Configure airport extreme with dsl modem

Need Help-I have a new DSL modem CenturyLink Q1000z, that is providing wireless to my home. I want to put it in bridge mode and use my aiport extreme base station(square one). Please explain how to configure it with aiport utility 6.0. I will need step by step as I cannot seem to find it in any forum. thanks

I have a new DSL modem CenturyLink Q1000z, that is providing wireless to my home. I want to put it in bridge mode
I suppose that it is possible that another CenturyLink user might have done this and will see this post...but at the same time it is also highly unlikely that this might occur.
Your best bet may be to refer to the Support Site for Centurylink for answers:
http://qwest.centurylink.com/internethelp/modems.html
Once you have the modem in Bridge Mode, you can configure the AirPort Extreme as follows using AirPort Utility 6.0:
Connect and Ethernet cable from the Centory Link modem to the WAN port (circle icon) on the AirPort Extreme
Open AirPort Utility 6.0
Click on Other AirPort Base Stations in the upper left hand corner of the window
Click on the AirPort Extreme
AirPort Utility will take a moment to analyze things and then suggest that you configure the AirPort Extreme to "Create a wireless network"
Edit the name of the Wireless Network and Base Station as you wish
Enter a Password and Confirm
Enter your user name and password for your provider's service
Leave the Service Name area completely blank
Set Connection to Always On
Click Next
When you see the message that AirPort Utility has configured your AirPort Extreme, click Done

Similar Messages

Connecting airport extreme, netgear dsl modem, windows 7, and Macbook pro

I'm having a problem connecting my airport extreme to my netgear modem, windows 7 pc and my Macbook Pro. Until a few days ago, I had a Westell wireless dsl modem and everything worked fine. Now, the only way I can connect to the internet is through my desktop pc and the hardwired modem.

If your goal is to extend/boost the range of your Netgear router with either or both of the AirPorts, this will not work wirelessly ... at least, not completely by wireless. That is because, WDS is not standard and each manufacturer has had creative license to implement it as they see fit for their products.
Instead, you have at least two other choices to use the Netgear (as the main Internet router) with the AirPorts:
Connect one AirPort directly to the Netgear by Ethernet, and then, configure both AirPorts for an extended wireless network. In this configuration, you would be running two separate wireless networks; one created by the Netgear, and the second the extended network created by the AirPorts.
Connect both AirPorts directly to the Netgear by Ethernet, and then, configure all of the routers for a roaming network. In this configuration, there would be a "single" wireless network where wireless network clients can literally roam from one router to another and still be on the "same" wireless network.

Can't configure Airport Extreme with IP 192.168.0.1 after software update

Hi there,
after updating my ax with utility software 5.3.1 and firmware 7.3.1. The software didn't allow the dhcp configuration to stay at IP range from 192.168.0.40 to 192.168.0.200
The message said that this is not a valid IP.
The configuration was working before without any problem.
After several tries I changed to 192.168.1.40 and 192.168.1.200. Now I was able to save the changes. And the airport is working well.
But I can't go back to 192.168.0
But I need to use 192.168.0 for a tunnel to connect to my wifes company.
Configuration:
Seperate Modem with DSL.
Connecting over PPPoE
Activeted WLan
Connected computers over Lan and Wlan
Can anybody help?
Thanx
Stephan

by-feet, Welcome to the discussion area!
AFAIK the AirPort Extreme base station (AEBS) has always forced the 3rd digit to be a 1 (one), as in x.y.1.z.
Could it be that you previously had the AEBS to operate as a bridge and your "modem" was actually suppling the IP addresses?

Bridge mode for airport extreme or dsl modem? Recomendations?

