Configure 1200 for Radius

Hello all! I am trying to configure the 1200 AP for radius auth to IAS 2003 server. according to the event viewer it says that the AP is trying to login as domainname/Guest. How do i correctly configure the AP to auth to the radius server?

Hi,
Got it, thanks.
AP config seems to be fine.
ON IAS, he reason why the user is the AP is that you do not set condition by which the user should be identified as belonging the a certain windows group, s as the client is not identified, only the AP is seen.
Why I don't clearly get is he criteria you try to set as condition, could you explain them please ? From what I see, you use virtual, which is typically smething I use to authentication ssh sessions, and ^311$ which says to process Access-Request messages sent by RADIUS clients that are computers running the Microsoft Routing and Remote Access service... a bit confusing for me... so can you explain what condition you try to set ?
Oh BTW, in you client config, the client vendor should be Cisco and not radius standard...
J

Similar Messages

  • ISG Debug - IP configuration missing for radius proxy session initiation

    Folks,
    We are trying to configure the ISG as a Radius-Proxy for EAP Authentication. I have configured aaa server radius proxy, clients and aaa auth radius-proxy group as per the guide. I have my interface config as follows:
    interface TenGigabitEthernet0/2/0.205
    encapsulation dot1Q 205
    ip vrf forwarding CS
    ip address 10.20.0.1 255.255.224.0
    ip helper-address global 172.X.X.X
    no ip redirects
    no ip proxy-arp
    ip tcp adjust-mss 1420
    service-policy type control DEFAULT_RULES
    ip subscriber l2-connected
      initiator dhcp
      initiator radius-proxy
      arp ignore local
    When I try to connect a wifi client to an AP, I can see that the AP is forwarding the Access-Request to the ISG but the ISG does not forward it to the AAA. In the ISG debug I see the following message:
    RADIUS: IP configuration missing for radius proxy session initiation
    Can any one help to identify what is missing here pls?
    Thank You in advance!

    Kiran,
    Did you follow this guide? It looks like the interface configuration is there but you didnt include the actual radius configuration does it follow the guide here -
    http://www.cisco.com/en/US/docs/ios/isg/configuration/guide/isg_radius_proxy.html#wp1055053
    Thanks,
    Tarik Admani

  • New command for radius-server source-ports

    I am trying to find the new command fro radius-server source-ports 1645-1646 since it appears to be depricated.  We use tacacs so we do not have the radius server specified but we do need to put in the ports.  Can someone please tell me the new command for radius-server source-ports?
    Thanks

    Both of the links that Peter posted are interesting and helpful. I would like to take a slightly different approach in answering your question.
    In every version of IOS there are certain commands that get inserted into running-config when a particular feature is activated. It looks like in your version the radius-server source-ports is one of those commands. I do not think it is anything that you should be concerned about.
    And I do not believe that having the radius-server source-ports command would prevent TACACS from working. I believe that there is likely to be some fault in your configuration. If you would post the aaa parts of the config then maybe we could see what the problem is.
    In my experience configuring aaa some of the common problems include not correctly identifying the TACACS server, not having exactly the same key configured on the Cisco device and the TACACS server, not having connectivity to the TACACS server (can the Cisco device ping the server, and can the server ping the device), or errors in the authentication or authorization prameters specified.
    Post some information and we will see what we can do.
    HTH
    Rick

  • How to configure number of RADIUS authentication attempts

    Hello,
    I'm looking for a way to configure the number of RADIUS authentication attempts on a Server 2012.
    The server has RRAS but uses an external server for RADIUS authentication. By default, the RRAS (RADIUS client) sever sends
    3 RADIUS Access-Request messages if there is no reponse from the RADIUS server. I would like to configure that to only
    1 authentication retry.
    I have tried to configure settings in the registry, but it did not help. I have configured:
    HKLM\SYSTEM\CurrentControlSet\Services\RemoteAccess\Authentication\Providers\{1AA7F83F-C7F5-11D0-A376-00C04FC9DA04}\Servers\radiusserver1 - the DWORD value
    Retries. Also, I have configured: HKLM\SYSTEM\CurrentControlSet\Services\RemoteAccess\Parameters - with a DWORD value
    AuthenticateRetries. Nothing worked.
    Is there a way to configure the number of RADIUS authentication attempts? Advice appreciated.

