Configure Acrobat Reader tool buttons when Reader is started inside SAP GUI

Hi,
we have deployed some registry keys in "HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\AVGerneral\cToolbars" to show some tool buttons in Acrobat Reader. This works fine when starting Acrobat Reader as standalone application.
But in SAP GUI the Acrobat Reader starts with default tool buttons.
Is there a chance to configure the Acrobat Reader tool buttons when the Reader is started inside a SAP GUI session?
thanks
Albert

These are the settings in the registry to show/hide tools in the Adobe Reader 9 toolbar.
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\AVGeneral\cToolbars\cBasicTools\cInternalButtons]
"a0"="Select"
"a1"="Hand"
"a2"="Zoomin"
"a3"="ZoomDrag"
"a4"="endBasicToolsGroup"
"a5"="ZoomViewOut"
"a6"="ZoomViewIn"
"a7"="ZoomTo"
"a8"="Zoom100"
"a9"="FitWidth"
"a10"="FitPage"
"a11"="endZoomTypeGroup"
"a12"="PanAndZoom"
"a13"="Loupe"
"a14"="SelectGraphics"
"a15"="endZoomToolsGroup"
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\AVGeneral\cToolbars\cCommenting\cStamp]
"bInternalExpanded"=dword:00000001
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\AVGeneral\cToolbars\cFile\cInternalButtons]
"a1"="Print"
"a2"="Save"
"a3"="SaveFileAs"
"a4"="FindDialog"
"a5"="endDialogGroup"
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\AVGeneral\cToolbars\cPageDisplay\cInternalButtons]
"a0"="endLayoutZoomTypeGroup"
"a1"="Fullscreen"
"a2"="endPageLayoutViewGroup"
"a3"="RotateCCW"
"a4"="RotateCW"
"a5"="Wireframe"
When starting Adobe Reader standalone this works fine.
But starting Adobe Reader from a SAP GUI Session (for example in transaction CV03N) the default tools will be shown.
Is there a chance to configure the Acrobat Reader tool buttons when the Reader is started inside a SAP GUI session?
thanks
Albert

Similar Messages

How to install Acrobat 7.0.9 when Reader 7.0.9 is already installed ?

Hi,
I would like to create the package of Adobe Acrobat 7.0.9 Standard. In English and in French.
I have downloaded the Adobe tool : ISTuner7_AdobeAcrobat.exe to create the MST file
The problem is : The computers have already Adobe Reader 7.0.9 installed.
In first hand, when i'm trying to install "manually" Acrobat 7.0 on this computer I have a windows asking me to choose the correct soft to open PDF file (Acrobat 7.0.9 or Reader 7.0)
I choose Acrobat 7.0.9 and continu the installation until the end normally.
In second hand, when i'm running the package, I got error popup 1404 about some key in registry that i don't have enough permission..
But, if I uninstall Adobe Reader and restart the computer before to launch the package of Acrobat, it's doing fine.
So, for me the issue come from some registry key of Reader that i can't modify by the package automatically.
Do you know the righ parameter to add at the msiexec commande line to FORCE the choice of which soft to use to open a PDF file ?
Thank you

From: <[email protected]> | Adobe STRONGLY recommends that you DO NOT not have Acrobat and Reader installed on the | same system. If you have just Acrobat installed, it will perform all the functions | Reader does and much more. Therefore, you should uninstall Reader, install Acrobat, and | DO NOT install Reader again. | Ken F. Not to mention that nobody should be using Adobe Reader v7.x do to all the vulnerabilities in it that are *actively* being exploited ! -- Dave

Error 1053 when i will start the sap router service

Hi All,
when i have start the saprouter service below following errors.
could not start the saprouter service on local systems
Error:1053 : the service didnot respond to the start or control request in a timely fashion.
Please guide me,
Thanks & Regards,
Suresh.K

Please check your saprouter.exe version... Unicode or non Unicode ?
Open a command prompt and type 'saprouter -V' to find out if it is an Unicode or non Unicode version. If not sure, download both versions from the SAP Service MarketPlace and try them...
You can also generate a dev_rout file by running your saprouter command in a prompt, removing 'service' and adding '-V2' (to activate the level 2 of your dev_rout trace). The content of your dev_rout file should give the cause of the problem...
Hope this helps,
Christophe

Gmail on Pre does not update read items automatically when reading them from a computer. (this might be more of a suggestion than a problem)

