Configurator error "can't fetch document"

We just rolled out 130 iPads in our school using Configurator and AirWatch.  Of course a day later I was asked to update some apps that we side loaded using Configurator.  Unfortunately when I plug in the iPads and hit "refresh device"  I get an error stating "can't fetch document", the details say:
This stops me from backing up the device or updating apps.  At this point I can't do anything. 
I tried removing all profiles but that didn't help.
I don't want to wipe the devices as the students just got them and have some documents saved already.
Has anyone seen this problem before?  Thanks for any help.
JP

Jason, thanks for the reply. I have not yet identified the offending App. I deployed a number of iPads, shortly after doing so I collected them to make a profile change. Almost 50% of them come up with the error just before the profiles are installed. It will update Apps, and the iOS, but you can't check in the device or apply new profiles. I suspect that for my iPads that updated in Configurator without an error, that the offending App had not yet been used. I've not yet had the time to delete Apps to find out which one might be the offender as the iPads had to go back into service right away.

Similar Messages

  • Error: can't fetch data for this host - too few bytes supplied by RPC

    Hi,
    In our internal Lab we have:
    One Admin, Media,Client Server (we can make backups for himself) - Solaris 10 with DDS4 tape drive (lab)
    One Windows Client (we can make backups) - Windows XP
    One Linux Client - CentOS 5.1
    When we add the linux client with the command:
    mkhost -a ob --inservice -r client -k 1024 linux
    We receive this message in the linux (host) /usr/tmp/observiced.log
    Error: can't fetch data for this host - too few bytes supplied by RPC partner (OB cached object manager)
    And in the obtool we receive (forever looping)
    Info: waiting for host to update certification status...
    Can you help us with this linux client error ? (iptables and selinux disabled!!)
    Thanks in Advance
    Serpins

    [SOLVED]
    Selinux not well removed....
    Thanks in Advance
    Serpins

  • Applescript "Finder got an error: Can't make document file"

    I can get the file contents if I use choose file but if I do it this way, I get the error:
    error "Finder got an error: Can’t make document file ... to file
    Code:
    tell application "Finder"
              set theFolder to (choose folder with prompt "Select the start folder")
              set file_list to every file of theFolder
              repeat with myfile in file_list
          log (name of myfile as string)
          set fileContents to read myfile
          set fileText to paragraphs of (fileContents)
          repeat with nextLine in fileText
              if length of nextLine is greater than 0 then
                  log nextLine
              end if
          end repeat
              end repeat
    end tell

    Changing
    set fileContents to read myfile
    to
    set fileContents to read (myfile as alias)
    sorted it!

  • Getting CoolType invalid font error 'can't fetch cmaps' for font MyriadPro–Regular when adding text box or text callout

    Just updated Acrobat X Pro on Mac to v10.1.10
    Now if I try to add a text box or a text callout (text box with arrow) I get a popup error saying "CoolType invalid font error 'can't fetch cmaps' for font MyriadPro–Regular"
    Any ideas much appreciated.

    Hi oscar18,
    This is usually caused due to corrupt/ invalid font libraries.
    On your Mac, open up 'Font Book' and follow the instructions below:
    Hit Cmd + A to select all fonts as shown above
    Click on File > Validate Fonts
    This will open up the Font Validator that will scan all your fonts and will notify you if there are any corrupt fonts. If you do see any corrupt font libraries, please remove/ delete those fonts from your computer. Then try opening Acrobat and check.
    Regards,
    Rave

  • Error: Can't fetch initial working directory at...

    Hello all,
    I was messing around using GRID control to fire off RMAN jobs...and I was doing a full backup, used as an level 0 incremental, but, after I fired it off...I found I'd forgotten to set the job to use the RMAN catalog...
    At the end of the run I got the following error:
    Recovery Manager complete.
    Can't fetch initial working directory at /u01/GRID/oracle/10.2.0/agent10g/perl/lib/5.8.3/File/Temp.pm line 858
    Can someone tell me what this means? I've done some googling but haven't found anything on this error...is the backup good or did it fail?
    Thanks
    cayenne

    You may want to check Bug #5649288
    The backup itself should still be OK, but you should check the log output in the Jobs link of Grid.