    Hi,
    According to your description, my understanding is that you want to change the retry times of RADIUS client.
    I set up a test environment according to your description:
    1. Windows 7 as the VPN client.
    2. Windows Server 2012 as VPN server, also install NPS as RADIUS client and forward request to RADIUS Server.
    3. Windows Server 2008 R2 as the RADIUS Server.
    I have tried to reduce the time of dropping the request, and some registry entry, but all have no effect  on 3 times retry of RADIUS access request. From now I haven’t found any Microsoft official instruction about this. I am wondering the reason you
    want to change this.
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Farm server for radius

    I am trying to use a server farm to get radius authentication/authorization and would like to get some comments. I have not found any related documentation in this case or at least using the CSM.
    Does the attached configuration take sense?
    I appreciated.
    Jose

    CSM does NOT have specific support for radius LB.
    The CSM can only support radius LB at L4, but there's no support for stickiness based on application-specific information.
    Simple Answer: yes you can do it, but you need to tackle it at layer 4.
    With loadbalancing radius, you also need to make sure that subsequent traffic should also hit the same radius server
    Your config should look like
    vlan 232 server
    ip address 172.22.9.4 255.255.255.0
    gateway 172.22.9.1
    alias 172.22.9.6 255.255.255.0!!
    !PROBES !
    probe RADIUS-ACT-PROBE udp
    interval 15
    retries 2
    failed 2
    port 1812
    probe RADIUS-AUTHE-PROBE udp
    interval 15
    retries 2
    failed 2
    port 1813
    !! serverfarm !
    serverfarm RADIUS
    nat server
    no nat client
    real 172.22.1.130
    inservice
    probe RADIUS-ACT-PROBE
    probe RADIUS-AUTHE-PROBE!!
    !! Sticky configuration!
    Sticky 19 netmask 255.255.255.255 address source
    ! Virtual servers !
    vserver RADIUS-ACT
    virtual 172.20.2.12 any
    sticky 30 group 19
    serverfarm RADIUS
    inservice
    Hope it helps
    Syed I Ahmed

