Configure a current clamp

Hello
I have a fluke model 80i-110S Current clamp which I want to acquire an analogue signal from.
I have a NI-BNC-2111 interface hooked into a PXI 6289 DAQ card. 
I have verified that my current clamp is outputting 100 mv / amp of current
I have used LabViews DAQ assistant to configure a channel and I do not seem to be getting the expected response from the DAQ card. 
My Voltage input channel is configured as listed below
I am trying to read a voltage input between -10 to 10 V using a 1 Sample (on Demand) Acquisition Mode.  I have cycled through all available terminal configurations however none of them seem to be accurately recording the input voltage.
Is there something I am missing on with the configuration of this channel?  When I tried to create a channel to record system voltage in conjunction with current the X Y plots seem to diverge from each other.
Tim
Solved!
Go to Solution.

Hello smoothdurban,
Since your current clamp is outputting 100mV/A, it is actually working as a resistance of 100m Ohm (R=V/I=100mV/1A=100mOhm).  Therefore, my suggestion would be to create an Analog Input Current task in your DAQ Assistant, set your shunt resistor to 100m, and configure your minimum and maximum current. This way you would be recording the current directly.
Jorge
Applications Engineer
National Instruments
Certified LabVIEW Associate Developer (CLAD)

Similar Messages

  • Configuration scenario currently being edited by user" & locked

    HI all,
    Appreciate your help on this object locks;
    I was changing some configuration scenarios in integration Directory - suddanly lost the internet connection;
    Now when i try to change it says "configuration scenario currently being edited by user" & locked
    I appreciate if you help me to remove these lock objects
    Thanks
    Iver

    Hi,
    Go to administration -
    Select appropriate option out of these - > repository/ Directory
    now select LOCK OVERVIEW.
    now you will get all the locked objects by any user.
    Now focus on locked object which you want to realese
    now press Button Release Lock .
    Hurray !!! locks are released.
    Hope this helps .....
    regards
    prabhat Sharma.

  • Timed out trying to acquire network configuration lock, current owner = 'iphlpsvc.dll'.

    Guys, 
    I have been unable to configure any adapters for Hyper-V on my Windows 8.1 Surface. Here is the error
    PS C:\Users\Martin> New-VMSwitch -Name “NewSwitch” -NetAdapterName “WiFi” -AllowManagementOS $True
    New-VMSwitch : Failed while creating virtual Ethernet switch.
    Switch create failed, name = 'B3D5509F-6645-42F8-8917-0C9831905460', friendly name = '': Operation times out (0x80041069).
    Timed out trying to acquire network configuration lock, current owner = 'iphlpsvc.dll'.
    The operation timed out.
    At line:1 char:1
    + New-VMSwitch -Name “NewSwitch” -NetAdapterName “WiFi” -AllowManagementOS $True
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : OperationTimeout: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VMSwitch], VirtualizationOperationFailedException
    + FullyQualifiedErrorId : OperationTimeout,Microsoft.HyperV.PowerShell.Commands.NewVMSwitchCommand
    I would appreciate any help as I could not find anything online.
    -MrHinsh <br /> <br /> Principal Consultant | naked ALM Consulting <br />

    Hi,
    Have you tried to restart Ip Helper service for testing?
    Considering if the related DLL file was corrupted or blocked, you can test in Clean boot.
    Also run SFC /scannow command as admin to scan your system, if any file was failed to repair, post back the CBS.log for our research.
    Kate Li
    TechNet Community Support

  • How to configure current SQL high availability cluster using mirroring with dedicated replication NICS?

    We have a current HA cluster at center1 which is mirrored to another HA cluster in center2.   We have several instances already installed and working which are using one NIC for data and replication.  We want to prevent mirror failovers by
    configuring a NIC on a replication network which has no DNS server.   What are the steps to configure the current SQL instances to use this dedicated NIC for mirror replication? 

