Configure 313 Q mvt type

Hi experts,
There is a requirement to move to stock in transit for Q stock (project).
Un restricted use stock can be moved via 313. But for special stock how can it be done ?
Has any body created a 313 Q ?
Pls advise.
Regds
J

Hi,
But I loose the track of the project stock. I do not want to move it back to un restricted.
I would like the project stock to move to stock in transit. then place in storage again the same project stock.
regards
J

Similar Messages

Mvt type 313 Q via delivery not allowed

Hi,
We have a scenario in our priject where the material (project stock) has to be moved from a srorage location to the customer site which again has been defined as a storage location. For this we have enabled the stoarge location to storage location transfer stock transport order functionality. Now when I create a new STO (sloc to sloc transfer) document type UB a new delivery type XYZ to which mvt type 313 has been assigned gets determined properly. Then I create an o/b dely using Txn VL10B.
The problem starts here. When I try to do the GI I get the following error:
Update control of movement type is incorrect (entry 313 X X Q L _ P)
Message no. M7226
Diagnosis
The system could not find entry 313 X X Q L _ P in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
This error is because of the mvt indicator L determined for which we do not have entry in update control in OMJJ. If I do this mvt 313Q and 315Q without a dely document it is allowed.
Is there any other way to work this out? Is there a way to add entry 313 X X Q L - P to OMJJ update control?
We need to have the delivery document as the material is crossing country borders when it moves from one sloc to the other.
Regards,
V S

313 is a manual movmement which does not even allow a Q special stock.
deliveries operate with automatic movements starting with a 6
641 Goods issue for a stock transport order (Shipping)
The quantity is transferred using a delivery in Shipping from unrestricted-use stock of the issuing plant to stock in transit of the receiving plant.
The goods receipt for the stock transport order takes place using movement type 101 and can, if required, refer to the purchase order or to the delivery. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movment type 671.
Possible special stock indicators:
E, Q
For the special stock indicators E and Q and for purchase orders assigned to an account, you must ensure that the quantity is not posted to the stock in transit of the receiving plant.

Mvt type configuration

Dear All
I have one problem with mvt type 344. I cann't transfer material stock from
unrestricted to Blocked storage type. I think this is configuration problem.
But movement type is available in MB1B,it does not work.How to configure this?
Thanks
Rajj

Hi,
Plz check in OMJJ tcode. Check all the settings (Dialog structure)
Reward if useful
Chandru

Mvt Type Text Table T156HT - How to configure?

Hi all,
There is a text table to support movement types - it's a general description table, unlike T156T. Seems like none of the Z* movement types created (copied from standard mvt types) has made an entry in this table during config.
Anyone know how to update this table?
Regards,
Mark

Hi,
It is suggested that you should not do any direct table entry.Always follow the transaction OMJJ to copy the std movement type to the customized movement type.
If it is not possible then you can follow the steps:
1. goto trnasaction SE11
2. Enter the table and press display
3.goto "Utilities"
4.Select"Table Content"
5.Select "Create entries"
This is not a process which should be used as a practice.
Cheers,
Satish Purandare

Abt MVt Types

<b></b> Hi Sapiens.
Hi ,
Can I get the documents that list of Movement Types .
Can u brief about when we wil do new mvt types , what are functional like when and where wil use it.
Explain me some busineess scenarios .
In Mvt , Is there Mvt not having rev. step.
Important things to study and do the Mvt Types in real time...
Regards
Skuamr