  • Error trying to configure ADS for printing from BW reports

    hi all,
    i am trying to configure ADS for printing off reports from the BW portal. I am using BI 7.0 (BW Portal version 7.0 SP10) and am getting the following error i nthe default trace file.
    #1.5#00187177BCAA008D000000DD0000144C00043EE522456586#1195053750220#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/com.sap.prt.application.rfcframework#com.sap.ip.bi.base.exception.BIBaseRuntimeException#PASS.TEST#1678##BWD#PASS.TEST                       #B373727691C24C2FADD8534371BB536E#SAPEngine_Application_Thread[impl:3]_28##0#0#Fatal#1#/Applications/BI#Plain###Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:216)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:247)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0.processFunction(PRTRFCRemoteObjectImpl0.java:118)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy145.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156)
         at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
         at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405)
         at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728)
         at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
         at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
         at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
         at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:419)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.createExportResult(PageExport.java:157)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getPdfForPage(PageExport.java:166)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getExports(PageExport.java:183)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.processPage(PrecPageAssembler.java:271)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.run(PrecPageAssembler.java:195)
         at com.sap.ip.bi.broadcasting.runtime.impl.ProducerPrecalculation.produce(ProducerPrecalculation.java:415)
         at com.sap.ip.bi.broadcasting.runtime.RfcListenerRSRD_X_PRODUCE.handleRequest(RfcListenerRSRD_X_PRODUCE.java:130)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:181)
         ... 28 more
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         ... 42 more
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 44 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 46 more
    #1.5#00187177BCAA008D000000E00000144C00043EE522456FA1#1195053750220#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/com.sap.prt.application.rfcframework#com.sap.ip.bi.base.application.message.impl.MessageBase#PASS.TEST#1678##BWD#PASS.TEST                       #B373727691C24C2FADD8534371BB536E#SAPEngine_Application_Thread[impl:3]_28##0#0#Error#1#/Applications/BI#Plain###A message was generated:
    ERROR
    Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    com.sap.ip.bi.base.exception.BIBaseRuntimeException ERROR
    com.sap.ip.bi.base.exception.BIBaseRuntimeException
    Log ID: 00187177BCAA008D000000DD0000144C00043EE522456586
    Initial cause
    Message: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
    Stack trace: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.createExportResult(PageExport.java:157)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getPdfForPage(PageExport.java:166)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getExports(PageExport.java:183)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.processPage(PrecPageAssembler.java:271)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.run(PrecPageAssembler.java:195)
         at com.sap.ip.bi.broadcasting.runtime.impl.ProducerPrecalculation.produce(ProducerPrecalculation.java:415)
         at com.sap.ip.bi.broadcasting.runtime.RfcListenerRSRD_X_PRODUCE.handleRequest(RfcListenerRSRD_X_PRODUCE.java:130)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:181)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:247)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0.processFunction(PRTRFCRemoteObjectImpl0.java:118)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy145.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156)
         at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
         at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405)
         at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728)
         at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
         at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
         at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
         at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 46 more
    Message: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
    Stack trace: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Error: com.sap.ip.bi.base.exception.BIBaseRuntimeException
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:216)
         at com.sap.ip.bi.portalrfc.services.BIRfcService.handleRequest(BIRfcService.java:247)
         at com.sapportals.portal.prt.service.rfc.RFCEngineService.handleEvent(RFCEngineService.java:341)
         at com.sapportals.portal.prt.service.rfc.PRTRFCBean.processFunction(PRTRFCBean.java:37)
         at com.sapportals.portal.prt.service.rfc.PRTRFCRemoteObjectImpl0.processFunction(PRTRFCRemoteObjectImpl0.java:118)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
         at $Proxy145.processFunction(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:219)
         at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:169)
         at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java:156)
         at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
         at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java:2405)
         at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java:1728)
         at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
         at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
         at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
         at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:419)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.createExportResult(PageExport.java:157)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getPdfForPage(PageExport.java:166)
         at com.sap.ip.bi.webapplications.pageexport.broadcasterapi.PageExport.getExports(PageExport.java:183)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.processPage(PrecPageAssembler.java:271)
         at com.sap.ip.bi.broadcasting.runtime.impl.precalculation.PrecPageAssembler.run(PrecPageAssembler.java:195)
         at com.sap.ip.bi.broadcasting.runtime.impl.ProducerPrecalculation.produce(ProducerPrecalculation.java:415)
         at com.sap.ip.bi.broadcasting.runtime.RfcListenerRSRD_X_PRODUCE.handleRequest(RfcListenerRSRD_X_PRODUCE.java:130)
         at com.sap.ip.bi.portalrfc.dispatcher.services.BIServicesRfcDispatcherService.doHandleRequest(BIServicesRfcDispatcherService.java:181)
         ... 28 more
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         ... 42 more
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 44 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 46 more
    com.sap.ip.bi.base.exception.BIBaseRuntimeException ERROR
    com.sap.ip.bi.base.exception.BIBaseRuntimeException#
    #1.5#00187177BCAA0084000000120000144C00043EE523772516#1195053770252#com.sap.ip.bi.export.xfa.impl.PDFConverter#sap.com/irj#com.sap.ip.bi.export.xfa.impl.PDFConverter#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Error##Plain###EXPORT XFA calcTemplate=Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out#
    #1.5#00187177BCAA0084000000130000144C00043EE523772FEE#1195053770252#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/irj#com.sap.ip.bi.base.exception.BIBaseRuntimeException#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Error##Plain###Exception caught: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
    com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:403)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:97)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:217)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:2735)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:2478)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2432)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2054)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:931)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:873)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:324)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 51 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 53 more
    #1.5#00187177BCAA0084000000140000144C00043EE523773518#1195053770252#com.sap.ip.bi.base.exception.BIBaseRuntimeException#sap.com/irj#com.sap.ip.bi.base.exception.BIBaseRuntimeException#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Fatal#1#/Applications/BI#Plain###Exception thrown: com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: Unknown Error
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:419)
         at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
         at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:88)
         at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:569)
         at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:454)
         at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:368)
         at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:58)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:403)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:97)
         at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:217)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:2735)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:2478)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:2432)
         at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2054)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:931)
         at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:873)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:324)
         at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:21)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
         at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
         at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
         at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
         at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:405)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.createPDF(PDFObject.java:334)
         at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:413)
         ... 49 more
    Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
         java.net.SocketTimeoutException: Read timed out
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
         at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
         ... 51 more
    Caused by: java.net.SocketTimeoutException: Read timed out
         at java.net.SocketInputStream.socketRead0(Native Method)
         at java.net.SocketInputStream.read(SocketInputStream.java:129)
         at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
         at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.readLine(HTTPSocket.java:806)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getInputStream(HTTPSocket.java:341)
         at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getResponseCode(HTTPSocket.java:250)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getResponseCode(HTTPTransport.java:362)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:551)
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
         at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
         ... 53 more
    #1.5#00187177BCAA0084000000170000144C00043EE5237744D3#1195053770252#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/irj#com.sap.ip.bi.base.application.message.impl.MessageBase#PASS.TEST#1642##triombwd01.corp.net_BWD_9280250#PASS.TEST#45ddd21092c511dc9cbf00187177bcaa#SAPEngine_Application_Thread[impl:3]_58##0#0#Error#1#/Applications/BI#Plain###A message was generated:
    ERROR
    Error while generating PDF
    com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001
    Error while generating PDF
    com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode PageExportRenderingRootNode_0001#

