Configurator on more than one computer

HI All,
Im introducing iPads into mys schools. I just used my laptop to install all of the 4 schools ipads using configurator. How can I get my configurator from my laptop to be copied onto the teachers comptuers at the 4 schools?
Thanks.

If you've supervised the devices you can't
If you have a number of iOS devices you might  be better of using an mdm solution
You can lock wipe and erase remotely push settings to the devices without having to touch them
As long as the device is able to connect to the Internet

Similar Messages

  • Can't get internet on more than one computer!

    Hi--
    We recently changed internet providers, and now only one of our computers seems to be able to use the internet at a time. All of them show a full signal from the airport in the toolbar, and there does not seem to be any problem with the airport itself. So even though nothing seems to be wrong, we can't get more than one computer on the internet, a problem that never occurred before we switched our provider.
    I need to fix this, but am not sure where to begin, because I can't determine what the problem is. I'd appreciate any sort of clue as to where to begin.
    Thanks.

    JerryMc, Welcome to the discussion area!
    Is the AirPort Express (AX) the only router you have? If so, you need to make sure that it is configured to "share a single IP address".

  • Hardwiring more than one computer

    Just wondering if it's possible to have more than one computer wired via ethernet to an Airport Extreme Base Station. There's only one LAN port. Can it be shared for multiple hardwired connections?
    I have one wireless iBook and would like the other two Macs to be hardwired. Thanks for the help

    Yes, you can easily connect two or more computers to the LAN port of the Base Station with the use of a basic ethernet switch (NOT a router). A basic 4-port ethernet switch will cost around $30 at your local computer shop. At home, just cable the LAN port of the Base Station to one of the switch ports. Your two Macs each connect to other ports on the switch. You'll have one spare for future use. No additional configuration of the Base Station is necessary - it automatically shares the connection with all computers cabled to it.

  • Switched from DSL to cable modem. My Airport light won't turn green. Keeps blinking orange. No wireless now and can't connect to more than one computer! ?????

    Switched from DSL to cable modem. My Airport light won't turn green. Keeps blinking orange. No wireless now and can't connect to more than one computer! ?????

    Hmmmm.
    If you reset the AirPort Extreme by holding in the reset button for 9-10 seconds and then releasing, the AirPort should be back in default settings which would allow mutliple computers to connect to the LAN ports on the AirPort.
    Power off the cable modem for now and leave it off at least 15 minutes.
    With the AirPort Extreme still powered on, hold in the rest button on the back for 9-10 seconds and release. Allow a full minute for the AirPort Extreme to restart to a slow, blinking abmer light.
    Then, power off the AirPort Extreme.
    Check to make sure that the Ethernet cable from the modem is connected to the WAN "O" port on the AirPort Extreme.
    After the modem has been powered off for at least 15 minutes, power it up and let it run for 5 minutes by itself.
    Now, power up the AirPort Exteme and let it run for 2-3 minutes
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Connect an Ethernet cable from your Mac to one of the LAN <-> ports on the AirPort Express
    Click on the AirPort Exteme, then click Continue to follow the guided setup tp configure the AirPort Extreme.  You can use the same wireless network name, password, etc that you used before, or set up a new name and password, etc.

  • Can this be used on more than one computer?

    Can this be used on more than one computer?  (Multiple-users?)

    Hi Jessica,
    ExportPDF is for one user per account. Please refer to our terms... this should help with your questions!
    Let me know if this helps.
    Regards, Stacy

  • Can I install photoshop cs5 on more than one computer, if "owned" by a different user?

    I want to install my recently purchased photoshop cs5 on my macbook, as well as my imac. The only thing I worry about is that the macbook is in my name and the imac is technically in my dad's name, even though he only uses it to surf the web. The only reason he even bought the imac as opposed to anything else is so that I'd have a great place to edit photos. I really need it to be on both, will this work? Anyone have experience with this?

    This is what I was able to dig out
    May I use the software on more than one computer at a time?
    The activation process supports installation on two machines. The Adobe product license agreement allows the primary user to install the product on a primary computer and also on a home or laptop computer for his or her use, provided that the two copies are not used simultaneously. While the activation process supports installing and activating Adobe software on two machines, the usage of the product on the second computer is restricted to the user who licensed the software. Allowing others to use a second copy of the software violates the product license agreement.
    Doc on activating, deactivating http://kb2.adobe.com/cps/100/1008779.html

  • Can I load my Itune on more than one computer?

    Can I have ITunes installed on more than one computer, and sync with I-Phone and IPAD2?  How do I keep the files the same on both computers?

    you can authorize up to five computers you control for your iTunes store account.
    you can use home sharing to keep the libraries on them in sync.
    by design, iPhone and iPad can sync with only one library at a time.
    however, you could consider Managing content manually on iPhone, iPad, and iPod.
    also see Using iPad or iPod with multiple computers.

  • Can't use the iPod on more than one computer!!!!!!!

    Ok, This has got me so frustrated! We got an iPod and installed iTunes. We thought we had it figured out - we purchased music from iTunes, played it on the iPod and everything was great. Then plugged the iPod into my other computer to listen to our music and it won't freakin' play! says the computer is "Not Authorized" and suggests that by 'authorizing' the 2nd computer, it will overwrite the songs that are already on the iPod. This is NOT desirable. We've downloaded and installed iTunes onto the 2nd computer and used the same login account that we used on the first computer.
    What gives!?!?! I thought this was supposed to be easy, but it's not! I was hoping for a quick and simple "plug it in and start listening to music." This is definately not quick and simple. Albeit, I'm new to this iPod craze, but this shouldn't be so difficult. I've poked around on the website and cannot seem to find an answer to this.
    HELP!!!!
    Thanks
    oh btw, Is anyone else getting annoyed by Apple's rediculous attempt at monopolizing this market by forcing us to use thier own proprietary software?!?!