Hi
U can get the list from SPRO only using perform assistance..nyways here is the list i have copied from there.
second part to your query is answered few days back only in this forum..normally whenever we want some specific account to be hit against a movement type , we can create a new movement type.for better answer search this forum (key word new movement type).
Description of Movement Types
Below you will find a short description of the standard movement types. The reversal movement type is the movement type + 1 (reversal of 101 = 102).
101 Goods receipt for purchase order or order
If the purchase order or order has not been assigned to an account, a stock type (unrestricted-use stock, stock in quality inspection, blocked stock) can be entered during goods receipt.
If the purchase order or order has been assigned to an account, the goods receipt is not posted to the warehouse, but to consumption.
In the case of non-valuated materials, the goods receipt is posted to the warehouse, although the purchase order has not been assigned to an account.
Possible special stock indicators:
     K Goods receipt for purchase order to consignment stock
     O Goods receipt for purchase order to stock of material provided to vendor
     E GR for purchase order or order to sales order stock
     Q GR for purchase order or order to project stock.
Goods receipt for
subcontract order: at goods receipt, the consumption of the components is posted at the same time (see movement type 543)
Goods receipt for
stock transport order: at goods receipt the transported quantity is posted in the receiving plant from stock in transit into unrestricted-use stock (stock in quality inspection or blocked stock).
103 Goods receipt for purchase order into GR blocked stock
You cannot receive goods into goods receipt blocked stock for stock transport orders.
Possible special stock indicators:
K, O, E, Q
105 Release from GR blocked stock for purchase order
Movement type 105 has the same effects as 101.
Possible special stock indicators:
K, O, E, Q
121 Subsequent adjustment for subcontracting
This movement type cannot be entered manually.
With a subsequent adjustment for a subcontract order it is possible to correct the consumption of components. In this case, the material produced by the supplier is credited with the excess consumption / under-consumption. For this reason, if there is a subsequent adjustment, an item is generated for the produced material using movement movement type 121.
Movement type 121 does not have a reversal movement type.
Possible special stock indicators:
O, E, Q
122 Return delivery to supplier or to production
Using movement type 122, you can distinguish real return deliveries for a purchase order or order from cancellations (102).
In the standard version, you must enter a reason for the return delivery if you are using movement type 122. This enables you to carry out evaluations for return deliveries.
The effects of movement type 122 correspond to a cancellation of movement type 101.
Possible special stock indicators:
K, O, E, Q
123 Reversal of return delivery
If you returned a goods receipt using movement type 122, you can reverse the return delivery using movement type 123. This movement type has the same effects as movement type 101.
Possible special stock indicators:
K, O, E, Q
124 Return delivery to vendor from GR blocked stock
Using movement type 124, you can return a goods receipt to GR blocked stock ( 103).
Movement type 124 has the same effects as movement type 104.
Possible special stock indicators:
K, O, E, Q
125 Return delivery from GR blocked stock - reversal
If you returned a goods receipt to GR blocked stock using movement type 124 , you can reverse the return delivery using movement type 125.
Movement type 125 has the same effects as movement type 103.
Possible special stock indicators:
K, O, E, Q
131 Goods receipt for run schedule header
This movement type cannot be entered manually. It is generated automatically at notification of goods receipt for a run schedule header.
Possible special stock indicators:
E, Q
141 Goods receipt for subsequent adjustment for active ingredient
This movement type cannot be entered manually. It is generated automatically upon subsequent adjustment for a proportion/product unit . Subsequent adjustment is necessary if the system finds that there has been excess consumption or under-consumption after a goods receipt posting.
Possible special stock indicators:
K, O, E, Q
161 Return for purchase order
If a purchase order item is marked as a returns item, the returns to vendor are posted using movement type 161 when the goods receipt for purchase order ( 101) is posted.
Movement type 161 has the same effects as movement type 122.
Possible special stock indicators:
K, O, E, Q
201 Goods issue for a cost center
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
     K: Goods withdrawal from consignment stock
     P: Goods withdrawal from the pipeline
If you have withdrawals from consignment stock and from pipeline, payables to suppliers ensue.
221 Goods issue for a project
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
K, Q
231 Goods issue for a customer order (without Shipping)
You use this movement type if you want to process the delivery without Shipping.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
E, K, Q
241 Goods issue for an asset
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
K
251 Goods issue for sales (without customer order)
Use this movement type if you have not entered a customer order in SD. In the standard system, the movement is assigned to a cost center.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
K
261 Goods issue for an order
This refers to all withdrawals for orders (for example, DS:GLOS.3526C388AFAB52B9E10000009B38F974>production orders, maintenance orders), with the exception of customer orders.
Possible special stock indicators:
E, K, P, Q, W
The goods issue can be posted manually in Inventory Management or automatically when an order is confirmed or via a delivery in Shipping.
281 Goods issue for a
network
The goods can only be withdrawn from unrestricted-use stock.
The goods issue can also be posted via a delivery in Shipping.