  • After Effects Error: can't fetch cmaps (iMac // Lion)

    Hi,
    since I have installed my Adobe Master Collection CS5.5 I can't open After Effects CS5.5.
    There pops up an Error message which says:
    I tried to reinstall the Applikation and also to reboot my System but it doesn't works.
    System Information:
      Modellname:
    iMac
      Modell-Identifizierung:
    iMac12,1
      Prozessortyp:
    Intel Core i5
      Prozessorgeschwindigkeit:
    2,7 GHz
      Anzahl der Prozessoren:
    1
      Gesamtanzahl der Kerne:
    4
      L2-Cache (pro Kern):
    256 KB
      L3-Cache:
    6 MB
      Speicher:
    4 GB
    AMD Radeon HD 6770M:
      Chipsatz-Modell:    AMD Radeon HD 6770M
      Typ:    GPU
      Bus:    PCIe
      VRAM (gesamt):    512 MB
      Hersteller:    ATI (0x1002)
    I would really appreciate if you could help me solve this issue
    Regards

    Repair your font caches/ remove possibly damged fonts.
    Mylenium

  • Enterprise Manager Configuration : error generated not in documents.need solution

    I have my database ( Oracle 7.3.2 ) on DEC-Alpha running OpenVMS 7.1 My enterprise manager is 1.2.2 . I created the repository but when trying to connect , the error that is generated is VOC - 00114 ( authentication supplied for a non-repository database cannot access the repository ) . I was trying to connect using a user with DBA privileges and had the repository created with the same user . This error also finds no mention in the documentation . I guess there is some compatibility issue but I am not too sure .
    Please help me

    Raj, I might recommend opening an iTar on Metalink to get a support rep to respond to this.
    Roger

  • Java.lang.SecurityException: Configuration Error

    Hello,
    Has anyone faced this exception before ?
    java.lang.SecurityException: Configuration Error:
    Can not specify multiple entries for initial
    at com.sun.security.auth.login.ConfigFile.getAppConfigurationEntry(ConfigFile.java:221)
    at javax.security.auth.login.LoginContext.init(LoginContext.java:172)
    at javax.security.auth.login.LoginContext.<init>(LoginContext.java:319)
    Thanks,
    Luiz Ernesto P. Mal�re

    We had similar errors occuring when multiple threads tried to login to our server at the same time. As it turns out, the com.sun.security.auth.login.ConfigFile class is not thread-safe. That is, if two threads try to login at the same time, we got this error.
    Try setting the login.configuration.provider in your security.properties to your own-thread safe class and see if it helps. It did for us.

  • Crystal window decoration configure error

    i'd run ./configure ant get this:
    checking for X... configure: error: Can't find X includes. Please check your installation and add the correct paths!
    any ideas?

    I made a PKGBUILD for this deco. It definitely could have been better, but it works, for me:
    pkgname=crystalgl
    pkgver=0.8.1
    pkgrel=1
    pkgdesc="Crystal-GL deco for KDE 3.2+"
    url="http://kde-look.org/content/show.php?content=18983"
    license="GPL"
    depends=('kdebase')
    source=($pkgname-$pkgver.tar.bz2)
    md5sums=()
    build() {
    cd $startdir/src/$pkgname-$pkgver
    ./configure --prefix=`kde-config --prefix`
    make || return 1
    make DESTDIR=$startdir/pkg install
    You'll have to download the tar.bz2 yourself. This is the OpenGL powered version, btw.

  • Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

    Morning Friends,
    I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
    I am using Sharepoint 2013 with Office 2013 
    I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
    When attempting to open / edit doc, receive error
    "We're sorry. We can't open <document name> because we found a problem with its contents"
    Details - No error detail available.
    Any info or advice would be greatly appreciated. 
    Very high level view of what I have done:
    1 - Created content type called "Letters"
    2 - Added site columns " First Name" and "Last Name"
    3 -  Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
    4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
    5 - Created a new document library called "Letters"
    6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
    7 - Then I clicked "Add from existing content types" and added the "Letters" content type
    8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
    9 - Created a new 2010 Site workflow called "Create a Letter"
    10 - To the workflow I added the action "Create List Item"
    11 - Configured the action to create Content Type ID "Letters" in the document library "Letter" 
    12 - For the "Path and Name" I gave it a basic name of "Letter to"
    13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
    14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
    15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
    16 - Saved - published and ran the work flow.
    17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
    18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe" 
    19 - Go to open / edit the Word document and receive the following error
    thoughts? Any info or advice would be greatly appreciated. 

    See this MS support article for SP2010 workflows and generating Word docs:
    https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
    "This behavior is by design. The Create
    List Item action in the SharePoint
    2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
    I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

  • Error while loading service Document Services Configuration (NW 7.0 SP13)

    Hello,
    I'm in the process of configuring the Adobe Document Services. Now I've received the Certificate + Credentials from SAP which I requested as described in Note 736902. I try to install them according to the Adobe Document Services Configuration Guide which I've downloaded from https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/90355269-4d89-2a10-0bb9-f388704f1dcd. [original link is broken] I've copied the pfx File to /usr/sap/<SAPSID>/SYS/global/AdobeDocumentServices/TrustManagerService/trust/credentials.
    Then I started Visual Administrator and opened Server <x> &#8594; Services &#8594; Document Services Configuration. Here I get this Error returned:
    Error while loading service Document Services Configuration
    com.sap.engine.services.adminadapter.exception.AdminException: com/adobe/ads/service/configuration/swing/CredentialTabUI
    Does anyone has a hint how I can resolve this problem?
    Regards
    Gregor

    Hello,
    I solved this problem by restarting J2EE and the Server.
    Regards
    Gregor

  • Finder got an error: Can't get item 1 of {document file "foo" ...}

    I have a lot of files in Corel Painter 8's RIFF format. I want to write a script that opens a file and somehow forces Corel Painter 8 to save the file as a GIF. GUI scripting may be some help with the latter; now I am concentrating on finding RIFF files and opening them in Corel Painter 8.
    I have a script that does a depth-first search of the folders starting at some root folder, using the Finder application to do the file-system stuff. It creates a list with
    set docs to every document file of pages_folder whose file type = "RIFF"
    as it loops through folders it adds to the list like this:
    set more_documents to every document file of a_folder whose file type = "RIFF"
    set docs to docs & more_documents
    My naîve mental model is that docs is a list of document-file objects. Next I have a loop that attempts to strip out files for which a GIF file already exists (and is no older than the RIFF document). This works by deleting non-matching items like so:
    if not isgifneeded then
    set docs to items 1 thru (i - 1) of docs & items (i + 1) thru (length of docs) of docs
    end if
    Finally it tries to open one of the files in Corel Painter 8 using the Finder:
    open item 1 of docs using "Corel Painter 8"
    This does not work. I get an error message
    Finder got an error: Can't get item 1 of {document file "bar" of folder "foo" of folder "blah" of folder "pdc" of folder "Users" of startup disk, ... }."
    It lists all of the files. (The error message appears in a sheet that extends off the bottom of the screen!) They are identified in the message as document-file objects. The curly braces are, I believe, the AppleScript notation for a list. I expect to be able to obtain the first element of a list with ‘item 1 of xs’. My assumption is that the Finder’s open command would expect a document file object, or at least would be able to cope with being asked to open a document. What am I missing here?
    PowerBook 12" without mini-DVI   Mac OS X (10.4.7)  