    Hi Glenn,
    i faced the same problem
    did you solve yours meanwhile ?
    regards,
    Carsten

  • The boot configuration data for your Pc is missing or contains errors: error code 0x000014c

    Hello, 
    See if any body may help here... I get this blue screen:
    RECOVERY
    Your PC needs to be repaired: 
    The Boot Configuration Data for your PC is missing or contains errors.
    file:\\EFI\Microsoft\Boot\BCD
    Error code: 0xc000014c
    You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
    Press Esc for UEFI Firmware Settings
    First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
    F1 System Information
    F2 System Diagnostics
    F9 Boot Device Options
    F10 BIOS Setup
    F11 System Recovery
    ENTER - Continue Startup.
    this is what happen when I click any of this options:
    F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly) 
    so I can't do anything, nothing at all!! crazzines. 
    So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.  
    This is an:
    HP ENVY TS Sleekbook 4
    PRODUCT NUMBER  D1A99UA#ABA
    SYSTEM BOARD ID: 1894
    Bios F.25 
    **** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen. 
    Any idea of what should I do? 
    Thanks in advance.
    This question was solved.
    View Solution.

    If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
    Install a new hard disk and then boot to the recovery flashdrive.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Configuration documents for Training and event management &apprisals?

    hello xperts
    can anyone forward me configuration documents for treaining and event management and apprisal? to [email protected]

    Thanks for your suggestions.
    i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS.  appraisal has to done in the ECC only.
    Done the customization like this :
    created scales
    created appraisal model and assign the scales
    for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
    Now Appraiser (Manager) from APPCHANGE complete the appraisal.
    now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
    how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
    Please help in this requirement.
    Thanks and Best Regards,
    Praneeth kumar

  • How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

    I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
    I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
    Server 2008, and I'm running 2012.
    Any suggestions or tips on how I can begin testing this with Server 2012?

