Configurator 3 export issue

I developed a panel, exported it into photoshop cs6 and it worked fine. I have a good grasp of the concept....the problem is that I saved the panel, reopened it in configurator to change something and now it will not export....I have tried everything including deleteing the folder in panels and re-exporting. HELP!!!!
Here is the error that I get.....

Hi,
On Mac, are you using as a Non-Administrator user to run Configurator?
Yes, this problem occurs under this situation.
Could you please use "File->Export as CS Extension" feature to export the panel as a "ZXP" file to anothe place like "Desktop", then double click the "ZXP' file to make Extension Manager to installed into the products.
This is a new feature in Configurator 3.
Exman can install the "zxp" file to both Photoshop 32 bit and 64 bit once a time .
And the exported "zxp" files can be submitted to "Adobe Exchange" easily.
Or if you want to use "File->Export panel", then just like what you have done, you need export it into another place and then copy the exported folder into "Plugins/panels" folder.
Thanks
Xiaoyan

Similar Messages

Configuration of Issue Management tables

Hello -
I am looking to configure the tables in Issue Management but I cannot seem to find them via the SPRO transaction.
Is there a guide on how to do the configuration for Issue Management?
Please let me know
Thanks!
Nadine

Please look at Note 1019583. In TA SOLMAN_ISSUE_MGMT there are also the usual Wed Dynpro ALV customizing possibilities (independent of Issue Management).

Bizzare export issue

Here is a very weird export issue. Windows XP.
Project is set at h264 1920x1080 mono audio 29.97 fps
I have 30 shots that make up the sequence. Each shot is exactly 90 frames. I exported each sequence at h264 1920x1080 with one channel of audio. The first shot exports just fine and is 5 MB. The second shot exports at 10 MB. The third is 15 MB, the tenth shot is 50MB. But the picture is still 90 frames for each shot. BUT, when I export without audio each exported file is just 5 MB. If I look at the properties of each clip the duration of the video and audio is just 90 frames. If I open one of these clips in QuickTime Pro and re-export it as source then the files size goes back to 5 MB; same video, same audio yet with the correct file size.
Anyone seen this before?
Is there a setting that could be incorrect?
-cablet

Weird, man. Not sure what might cause that.

Configuring Export to PDF and Report Printing

Greetings
using Apex 3.1,Oracle 10g Release 2 on Hp-Unix
i have got to Configure
Export to PDF and Report Printing
please mention Documents or Links for the Configuration
thanks a lot

Hello ahuja
I would start here...
[APEX Printing|http://www.oracle.com/technology/obe/apex/apex31nf/apex31rpt.htm]
Kind regards
Simon Gadd

Crystal JRC PDF Export Issue

We are experiencing a PDF export issue with Crystal JRC version 12.2.202. The PDF report shows 1 of 3 pages but ONLY the first page is generated. When this occurs, ALL other users that are exporting to PDF experience the same issue with any multiple page report. I can't find any errors in the log that would indicate what the problem is. To resolve the issue, I have to recycle the WebLogic application server that hosts the JRC, which would indicate something gets "locked" in memory and gets cleared when the app server is bounced.
Any ideas on how to resolve this ?

Hi Ted,
Thanks for the response!
Though, the mentioned Sun JVM Bug explains the root-cause, the Bug status also state that it is not fixed yet.
Also, we are reluctant to change the JVM Option to -Xint due to unknown impacts on JVM optimizations.
Is there a patch released for CrystalReports to deal with this behavior? We are using CRJ runtime 11.5.7.620 and seeking for a patch on this version.
Thanks.

PP CS5.5 FLV To MP4 Export Issues / Problems

I just upgraded from Production Premium CS5 to CS5.5. I do a fair amount of converting/exporting of imported FLV files (downloaded from internet news sites) to H.264/AAC w/ MP4 wrappers using Premiere Pro (PP) and Adobe Media Encoder (AME). My equipment is a 1+ yr. old HP Win 7 Pro w/ an Intel i970 Quadcore, 12 Gb RAM and MSI nVidia GTX 470 GPU. I have never experienced any queue or export issues w/ CS5 (at least that I noticed), but I am experiencing noticeably degraded queue export and direct export problems with these files in CS5.5.
Description: (1) The queue export times for the exact same imported FLV clip(s) using the exact same sequence settings and H.264/MP4 export settings are noticeably slower in CS5.5 (sometimes 2x, depending on the export settings, e.g. using maximum render quality) than in CS5; (2) My MSI Afterburner GPU monitoring software indicates 5-10% GPU usage during queue/export in CS5, while indicating 0% GPU usage (flatline) in CS5.5; and (3) When I attempt to direct export these files using CS5.5 I get the following error message: "The source and output audio channels are not compatible or a conversion does not exist."
I suspect that it may have something to do with "conforming" anomalies when the FLV file is imported into PP, but I would put that squarely in the category of rank speculation on my part.
Has anyone experienced the same or similar problems or have any insight into what may be the problem(s)? Of course, thanks for any help/insight you can provide.
Jim