    Hi dskim111,
    You can refer the following step by step article to create the dedicated mirroring NIC,
    Step by Step Guide to Setup a Dedicated SQL Database Mirroring(DBM on dedicated Nic card)
    http://blogs.msdn.com/b/sqlserverfaq/archive/2010/03/31/step-by-step-guide-to-setup-a-dedicated-sql-database-mirroring-dbm-on-dedicated-nic-card.aspx?Redirected=true
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • LV12 How to configure PXI-4070 DMM current function?

    Dear all
    I have a problem about LV12 software to config PXI-4070 DMM current function.
    my vi...NI DMM initial >>>NI DMM reset >>> NI DMM Configure Measurement (Current function) >>> NI DMM Reading >>>>
    When I testing with my vi, the calibrator (source) error "Current Compliance Voltage Exceeded".
    but when I testing with DMM front panel 3.0, the calibrator can generated current and PXI-4070 can reading.
    Please help me to solve this problem.
    Regard,
    Sermsak.
    Solved!
    Go to Solution.

    The error looks like it is related to a power supply or an SMU that is trying to source something out of its specified range.
    Info about compliance:
    http://zone.ni.com/reference/en-XX/help/370736L-01​/ni_dc_power_supplies_help/compliance/
    http://zone.ni.com/reference/en-XX/help/370736L-01​/nidcpowerviref/nidcpower_query_in_compliance/
    Things to consider:
    1) Where in the code is the error occurring?
    2) Can you run example NI-DMM code? (from Help>>find examples>>Hardware I/O>>Modular Instruments>>NI-DMM)

  • I have a problem with my 15" MBP mid-2010 currently running Lion.