Possible special stock indicators:
E, K, P, Q
291 Goods issue for any arbitrary account assignment
With this movement type, all account assignment fields are ready for input. You can assign the movement to any arbitrary account assignment object.
The goods can only be withdrawn from unrestricted-use stock.
Possible special stock indicators:
E, K, P, Q
301 Transfer posting plant to plant in one step
The quantity is transferred from unrestricted-use stock in the issuing plant to unrestricted-use stock in the receiving plant.
Possible special stock indicators:
E, O, Q, V, W
303 Transfer posting plant to plant in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing plant tostock in transfer in the receiving plant.
For technical reasons, you cannot carry out transfer postings from plant to plant in two steps for split valuation materials.
Removal from storage can be posted with movement type 603 via Shipping.
Possible special stock indicators:
None
305 Transfer posting plant to plant in two steps - placement in storage
The quantity is posted from stock in transfer to unrestricted-use stock in the receiving plant. The movement is not valuated.
You can use movement type 605 in Shipping to post the goods receipt with reference to the delivery.
Possible special stock indicators:
None
309 Transfer posting material to material
The quantity is posted from unrestricted-use stock of the issuing material into unrestricted-use stock in the receiving material.
Prerequisite: both materials have the same stockkeeping unit.
Possible special stock indicators:
E, O, Q, V, W
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators:
E, K, M, Q
See also 321, 343, 349, and 455 for other stock types
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
Possible special stock indicators:
None
315 Transfer posting storage location to storage location in two steps - placement in storage
In the receiving storage location, the quantity is transferred from the stock in transfer to the unrestricted-use stock.
Possible special stock indicators:
None
317 Creation of a structured material from constituent components (Retail)
A material split into its components using movement type 319 can be rejoined using movement type 317.
Movement type 317 has the same effect as a cancellation of movement type 319.
Possible special stock indicators:
None
319 Split structured material into components (Retail)
You can enter the splitting of a structured material manually using movement type 319.
You can configure Customizing so that a structured material (for example, aset, prepack, or display is automatically split into its components at goods receipt. The system posts the split using movement type 319. In this process, the BOM header material is posted and each of the component stocks are increased. You can also use this function if you use the Warehouse Management System (LE-WM).
Possible special stock indicators:
None
Example:
A box of the structured material S contains 3 pieces of the component K1 and 4 pieces of the component K2. The following material document items result after the material is split at goods receipt:
     Qty     Unit     Material     Movement type
     1     box     S     101 +
     1     box     S     319 -
     4     piece     K1     319 +
     5     piece     K2     319 +
321 Transfer posting stock in quality inspection - unrestricted-use stock
The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here you can post the quantity to another storage location.
You cannot use this movement type for QM-managed materials since transfer posting for these materials takes place via the usage decision.
Possible special stock indicators:
E, K, O, Q, V, W
323 Transfer posting storage location to storage location - stock in quality inspection
The quantity is transferred from stock in quality inspection in the issuing storage location into stock in quality inspection in the receiving storage location.
Possible special stock indicators:
E, K, Q
325 Transfer posting storage location to storage location - blocked stock
The quantity is transferred from blocked stock in the issuing storage location into blocked stock in the receiving storage location.
Possible special stock indicators:
E, K, Q
331 Withdrawal of sample from stock in quality inspection
The sample is destructive, that is, the withdrawal has the same effects asscrapping.
Possible special stock indicators:
E, K, Q, V, W
333 Withdrawal of sample from unrestricted-use stock
The sample is destructive, that is, the withdrawal has the same effects asscrapping.
Possible special stock indicators:
E, K, Q, V, W
335 Withdrawal of sample from blocked stock
The sample is destructive, that is, the withdrawal has the same effects asscrapping.
Possible special stock indicators:
E, K, Q
340 Revaluation of batch
Using this movement type, you can change a batch's valuation type. The system automatically calls up this movement type when you want to revaluate a batch by choosing Logistics -> Central Functions -> Batch Management -> Batch -> Change (transaction code MSC2N). There is no reversal movement type.
Possible special stock indicators:
E, Q
341 Change in status of a batch (available to unavailable)
This goods movement is automatically created when there is a change in thestatus of a batch and it is also used to transfer the unrestricted-use stock into restricted-use stock.
Possible special stock indicators:
E, K, M, O, Q, V, W
343 Transfer posting blocked stock - unrestricted-use stock
The quantity is transferred from blocked stock to unrestricted-use stock. You can also post the quantity to another storage location.
Possible special stock indicators:
E, K, Q
349 Transfer posting from blocked stock to stock in quality inspection
The quantity is transferred from blocked stock to stock in quality inspection. Here you can transfer the quantity to another storage location.
Possible special stock indicators:
E, K, Q
351 Goods issue for a stock transport order (without Shipping)
The quantity is transferred from unrestricted-use stock in the issuing plant tostock in transit in the receiving plant.