I'm upgrading to a 'blisteringly fast' 12 Mbps with my local DSL ISP (no cable in my area), and I'm thinking of changing out my
My current, antiquated setup is with a Speedstream 5200 Modem/Router (8 Mbps max) with a Linksys E1200 802.11n router. We have an Apple TV with HDMI into a stout Panasonic plasma, 2 Macs, 3 iPads (2xgen4 + mini), 3 5C iPhones and an old Dell Winbox (XP vintage that I will toss out) that access this configuration in a good-sized house (2 stories, ~4000 sq.ft.).
The Linksys 'n' speed router is somewhat adequate, but we want to do movie/video/music streaming to the AppleTV and we want to buy a new Mac (probably a Mac-mini to replace the Winbox). I also want to future-proof this setup for a few years, given the pain it usually is to do a wholesale swap-out like what I'm contemplating. I want to swap-out this pairing with:
a DSL modem/router to either a Netgear DM111PSP-100NAS (ADSL2+) or an older, but robust Actiontec GT-701D (or the newer -NF).
an Airport Extreme (802.11ac) to manage my Apple menagerie for fast streaming, and also to hang a poor man's network file storage off the USB port.
I'm asking for some recommendations from the community at-large so I can minimize the hassles when I do this swap-out. Which of the two devices (the modem/router or the AE router) should I put in bridge mode? Any performance penalties one way or another, or hidden gotchas?
Thanks in advance.
Craig

I'm back and wanted to put a coda on this thread.
First of all, many thanks to the recommendations by Tesserax and LaPastenague. You helped allay my fears in converting over to the Time Capsule environment.
The home network is working just great. Internal speed-ups all the way around. TC is working great as both a file server AND a Time Machine site. The Netgear DSL modem is the firewall and the DHCP server for my network. As stated in earlier posts, it has superior firewall capabilities compared to the Time Capsule. I configured the Time Capsule to Bridge Mode with my iPhone 5C, the configuration of which only took a couple of minutes. The speed between the 802.11 ac devices, my TC and the new Mac Mini, are unbelievably fast--on the order of 150+ Mbps at a distance of 40 feet or so through several walls--beamforming really does appear to work as advertised. That doesn't matter overall except for the Time Machine aspects, as my DSL line is a blisteringly fast 12 Mbps.
The only glitch I've had over the last 3 weeks was due to a short power outage, and the main problem was the networking with hard ethernet connection to the Time Capsule. I had to reboot the Netgear modem, as it was in a funky state, while other devices, such as my new Mac Mini, were waiting for the modem to vend a DHCP address. It turns out that the Apple TV had some persistence with its old DHCP-vended address, and the Mac Mini somehow received its IP address first--which conflicted with the Apple TV. Now, I'm not sure why the wirelessly networked Mac Mini beat the Apple TV to receiving a DHCP vending first, but it did, and the address persistence of the Apple TV created a conflict on the Apple TV network connection. Once I realized the problem, I shut down the Mac Mini and made sure all my other devices were off as well. I then restarted the entire network, the Apple TV received its IP address first, and all was well again. Granted, I could have disconnected the ethernet and allowed really fast wireless to the Apple TV, but it's only 4 feet away from the Time Capsule, so I might as well have the fastest pipe available for HD streaming to my large-format HD television.
The switchover was absolutely painless. Both the modem and the Time Capsule took, all total, about 10 minutes to set up and configure. Much easier than with Winboxes. Other than the Apple TV IP conflict after the power outage, it's been a real delight.
I'm very happy I switched to this new network configuration.

How do I set up Airport Extreme with cable modem and router?

Hi--
I'm having a house built and all of the wiring for TV, phone, and internet will be centralized in a closet. The cable modem can be placed there as well. In one room in the basement I want to use my Airport Extreme for my iMac and USB external hard drives. In another location of the basement, I'd like to set up a Time Capsule for another desktop and USB printer. If the cat5e comes out of the wall at each location, I "think" I need a router at the closet location. I also thought I might need an Airport Express upstairs on first or second floor to boost signal for my laptop. The house isn't that big so maybe that's overkill. So beyond the router question, do I want to set up a roaming network and have the Airport Express connected via ethernet or just wireless if the thought is that I need this? Finally, if I should connect cable modem to router to Airport Extreme, Time Capsule, etc., in what order and ports does the equipment get connected? Many thanks!!

