Configure an excepcion for a host in an IPS4260

Hi guys!!
I need your help to know if it's possible to configure an excepcion for a specific host or ip address in an IPS 4260, I can do this in an AIP-SSM configuring an access-list, but I think it's different on an appliance.
Regards

Hi Luis,
An exception on IPS is called an event action filter, I was looking for a config example but instead I found this nice youtube video:
http://www.youtube.com/watch?v=Ho945eUSwbo
If you have a host that is firing a lot of false positives just select it as "attacker" and leave the signature range blank if you dont want to see any signature at all coming from this guy.
I hope this helps.
Raga

Similar Messages

OBIEE 11g - How to configure Virtual IP for servers hosting OBIEE 11g

Hi,
I have 2 Linux servers.
I have installed OBIEE 11.1.1.6 on first server and did a scale out on second server.
I don't have a Load Balancer.
I want to configure Virtual IP for these hosts.
Please advise how to do it.
Thanks
Nitin Aggarwal

Refer to below lhks.
http://www.rittmanmead.com/2008/12/obiee-high-availability-the-bi-server/
http://www.rittmanmead.com/2009/02/obiee-high-availability-presentation-services-and-scheduler/
Thanks
Jay.

Configure DNS on Snow Leopard Server for Web Hosting

Hi Everyone,
I put together an article on my blog about Snow Leopard DNS setup for web hosting. http://www.mkahn.com/?p=279
I'll be revising it over the next few weeks to make it more informative based around feedback. Let me know if you have any questions or trouble setting up DNS on Snow Leopard Server for web hosting.

Thanks for your replies. I realize I'm not making clear the way this network is configured . Also, the only services running on the Snow Leopard server are (at this time):
dhcpd - in the 10.136.31.x range;
dns - same as before;
planned to add are:
Open Directory (for network logins)
Software update;
Web (only on the 10.136.31.x Ethernet);
mySQL (localhost only - for moodle);
NAT is not set up on the Snow Leopard server itself. We have an outside router, a Cisco 2811. This router provides routing for both the public IP range, and the NAT range is configured in this router. The forwarding dns is located in LR and Fayetteville. So what I need is dns on Snow Leopard to forward outside queries to the state DNS servers, and resolve the local NAT IP only for Open Directory and a set of Snow Leopard clients.
Is this going to be possible?

Configuring default web apps for virtual hosts

Hi,
This posting is meant save time for anyone trying to specify a default web app
for each of their virtual hosts (as opposed to specifying a default web app for
each of their wl servers). This applies to weblogic 6.1, on NT. (I haven't tried
this on other platforms).
If you are trying to use the admin console to do this, give up. It's not possible.
The "Virtual Host/Configuration" window lets you specify everything about that
vhost configuration EXCEPT a default web app. (The "Default Web Application" drop
down menu will always have only one option to choose from: "none").
Instead, shutdown your server, and edit your domain's config.xml file manually.
Attached is an example config file that specifies that the web app "kz" should
be the default web app for the vhost "wl.kz.com", and that the web app "kahuna"
should be the default web app for the vhost "www.kahuna.com".
Hope this helps,
Brian O'Donnell
Lead Developer, Learning Network
[config.xml]

Hi,
Is it possible to configure default web appls for virtual hosts
with Weblogic 6.0 on NT platform? I tried to configure the configure.xml as Brian
did, it doesnot work. I am just wondering if there's any other possible way to
do this.
Thanks.
Mei
"Brian O'Donnell" <[email protected]> wrote:
>
>
>
Hi,
This posting is meant save time for anyone trying to specify a default
web app
for each of their virtual hosts (as opposed to specifying a default web
app for
each of their wl servers). This applies to weblogic 6.1, on NT. (I haven't
tried
this on other platforms).
If you are trying to use the admin console to do this, give up. It's
not possible.
The "Virtual Host/Configuration" window lets you specify everything about
that
vhost configuration EXCEPT a default web app. (The "Default Web Application"
drop
down menu will always have only one option to choose from: "none").
Instead, shutdown your server, and edit your domain's config.xml file
manually.
Attached is an example config file that specifies that the web app "kz"
should
be the default web app for the vhost "wl.kz.com", and that the web app
"kahuna"
should be the default web app for the vhost "www.kahuna.com".
Hope this helps,
Brian O'Donnell
Lead Developer, Learning Network