    Hi,
    You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
    If you need a sample .wcx file I have posted one here a couple of times.  If you want I will look for it and post a link.
    -TP
    I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work.  And I'm not sure what I would need to do with or how to create a .wcx file.
    When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to: 
    https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

  • How to configure mwi for GDM (general delivery mailbox)

    Hello everyone
    I'm trying to configure mwi for GDM and am not having much success. I tried a couple of different ways suggested in a discussion here:
    https://supportforums.cisco.com/message/3091135?tstart=0 but don't think I,m doing this the right way.
    This is what the thread states:
    x511 is a shared line with a corresponding GDM mailbox   (mine is x1007)
    x512 is a blast group with members x501 (phone A), x502 (phone B), and x503 (phone C)  *****I took 1008
    x511 is call forward all to 512
    The blast group at 512 forwards on no answer to voicemail
    x511 is assigned as a button on each of phones A, B & C
    When an incoming call comes in to x511 it is immediately forwarded to the blast group at 512, and as a result, x501, x502, and x503 ring.  After 15 seconds (or whatever the no answer timer is set to), the call goes to voicemail.  Because the call went to x511 first, it winds up in mailbox 511.  After the message is left, an MWI ON message is generated for x511, which results in the envelope icon being displayed next to the x511 button on each of phones A, B and C.
    Therefore If I change this to my configurations I think it would go like this:
    When an incoming call comes in to x1007(GDM) it is immediately forwarded to the blast group at 1008, and as a result, x1001, x1002, and x1003 and 1004 ring.  After 15 seconds (or whatever the no answer timer is set to), the call goes to voicemail.  Because the call went to x1007 first, it winds up in mailbox 1007.  After the message is left, an MWI ON message is generated for x1007, which results in the envelope icon being displayed next to the x1007 button on each of phones A, B and C.
    Here is what I tried:
    1: Configured GDM at extension 1007 and shared the extension to phones ext: 1001, 1002, 1003, 1004 (instead of above mentionned x511). This extension works and can retrieve GDM no problem.
    dial-peer voice 1007 voip
    description [-[ General Delivery Mailbox ]-]
    destination-pattern 1007
    session protocol sipv2
    session target ipv4:10.1.10.1
    dtmf-relay sip-notify
    codec g711ulaw
    no vad
    ephone-dn  8  dual-line
    number 1007 no-reg both
    label GeneralMail- x1007
    description General Mail
    name General Mailbox
    call-forward busy 1999                   *****Should call forward all to 1008 which is the hunt-group
    call-forward noan 1999 timeout 3    *****Should call forward all 1008. Therefore remove both commands and add the call-forward all 1008 (Correct???)
    hold-alert 30 originator
    2: Not sure what a blast group is but I believe it to be a parallel hunt group. Is this correct???
    ex: voice hunt-group 2 parallel (This will make all included phones dial at same time correct???)
          list 1001, 1002, 1003, 1004
    voice hunt-group 2 parallel
    list 1001,1002,1003,1004
    pilot ???  (not sure what to put here, i think it should be the pilot number 1008 correct???)
    pilot 1008
    Therefore this is what i got:
    voice hunt-group 2 parallel
    list 1001,1002,1003,1004
    pilot 1008
    Now I believe I need to create the dial-peer 1008 correct???
    dial-peer voice 1008 voip
    description [-[ Hunt Blast Group ]-]
    destination-pattern 1008
    session protocol sipv2
    session target ipv4:10.1.10.1
    dtmf-relay sip-notify
    codec g711ulaw
    no vad
    Next I think I have to create ephone-dn for the hunt blast group correct???
    ephone-dn  9  dual-line
    number 1008 no-reg both
    description General Mail
    name General Mailbox
    call-forward busy 1999                   *****Should call forward all to 1999 which is my voice mail correct???
    call-forward noan 1999 timeout 3    *****Should call forward all 1999 which is my voice mail correct ???
    hold-alert 30 originator
    Then last I would configure lines on the phones pointing to the ephone-dn 9 on all listed phones correct??? or am I totally lost?...lol
    ex: ephone  4
    device-security-mode none
    mac-address 0018.19B9.35BE
    username "operator" password 1234
    codec g729r8
    type 7961
    button  1:3 2:5 3:8 4:9  ***4:9 is the one correct???
    Any help will be greatly appreciated. Thanks very much.