Welcome to the discussions, Forum Girl!
It would be best to position the cable modem and main router in the central location like the closet if possible. The other devices would connect via ethernet to the wall jacks in each room.
If you could setup a "roaming" wireless network as you mention, this will give you better wireless performance and coverage. This is the way commercial establishments like airports, businesses, etc. are configured for wireless.
The order of connection would go something like this: ethernet connection > cable modem >main router>devices. Devices could be computers, routers, a backup device, etc. Since the Extreme has only 3 LAN ports for ethernet connections, you will also need to plan to install an "ethernet switch" near the location of the main router to provide enough ethernet jacks. If you are planning to use DirectTV, etc or your audio/video devices require ethernet connections (most new products do for updates and extra features), be sure to plan for that as well.
Make sure that CAT5e or CAT6 wiring is run so you will be able to take advantage of faster gigabit speeds.
Finally, it would be a good idea to work with an IT specialist to go over your plans to make sure all the bases are covered. This would be money well spent.

Problems setting up Airport Extreme with RCA Modem

Can't seem to get wireless working with my Airport Extreme. I have an RCA Modem (DHG535-2) through Comcast. I can get internet through Airport via ethernet, but only when the AEBS is in "Bridge" mode. I have tried unplugging, rebooting, etc., but nothing. The most common error message I'm getting is that the AEBS doesn't have a valid IP address. I'm pretty sure I should be selecting Use DHCP, but I'm not sure whether I need Share IP address, Distribute or Bridge. Also, when I connect via the ethernet, it looks like the IP address changes every time I reset the connection. Is this normal? I don't believe I have a unique IP address or else Comcast probably would have told me.
I've also tried resetting the AEBS to no avail. The modem does not have a typical reset button, but rather one called "REBOOT EMTA", which has kept me away from pushing it, ha! I'm very disappointed with the AEBS. I hardly ever have issues with Apple products. Any help would be greatly appreciated! Would hate to have to replace the Airport with my old blue Linksys router.

I'm not at home so I can't look at my own setup, but for my cable modem, I also have an RCA Modem (about two years old). I have it set to just get the IP address automatically, which it did the first time I plug in an Airport Express to it. I just upgraded to a Time Capsule, and all I had to do was turn the modem off and on, and it automatically works.
I would start over and try again.
Also, to reset my Airport Express to factory settings, it has a small button on the bottom that I just hit (with a tip of a pen) for five seconds and it resets. I would think the AEBS has something like that?
Good luck!

Airport extreme with new modem

Hi All,
We just got a new modem when upgrading our internet service, and it'll work directly plugged into our Mac (though it seems annoyingly slow at first glance) but not through the Airport Extreme. My husband tried just going through the set-up process again, but it didn't seem like anything needed to be changed. The green light is on on the Airport, but we got nothin' for the laptops, Roku, printer, etc. (or even the Mac it's connected to if we have the ethernet cable in the Airport). The modem says it's an Westell ADSL2+ router, and looking at a few discussions here, it seems that that means it's a "gateway" not a modem?? What does that mean for our setup? Please go easy on me--I'm not good at setting stuff up! Many, many thanks!

UPDATE: AT&T sent us the new modem with our internet upgrade and we assumed it was necessary to use it. I tried everything: unplugging both in a variety of combinations, resetting passwords, finally starting over with the Airport factory settings and doing the setup (in bridge mode) from scratch. Nothing worked. I had finally come to the conclusion that AT&T's modem does not support Airport and we would have to buy a router from them. (The Westell is labeled modem+router, but I was unable to figure out how to get wireless directly from it.) Finally, after speaking with someone from AT&T, my wife just said "Why don't we just try plugging in our old modem." And...voilà! Back in business.
Moral of story: just because they send you new equipment doesn't mean you need to use it.