Basically I got Gmail on my Pre set to push emails as they arrive, I also have Exchange setup the same way.
Now lets say I look at my email screen on the Pre and it shows me I got 3 new gmails and 3 new exchange emails. But rather than jumping on the Pre to check them, I get on my desktop computer instead. I go open up gmail, read all the emails, and gmail on my computer now shows I have 0 new messages. I do the same for Exchange.
Now I go back on my Pre to see what it says. It says I have no new Exchange emails, but still shows 3 new gmails. I even open up gmail on the Pre and the 'new' email number in the right hand corner does its little animation like its updating itself, but it still says 3 and I have 3 emails bolded. And the Pre seems to continue to tell me I have 3 new emails until I manually hit the refresh/sync button in the lower right hand corner.
Bascially I would like the gmail to act the same as exchange and update read emails instantaneosuly. Also it would be nice if Palm could work in a feature where if I did read the emails on a device other than the Pre, the little icon notifications would go away too.
Post relates to: Pre p100eww (Sprint)

Okey I think I have found a solution for this problem. I have Pre plus (AT&T) and faced the same issue as you. Mail was not getting updated as read when I already read it using outlook on my computer.
Upon looking at the SMTP setting on Pre I see that by default its security is SSL and port is 465. I just changed the port to 587 and now it works as it should be
Try this trick and let us know...

Blackberry Classic does not show read in outlook when read on device for emails

The issue is that when an email is read on blackberry it does not show read on outlook on laptop and vice versa. Any ideas?

Need to know what type of mail server you are using. If it is Outlook on Exchange then they both will sync up, ie both show read when opened. If you are using POP email then it will not sync, you will need to open your mail on both to show as read. This is not a BB issue, it;s the nature of the beast with any phone. Now if your email provider supports IMAP,then set your BB up that way and it will synce so all mailboxes look the same.

Error when try to start the sap system in SAPMMC

Hello gurus,
I´m faccing with a serious problem, I´m trying to figure out a solution for this but I don´t get it!! My God..
Database - MS SQL 2005
System- ECC 6.0
OS- Win 2003 Server X64
When I tried to start the system by SAPMMC the system keep in with yellow semaphoro.
I checked some log file such as:
dev_disp:
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Sat May 01 04:31:21 2010
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12996]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 328 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 328 (pos=2)
SiSelNRemove: removed sock 328
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpSemRq: key: 2, units: 1, timeout: -1
DpSemRel: key: 2, units: 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 328
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3108) [dpxxdisp.c 11183]
Good Bye .....
(With continuation...)

Hi again Gagan,
More information about that R3trans -d:
TRANS.log File:
4 ETW000 R3trans version 6.14 (release 700 - 03.11.09 - 14:15:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 01.05.2010 - 17:03:33
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sat May 01 17:03:36 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbmssslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dbmssslib.dll"), hdl 0, addr 00000001872B0000
4 ETW000 21568 0.021568
4 ETW000 [dev trc ,00000] using "E:\usr\sap\DEV\SYS\exe\nuc\NTAMD64\dbmssslib.dll" 14 0.021582
4 ETW000 [dev trc ,00000] Library 'dbmssslib.dll' loaded 16 0.021598
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbmssslib.dll 15 0.021613
4 ETW000 [dev trc ,00000] Version of 'dbmssslib.dll' is "700.08", patchlevel (0.236) 1248 0.022861
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbmssslib.dll 20 0.022881
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbmssslib.dll 12 0.022893
4 ETW000 [dev trc ,00000] New connection 0 created 98 0.022991
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 64 0.023055
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 49 0.023104
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 15 0.023119
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.023151
4 ETW000 [dev trc ,00000] Thread ID:2484 1126 0.024277
4 ETW000 [dev trc ,00000] Thank You for using the SLODBC-interface 17 0.024294
4 ETW000 [dev trc ,00000] Using dynamic link library 'E:\usr\sap\DEV\SYS\exe\nuc\NTAMD64\dbmssslib.dll'
4 ETW000 39 0.024333
4 ETW000 [dev trc ,00000] dbmssslib.dll patch info 32 0.024365
4 ETW000 [dev trc ,00000] SAP patchlevel 0 12 0.024377
4 ETW000 [dev trc ,00000] SAP patchno 236 11 0.024388
4 ETW000 [dev trc ,00000] Last MSSQL DBSL patchlevel 0 13 0.024401
4 ETW000 [dev trc ,00000] Last MSSQL DBSL patchno 236 12 0.024413
4 ETW000 [dev trc ,00000] Last MSSQL DBSL patchcomment $DBCC() displays binary data as hex. string without 0x (1416409)
4 ETW000 21 0.024434
4 ETW000 [dev trc ,00000] lpc:(local) connection used on PTRESAPDEV 344 0.024778
4 ETW000 [dev trc ,00000] lpc:(local) connection used on PTRESAPDEV 102948 0.127726
4 ETW000 [dev trc ,00000] lpc:(local) connection used on PTRESAPDEV 12491 0.140217
4 ETW000 [dev trc ,00000] Driver: sqlncli10.dll Driver release: 10.00.2531 13539 0.153756
4 ETW000 [dev trc ,00000] GetDbRelease: 9.00.4035 1238 0.154994
4 ETW000 [dev trc ,00000] GetDbRelease: Got DB release numbers (9,0,4035) 59 0.155053
4 ETW000 [dev trc ,00000] The 7.00 (or earlier) ODBC based DBSL library should not be used for SAP systems running on SQL Server 2005 (release 9.0) or earlier.
4 ETW000 25 0.155078
4 ETW000 [dev trc ,00000] Please uninstall SQLNCLI 10 (SNAC10) on this application server.or set environment variable MSSQL_FORCEOLEDB.
4 ETW000 61 0.155139
4 ETW000 [dev trc ,00000] For more information please refer to SAP note 1082356 17 0.155156
4 ETW000 [dblink ,00433] ***LOG BY2=>sql error 0 performing CON [dblink#8 @ 433] 224 0.155380
4 ETW000 [dblink ,00433] ***LOG BY0=><message text not available> [dblink#8 @ 433] 19 0.155399
2EETW169 no connect possible: "DBMS = MSSQL --- SERVER = 'PTRESAPDEV' DBNAME = 'DEV'"