Movement type 351 is only used if the goods issue is posted without a delivery in Shipping. A goods issue for a stock transport order with delivery in Shipping is posted using movement types 641, 643, 645, or 647.
The transfer posting is also possible for materials with split valuation.
The goods issue for a stock transport order takes place using movement type 101.
Possible special stock indicators:
E, Q
For special stock indicators E and Q and for purchase orders assigned to an account, ensure that the quantity is not posted to the stock in transit in the receiving plant.
411 Transfer posting of special stocks E, K, and Q to company's own stock
The quantity is transferred from unrestricted-use special stock E (sales order stock), unrestricted-use stock K ( consignment stock) and unrestricted-use special stock Q (project stock) to unrestricted-use storage location stock. The corresponding special stock indicator is required for this movement.
If you do not use the special stock indicator, the system uses this movement type and movement type 311.
For sales order stock, you can change the material number for this movement if you manage the material in your company's own stock under a different material number (for example, for configurable materials).
Consignment stock is transferred to valuated stock, thus resulting in a vendor liability.
413 Transfer posting to sales order stock
You can use this movement type to carry out a transfer posting from your own unrestricted-use stock, other sales order stock, consignment stock, and project stock to a sales order stock.
Possible special stock indicators:
E, K, Q
415 Transfer posting to project stock
You can use this movement type to carry out a transfer posting from your own unrestricted-use stock, consignment stock, and other project stock to a project stock.
Possible special stock indicators:
E, K, Q
441 Transfer posting non-tied to tied empties
Part of the stock of an "empties" material assigned to a full product is managed in the stock type "tied empties".
Empties stock not assigned to a full product forms part of the stock type "unrestricted-use".
Using movement type 441, you can make a transfer posting for an empties material from the stock type "unrestricted-use" to the stock type "tied empties". Movement type 442 reverses this transaction.
Example:
The full product "beer" has a stock of 15 cases. Part of the empties components "bottle" and "case" is tied empties stock.
     Material     unrestricted-use     tied empties
     Beer     15
     Bottle     240     360
     case     10     15
451 Returns from customer (without Shipping)
Using movement type 451, you post customer returns without a returns delivery in Shipping into blocked stock returns.
Possible special stock indicators:
None
See also: 453, 651, 653
453 Transfer posting blocked stock returns to unrestricted-use stock
The quantity is transferred from blocked stock returns to unrestricted-use stock and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
Possible special stock indicators:
None
455 Transfer posting storage location to storage location - blocked stock returns
The quantity is transferred from blocked stock returns of the issuing storage location to blocked stock returns of the receiving storage location.
Possible special stock indicators:
None
457 Transfer posting blocked stock returns to quality inspection stock
The quantity is transferred from blocked stock returns to quality inspection stock and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
Possible special stock indicators:
None
459 Transfer posting blocked stock returns to blocked stock
The quantity is transferred from blocked stock returns to blocked stock and thereby transferred to valuated stock.
With this movement you can transfer the quantity to another storage location at the same time.
Possible special stock indicators:
None
501 Goods receipt without purchase order - unrestricted-use stock
This movement type is used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
For a goods receipt for purchase order (
101), the receipt of returnable transport packaging can be entered using movement type 501 and special stock indicator M.
Possible special stock indicators:
E, K, M, Q
503 Goods receipt without purchase order - stock in quality inspection
This movement type is used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
Possible special stock indicators:
E, K, Q
505 Goods receipt without purchase order - blocked stock
This movement type is used for deliveries from vendors that are not based on a purchase order. Invoice verification is not possible for these goods receipts.
Possible special stock indicators:
E, K, Q
511 Free-of-charge delivery from vendor
The quantity is posted to unrestricted-use stock. If there is a material with moving average price, the moving average price is reduced accordingly.
Possible special stock indicators:
None
521 Goods receipt without order - unrestricted-use stock
This movement type is used for deliveries from production that are not based on an order.
Possible special stock indicators:
E, Q
523 Goods receipt without order - stock in quality inspection
This movement type is used for deliveries from production that are not based on an order.
Possible special stock indicators:
E, Q
525 Goods receipt without order - blocked stock
This movement type is used for deliveries from production that are not based on an order.
Possible special stock indicators:
E, Q
531 Goods receipt from by-product from the order
The goods receipt of a by-product usually refers to an order, but it can be entered without a reference.
If a component is entered with a negative quantity in the order, a reservation item is created with 531 (instead of 261 ). The receipt of a by-product can be entered when the component for the order is withdrawn from stock or it can be entered as an 'other goods receipt'.
Possible special stock indicators:
E, Q
See also: 545 and 581
541 Transfer posting unrestricted-use stock - stock of material provided to vendor
With this movement type you provide the subcontractor with the components required for subcontract orders. The quantity is posted into unrestricted-use stock of material provided to vendor.
If there is a goods receipt for a subcontract order ( 101 ) consumption of components is posted from this stock.