Airport Expess with DSL Modem Router

I had a DSL Modem Router with 3 computers plugged into it via ethernet and was working fine. I then replaced one of my computers with a laptop so bought an AE and plugged it into an ethernet port on the DSL modem router. It worked fine for about 4 days then all three computers internet connections went down. I have got the two desktops working again with the AE disconnected but am worried that if i connect the AE again the same thing will happen. Is there any way that i can avoid this from happening? is this because i am doubling up the routing if you know what i mean?
MacBook Pro 17" Mac OS X (10.4.7)

First welcome to the discussions,
This isn't that uncommon, many of us expieriance drops in service and have to reset our systems.
There could be any number of reasons that cause this from a Power Spike to surges from power company, to storms from wind and lighting.
If you are lucky nothing gets fried and a simple reset will take care of the problem. Other times it can fry about any component and sometimes it's hard to find exqactly what is fried. If you are able to reset and get everything up and running again I wouldn't worry to much, I would consider a Battery Back-up to add to your Network to save your equipment though.
Cheers and Good Luck.
Don

How to configure airport extreme to work with Actiontec gt701d modem

I have been trying to set up a new Actiontec modem to work with a new Airport Extreme with no luck. I don't know what the right settings are to get it to work correctly. So far the only way I have been able to get the two to work together is to have the AE connect with ethernet and bridge mode. However with this configuration I can't setup a guest network which I would like to be able to do. I have read some past posts and have tried other configurations but end up either losing internet connection or getting a very slow connection. If anyone has some idea how to get this modem to work with the AE i would really appreciate some advice
Thank you

Welcome to the discussion area, Meagan!
The Actiontec "modem" that you mention is really a gateway...a combination modem/router, so with this device and the AirPort Extreme, you have two routers on the network.
Whenever you have two routers on a network, the first router must be configured to handle the main routing chores and any other routers must be configured in Bridge Mode to function correctly. So, Bridge Mode is the correct setting for the AirPort Extreme when used with the Actiontec gt701d gateway.
In order for the AirPort Extreme to provide a Guest Network, it must be configured as the "main" router on a network. This won't be possible unless you can re-configure the Actiontec device to act as a simple modem, not a router. You might want to check with Actiontec support to see whether this might be possible.
Message was edited by: Bob Timmons

How to connect to dsl airport extreme with built in modem

Hello everybody,
while we were tiding our cellar, i found an old airport extreme (a1034) with a built in modem, but i aint able to connect to my isp.
I looked throug the manual, but i didnt got answers there (maybe because of my poor english) . Is there a tutorial out there which tells me
how to connect to my isp?
Regards Floh
PS: again sorry for my poor english

If you try to set up the new AirPort Extreme with AirPort Utility 5.6.1, you will receive a notice that you need a more up to date version of AirPort Utility.
Nevertheless, AP 5.6.1 will allow you to set up the basics....wireless network name, password, etc.
It will appear that you can change other settings that are not found in more recent versions of AirPort Utility, but if you go in and check using a newer version of AirPort Utility, you will find that the settings that you thought you had made have not "stuck".
For example, you want to change the Radio Mode on the new Extreme and not use the Automatic setting. AP 5.6.1 will appear to let you do this. But, if you check the setting using a more recent version of AirPort Utility you will see that the setting is still set at "Automatic".
So, the bottom line here is that unless the newer version of AirPort Utility has the specific setting that you want to change, you will not be able to make that change.
Is there ANY chance, to set up my new "towers" with more
options, than the current Airport Utilities do offer?
Unfortunately, no.

Configuring a new Airport Extreme with an existing Wireless Modem Router

I have an existing Wireless Modem Router (brand: Riger) and have an existing wireless network. Recently purchased an AirPort.
What is the best way to install a new AirPort Extreme? I know i have to connect the AirPort Extreme to the modem via ethernet cable.
Do i allow the AirPort to use the existing setting from my old wireless modem router?
Or do i create a new network with different name and password?
Anybody can help or show me where i can look up on this?
Thanks

Hello akramaziz. Welcome to the Apple Discussions!
Since the new 802.11n AirPort Extreme Base Station (AEBSn) will be connected to the existing Wireless Modem Router by Ethernet, it should be reconfigured as a bridge.
(ref: AirPort Utility > Select the AEBSn > Manual Setup > Internet > Internet Connection > Connection Sharing = Off (Bridge Mode))
As a bridge, the AEBSn will allow the existing router to continue to provide both NAT & DHCP services for all network clients.