    First of all, any computer that plays purchased content must be authorized. This can be accomplished by opening iTunes, then store>authorize computer. If you wish to use your iPod on more than one computer & not have your iPod content erased, you will have to have your iPod preferences set on "manually manage". See the following link.
    http://docs.info.apple.com/article.html?artnum=61675
    Also, it's not only Apple that uses proprietary software. How about Zune players, & several others?
    Message was edited by: StarDeb55
    Message was edited by: StarDeb55

  • Can I install Design Standard on more than one computer?

    Can I install Design Standard on more than one computer?

    Yes, your license provides for installing and activating the software on two machines.  Any application within the suite can only be in use on one of the machines at any given time.

  • How can I use my iPod nano on more than one computer?

    How can I use my iPod nano on more than one computer?

    Hi, China6450.
    Thank you for visiting Apple Support Communities.
    I would recommend setting up Manually manage music.  This will only allow music to be synced from the computer to the iPod nano.  Here are some helpful articles that will walk you through the process. 
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/HT1535
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/HT1202
    Cheers,
    Jason H. 

  • Can I use my lightroom 5 CD on more than one computer? Toshiba to my new Mac Book Pro?

    I have Lightroom 5 CD that I've used for 2 years in my Toshiba laptop. I have a new Mac Book Pro and was wondering if I purchase an external CD for it, can I use my software on my new computer. I wasn't sure if it can be used on more than one computer...It doesn't say on the software box.
    Thank you so much!

    There are normally three options: License, buy or try. See image below.
    Did you double click on the package in downloads to start the installation?

  • Can I run my creative cloud for teams on more than one computer?

    Can I run my creative cloud for teams on more than one computer?

    Hi Nick,
    We would like to inform you that you can install and activate the subscription on 2 machines, however, you cannot use both of them at the same time.
    Kindly check the point 1.1 from the below mentioned link.
    http://wwwimages.adobe.com/content/dam/Adobe/en/legal/servicetou/Software_Terms-en_US-2015 0407_2200.pdf
    Thanks,
    Atul Saini

  • I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

    I assume these are POP accounts and all computers are set to remove from Server after downloading.
    So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
    Or get/setup IMAP accounts.

  • Playing a track on more than one computer

    Hi all,
    Does anyone know if it's possible to play an iTunes track on more than one computer (i.e., running iTunes) at a time? I have my main iTunes library downstairs, connected to an AirPort Express which is connected to my home surround system. While I'm playing a list through this setup, does anyone know if I can get another computer (Mac with iTunes 7.3)in my house to also be playing the tune at the same time (giving me the same music both upstairs and downstairs). I know I can play the track via a shared iTunes library (doing that now), but I want to have the track in synch as people move through the house. Any thoughts?
    Cheers,
    Bruce
    2GHz MacBook Pro, 2Gb RAM, 100GbHD & 800Mhz G4 iMac 512Mb   Mac OS X (10.4.10)   WinXP SP2

    Play thru speakers connected to the computer and the airport.

  • How can I synchronize safely from more than one computer?

    First, I have set up my iPod to work with two computers: my primary computer, which is my desktop at home. Later, I also "authorized" my laptop (as a secondary source) to also be able sync to my iPod.
    My question is that when I go to synchronize some podcasts I just downloaded to my secondary computer (my laptop), I get the following prompt: "Are you sure you want to sync podcasts? All existing podcsts on the iPod '<my iPod's name>' will be replaced with podcasts from your iTunes library."
    From this message, since my iPod is plugged into my laptop, I assume it's referring to my iTunes library on my laptop (which only has the few podcasts I just downloaded). And it sounds like it's going to delete the podcasts that are already on my iPod.
    I definitely don't want it to "replace" the ones I already have sync'd from my home computer; +_I just want to add the ones I have downloaded to my laptop._+ How can I make it so I can safely add the new ones without disturbing those I already have sync'd and want to keep? I'm a bit confused about how syncing works when you have more than one computer to sync to the iPod.

    You cannot do what you want.
    The ipod touch can sync with ONE computer/library at a time.
    When you sync to a different computer/library, the ipod touch will first delete the current itunes content form the iphone, then it will sync the content from the new computer.
    This is the way it is designed.

Maybe you are looking for

  • Using STORED PROCEDURE IN ORACLE FOR LOGIN AND UPDATES

    HI, I am trying to use oracle stored procedure to use it for LOGIN[AUTHENTICATION] purpose and also to update table values in the database. anyone has and idea as to how i can accomplish this . Please send in your replies. Thank you.

  • Encrypt - decrypt [ help ]

    this code is my chat aplet cryption modules. please make a DEBUG in .txt file or DDE command by mIRC thnx. encrypter modul. package conferenceroom; public class BCEB     private static String a(byte abyte0[], int i1, int j1)         j1 &= -2;        

  • 5.1 Update and AirPlay

    It seems the AppleTV will no longer send audio through the optical port when the TV is off. This is a real pain if it's true because I don't like having the TV on just to listen to music. Anyone else have this problem?

  • Reinstall Windows on raid array

    Hello all, I have 2 arrays running a 0+1 which windows in installed on and a raid 1 which my games are installed on. I originally built the array after windows was installed so I didnt have this issue.... I want to reinstall windows on the same array

  • Converting Array to ArrayList not working

    Dear Members : Following line fails to convert my array to arraylist: List myArrayList = Arrays.asList(myArray); bcoz when I do System.out.println("ArrayList: "+myArrayList); it returns [[I@3e25a5]. The array is just a standard array: int[] myArray.