    Thanks very much for the help Rob. This command does indeed take care of having my GDM
    light up but now if I try to send a message to the main phone line x1001 and leave a
    message it only has the enveloppe now and doesn't light up...lol
    It is a great command to know though...thanks a lot
    Any chance you know if I can have both the main line and the GDM light up when they receive messages in their respective extensions?
    ex:
    ephone 4
    device-security none
    mac-address aaaa.aaaa.aaaa
    username "operator"
    type 7961
    mwi-line 3   ****In my case this lights up the 1007 which is the GDM mailbox
    or
    mwi-line 1   ***now my main x will light up but not the GDM...lol
    button 1:3 2:5 3:8     ***Now for the personal mailbox
    ephone-dn  3  dual-line
    number 1003 no-reg primary
    label Operator-x1003
    description Operator
    name Sylvie Bombardier
    call-forward busy 1999
    call-forward noan 1999 timeout 10   ****worst comes to worst i'll get rid of the operator personal mailbox and call-forward all to GDM 1007 on that phone
    translation-profile incoming no-prefix
    Thanks very much again for your help. If you have any other ideas please feel free to add. I am definitely close to wrapping this issue. Funny cisco didn't configure GDM to also light up the phone extensions included in the GDM like the personal mailboxes when they receive messages.
    Thanks very much again for the help. I really appreciate it.

  • Remote Desktop Service Manager - configure permissions for Remote Desktop Users to Send Message, Disconnect, Logoff

    Hello, dear colleagues.
    We are using Windows Server 2012 R2 as Remote Desktop Server. Also use Windows Server 2008 R2 with Remote Desktop Service Manager to control RDS user sessions (Send Message, Disconnect, Logoff, Query Info). 
    Send Message, Disconnect, Logoff options works only for users in Administrators group.
    I can't to configure permissions for Remote Desktop Users, specific user or AD group. 
    To set permissions I'm running RDS Host Configuration on Windows Server 2008 R2 and connect to Windows Server 2012 R2. Then double-click
    RDP-Tcp, Security tab, add specific user account , AD group or configure
    advanced permissions
    for Remote Desktop Users.  
    But, as I sad above, these options works only for users in Administrators group. How to make it work for Remote Desktop Users or specific user, AD group?
    Thanks.
    P.S. If move specific user from Remote Desktop Users group to Administrators group on
    Windows Server 2012 R2 - it works. 

    Hi,
    You can prevent administrators from changing the permissions for a connection by applying the
    Do not allow local administrators to customize permissions Group Policy setting. 
    This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
    Apart there is one command with which you can set the permission for that check the related
    article. Additionally checkthis
    thread for more detail.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Configuring Maven for a new Project

    Could anyone provide inputs on how to configure Maven for a new project?
    I am referring to links
    http://maven.apache.org/guides/getting-started/index.html#How%20do%20I%20setup%20Maven?
    http://maven.apache.org/guides/mini/guide-creating-archetypes.html
    Rgds,
    seetesh