The transfer posting can be posted via a delivery in Shipping.
Possible special stock indicators:
None
543 Consumption from stock of material provided to vendor
This movement cannot be entered manually.
The consumption of components for a subcontract order is posted using goods receipt for purchase order ( 101). It can be corrected by means of a subsequent adjustment.
For special stock indicators E and Q, you must ensure that the quantity is not posted to the stock of material provided to vendor, but to the unrestricted-use sales order or project stock.
Possible special stock indicators:
E, O, Q
545 Goods receipt from by-product from subcontracting
If a component is entered with a negative quantity for the subcontract order, the receipt of the by-product is posted to stock provided to vendor during goods receipt for purchase order or during the subsequent adjustment.
For special stock indicators E and Q, you must ensure that the quantity is not posted to the stock of material provided to vendor, but to the unrestricted-use sales order or project stock.
Possible special stock indicators:
E, O, Q
551 Scrapping from unrestricted-use stock
Possible special stock indicators:
E, K, O, Q, V, W
553 Scrapping from stock in quality inspection
Possible special stock indicators:
E, K, O, Q, V, W
555 Scrapping from blocked stock
Possible special stock indicators:
E, K, Q
561 Initial entry of stock - unrestricted-use stock
During
initial entry of stock balances, when the R/3 system is active, you enter the physical warehouse stock figures or the book inventory from your old system into the R/3 Materials Management component. This data entry usually takes place by means of batch input.
Possible special stock indicators:
E, K, M, O, Q, V, W
563 Initial entry of stock - quality inspection
During
initial entry of stock balances, when the R/3 system is active, you enter the physical warehouse stock figures or the book inventory from your old system into the R/3 Materials Management component. This data entry usually takes place by means of batch input.
Possible special stock indicators:
E, K, O, Q, V, W
565 Initial entry of stock - blocked stock
During
initial entry of stock balances, when the R/3 system is active, you enter the physical warehouse stock figures or the book inventory from your old system into the R/3 Materials Management component. This data entry usually takes place by means of batch input.
Possible special stock indicators:
E, K, Q
571 Goods receipt for assembly order to unrestricted-use
This movement cannot be entered in Inventory Management. It can only be entered in repetitive manufacturing using the Goods receipt for sales order function.
Possible special stock indicators:
E, Q
573 Goods receipt for assembly order to quality inspection
This movement cannot be entered in Inventory Management. It can only be entered in repetitive manufacturing using the Goods receipt for sales order function.
Possible special stock indicators:
E, Q
575 Goods receipt for assembly order to blocked stock
This movement cannot be entered in Inventory Management. It can only be entered in repetitive manufacturing using the Goods receipt for sales order function.
Possible special stock indicators:
E, Q
581 Goods receipt of a by-product from the network
The goods receipt of a by-product usually refers to anetwork, but can be entered without reference.
If a component is entered with a negative quantity in the network, a reservation is created with 581 (instead of 281 ). The receipt of a by-product can be entered during the withdrawal for the network or as an 'other goods receipt'.
Possible special stock indicators:
E, Q
601 Goods issue for delivery (Shipping)
In Shipping, this movement type is created automatically with the Goods issue for delivery function.
The quantity is taken from unrestricted-use stock.
Possible special stock indicators:
E, K, Q
603 Goods issue for stock transport order (Shipping) with additional
item
If you issue goods for a stock transport order in Shipping using movement type 641, you can use this movement type to assign an extra item to the order.
The ordered material is transferred to the stock in transit of the receiving plant. The material for the additional item is transferred from unrestricted-use stock in the issuing plant to stock in transfer in the receiving plant.
You can also use this movement type without referencing a purchase order.
Possible special stock indicators:
None
See also: 303, 641
605 Goods receipt for a stock transport order (Shipping) with
additional item
You can use this movement type to transfer into unrestricted-use stock the material you posted into stock in transfer in the receiving plant using movement type 603. You post the goods movement with reference to the purchase order (if available) or the delivery.
Possible special stock indicators:
None
See also: 305 and 641
621 Transfer posting unrestricted-use - returnable packaging (Shipping)
The quantity is transferred from unrestricted-use stock to the returnable packaging stock at customer.
Possible special stock indicators:
none
623 Goods issue from returnable packaging stock at customer (Shipping)
This quantity is withdrawn from unrestricted-use returnable packaging stock at the customer.
Possible special stock indicators:
V
631 Transfer posting unrestricted use - customer consignment stock (Shipping)
The quantity is transferred from unrestricted-use stock to consignment stock at customer.
Possible special stock indicators:
E, Q
633 Goods issue from customer consignment (Shipping)
The quantity is withdrawn from unrestricted-use consignment stock at the customer.
Possible special stock indicators:
W
641 Goods issue for a stock transport order (Shipping)
The quantity is transferred using a delivery in Shipping from unrestricted-use stock of the issuing plant to stock in transit of the receiving plant.
The goods receipt for the stock transport order takes place using movement type 101 and can, if required, refer to the purchase order or to the delivery. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movment type 671.
Possible special stock indicators:
E, Q