Configuring group policy for user profiles in Windows Server 2012 R2 Domain

Requesting some experts advise on configuring group policy for user profiles.
We will be building new Windows Server 2012 R2 Domain Controllers (Domain of 400 users).
The settings which I am concerned:
1. Folder Redirection: Desktop, Documents, Favorites.
2. Quota for Folder Redirection - 1 GB per user.
3. Map a networked drive - 1 GB per user.
4. Roaming profile - (Will ignore if it does not suit our requirement).
The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
FYI, E-mails hosted on MS Office365 and OST file size of few users more than 25GB. So, in case the user moves from one computer to other, the entire mailbox will be downloaded via internet. This consumes high bandwidth if more than 3-4 users shift per day.
Thanks a lot for your valuable time and efforts.

Hi,
>>The question is how outlook profile will be retained / automatically moved if the users move from once computer to other?
This depends on where our outlook data files are stored. If these data files are stored under
drive:\Users\<username>\AppData\Local, then these files can’t be redirected, for folder redirection can’t redirect appdata local or locallow.
However, regarding your question, we can refer to the following thread to find the solution.
Roam outlook profiles without roaming profiles
http://social.technet.microsoft.com/Forums/office/en-US/3908b8e0-8f44-4a34-8eb5-5a024df3463e/roam-outlook-profiles-without-roaming-profiles
In addition, regarding how to configure folder redirection, the following article can be referred to for more information.
Configuring Folder Redirection
http://technet.microsoft.com/library/cc786749.aspx
Hope it helps.
Best regards,
Frank Shen

Error : DB Mapping does not exist for the Host in iSetup

Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TEST
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
Thanks in advance,
Regards,
900076.

900076 wrote:
Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TESTIs this the complete/exact error message?
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
http://docs.oracle.com/cd/E18727_01/doc.121/e15842/toc.htm
Thanks,
Hussein

All of a sudden - Looking for PPPoE Host

Setup: I am connecting to the internet via Airport Express, through an ISP provided modem. I am using PPPoE as the protocol for connecting to my ISP.
Problem: The setup was working perfectly for me, when all of a sudden 5 days back, I got the ticker message on my taskbar "Looking for PPPoE host". I went through all the configurations using the airport admin and assistant utility. However, if I connect to the ISP provided modem through the ethernet cable using PPPoE, everything works perfectly. I have been tinkering with this for the past four days, and I have no clue as to what is wrong. For some unknown reason, the airport express base station cannot connect to the ISP (all of a sudden).Please help.
iBook G4 Mac OS X (10.4.5)
iBook G4 Mac OS X (10.4.3)

Hi,
I just got a brand new loaner Airport Express from a Friend. It came with the new Firmware and I used it on my ADSL Connection. (Modem to AE).
Then, one morning, I wake up and connnect my PowerBook to the system. It works fine. I leave for office, return with my Office laptop and install the Airpot Stuff on that too, to connect. Anyway long story short. All works well.
Now morning arrives again, and nothing working at all. I keep getting the "Looking for PPPoE " message and I know it got nothing to do with my new laptop as I have directly plugged my PB to the modem and it dials/connect without a porblem.
I checked the setting in the AE panel and thats fine too. I don;t know whats wrong or what to do. I've temporarely switched back to my NetGear Router until I can find out whats wrong with the AE.
Can you tell me how it's been for you? Were you able to solve the problem?
Rgds
Binu.