Why does Acrobat CC lag and jerk when reading pdf's?

Why does Acrobat lag and jerk when reading pdf's?

Thanks, But
3.4GHz i7, NV GTX 680MX 2GB card, 32GB DDR3 ram, 3tb Solid state/spin hybrid hard drive.
I don't think it lacks grunt.
Using big files in photoshop no problems.
The lag is less pronounced if single page is selected in page layout but the problen still exists. It just snaps from page to page and I can't scroll smoothly.
There is no option for 'hardware accelerated page display'
No problem scrolling pdf in a browser, only if the pdf file is downloaded into this computer.
The problem is in Acrobat.
any ideas

Error when testing SAP GUI for HTML

Hi experts,
i am getting the error "Service cannot be reached - the termination occured in system <sysid> with error code 403 and for the reason forbidden" when I test the service SAP GUI for HTML for transaction sicf. I am able to enter mit username and apssword und click login, and then iI get this error. Can anyone give me a hint?
Kind regards,
Simon

Hi,
Try publish all services on R/3, using SIAC_PUBLISH_ALL_INTERNAL transaction.
Hope this helps,
Iván.

Dispatcher status showing stopped when we start the sap.

Hi,
when i am starting the sap dispacher is getting stopped after 5 to 10 seconds.kindly see the log below and advise what might have gone wrong.
trc file: "dev_w1", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Oct 17 17:44:02 2008
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\INP\SYS\exe\run\dbmssslib.dll' ...
B Library 'E:\usr\sap\INP\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\INP\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.152)
B New connection 0 created
M sysno 00
M sid INP
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 175
M intno 20020600
M make: multithreaded, Unicode
M pid 4584
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 1 4584) [dpxxdisp.c 1162]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 30272 (1316)
M DpShMCreate: sizeof(tm_adm) 2969176 (14772)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (424)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 08060040, size: 3401424)
M DpShMCreate: allocated sys_adm at 08060040
M DpShMCreate: allocated wp_adm at 08061B88
M DpShMCreate: allocated tm_adm_list at 080691C8
M DpShMCreate: allocated tm_adm at 080691F0
M DpShMCreate: allocated wp_ca_adm at 0833E048
M DpShMCreate: allocated appc_ca_adm at 08343E08
M DpShMCreate: allocated comm_adm_list at 08345D48
M DpShMCreate: allocated comm_adm at 08345D60
M DpShMCreate: allocated vmc_adm_list at 0838CA30
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0838CA58
M DpShMCreate: allocated wall_adm at 0838CA60
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Oct 17 17:44:03 2008
M calling db_connect ...
C Thread ID:4876
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\INP\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 152
C patchcomment Connection check on (0,0) (988711)
C np:(local) connection used on TERHSAPDR01
C CopyLocalParameters: dbuser is 'inp'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 22822. hr: 0x8000ffff Login failed for user 'NT AUTHORITY\SYSTEM'.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 18456, sev 0), Login failed for user 'NT AUTHORITY\SYSTEM'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 22822. hr: 0x8000ffff Login failed for user 'NT AUTHORITY\SYSTEM'.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 18456, sev 0), Login failed for user 'NT AUTHORITY\SYSTEM'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 22822. hr: 0x8000ffff Login failed for user 'NT AUTHORITY\SYSTEM'.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 18456, sev 0), Login failed for user 'NT AUTHORITY\SYSTEM'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 22822. hr: 0x8000ffff Login failed for user 'NT AUTHORITY\SYSTEM'.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 18456, sev 0), Login failed for user 'NT AUTHORITY\SYSTEM'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 22822. hr: 0x8000ffff Login failed for user 'NT AUTHORITY\SYSTEM'.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 18456, sev 0), Login failed for user 'NT AUTHORITY\SYSTEM'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C OpenOledbConnection: line 22822. hr: 0x8000ffff Login failed for user 'NT AUTHORITY\SYSTEM'.
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 18456, sev 0), Login failed for user 'NT AUTHORITY\SYSTEM'.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 4060, sev 0), Cannot open database "INP" requested by the login. The login failed.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 22822]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#3 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1281]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9595]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server terhsapdr01_INP_00 on host terhsapdr01 (wp 1)
M * ERROR tskh_init: db_connect
M *
M * TIME Fri Oct 17 17:44:03 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9780
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Buffer TBX_SINGLE not available
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 4584) [dpnttool.c 357]
regards
anil