For the special stock indicators E and Q and for purchase orders assigned to an account, you must ensure that the quantity is not posted to the stock in transit of the receiving plant.
See also: 351, 643, 671
643 Goods issue for a cross-company
stock transport order (Shipping)
It is used only for cross-company stock transport orders with SD billing and invoice. The quantity is withdrawn from the unrestricted-use stock of the issuing plant. No stock in transit is created here. In the second step, the goods receipt must be entered in the receiving plant. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movment type 673.
Possible special stock indicators:
E
See also: 351, 641, 673
645 Goods issue for a cross-company
stock transport order in one step (Shipping)
Unlike movement type 643 when a goods issue is posted using movement type 645, a goods receipt line is generated automatically 101). If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movment type 675.
Possible special stock indicators:
E
See also: 675
647 Goods issue for a stock transport order in one step
(Shipping)
Unlike movement type 641 when a goods issue is posted using movement type 647, a goods receipt line (movement type 101) is generated automatically in the receiving plant. If a purchase order item is flagged as a returns item in the stock transport order, you can post the goods receipt of the returns in the issuing plant with movement type 677.
Possible special stock indicators:
E, Q
See also: 677
651 Returns from customer (Shipping)
Using movement type 651, you post returns from a customer with a return delivery in Shipping to blocked stock returns.
Possible special stock indicators:
None
See also: 451, 453, 653
653 Returns from customer (Shipping) to unrestricted-use stock
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators:
E
See also: 451, 453, 651
655 Returns from customer (Shipping) to stock in quality inspection
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators:
E
See also: 451, 453, 651
657 Returns from customer (Shipping) to blocked stock
With this movement type you post returns from the customer with returns delivery via Shipping directly to the valuated stock.
Possible special stock indicators:
E
See also: 451, 453, 651
661 Returns to vendor via Shipping
As with movement type 502, a return delivery to the vendor is entered without reference to the purchase order, but the goods issue is posted via a delivery in Shipping.
Possible special stock indicators:
E
671 Returns for stock transport order via Shipping
If a purchase order item is marked as a returns item in a stock transport order using movement type 641 when a goods receipt for a stock transport order ( 101) is posted, the return is posted to stock in transit using movement type 161. When the return arrives, the issuing plant posts the goods receipt for the return using movement type 671. Movement type 671 (like movement types 352 and 642) reduces the receiving plant's stock in transit and increases the issuing plant's unrestricted-use stock.
Possible special stock indicators:
E, Q
673 Returns for cross-company stock transport order
(Shipping)
If you post a goods issue for a cross-company stock transport order with returns items using movement type 643 via Shipping, the returns are transferred to unrestricted-use stock in the issuing plant in a second step using movement type 673.
Possible special stock indicators:
None
See also: 643
675 Returns for cross-company stock transport order
(Shipping) in one step
If you use movement type 645 to post a goods issue for a cross-company stock transport order with returns items in one step, the returns are transferred to unrestricted-use stock in the issuing plant using movement type 161 in the receiving plant and movement type 675 in the issuing plant.
Possible special stock indicators:
None
See also: 645
677 Returns for stock transport order in one step (Shipping)
If you use movement type 647 to post a goods issue for a stock transport order with returns items in one step, the returns are transferred to unrestricted-use stock in the issuing plant using movement type 161 in the receiving plant and movement type 677 in the issuing plant.
Possible special stock indicators:
E, Q
See also: 647
701 Inventory differences in unrestricted-use stock (MM-IM)
This movement is generated automatically during inventory difference posting in Inventory Management.
Possible special stock indicators:
E, K, M, O, Q, V, W
703 Inventory differences in quality inspection stock (MM-IM)
This movement is generated automatically during inventory difference posting in Inventory Management.
Possible special stock indicators:
E, K, M, O, Q, V, W
707 Inventory differences in blocked stock (MM-IM)
This movement is generated automatically during inventory difference posting in Inventory Management.
Possible special stock indicators:
E, K, M, Q
711 Inventory differences in unrestricted-use stock (LE-WM)
This movement is generated automatically when you post inventory differences in the Warehouse Management System.
Possible special stock indicators:
E, K, M, Q
713 Inventory differences in quality inspection stock (LE-WM)
This movement is generated automatically when you post inventory differences in the Warehouse Management System.
Possible special stock indicators:
E, K, M, Q
715 Inventory differences in blocked stock returns (LE-WM)
This movement is generated automatically when you post inventory differences in the Warehouse Management System.
Possible special stock indicators:
None
717 Inventory differences in blocked stock (LE-WM)
This movement is generated automatically when you post inventory differences in the Warehouse Management System.
Possible special stock indicators:
E, K, M, Q
721 - Sales value receipt - not affecting margins (Retail)
The movement is generated automatically when the sales price of a value-only material is changed (total sales price revaluation on the posting date).
Possible special stock indicators:
None
731 - Sales value receipt - affecting margins (Retail)
The movement is generated automatically when the sales price of a value-only material is changed (partial sales price revaluation on the posting date).
Possible special stock indicators:
None
regards
Yogesh