    Hi Damian and welcome to Apple Discussions!
    One suggestion: try
    tell application "Finder" to open item 1 of docs
    (without 'using "Corel Painter 8"')
    As far as the Finder is concerned, "Corel Painter 8" is just a string of characters. And telling the Finder to open a file is just the same as double-clicking it: the Finder knows which app to use - as long as these are native Corel Painter 8 docs.
    Hope this helps,
    H

  • I am getting error when hovering on document in sharepoint online "sorry there was a problem and we can't open this document.If this happens again, try opening the document in Microsoft Word"

     I am getting error when hovering on document in sharepoint online "sorry there was a problem and we can't open this document.If this happens again, try opening the document in Microsoft Word".I am sure that document is not corrupted and
    all. something it showing the preview and sometimes it throwing this error. I hope this error is intermident. When clicking on the link also it throws this error but on refreshing it working fine. I dont know why it is happening. Please helpme  to resolve
    this issue. 

    Hi Waqas
    Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
    Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
    Issue #3 in the above blog link does not reflect the same error I see on my servers.
    I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
    Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
    If you added domains to the Allow List by using the
    New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
    the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
    New-OfficeWebAppsHost cmdlet.
    I have not added any domains to the Allow list so this did not help either. Should I add the domain?
    Any further help with this is much appreciated.
    Thanks again.
    Yoshi

  • Conversion configuration error Unknown structure Header found in document

    Hi,
    we are having the following target structure according to that we need to generate a file.
    Output file sample format:
    ACODESXXXX0001581012011-03-2209.12.42WARRANTY CAUSE CODES FILE
    ACODESXXXX000158102CCCORROSION INSPECTION
    ACODESXXXX00015810255CAVITY, PINHOLE
    ACODESXXXX00015810256BAD MACHINING
    BCODESXXXX0001581012011-03-2209.12.42WARRANTY COMPLAINTS CODES FILE
    BCODESXXXX000158102NCNO CUSTOMER COMPLAINT
    BCODESXXXX000158102XPCONSIDERATION
    BCODESXXXX00015810299OTHER
    BCODESXXXX000158199000000131
    CCODESXXXX0001581012011-03-2209.12.42WARRANTY CIRCUMSTANCE CODES FILE
    CCODESXXXX000158102 BLANK
    CCODESXXXX000158102AAT ENGINE START
    CCODESXXXX000158102BWHEN WARMING-UP
    Target  Record Structure:
    DT_Codes
              Record
                        ACodes      
                               Header
                               Details
                               Trailer
                         Bcodes
                               Header
                               Details
                               Trailer
                         Ccodes
                               Header
                               Details
                               Trailer
                         TWRNTY
                               Header
                               Details
                               Trailer
    In receiver file adapter we have given following content conversion parameters
    Content conversion Parameters :
    Recordset Structure*: A_Code.Header,A_Code.Detail,A_Code.Trailer,B_Code.Header,B_Code.Detail,B_Code.Trailer,C_Code.Header,C_Code.Detail,C_Code.Trailer,
    Name                                                                                value
    A_Code.Header.filedFixedLengths               4,5,7,8,2,3,4
    A_Code.Detail.filedFixedLengths               4,5,2,8,9,3,2,7,8,9,3
    A_Code.Trailer.filedFixedLengths                  4,5,2,2,3,3,4
    B_Code.Header.filedFixedLengths               4,5,7,8,2,3,4
    B_Code.Detail.filedFixedLengths               4,5,2,8,9,3,2,7,8,9,10
    B_Code.Trailer.filedFixedLengths                  4,5,2,2,3,3,4
    C_Code.Header.filedFixedLengths               4,5,7,8,2,3,4
    C_Code.Detail.filedFixedLengths               4,5,2,8,9,3,2,7,8,9,10
    C_Code.Trailer.filedFixedLengths                  4,5,2,2,3,3,4
    Now we are getting error "Conversion configuration error Unknown structure Header found in document"
    Please suggest solution for the error.
    thank you,
    Praveen.

    your content conversion parameters seem to be wrong.
    Do refer;
    /people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion

  • I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

    I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

Maybe you are looking for