Configurator 4 panel not updating in CC.
Something is screwed up in the way CSCC handles Configurator panels.
Converted a panel made for CS6 using Configurator4. Got it loaded into CC. It was not quite right so I made some minor changes. The changes never showed up in CC. Deleted the original folder under Panels, changed the name of the panel and reinstalled. Whoa! The original deleted panel was the only one that showed up under Extensions not the new one. This in spite of the fact that that folder no longer existied.
I have tried all sorts of maneauvers but the fact is that the original panel is the only one that PS recognizes even though it does not exist on the drive. It is locked into PS and nothing I have done will change it. The original panel was named 'Universal', the new one 'UniversalCC'. The Universal folder has been deleted under Panels and replaced by UniversalCC. It shows up in CC as Universal (which does not exist) and not UniversalCC.
Larry
This is the first time I have tried to use that process. I have the latest Java installed and I created a certificate. I tried the process a couple of times with the same results. Cannot kill the program from task manager or kill the process. Machine is locked and requires a reboot.
I have the certificate on my desktop and have since updated Java since the last try. Should I delete the certificate and try again. It is such a pain.
Larry
Similar Messages
-
Symbol Properties panel not updating or refreshing
Y'all,
I'm running FW CS5 under Windows 7 Pro (64-bit), and my Symbol Properties panel has stopped updating when I select a symbol to modify. I have to close and re-open the Symbol Properties panel to force it to refresh.
If I have the panel open and select a symbol on the page, the panel remains blank.
If I have edited a symbol then deselected it, that symbol's properties remain visible in the Symbol Properties panel after the symbol is deselected.
If I have edited a symbol then select another symbol, the first symbol's properties remain visible in the panel and it does not update to show the properties of the newly selected symbol.
In all cases I must close and re-open the Symbol properties panel to force it to refresh and update.
I've also noticed two other peculiar refresh problems lately - when the rulers are visible and I either zoom in / zoom out on the document or change the application window size, the top ruler often vanishes. I have to minimize then maximize the Fireworks application window to force a refresh and get the rulers to re-appear.
Finally, the little document info boxes at the lower right corner of the canvas showing document size and zoom level often go blank or vanish when I either zoom in / zoom out on the document or change the application window size. I have to minimize then maximize the Fireworks application window to force a refresh and get the info boxes to re-appear.
It seems that the problem may be related to some larger Fireworks screen refresh problem. It did not behave this way when first installed - it began happening recently, and the only thing that has changed was a minor update to all of the CS5 design tools (including FW) about the way that image metadata is handled.
Is anyone else experiencing odd refresh errors? Is it possible that an extension could cause this?
Any help and advice would be appreciated, because it has become really cumbersome to use component symbols.
Thanks,
DaveAfter digging around and looking at what has been updated or installed on my computer since these weird refresh problems began, I may have identified a possible cause.
Adobe installs the Java runtime with the Creative Suite (I'm not sure why, but it's there), and a few weeks ago the 1.6.20 update installed itself, but it failed multiple times before installing, then Windows 7 informed me that a component was improperly installed with the incorrect privileges. Last night the 1.6.21 update installed itself without any errors, and this morning Fireworks seems to be working normally again.
I'll keep monitoring FW for weird refresh problems, and if they return I'll post an update. It is possible that the 1.6.20 update broke something that was fixed by the 1.6.21 update.
Can anyone tell me why the CS programs require Java and what it is used for?
Thanks,
Dave -
C:\Program Files\Microsoft Configuration Manager\Logs not updating
Hi,
Anybody exprienced the scenario where logfiles in C:\Program Files\Microsoft Configuration Manager\Logs don't update anymore?
F.e. wsyncmgr.log is of beginning of April, no recent logs there except for 7 items: smsprov.smspxe, smsdpusage (date from Today).
Pls advise.
J.
Jan HoedtOpen ConfigMgr Service Manager and check the logging options (is logging for each component enabled at all? Is it really logging to the directory you examined?) You can also open the logs using notepad. cmtrace.exe sometimes does not display the entire
content if there are malformated lines.
Having installed ConfigMgr on the C:\ drive is not the best setup BTW.