What do you mean by a better routine?
A better compression routine than H.264.
Is the quality better than H.264?
Yes.
Does this use an MOV wrapper?
Yes.
Also, would it import correctly into PPro?
Yes.
we would import files into PPro exported out of FCP and would get a red pixelated glitch during preview and export. Does this codec solve this problem as well if it is an MOV wrapper?
I don't know anything about FCP.
Sorry for all the questions, just want to get things right before diving into a new codec.
It's harmless, and free.
Download it and run some tests.

Simple flash export issue

hello
I'm trying to export a flash video using Adobe media encoder from Premier Pro, but when I do I get this error " there are no clips to build".
I have another file that I am able to export and it does not have this problem.
They are Windows Media files and play in Premier fine. I am using Premier Pro CS3.
Lastly, I'm not a video expert but I really need to get these up on the web for work, there is a lot of pressure and I need to get it done.
Regards,
Tom

fixed the exporting issue.

Exporting ISSUES! Help

I am a relatively new user to lightroom. I haven't had any exporting issues until today. I am attempting to export a photo/photos to a specific folder with a custom name. When I do this it exports the WHOLE library and NOT the edited photo. What am I doing wrong??

Lightroom usually exports all images that are highlighted. If you only want to export one image then make sure it is the only image that is highlighted.

Exporting issues after 4.2 upgrade

Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

Are you using an Export preset, or setting the Export up manually each time?

Reporting Export Issue from Taleo

Can anyone help? We have a work around for the Exporting Issues into Excel 2010 regarding figures and dates only reading as text, however, a new issue has arisen. In one field we have Aggregated Agencies assigned to any particular Job Code. In the legacy reports, every agency name exported into one cell in Excel, now they export into individual rows, this causes a report to be too long and there is no way to amalgamate them into one cell. Has anyone found a workaround for this?

is there someway that it was reformatted by the Iomega drive being daisy chained to it?
No. That is not possible -anyway, reformatting erases everything on a drive.
You would have noticed that first.
You can download the [NTFS-3G driver|http://macntfs-3g.blogspot.com> which will let you read, write and even reformat the clients drive as NTFS on the Mac. All reasonably modern Windows PCs work with this disc format and you won't run into the file size limitations associated with FAT formatted drives.

Using 128bit key Blowfish and any export issues

Hi,
I want to use blowfish (symmetric key algorithm) in my product and which will be shipped outside US. Reading Sun's documentation I am bit confused and I am not sure if the jce package is going to be available outside the US.
Has anyone used the default available symmetric key algorithms in the JCE package (javax.crypto.*) and faced any export control issues ?
Please let me know.
Thanks
RT
Here is a sample code
String ks = "123456789123456";
kb = ks.getBytes();
SecretKeySpec key = new SecretKeySpec(kb,"blowfish");
Cipher cipher = Cipher.getInstance("blowfish");
// Initialisation of cipher object for Encryption.
cipher.init(Cipher.ENCRYPT_MODE, key);

1. the issue is rather an import issue for some countries, than an export issue for US as far as you use jre>=1.4 .
you can read the
'Downloading the "Unlimited Strength" Jurisdiction Policy Files'
section of
http://java.sun.com/products/jce/javase.html
2. The restricted (defualt) shipped version already covers Blowfish if you mind that.
3. I use Blowfish with restricted (default) version of JCE in applications deployed in europe and have not heard of customer complaining sofar: they are supposed to use webstart or jre1.5.

Web Service Connector Export Issue

Hi,
Version: Crystal Xcelsius Designer 4.5
I have a Crystal Xcelsius dashboard with a Web Service Connector component on it, as well as some graph components.
When I "Preview" the file, the display works fine and the graph is filled with data obtained through the Web Service Connector.
However, when I try to "Export" the file, either as .swf, .ppt, etc, there is no sign of the display refreshing, either on load or at intervals. I've tried clicking on the Connector button, but it doesn't appear to be connecting to the data source at all.
Any help or advice on how to get the exported display working would be appreciated.

