, that copying profiles wouldnt have worked either, as the windows boxes (have to) use different add-ons/plugins compared to linux (like fireshot - to give a simple example - needed a replacement on linux). - So just moving profiles doesnt help. But the promise to catch open windows/tabs, history, and so forth doesnt seem to work either. Maybe TabMixPlus is killing the whole mechanism?
    I found very detailed documentation on where to click to get it all started, but nothing about the internals nor limitations, thus being very disappointed now to find sync actually NOT working at all.
    Furthermore, while setting up the whole thing, every machine had a "sync setting" as to how to use that one machine: initial distribution/sync/receiver only/and so forth. Does this only concern the initial setup? - I wasnt able to see this configuration option ever again to be able to change it after the initial setup had been done.
    So i obviously need to understand better... as to me it looks like some real messy replication scenario, with not all backends sharing the same tables. And apparently adding/removing add-ons needs to get replicated manually anyway.
    What time delay do i have to expect? When shall i use "Syncronize" manually? And so on...
    I mean: I trusted Mozilla solution more than any other one, but it doesnt seem to live up to my expectations.
    (sorry: i had to reenter the whole thing after my email address ran out)

    Ok then! Thanks for answering!  Can you still transfer music over? I can't even get that to work! I have set my nephews up with no problem..obviously not a sec generation... please help again!

Maybe you are looking for

  • How to attach documents in Forms 6i

    Dear All, Could you please help me in how to attach the documents to forms 6i. Documents like .. pdf,excel,word, etc.. Thanks, Ahmed

  • [SQL SERVER 2000] Generic table exporter

    Hello every body. First of all sorry for my bad english but I'm french ;-) My internship consits into making a generic table exporter (with a table list). Export into csv files. I have tried 2 solutions : 1 - Create a DTS with a Dynamic Properties Ta

  • Hi experts !!!!...Here's my problem

    In BDC.........while Recordingthe screen resolution for line items differs from system to system. .......how to make the coding fit for all the resolutions in case of BATCH INPUT METHOD ? ....As far as i know while using CALL TRANSACTION ...we can de

  • Is it bettter to download apps from your ipod rather than sync through computer

    when i sync app through my computer i always says backing up step 1 of 2 so will the problem stop if i use wifi and download apps from my ipod

  • Os 10.5.8 to Snow Lepoard

    I am running 10.5.8 on a Intel iMac and learned that I need to run 10.6.6 to use the Magic trackpad I just bought. Do I need to run 10.6 before I run 10.6.6 combo pack upgrade or can I just run the combo upgrade?