    We are introducing a new feature in Flex 2.0.1 that's due out
    early next year. The feature is called "Modules" and it was
    discussed at this year's MAX 2006. You can read more about it on
    Roger Gonzalez's blog:
    http://blogs.adobe.com/rgonzalez/
    - check the "Modular Applications" articles. I think this will go a
    long way to making the reusable parts you are talking about.
    Flex does not build things from instructions unless they are
    written in ActionScript. We have customers that do create dynamic
    interfaces based on data loaded from a database, so it is possible.
    But if you have pre-built templates and all you need to do is
    change certain aspects at runtime, it should be pretty easy with
    Flex. Take a look at the Flex documentation, especially the part
    about the Flex framework and how Flex sources are compiled into
    SWFs.
    You style Flex components using style sheets (CSS files).
    This also includes specifying skins for components if you decide to
    give something a whole new look.
    I'm a bit biased here, but I think using ColdFusion (version
    7.0.2) with Flex 2 is very easy. But it depends on your needs,
    budget, deployment, etc. WIth CF 7.0.2 and Flex Builder 2 you get
    wizards to be build both CFC (ColdFusion components) and matching
    ActionScript objects so that you exchange objects, not just data,
    between Flex and CF.
    WebServices can also be used (with CF, too). This gives you
    more choices to the backend. If you have a large amount of data or
    it is complex, consider Flex Data Services as that has data
    management capabilities.
    Flex 2 has localization capabilties. You create a 'resource
    bundle' in various languages and build SWFs for each one. When the
    end user choses their preference, take them to the page that loads
    the appropriate SWF.
    HTH

  • Error message while creating configurable material for variant configuration.

    Dear All,
    I want to create configurable material for the purpose of variant configuration. When trying to create configurable material using mm 01 or mm k1, it is displaying an error message that internal number assignment is not possible for the material type configurable materials as well in using external number also. Can anyone specify the steps to be done in creating the configurable material. Thank you all.
    Regards
    Akula Sivaji Kumar Madhu Kiran

    If you want to set these material type to another group (Which has a internal number and external number range), then you can do it.
    In MMNR, Click on the Edit Group.
    Then select the material type and click select element.
    Then mark a tick option in another group and then press Element/Group.
    Then you can see the material type will come under this group.
    Now save your entry, and create a material with this material type.

  • Configuration file for smart view for Hyperion planning

    Hi,
    We are using SmartView for accessing HyperionPlanning application. Please let me know how can we change the provider to use shared services and enable planning it for logging to file. Also which properties file is used for these configurations and where can we locate the configuration file on Hyperion planning installation system.
    Please suggest.
    Thanks
    Edited by: user11189447 on Aug 12, 2010 8:17 AM

    Hi,
    Checkout the below metalink from Oracle.
    Hyperion Strategic Finance Will Not Connect Via SmartView (Doc ID 1561484.1)
    Below Solution  as per doc ---
    1. Run the installation for the HSF Web Application component on the Foundation server where weblogic is for HSF Server.
    (Be sure the HSF Web Application component is also installed on the the HSF Server, if separate from the Foundation server as well.)
    2. Clean up any failed deployments in the WebLogic Console by deleting the HSFWeb Server from WL Admn
    3. Configure the new component on Foundation (target server).
    4. On OHS server run configtool and perform the WebServer config task to configure OHS for HSFweb
    5. Restart OHS and start HSFWeb
    Thanks,
    ~KKT~

  • Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

    Hi,
    I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
    I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
    I have followed the installation document & getting an error while configuring VMM for System Center 2012.
    error details from log file given below:
    01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
       at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
       at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
       at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
    01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
    01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
       at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
    01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
    01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item.  Setting rollback.
    01:12:24:SetProgressScreen: FinishMinorStep.
    01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
    I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
    An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
    I have checked that the following services are running:
    1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent)  3)SC VM Manager Agent  4)  Windows management instrumentation .
    I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
    Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
    thanks.
    ====

    Have you installed AppController on the same machine with VMM?

Maybe you are looking for