    My laptop crashes for no apparent reason. The keyboard stay lit and the fans run but the computer is completely blacked out with the capslock button and all other buttons stuck and I have no choice but to forcefully power down the Macbook. Please advise.
    I don't know what's happening and I am trying to steer away from spending any cash if necessary?
    As a student i don't have much spare cash, my hard drive configuration is currently in striped RAID and i wonder if that's what's causing the issue.
    Interval Since Last Panic Report:  126515 sec
    Panics Since Last Report:          9
    Anonymous UUID:                    A234557F-D522-4F8D-AC01-D9245C22BED9
    Tue Mar 19 09:12:08 2013
    panic(cpu 2 caller 0xffffff7f80a4d007): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811872f000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 2), Frame : Return Address
    0xffffff80e2a3afa0 : 0xffffff8000220792
    0xffffff80e2a3b020 : 0xffffff7f80a4d007
    0xffffff80e2a3b0b0 : 0xffffff7f80b45b83
    0xffffff80e2a3b110 : 0xffffff7f80b45bf7
    0xffffff80e2a3b180 : 0xffffff7f80e47855
    0xffffff80e2a3b2c0 : 0xffffff7f80b69ddd
    0xffffff80e2a3b2f0 : 0xffffff7f80a56d6a
    0xffffff80e2a3b3a0 : 0xffffff7f80a5243c
    0xffffff80e2a3b590 : 0xffffff7f80a53668
    0xffffff80e2a3b660 : 0xffffff7f81f8a4d9
    0xffffff80e2a3b720 : 0xffffff7f81fbfeb6
    0xffffff80e2a3b7b0 : 0xffffff7f81fa2e99
    0xffffff80e2a3b810 : 0xffffff7f81fa32d1
    0xffffff80e2a3b860 : 0xffffff7f81fa3694
    0xffffff80e2a3b8f0 : 0xffffff7f81fa44ed
    0xffffff80e2a3b930 : 0xffffff7f81f602a1
    0xffffff80e2a3baa0 : 0xffffff7f81fa4d6d
    0xffffff80e2a3bb60 : 0xffffff7f81f5d346
    0xffffff80e2a3bbc0 : 0xffffff8000655f3e
    0xffffff80e2a3bbe0 : 0xffffff800065681a
    0xffffff80e2a3bc40 : 0xffffff8000656fbb
    0xffffff80e2a3bd80 : 0xffffff80002a3f08
    0xffffff80e2a3be80 : 0xffffff8000223096
    0xffffff80e2a3beb0 : 0xffffff80002148a9
    0xffffff80e2a3bf10 : 0xffffff800021bbd8
    0xffffff80e2a3bf70 : 0xffffff80002aef10
    0xffffff80e2a3bfb0 : 0xffffff80002daec3
          Kernel Extensions in backtrace:
             com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f809 e6000->0xffffff7f80ce1fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f808bb000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f809d4000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f8099b000
             com.apple.nvidia.nv50hal(7.3.2)[38ACBB3D-4E3C-3883-9A4B-67F15592905F]@0xffffff7 f80ce2000->0xffffff7f81004fff
                dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f809 e6000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f808bb000
             com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81f520 00->0xffffff7f82014fff
                dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f809 e6000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f809d4000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f808bb000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f8099b000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    11G63b
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 452764859288
    last loaded kext at 18992049359: com.parallels.kext.prl_hid_hook          7.0 14922.693916 (addr 0xffffff7f807a8000, size 20480)
    last unloaded kext at 165273820167: com.apple.driver.AppleUSBUHCI          5.1.0 (addr 0xffffff7f81763000, size 65536)
    loaded kexts:
    com.parallels.kext.prl_hid_hook          7.0 14922.693916
    com.parallels.kext.prl_usb_connect          7.0 14922.693916
    com.parallels.kext.prl_hypervisor          7.0 14922.693916
    com.eltima.ElmediaPlayer.kext          1.58
    net.telestream.driver.TelestreamAudio          1.0.5
    com.parallels.kext.prl_vnic          7.0 14922.693916
    com.parallels.kext.prl_netbridge          7.0 14922.693916
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AGPM          100.12.75
    com.apple.driver.AppleHDA          2.2.5a5
    com.apple.driver.AppleMikeyDriver          2.2.5a5
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.ApplePolicyControl          3.1.33
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.SMCMotionSensor          3.0.2d6
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
    com.apple.driver.AppleMuxControl          3.1.33
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.GeForce          7.3.2
    com.apple.driver.AppleIntelHDGraphics          7.3.2
    com.apple.driver.AppleIntelHDGraphicsFB          7.3.2
    com.apple.driver.AppleSMCPDRC          5.0.0d8
    com.apple.driver.AppleUSBTCButtons          227.6
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
    com.apple.driver.AppleUSBTCKeyboard          227.6
    com.apple.driver.AppleUSBCardReader          3.0.6
    com.apple.driver.AppleIRController          312
    com.apple.driver.AppleRAID          4.0.6
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.1.0
    com.apple.driver.AppleFWOHCI          4.9.0
    com.apple.driver.AppleUSBHub          5.1.0
    com.apple.driver.AirPort.Brcm4331          561.7.22
    com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleAHCIPort          2.3.1
    com.apple.driver.AppleUSBEHCI          5.1.0
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.4
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.driver.DspFuncLib          2.2.5a5
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.2.5a5
    com.apple.iokit.IOHDAFamily          2.2.5a5
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleGraphicsControl          3.1.33
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.nvidia.nv50hal          7.3.2
    com.apple.NVDAResman          7.3.2
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
    com.apple.iokit.IOBluetoothFamily          4.0.8f17
    com.apple.driver.AppleUSBMultitouch          230.5
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
    com.apple.iokit.IOUSBMassStorageClass          3.0.3
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.0
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOFireWireFamily          4.4.8
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IOEthernetAVBController          1.0.1b1
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOUSBFamily          5.1.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.9
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 1.58f17
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3030352E4130324C4620
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x0198, 0x393930353432382D3030352E4130324C4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.198.19.22)
    Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: INTEL SSDSC2CW240A3, 240.06 GB
    Serial ATA Device: ST750LX003-1AC154, 750.16 GB
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 4
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 3
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

    When you inserted the Snow Leopard DVD, did you hold down the option key while restarting?  You need to do this to tell your iMac to give you the choice of booting from the DVD.  Once you have reinstalled Snow Leopard you should be able to go to the App Store and reinstall Lion.
    Good luck.