Torsten Meringer | http://www.mssccmfaq.de -
Why does my Panel not update with the new picture?
Hi!
I call the folowing panel from my main Window where on certain events I want to get the panel to display a different image. The problem is that the initial image stays on.
import java.awt.*;
import java.awt.image.*;
public class Panel1 extends Panel {
Image thebkg1;//image to display
Panel1(Image ig){
thebkg1=ig;
}//end the constructor
public void paint(Graphics g)
g.drawImage(thebkg1,0,0,this);
}//end paint
public void update(Graphics g){
paint(g);
}//end update
public void dImg(Image po){
thebkg1=po;
repaint();
}//end dImg - gets called by the main Window in order to display a new image
}//end Panel1 class
Can somebody please let me know what is wrong with the code?
Thank youpublic void dImg(Image po){
thebkg1=po;
validate()
repaint();
} -
File names in project panel not updating in timeline...
Hey guys,
So I cut together a few scenes before I had named all the media in the project bin... But the new names are not reflecting in the timeline... is there someway to make this update and using the new name thats in the project pannel and the color label into the timeline???
Thanks for any help...If no one answers, it could just be that no one knows.
-
Update panel AsyncPostBack not update pannel
Hello, i'm create simple visual webpart, but update panel not update updatepanel1 if is using async callback. Response from button click:
http://pastebin.com/zWmPL4XB, if use PostBackTriger it work fine. ScriptManager.EnablePartialRendering="true"
<%@ Register Tagprefix="WebPartPages" Namespace="Microsoft.SharePoint.WebPartPages" Assembly="Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" %>
<%@ Control Language="C#" AutoEventWireup="true" CodeBehind="VisualWebPart1.ascx.cs" Inherits="VisualWebPartProject2.VisualWebPart1.VisualWebPart1" %>
<div>
<%--<asp:ScriptManagerProxy ID="ScriptManagerProxy1" runat="server"></asp:ScriptManagerProxy>--%>
<%--<asp:Timer ID="Timer1" runat="server" Interval="5000" OnTick="Timer1_Tick"></asp:Timer>--%>
<asp:label ID="Label2" runat="server" text="Label"></asp:label>
<asp:Button ID="Button1" runat="server" Text="Button" OnClick="Button1_Click"></asp:Button>
<asp:UpdatePanel ID="UpdatePanel1" runat="server" UpdateMode="Conditional" >
<Triggers>
<asp:AsyncPostBackTrigger ControlID="Button1" EventName="Click" />
</Triggers>
<ContentTemplate>
<asp:label ID="Label1" runat="server" text="Label"></asp:label>
</ContentTemplate>
</asp:UpdatePanel>
</div>Hi,
According to your description, you want to use UpdatePanel control in SharePoint visual web part.
We can invoke click event on Button by jQuery, the code like this:
<script src="http://code.jquery.com/jquery-1.11.1.min.js" type="text/javascript"></script>
<script type="text/javascript">
$(function () {
$("#Button1").click(function () {
console.log('clicked');
$("#<%=Button1.ClientID %>").click();
</script>
Reference:
http://stackoverflow.com/questions/17473892/partial-render-ajax-c-asp-net-visual-web-part
We can also use SharePoint JavaScript Object Model instead of UpdatePanel, more information is here:
http://social.msdn.microsoft.com/Forums/office/en-US/691affb9-eb6d-4777-b7fe-7d17bf1d98a5/updating-contents-in-a-custom-webpart-in-a-discussion-board-topic-page?forum=sharepointdevelopment
Best Regards
Dennis Guo
TechNet Community Support -
Hello Experts,
we are using SD_SALESDOCUMENT_CREATE function module to create sales order.
Sales order is creating successfully but the configuration for the items are not updating.
Could any one help me out on this ....we tried in different ways but couldn't ....
Here is the code....
*---Filling Configuration data
*--- Filling Configuration Reference Item / Instance
w_sales_cfgs_refinst-posex = w_items-itm_number.
w_sales_cfgs_refinst-config_id = '000001'.
w_sales_cfgs_refinst-inst_id = '00000001'.