Trouble using Airport Express Base Station with DSL modem, Router and Hub

About 18 months ago, I had an Airport (802.11b) with WAN & LAN ports and modem hooked up to support two laptops, a Titanium Powerbook G4/600 and G3/400. The setup went from DSL modem -> Linksys router -> to Airport -> Hub (which had desktop and ethernet laser printer plugged in). The network worked fine.
Then, I got a G4 iBook to replace G3/400. Wanted to get 802.11g to support “g” Airport card in iBook. Got a Linksys 802.11g Wi-Fi with 4-port router for $50. Hooked it up directly with DSL modem. (Couldn’t get it to send out to hub). Hooked the desktop and ethernet laser printer into Linksys Wi-Fi/router. The only way I could use the printer was by having it be a shared printer from the desktop. This was often problematic.
Two months ago, I got a refurbished Airport Extreme Base Station. I can’t get the AEBS to interface directly with the DSL modem, so I hooked it up as follows:
DSL modem -> Linksys router -> to AEBS -> Hub. I plugged my Epson 820 (USB) into the AEBS and can see it to print to.
I have a static IP. That info is entered into Linksys router. Router set as Gateway, with DHCP enabled. AEBS is set to Connect using Ethernet, Configure using DHCP. Network setting: Distribute IP Addresses is unchecked.
Here’s my issue:
I can’t see the ethernet laser printer. It will occasionally flash available, but is gone in less than a minute. The printer is HP 2100 series.
Sometimes I can connect to the desktop G4 tower; most times I can’t.
I have checked and double-checked the cables.
Both the printer and desktop are connected to the Hub.
What can I do so that I can see the HP 2100 series printer and the G4 tower?

Don,
Thanks for the suggestions. Glutton for punishment that I am, I tried this again, “just for grins.“ The six other times I tried this, I couldn’t get the AEBS to “see” the Internet. And lo, this time it worked. Here’s the setup now:
DSL modem -> AEBS -> 4-port hub (which is connected to G4 tower and HP 2100 Ethernet printer). My USB Epson is connected to the AEBS, and I can print from the laptops. AEBS is set up: manual IP info, Network: distribute IP address; share a single IP using DHCP.
When I still couldn’t see the desktop G4 and the Ethernet HP 2100 connected via the hub (not), I got a flash. I had swapped out the cable a number of times to no avail. Then I realized, the hub is old and all the cables I was using are the new CAT5s. I dug out an old four-wire with RJ45 connectors that my husband made years ago (probably a cross-over cable). It was quite an effort as the cable is 30 ft. long and wrapped around the perimeter of the office behind desks and file cabinets, entwined with all the other wires. But I plugged it in and, Shazam! I am WORKING!
And, Don, thanks to you, I have eliminated the router from my gaggle of electronic boxes.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

Cannot configure Airport Extreme w/ modem...

I always get the configuration read error, whether connected via wifi or ethernet, on both my MacBook Pro and an iMac. It is one of the older dome extremes with a modem. Anybody know how I can get the stupid thing to communicate?

Ok, found the answer to my own question. It appears that Airport Utility 5.3.1 is not compatible with this base station, so you must use the older 4.2.5 Admin Utility found here:
http://www.apple.com/support/downloads/airportadminutilityforgraphiteandsnow425. html

Using Airport Extreme with Linksys Router/Modem

I was just told that my Mac mini is excruiatingly slow on the internet because I am using a Linksys router with Xfinity and that Airport Extreme will be much faster. And that I should plug Airport Extreme into the modem. When I checked, I don't have a separate modem. My Linksys is a combined router/modem. What should I do? Do I plug the Airport Extreme into the Linksys box, or do I get a completely different modem that is only a modem? And, if I plug Airport Extreme into the Linksys box, how do I configure the network for Airport Extreme, and what else do I need to do? All help greatlly appreciated...I can barely get onto the Apple website!

When I signed up with Xfinity one of the stipulations was that they would not install a router/modem but only a modem. I had heard of problems with their router/modem and I didn't want to go down that path.
I don't but you mighht be able to get them to change out your router/modem for a modem. I would start there by asking them.
Allan

Configure airport extreme with dsl modem

Similar Messages

Maybe you are looking for