Report to check the stock transfer through 303 mvt type

Hi,
I understand that the stock transfer can be done through two ways
1. Using 351 against UB PO and go MIGO using 101 --> Can be checked in the report MB5T, for stock in transit
2. Using 303 and 305 mvt type --> the stock lies in Stock trans(Plant)
When we do 303 mvt type, is there any standard report to check the stock in stock trans (Plant) ? Please let us know.

hello
for this you can use MB51 only. same report you can give the movement types as 313 & 315.
Laxman

Automatic creation of Purchase order not possible for 103 mvt type

Hi,
If i could configure "create p.o automatically", while doing G.R for mvt type 101,
why cannot i do the same with 103 mvt type.
I checked the checkbox "create p.o automatically" for movement type 103 and tried to do G.R for others using Mvt type 103.
It is throwing error as "Update control of movement type is incorrect (entry 103 x x).
Which entry controls the above my requirement?
Please advise .
Thank you.

Hi,
These are std which is provided my SAP, you can configure for automatic PO creation for 101 movt type only..........

Automatic creation of Batch using mvt type 311

when i am trying to transfer material from one storage location to another using mvt type 311. the system is not creating the batch automaticcally.
I have already maintained allthe basic configuration required for this.even in IMg ->logistic general->batch management---->creation of new batch in this path also for mvt type 311 i mainatined (automatical/manual without check)batch creation.but still the system is not generating the new batch.
Can anybody help in this issue.
Thanks in advance

Hi,
When you do transfer postings, SAP will set the batch number same as the one from which you are issuing the stock. To avoid this you can set the creation of batch to B (Automatic/ Manual with check in user exit)
You need to use following user exit at batch creation
EXIT_SAPLV01Z_001
EXIT_SAPLV01Z_002
Hope this helps, reward if useful,
Best Regards VS

Goods Issue Problem - Mvt Type 645

I am trying to do Goods Issue - VL10B.
Error message showing:
1)Delivery has not been put away/picked (completely)
2)The Storage location is not defined for delivery item 000010
it is a single step automatic GR (Mvt Type 101). The material to be posted (XFF38) is a non valuated material with Accounts Assignment. We are trying to post the stock directly to consumption.
Please help me
Edited by: Vijay Kakani on Feb 25, 2008 4:26 PM

Hi
a material is intended for consumption/usage, the order contains an account assignment (for example, a cost center, project, sales order, etc.). For items to be posted directly to consumption/usage, Production or MRP, you can enter a recipient or an unloading point in the order. Both specifications are automatically proposed by the system during entry of the goods receipt. Note that you can change the unloading point, but not the recipient.
if underdeliveries are allowed in the system, then The system interprets the quantity received as a partial delivery and accepts it as such. The system issues a warning message indicating that there has been an underdelivery.
It is also possible to enter an underdelivery tolerance percentage in the order item. When a quantity of goods is received that lies within the underdelivery tolerance range, the quantity is interpreted as a partial delivery and is accepted as such. The system does not issue a warning message. If the quantity of goods received lies below the underdelivery tolerance, the system issues a warning message.
If the underdelivery is not a partial delivery but a final delivery, you have to set the "delivery completed" indicator.
In the Customizing system, you can define that the "delivery completed" indicator is set automatically if the underdelivery lies within the tolerance limits. In this case, the system interprets any underdeliveries within the tolerances as final deliveries.
check the configuration for under delivery tolerance
Hope this helps
BR
SK

How to stop user from using 961 mvt type in MB1C transaction code?

Hi Friends,
We have two companies. Already we have restricted end user for using 961 & 962 mvt type in MB1C transaction code in one company code 1000. Now, we want to restrict end user for using 961 & 962 mvt type in MB1C transaction code in other company code 1200.
I have checked configuration using OMJJ transaction. But, it is there so there may be some different way of control.
Can any body help me?
Regards
Siva

Hi,
To restrict/block the movement type, the steps are:
1. use transaction code OMJJ.
2. Enter the movement type you want to block.[From 961 To 961](do for both961& 962)
3. Select the Second option in the List which appears in the left. (Allowed Transaction).
4. Remove the transaction codes (MB1C)from where you do not want to use that particular movement type& save.
For user specific to block the movement type, pl consult Basis Consultant.
Regards,
Biju K

MB1B, Mvt Type 351 not posting to "stock in transit"

Hello Experts,
I have created the STO. Now I am executing MB1B with mvt type 351. When I open the material document created, I look at the financial documents, the stock value has been relieved from the supplying plant and posted to the receiving plant. I thought using the 351 mvt was to put the stock in a status of "stock in transit". Only when the receiving plant performs the goods receipt should the stock value post in their plant. Am I using the wrong mvt type or is there a setting I must do to be able to post a material to "stock in transit" status?
Thanks in advance for your help!