  • Optimal configuration for Cisco E3000 Router

    Hi All,
    Following are the details of my current home network setup, I would like to hear more recommendations and drawbacks of this setup.
    ISP has provided with a Cisco  DPC3825 DOCSIS 3.0 Gateway which has 4 Ethernet ports and a wireless networking but only 2.4 GHz.. This router is connected to the cable CPE box to internet. I have enabled the Firewall features of this router and disabled the Wireless network. This has also the DHCP server running. 
    The Second router is a Cisco E3000 which supports 2.4 GHz / GHz wireless networking. Connection to gateway is made via the 1st Ethernet port of gateway and then to the Internet port of E3000 router. I have connected my wireless devices to E3000 with GHz wifi lan. This router also has the firewall activated and DHCP server running as well.
    Both routers have WEP2 Personal / AES security configured. Currently these two devices are on two different IP ranges ..etc gateway is 192.168.0.1 and e3000 is 192.168.1.1.
    The E3000 is primarily configured for my online video for TV (Panasonic Vireacast). Please let me know if this is the best configuration or any other possible options.
    Thanks,
    RG

    This configuration is called LAN to WAN configuration and this is the best configuration considering that you want to behave both the router as a router.
    Because the other confiuration would be LAN to LAN then you can only use 1 router as a router and 2nd router as a switch.
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=529c188bc0ee4f7da79ffc22f2be33ec_4579.xml&pid=80&r...
    The first configuration in the article is is LAN to LAN, scroll down the window for LAN to WAN configuration.

  • SCCM 2012 - Unable to locate any configured SRS

    I got this error while configuring the SCCM 2012 "Reporting Point"  
    Please advise what is the problem even I install  the reporting service in SQL  
    Configuration Manager
    Unable to locate any configured SRS instances on the server. Verify SRS is installed, accessible, and correctly configured.
    Current Setup:
    SCCM Server - SCCM 2012 SP1
    Database Server - SQL Server 2008 10.0.5828.0

    See here for troubleshooting tips:
    http://www.windows-noob.com/forums/index.php?/topic/5486-cannot-install-reporting-point-role-sccm-doesnt-see-reporting-services/
    Mike Crowley | MVP
    My Blog --
    Planet Technologies

  • Configuring SRM SUS Application

    Hi Experts,
    I need your help and suggestions. please help me on that.
    Current Deployment & Problem:
    We have deployed “Supplier Collaboration 4.0” Business packages in portal. We could see there are Webdynpro Java and BSP iviews.
    To load the BSP iviews in the portal, it requires SRM 7.01 system need to be given as “System Alias” in the portal iview configuration. Currently we don’t have SRM 7.01 system in our Landscape. So iviews are not visible in the portal.
    Expected Version of Business package only for ECC:
    Is it possible to get similar kind of Busineess package only for ECC with functionality of view purchase order, confirm purchase order, Attach Invoice against confirmed PO etc. Also is it possible to get webdynpro Java iviews or webdynpro ABAP iviews or UI5 iviews with Business package component.
    Please clarify my doubt and provide any suggestions to proceed without SRM or SUS configuration.
    Thanks for the help in advance.
    Regards,
    Karthick

    Have you got any chance to check here?
    SAP BusinessObjects 4.0 Monitoring Configuration - Part(1)
    SAP BusinessObjects 4.0 Monitoring Configuration - Part(2)
    SAP BusinessObjects 4.0 Monitoring Configuration - Part(3)
    You can get most of questions  answered here