APPEND w_sales_cfgs_refinst TO t_sales_cfgs_refinst.
CLEAR w_sales_cfgs_refinst.
*---Filling Configuration Reference Data SALES_CFGS_REF Table
w_sales_cfgs_ref-posex = w_items-itm_number.
w_sales_cfgs_ref-config_id = '000001'.
w_sales_cfgs_ref-sce = '1'.
w_sales_cfgs_ref-root_id = '00000001'.
w_sales_cfgs_ref-complete = 'T'.
w_sales_cfgs_ref-consistent = 'T'.
APPEND w_sales_cfgs_ref TO t_sales_cfgs_ref.
CLEAR w_sales_cfgs_ref.
*---Filling Configuration Instances SALES_CFGS_INST Table
w_sales_cfgs_inst-config_id = '000001'.
w_sales_cfgs_inst-inst_id = '00000001'.
w_sales_cfgs_inst-obj_type = 'MARA'.
w_sales_cfgs_inst-class_type = '001'.
w_sales_cfgs_inst-obj_key = w_sales_items_in-material.
w_sales_cfgs_inst-quantity = w_items-target_qty.
w_sales_cfgs_inst-quantity_unit = 'EA'.
w_sales_cfgs_inst-complete = 'T'.
w_sales_cfgs_inst-consistent = 'T'.
w_sales_cfgs_inst-OBJECT_GUID = 'T'.
w_sales_cfgs_inst-PERSIST_ID_TYPE = w_sales_items_in-material.
APPEND w_sales_cfgs_inst TO t_sales_cfgs_inst.
CLEAR w_sales_cfgs_inst.
*---Filling Configuration Characteristic Values SALES_CFGS_VALUE Table
LOOP AT w_items-itm_config INTO wa_itm_config.
w_sales_cfgs_value_in-config_id = '000001'.
w_sales_cfgs_value_in-inst_id = '00000001'.
w_sales_cfgs_value_in-charc = wa_itm_config-charc_name.
w_sales_cfgs_value_in-value = wa_itm_config-charc_value.
APPEND w_sales_cfgs_value_in TO t_sales_cfgs_value.
*---Filling Configuration Variant Condition Key SALES_CFGS_VK
w_sales_cfgs_vk-config_id = '000001'.
w_sales_cfgs_vk-inst_id = '00000001'.
w_sales_cfgs_vk-vkey = wa_itm_config-charc_name.
APPEND w_sales_cfgs_vk TO t_sales_cfgs_vk.
CLEAR : w_sales_cfgs_value_in,w_sales_cfgs_vk.
ENDLOOP.
Regards,
Harsha PHello All,
Actually there was a bug in my code to update configuration for an item in sales order
Below is my Updated Code with that i can updated configuration successfully....
*---Filling Configuration data
*---Filling Configuration Reference Data SALES_CFGS_REF Table
w_sales_cfgs_ref-posex = w_items-itm_number.
w_sales_cfgs_ref-config_id = '000001'.
w_sales_cfgs_ref-sce = '1'.
w_sales_cfgs_ref-root_id = '00000001'.
w_sales_cfgs_ref-complete = 'T'.
w_sales_cfgs_ref-consistent = 'T'.
APPEND w_sales_cfgs_ref TO t_sales_cfgs_ref.
CLEAR w_sales_cfgs_ref.
*---Filling Configuration Instances SALES_CFGS_INST Table
w_sales_cfgs_inst-config_id = '000001'.
w_sales_cfgs_inst-inst_id = '00000001'.
w_sales_cfgs_inst-obj_type = 'MARA'.
w_sales_cfgs_inst-class_type = '300'.
w_sales_cfgs_inst-obj_key = w_sales_items_in-material.
w_sales_cfgs_inst-quantity = w_items-target_qty.
w_sales_cfgs_inst-quantity_unit = 'EA'.
w_sales_cfgs_inst-complete = 'T'.
w_sales_cfgs_inst-consistent = 'T'.
w_sales_cfgs_inst-object_guid = w_sales_items_in-material.
w_sales_cfgs_inst-persist_id_type = 'G'.
APPEND w_sales_cfgs_inst TO t_sales_cfgs_inst.