Hi,
This is related to user permission or password is wrong.
Pls check the user name and permission.
Regards,
Anil

Tool Button Not Working in Adobe Reader 9

Hello,
I have a custom tool button - folder level script (with a trusted function) to digitally sign a drawing template.
The tool button works in Reader 8 and Reader X, but is not working in Reader 9.
The error message is shown "Not Allowed Error: Security settings prevent access to this property or method".
Can any one please advise why this would not work in Reader 9 when the tool buttons work in other versions of Adobe Reader?
Thank you.

Adobe changes JS with every major release, check the Acrobat JS API Reference to see what has changed with regard to your code.
Without seeing your code, there is no way tell what is going on. Also check the preferences to see if there is an option that needs to be checked to allow your script to work.
Since Reader X works and it is free, why not upgrade?

Acrobat and Reader 8. When trying to print, the memory could not be "read".

A user (without local admin rights) does a batch job from Microstation and exports all of his drawings to pdf. They open just fine in Acrobat 8 and Reader 8. When he clicks on the print button, he gets the below error. When I log in with local admin rights, I can print those exact pdfs just fine. Below is the error message/event log entry.   Any help would be greatly appreciated.   He's running Windows XP SP3.
Event Type:        Information
Event Source:    Application Popup
Event Category:                None
Event ID:              26
Date:                     3/27/2012
Time:                     5:27:46 PM
User:                     N/A
Computer:          ************
Description:
Application popup: 2012-03-27 C6-01.pdf - Adobe Acrobat Professional: Acrobat.exe - Application Error : The instruction at "0x0436959a" referenced memory at "0x00000d28". The memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program

We tested with another non-admin account and Acrobat worked fine. Therefore the problem was within the user's profile. We just backed up his data, deleted his old profile and had him log back in. This created his new profile. Acrobat worked just fine.

Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row! What should I do?

Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
What should I do?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

New Toshiba PC with Acrobat Reader pre-installed. I installed Acrobat XI Standard. When opening a PDF, it opens in Reader. How do I get Standard to be the default?

New Toshiba PC with Acrobat Reader pre-installed. I installed Acrobat XI Standard. When opening a PDF, it opens in Reader. How do I get Standard to be the default?

right click a pdf>click open with>tick use as default and navigate to adobe acrobat xi, if it's not listed in the 'open with' panel.

Acrobat XI states file is read-only when trying to save

For the last couple of weeks I have had this issue . . . when saving to our shared drive, Acrobat XI states file is read-only (pop-up below) and I must save as a different name or in a different folder.
I must then save the file to a different folder or drive. No other Adobe product has this issue and it only occurs on our shared drive. IT states I have full permissions for the folder.
Anybody else have this issue?

I'm glad it was that easy, frankly! :-)
Glad it solved the problem for you!
Have a great day,
Sara

When reading my downloaded paper the Safari page sometimes comes up and I have to press the Home button and start all over again but same thing happens. I even made sure the the paper download was the first thing I did on my Ipad

When reading my downloaded paper the Safari page sometimes comes up and I have to press the Home button and start all over again but same thing happens. I even made sure the paper download was the first thing I did on my Ipad and that no other apps were open.

Have you tried a Reset (No Data will be Lost)
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Configure Acrobat Reader tool buttons when Reader is started inside SAP GUI

Similar Messages

Maybe you are looking for