  • Separated j2ee & n pdk servers configuration problem

    Hi,
    i can preview a portal page, but the iview within gives an error.
    please let me know the configuration to be changed in order to successfully run the Portal Component [ivew] using the .NET PDK
    i am running the following:
    portal server
    J2ee - java stack : nw2004s : sp09
    win2k3 : 64 bit
    ip : 10.8.2.64
    sys no : 04
    url portal access : http://10.8.2.64:50400/irj/portal
    .net pdk 2.0 for vs 2003 : hf1, hf2
    win xp sp1 : 32 bit
    ip: 10.8.1.101
    server00
    ports 8050 & 8051 are opened on the firewall
    Property Editor - ara:/applications/com.sap.portal.dotnet.framework/services/iViewProcessorService
    1. .NET Runtime Servers Configuration
    *=10.8.1.101:8050;
    2. Portal Servers Configuration
    *=10.8.2.64:50400;
    3. .NET Runtime Failover Servers Configuration
    *=10.8.1.101:8050;
    4. Allow Server Affinity
    true
    5. Display ASP.NET Stack on ASP.NET Error
    false
    6. Enable Ja.NET Logging
    false
    7. Lease Duration (seconds)
    10
    8. Request Timeout (milliseconds)
    10000
    9. Production Mode
    false
    Ofer's reply on
    Re: Could not find portal application com.sap.portal.common.commonservices
    was helpful, but still not allowing my portal component to run successfully
    a question on the Portal Servers Configuration
    my current  *=10.8.2.64:50400;
    default : *=localhost:8051
    i have also tried with
    *=10.8.2.64:8051; [but this was just a trial, as i do not have the 8051 port on the portal server listening]
    what is the port number i should be pointing to on the portal server ?
    with respect,
    amit
    default.trc error message :
    Exception ID:02:44_01/02/07_0002_49569850
    [EXCEPTION]
    com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
    Component : pcd:portal_content/PDK_for_NET/myDesk/pages/page1/page1_PortalComponent1
    Component class : com.sap.portal.dotnet.framework.iViewProcessorComponent
    User : Administrator
         at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
         at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.lang.RuntimeException: <br>iView cannot display. <br>Could not connect to the .NET runtime server. <br>Contact your administrator if the problem persists.<br>Possible reasons:<br>1. The Portal Runtime for .NET service is not running or installed.<br>2. The .NET Runtime Servers Configuration property of 'iViewProcessorService' service is not correct. Check the syntax of server nodes, hosts and ports settings
         at com.sap.portal.dotnet.framework.iViewProcessorService.handleRequestCompletion(iViewProcessorService.java:383)
         at com.sap.portal.dotnet.framework.iViewProcessorService.ProcessRequest(iViewProcessorService.java:139)
         at com.sap.portal.dotnet.framework.iViewProcessorComponent.doContent(iViewProcessorComponent.java:36)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         ... 7 more
    Exception in PortalRequestManager.dispatchRequest without timeout
    [EXCEPTION]
    java.lang.RuntimeException: <br>iView cannot display. <br>Could not connect to the .NET runtime server. <br>Contact your administrator if the problem persists.<br>Possible reasons:<br>1. The Portal Runtime for .NET service is not running or installed.<br>2. The .NET Runtime Servers Configuration property of 'iViewProcessorService' service is not correct. Check the syntax of server nodes, hosts and ports settings
         at com.sap.portal.dotnet.framework.iViewProcessorService.handleRequestCompletion(iViewProcessorService.java:383)
         at com.sap.portal.dotnet.framework.iViewProcessorService.ProcessRequest(iViewProcessorService.java:139)
         at com.sap.portal.dotnet.framework.iViewProcessorComponent.doContent(iViewProcessorComponent.java:36)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
         at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
         at java.lang.Thread.run(Thread.java:534)
    The system server log entry:
    Wed Jan 31 13:38:04 NZDT 2007 Processing request failed on host: tcp://10.8.1.101:8050 Could be a problem in the PDK for .Net framework!
    and i have ensured that the service logon has write priviliges on
    1> windows  Temp
    2> ms .net framework
    3> program files  prt for ms.net
    the installation verification tool
    reports that it did not find the file :
    SAP.Portal.DotNET.RunTime.Installer.dll file
    all other files have verisons 1.2.0.0 or 2.0.0.13