Xcelsius creates the SWF file which is operated through the Flash Player. Therefore, it uses the security features of the Flash Player that you have installed on the browser. It is possible that this issue is Flash Security which is preventing access across a different domain.
This error occurs for one of the following reasons:
The domain name used in the URL in the web browser and the URL used in the web service configuration in Crystal Xcelsius are not the same.
Or, if the URL in the web browser uses the domain http://machine1 and the URL in the web service connector uses the domain http://machine1.companyname.com, the SWF refresh will not be successful.
When running inside a web browser, a Macromedia SWF file cannot access data that is outside the domain in which it was created. To work around this behavior, use a cross-domain policy file to allow the SWF file to access information on the Web Service server that is sitting on the other domain.
To use the cross-domain policy file:
1. Create a cross-domain policy file. For details on how to create this file, refer to technote tn_14213 at www.macromedia.com
2.Copy this file into the root of web application server. For example, for Tomcat, copy the file to 'drive':\Program Files\Business Objects\Tomcat\webapps\ROOT
For more information about the cross-domain policy file, see Macromedia technote tn_14213 at www.macromedia.com

SRM 5.0 Role export issue

Dear All,
I'm working on integration of SRM 5.0.1 and SIM 8.1.
I'm facing issues while exporting roles from SRM to SIM.
By the book i.e. SRM manual.
SRM Roles --> SIM Business Roles
SRM Policies --> SIM IT Roles.
But when I execute same scenario, following is the result.
1. SRM Roles --> SIM IT Roles.
2. SRM Policies export --> error: Policy export not supported for this version.
Kindly let me know if anybody has resoultion, also plz let me know if your are facing similar issues.
Thanks in advance.
Thanks and regards:
Amar Patil

Hi Amar,
I am new to SIM and SRM.I was trying to integrate SIM and SRM,I could test the configuration on SRM but I am not able to create the same on SIM.How do we get Sun Role Manager Web Services resource type from the drop-down list ?Any help would be greatly appreciated.
Thanks in advance
Uma

Migrating security from 11.1.1.3 to 11.1.2.2 and EIS Export issue in 11.1.2.2

Hello All,
We are currently using Hyperion 11.1.1.3 on Windows Server 2003 Ent. Edn. 32 bit.
Now we are planning to upgrade to 11.1.2.2 but we are doing a fresh install because we are upgrading OS also to 2008R2 Server 64 bit.
1. For Testing purpose we have installed and configured successfully on Windows Server 2008 R2 64bit.
For Security migration: I just exported security in 11.1.1.3 and imported to 11.1.2.2, migration status showing as "Failed"
But usres are migrated to 11.1.2.2.
Can you please let me know how to perfrom security migration from 11.1.1.3 to 11.1.2.2
Error
Error in migrating artifact, "/Native Directory/Users".
EPMCSS-02614: Failed to get user by identity native://nvid=911?USER. User not found. Verify Native user directory configuration.
Error in migrating artifact, "/Native Directory/Users".
EPMCSS-02614: Failed to get user by identity native://nvid=aa9322e19afe6bf1:-4bf27cb6:12ff20cff91:3cfa?USER. User not found. Verify Native user directory configuration.
Error in migrating artifact, "/Native Directory/Users".
EPMIE-00020: Failed to update user brobinson during import. Invalid identity for user. Please ensure that the user is available in the system with the identity specified in the import file.
2. Another known issue with EIS Import/Export option with 2008R2 64bit Server.
Can you please let me know is there any workaround for this?
Thanks,
Prathap

Have a read of the following support doc - "Migrating Native Users and Groups Via Lifecycle Management (LCM) Fails (Doc ID 1379619.1)"
For EIS you can install on 32bit OS and then you should be able to export/import, then you can point the 64bit to the relational db, alternatively it may be possible to point to the existing db as I doubt anything much has changed with the EIS database structure between those versions.
Cheers
John
http://john-goodwin.blogspot.com/

Premiere Pro CC + Multichannel Audio Export issues?

Currently I need to deliver 6 Channels of 5.1 audio mixed needs to be paralled with film and add Closed Caption and export as QT (Pro Res 422(HQ) with 6 Channels of Audio).
When I Try to export from Premiere Pro CC, I was asked combine 1+2, 3+4, 5+6 and when I export get 7 Channels with 3 stereo pairs.
Is it not possible to export 6 Channels only export as individual tracks along with Video in a QuickTime Export. Also have option only to select 5 or 7 Channels rather than my 6 channels why?
Attached screenshot for reference.

I know this thread is old but I figured I'd answer anyway if anyone comes across this post with the same question.
Premiere Pro will still export 6 uncompressed channels of audio when you select 5.1.
It doesn't bother giving you the option for a 6 channel QT file because it is the same as 5.1.
I had the same issue a while ago where I wanted to export a ProRes HQ file with 6 channels of audio but instead of 5.1, it was Lt-Rt (1-2), M&E (3-4), SOT (5-6). I just selected 5.1 when exporting then configure the channels as mono in Quicktime 7 Pro. Works perfectly.

Configurator 3 export issue

Similar Messages

Maybe you are looking for