CLEAR w_sales_cfgs_inst.
*---Filling Configuration Characteristic Values SALES_CFGS_VALUE Table
LOOP AT w_items-itm_config INTO wa_itm_config.
w_sales_cfgs_value_in-config_id = '000001'.
w_sales_cfgs_value_in-inst_id = '00000001'.
w_sales_cfgs_value_in-charc = wa_itm_config-charc_name.
w_sales_cfgs_value_in-value = wa_itm_config-charc_value.
APPEND w_sales_cfgs_value_in TO t_sales_cfgs_value.
*---Filling Configuration Variant Condition Key SALES_CFGS_VK
w_sales_cfgs_vk-config_id = '000001'.
w_sales_cfgs_vk-inst_id = '00000001'.
w_sales_cfgs_vk-vkey = wa_itm_config-charc_name.
APPEND w_sales_cfgs_vk TO t_sales_cfgs_vk.
CLEAR : w_sales_cfgs_value_in,w_sales_cfgs_vk.
ENDLOOP.
CLEAR : w_sales_items_in,wa_mara,w_items,w_sales_schedules_in,
w_items-itm_number.
ENDLOOP.
Cheers,
Harsha -
PARTY. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION.
Hi B2B gurus,
While validating our host trading partner, I am getting below error. Could you please help me in resolving this issue. Please do the needful.
We are using two versions of EDI
4010(5.0) and 5020(1.0) versions
An error occurred during validation.
Error -: AIP-11052: Writing following objects: Trading Partner failed due to following constraint violation: PARTY. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION.
Regards
SrinivasHi Srinivas,
Make sure there is no agreement in deployed state. Retire and purge all existing configurations and make sure there is no agreement in validated state.
Regards,
Anuj -
When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it. The iPhoto window opens up and reads the photos on the iPad, so it is connecting to the computer. Earlier today I wasn't having any problems. I have shut down the iPad and the computer and started over, but that didn't help. Any ideas on how to get the system to read the iPad so I can update the apps on it?
Hi, is the problem just to update your apps on your iPad? Here is what you should check. Is the iTunes on your computer updated to the latest version? Does your iPad needs to be updated? Do you have enough storage on your iPad to do the update? On your device is your iCloud back up checked?
Go to Settings - iCloud - Backup/Storage - see if its checked, and try unchecking it before connecting it to the computer.
Please let me know if you need any further assistance. -
Windows Could Not Update the Computer's Boot Configuration. Windows Server 2012
I am trying to install Windows Server 2012. When installing, I get the message Windows Could Not Update the Computer's Boot Configuration. Installation
cannot proceed. It cancel the installation. Can anyone help me with my problem?Hi,
Any update about the issue?
Please post more detail information about the issue?
How did your do the installation? clean install or override install?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Windows could not update the computer's boot configuration. via UEFI installation
I recently performed a clean WIndows 8.1 installation using my new Hard drive. However, under UEFI mode from BIOS, everytime the setup process reaches the "Installing Updates" stage, I kept on receiving an error "Windows could not update the
computer's boot configuration, Installation cancelled.
I was a bit puzzled as everytime I install Windows 8.1 via LEGACY mode from BIOS, setup finishes! I cannot tell whether I need to mod my BIOS or what.
please help.
raymund r
Hi,
Please make sure that Delete all partitions/volumes on the disk # (ex: Disk 0) that you want to install Windows 8.1 as UEFI on until that disk # shows as unallocated space.
Try again to install Windows 8.1 again.
If it still fails, please post back the setuperr.log and setupact.log under C:\$WINDOWS.~BT\Sources\Panther\ for our research. You can copy them out in WinPE command mode.
Also, I would like to check if you use bootcamp to install Windows 8.1 on Mac computer. If so, check the solution here:
https://discussions.apple.com/thread/5491283?tstart=0
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Kate Li
TechNet Community Support -
HELP!!!
Windows could not update the computer's boot configuration. Installation cannot proceed.
The installation then it says "The installation was canceled" and "Any changes to your computer won't be saved.
I have been trying to sort this out for over 15 hours.