    Possible causes for your issue:
    1. The Portal Runtime for .NET service is not running or installed.
    2. The .NET Runtime Servers Configuration property of 'iViewProcessorService' service is not correct. Check the syntax of server nodes, hosts and ports settings                                                                               
    So did you installed Portal Runtime 2.0 for .Net.                      
    https://websmp107.sap-ag.                                              
    de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000887162006E     
    Please refer to document as above.                                     
    Regads,
    Fabio

  • How to configure Yahoo IMAP with ATT.Yahoo service

    I'm hearing about using Yahoo IMAP push server, but can find no such option about configuring my current ATT.Yahoo service for anything but POP/SMTP. Where should I be looking? Thanks

    I could find this info nowhere so hopefully this will help someone with the same problem I was having.
    In case anyone with an ATT.YAHOO account formerly SBC, or Pacbell, etc. You have to manually set up an IMAP account. So if your e-mail address is "[email protected]", you would Add an account, choose Yahoo Y! Mail and enter your [email protected] address and your ATT.YAHOO POP password. It will confirm the account and you will now have IMAP Push e-mail on your ATT account. But your ATT.Yahoo account (as far as I can tell) must remain a standard POP account on OS X Mail on your Mac. So you don't want to synch your iPhone ATT.Yahoo Mail accounts.

  • Managing several project configurations

    Hi!
    Being a newbie with Sun Studio, but not exactly with programming, I have a question regarding project configurations.
    Currently, I have a group of projects configured as dynamic libraries, the number may grow up to between 10 and 20. I want to be able to switch to static libraries, or even have both. Is this possible in a centralized way, so that I can change the type of the library in one place instead of in every project? Or perhaps even share project configurations?
    I could write my own makefiles or do something similarly murky behind the scenes, but then I'd sort of break the idea with a neat automated build system via the IDE.
    To make things simpler, the libraries are either all dynamic or all static, I don't need to mix both types.

    I'm almost positive that nothing like that exists in the GUI. If you can
    find a way to add an include Makefile into the auto-generated makefile
    you might be able to add some hooks there. But I don't think that's
    supported yet. Did you file an RFE at bugs.sun.com?

  • Javaws  -Xclearcache   System Configuration error

    I am running on windoze XA SP 2 with JDK 1.5.1_06. I am running on the system admin account but when I try to use the -Xclearcache option I get the error: below. In DOS I issue the command:
    javaws -silent -Xnosplash -Xclearcache test.jnlp
    An error occurred while launching/running the application.
    Category: System Configuration
    The current user does not have write access to the cache.
    JNLPException[category: System Configuration : Exception: null : LaunchDesc: null ]
         at com.sun.javaws.Main.main(Unknown Source)

    yes - this looks like a simple bug.
    If you want to specify a particular jnlp file to uninstall use:
    javaws -uninstall <jnlp-file-or-url>
    to clear the cache completely,
    javaws -XClearcache
    or
    javaws -uninstall
    seem to do the same thing, but
    javaws -Xclearcache either does nothing, or gets an error, depending on the other args.
    /Andy