Hi
check follwoing links
[stock transit 351 movement type;
)Make sto with t code:me21N at receiving plant.
2)go to MIGO make goods issue agaist the above sto from the supplying plant (movement type:351)
3)go to migo and make GR(movement type:101) at receiving plant agaist material issue document no or sto
For this you need to maintain some configuration at
SPRO: MM > Purchasing > purchase order > set up Stock transfer order
check your settings at this node:
"Assign document type . one step procedure, undelivery tolerance" mention supplying plant,
receiving plant, document type and tick required check boxes
Regards
Kailas ugale

OMJJ - Account grouping - Add mvt type indicator L

Hi
Pertinent to; The account grouping in movement type for 101.
For the STO I have enabled the Goods Recipet using MIGO and mvt type is 101. But the Reference document would be Outbound delivery instead the STO purchase order.
Now the issue is after GR the Stock account is not debited as the movement type is not configured for Outbound delivery based GR. How do i add the movement type indicator "L" Goods movement for delivery note in OMJJ-Account grouping ?
Currently only for F & B not for L.
Thanks in advance
Regards
RG

Hi,
The Process flow is Stock Transport Order --> Outbound Delivery --> Goods Receipt
So Outbound Delivery has a link with Stock Transport Order i.e. Receipt Indicator "B" so during GR against OBD it will consider B, no need of maintaining L and also it is not possible.

Mvt type 301 'o'

Hi All,
We have the issue in the subcontracting :
we have 2 plants 0920 and 0931 . the subcontract vendor has assign to both the plant with the same vendor account number vc21707.
we do manufacturing one assmy by the above subcontract. for that we send the components of the assmy from the plant 0920. and they doing the process. after that we need to do GRIR for the assmy to the plant 0931. since we lock out the old palnt 0920.
client do not want the classical process. reverse the material and sto b/w plants and send thru new plant.
instead they need do the transfer the suncontrator stock which is given from 0920 to the new plant 0931
i.e. need to tranfer the subcontractor stock account from one plant to other plant account ,in which the vendor no is same to both the plant
how the mvt type 301 'o' type is used for this, do any configuration is needed.

Hi kishore,
we are doing this alone :
You can use only 301 O if stcok is already insubcontractor stock and you are transferring to other plant in the same stcok type.
but when doing this system check the restricted sub-contractor stock , but we have the unrestricted sub contractor stock.
thats why system show the error
Deficit of Stock w. vendor rstr 1.000 PC : 54204118 0920 O
Message no. M7021
HOW TO SOLVE THIS ISSUE.
Edited by: raj on May 20, 2009 12:03 PM

QM insp lots for mvt type 315

Dear All,
senario is as below
we are doing 313 movt within the same plant for stock transfer after 313 stock will be in transit after that we
do 315 movt for recieving of the stock.
settings done insp activated for 313 and 315 movt types and 08 insp type is activated in M.M.
but system is not creating insp lots and the stock directly goes into unrest use.
can any body suggest what setting is missing?
your suggestions will be highly appreciated
Thanks
Anil

Hi Anil
when you post using 315 mvt. type, system will create inspection lot
plz. check @ OMJJ -- for the 315 mvt.type -- QM should be active --> then system will create inspection lot
before that make sure Mat. master for that material 08 insp. active ,and post to inspection stock,task /mat spec, and Automatic assignment and characteristc --> these fields to be active
let me know if u need further detail
Thanks
Sami

Cost Center required for Mvt Type 309

Hi,
In the standard configuration of Mvt Type 309 without special stock indicator, is the cost center field required?

Hi
Cost center is not a mandatory field for movement type 309.
Material to material transfer posting is possible only if both the materials are maintained in the same base unit of measure.
The following additionally applies to material-to-material transfer postings:
They cannot be preplanned via a reservation.
They can only be posted from unrestricted-use stock of the issuing material to
unrestricted-use stock of the receiving material.
They can only be posted in a single step.
Hope it helps
Thanks/Karthik

Configure 313 Q mvt type

Similar Messages

Maybe you are looking for