I have the MacBook Pro (Late 2011)
Quad Core i7 (Clocked at 2.2GHz)
4GB Ram
Radeon Graphics (512mb graphics ram)
Running OSX Yosemite (10.10.2)Did you have to modify Bootcamp Inof.plist to see the USB Installer option?
Your USB device needs to be a USB2 device. Here is an example. -
I have set up iCloud control panel 3.1 for Windows 7 but when I add contacts on my Windows 7 desktop it is not updating to my iPhone 5 and the same holds true with my Calendar. Any suggestions? Thanks
The version that came with Microsoft Office Home and Business 2010 and says Version 14.0.7106.5003 (32 Bit) and the e-mail I have set up as POP / SMTP. Thanks for your reply.
-
Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.
Here is more information and hopefully a better explanation. My version of
LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits
done in the basic module. That means that I can correct exposure,
highlights, shadows etc. but once I go to another picture and returned to
the edited one the histogram (on the edited photo) and specifically the
clipping triangles are white or some other color. This is normally suppose
to indicate that some channel or all channels are clipped in the
highlight/shadow areas. If I adjust any slider in the Basic panel even as
little as one +/- value or press the J-key, the histogram will now show the
original edit. Moving on to another photo and then returning to to
previously edited one and again the edits are "not saved" and I have to hit
the J-key or adjust a slider to see the previously edited information
reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot
and return to it I cannot see from the clipping information whether the
original edit was correct and of course I might re-edit it (to some now
incorrect value). This brings up the second issue synchronization. I can't
rely on it because if I go back to fine tune a specific image in the batch
the triangles are white or some other color for that and every image. I have
to hit the J-key to show/hide clipping or the back slash key to see
before/after previews. This is the third issue which is very time consuming
and inefficient regarding my workflow. The forth issue is that I have
noticed that normally when an image is saved in PS, LR adds a copy of the
saved version to its catalogue. I have noticed that the PS to LR saves are
all wrong in terms of exposure (they are much lighter in tone) than the
original LR edit and the PS edit on my screen. If I check the PS to LR photo
in LR I notice that the Basic panel values have been changed and that I have
to sync the image with the originally edited RAW/NEF LR file to get it to
look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge
monitor to view my NEF files. I have reverted back to using LR 4 however I
am not sure if I should expect compatibility problems with Camera Raw 7.4 in
LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if
this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS
RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X
10.10.1
Hopefully someone else has noticed this problem. Any shared information
would be valuable. Thanks for the reply. -
I need to update a schema from Sharepoint with namespace
http://schenas.microsoft.com/office/2006/metada/contentType when i am opening a Word document. I am using VBA to do so. When i have made the Changes it does not update the DIP, not until i save the document.
Is there a way to update the dip using VBA.
/Ola
olhaHi,
This is the forum to discuss questions and feedback for Microsoft Office client. For any VBA related issues, I would suggest you to post in related MSDN forum -
Microsoft Office for Developers, to get better support experience:
https://social.msdn.microsoft.com/Forums/office/en-US/home?category=officedev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
Asset master creation (run time error)
Dear all I am facing problem with asset accounting at that time creation of asset master getting to run time error message Error message: GETWA_NOT_ASSIGNED Fields symbol not yet been assigned(segment 32770) Thanks & Regards suresh Edited by: prasa
-
Acrobat 6.0 Pro PDF Maker & CutePDF
Hi there, I have Acrobat 6.0 Professional installed on my computer (Windows XP). I recently had CutePDF installed on my system as well. Since this, my Acrobat PDF Maker will not create a PDF (from Excel 2002) as it used to. It freezes up part way thr
-
How to sort photo events by date and avoid having duplicated photos on iPhone 6+
How to sort photo events bby date and avoid having duplicated photos. Before the sorting by date worked perfectly by specifying "sort events by date ascending" in iPhoto from my Mac. Now the sorting from iPhoto has no more effect on the iPhones. And
-
Hi All! Is there a transaction code for mass blocking of GL account at company code level Quick reply will be highly appeciated. Thanks Jean
-
What do I do after trying to download Adobe Acrobat Pro XI seven times and getting message: setup interrupted?