  • How to configure SCCM 2007 to deliver apps to DMZ servers

    I'm needing some clarification and assistance here.  I'm providing some background as well.  This is my first foray in to this process, so the simpler and more thorough the explanations are, the better it will be for me.
    We're running Config. Mgr. 2007 in Mixed Mode (can't go Native at this point) in our corporate domain.  We also have 20 servers in our DMZ.  Some are in workgroups.  The rest are members of one
    of three AD Domains in the DMZ.  There is no trusted relationship with our internal corporate domain or between the domains in the DMZ.  I want to use SCCM to distribute a limited number of applications to all the DMZ servers, automating the process
    like we are currently doing, inside our firewall.  
    Here's the limited understanding I have from reviewing other posts, along with additional questions.  Please feel free to correct any misconceptions and also fill in the blanks.
    I'f I get the process correctly, the client is manually installed on DMZ servers.  They will communicate over port 80 (HTTP).  A SLP is required, which can be set up as part of the client command-line
    installation.  Alternatively we can set up a secondary site in the DMZ which will communicate over port 1433 to our internal network.
    The questions I have are these.  What box does the SLP have to be defined on if we not using a secondary site?  Also, is it a component of the client installation that is enabled on one server in the DMZ, or is it inside the firewall?  How
    are DMZ servers directed to it?
    If we use a secondary site in the DMZ, how does that affect our overall configuration?  Currently we're using a single SCCM server, no children.
    Thanks in advance for your assistance and information
    Thanks, Dino

    Here's a good guide to get you started :
    http://blog.coretech.dk/wp-content/uploads/The-complete-guide-to-System-Center-Updates-Publisher-2011-V1.01.pdf
    Benoit Lecours | Blog: System Center Dudes

  • Workspace configuration (saved)...

    It would be great if Pages / Numbers / etc were able to 'remember' the configuration of the workspace - similar to how Photoshop et al. remember my configurations.
    Currently every time I open up a document I am forced to reconfigure the layout of the app. Some of our workstations also have dual display setups - even more of a problem.
    If anyone knows a way of 'fixing' workspace configurations in iWork 08 please post your thoughts / observations / fix here. Thanks.
    Message was edited by: Carson Jones

    Hi!
    > My question is how does the workspace concept of RCP applications
    > translates into RAP ?
    Since RAP is a multi-user framework, it offers data-stores with
    different scopes. You should use those:
    http://eclipse.org/rap/developers-guide/devguide.php?topic=rwt/scopes.html
    >
    > Also my understanding is RAP is subset of RCP. So what are the
    > limitations of RAP ? What is not supported ? Is there any document ?
    Sure, here:
    http://eclipse.org/rap/developers-guide/devguide.php?topic=rwt/differences.html
    Greetings,
    Tim
    Tim Buschtöns
    Twitter: @EclipseRAP
    Blog: http://eclipsesource.com/blogs/
    Professional services for RAP and RCP?
    http://eclipsesource.com/services/rap/

Maybe you are looking for

  • INTERNAL_ERROR in multithreaded test on db xml 2.3.10

    I upgraded from 2.2.13 to 2.3.10. I'm on Windows XP / Java 1.5.10 My multi-threaded test soon hits INTERNAL_ERRORs when running on 2.3.10. While on 2.2.13, I have much better results. My test case basically sets up one or more threads doing a tight l

  • What is the use of restriction code in the ipod?

    i'm just wondering what's the use of restriction code because i have this problem, i wanted to lock the camera whenever someone takes a picture on my ipod they can't delete and upload it to there computer, so how to will i do that or how to do that t

  • Playing video parallel to slide show in iMovie 09

    Hello guys, I couldn't find a clue on google, so I try my luck here in this forum. Currently, I am working on an iMovie 09 project. This project shall include pictures as well as videos. As I don't want to wait for the video to finish in order to see

  • Unable to change password in new email under same ID name

    I would like to change passward but now i have new email how i can do? and still would like to be same ID log in name

  • Compare character variable in dynamic sql

    hi all i have a requirment in which i'll be using a dynamic sql: sql_string :='select * from temp_table where emp_name='||v_name; execute immediate ; i'm getting this error ORA-06502: PL/SQL: numeric or value error this is becouse v_name is character