Strange info in "Bypass Proxy Settings for These Hosts and Domains"

For my Mac Mini my Network IP Address always has a self-assigned 169.254 number that I cannot change. Strangely, this same IP number is similar to info that is in the Proxies section (of Network Settings) under "Bypass Proxy Settings for These Hosts and Domains".
No matter what I do, this info (*,local, 169.254/16) appears in my Network Settings in the Proxies section under "Bypass Proxy Settings for These Hosts and Domains". (I tried removing the info and it would cause the "Configure Proxies" selection to default to "Always Use PAC File". Had to go back and retrash all the plist files to have Proxies go back to "Configure Proxies-Manually". Still, the info (*,local, 169.254/16) continues to appear in the "Bypass Proxy Settings for These Hosts and Domains" section and my IP address is always a 169.254 number.)
Comcast cable modem via direct hardwired Ethernet works fine with my other computer, so not the modem. Also, other computer does not have any info in the "Bypass Proxy Settings for These Hosts and Domains" section.
Installed a fresh copy of OS X 11.5 on a new hard drive. Still the same problem.
I posted this issue before but only got one responder and the problem still exists. Any clues? Somebody must know about this stuff. Help please.
Thanks

When your Mac wakes up, it does not yet have an IP Addresss. It wants to send a request to a Router for an apprpriste IP address to use now. But it needs to have an IP address (like a return address) to receive any messages. So, ... wait for it,
... it (your Mac) makes one up. There are rules that ensure it is a random address, but they always start with 169.254. It is on the same subnet with any low-order 16 bits This is the "self-assigned" range of IP Addresses. This address is only good for talking on a local network segment, for things like asking for a valid IP Address from a DHCP-enabled Router.
In most cases, on most networks, the 169.254 self-assigned IP Address is replaced by a valid Local IP Address such as 192.168.xxx yyy or 10.0.xxx.yyy so quickly that you never even see the 169.254 Address.
If you do see the 169.254 Address, it can be read as "Nobody will talk to me" or "Nobody will give me an IP Address". When you have this IP Address for more than an instant, you should suspect bad cables for Ethernet connections, bad signal strength or interference for wireless, Router configuration problems, or Mac configuration problems.
Mac configuration problems are often solved by using the "Assist Me" button is System Preferences > Network and choosing to set up again.
Another diagnostic is to try using Network Utility and the Ping function, and Ping-ing the address of your Airport base Station, often 192.168.0.1 or 10.0.0.1 or similar. This will tell you if the Router is reachable, or there are cabling/wirelss signal problems.
In this case, proxies are not an issue, and are simply a distraction from the real problems.

Can I open a port range in the firewall for one host?

Can I open a port range in the firewall for one host? In other words, I want to be able to open ports 54001 to 54050 to allow one remote host in my LAN to access that port range in my Mac Server. Is this possible? Currently, the only option I see is to open individual ports for all external hosts (eg http or https)
Thanks in advance!

Which version of OS X Server are you using?
Server 2.2 and earlier includes an interface to a software firewall that can be configured to open specific ports very easily. Descriptions of how to configure the firewall can be found in the documentation for these versions.
Server 3.x no longer has an interface to the software firewall - it is still there, but you need to use other methods do configure it. A popular example of such a method is the icefloor utility.
Apple suggest that for Server 3 you delegate firewall duties to an external router. Server 3 includes the ability to configure the firewall component of Apple Airport routers 'automatically'
if you connect a machine running Server 3 directly to an Airport Router the router appears in the LH pane in the Server.app window (usually second line, below the entry for the server itself), and you can control what services are 'enabled' through the firewall there.
a more common solution perhaps is to use a non-apple router, and configure the firewall (and so open specific ports) through whatever control interface is provided for that router. There are many many kinds of hardware router you could use, and the control interfaces used vary widely - so you will have to consulting the documentation for your own router to work out how to do this.
If you post information about your software versions, and hardware configuration, it is possible that you can get more specific help with the tasks involved in opening the ports.
Hope this helps.

Technical Monitoring for Logical host name

Dear experts,
We are in mid of technical monitoring finalisation.
one of the interesting thing which i found with respect to the logical host name, we installed SMD agent on Virtual host name and our system is not with HA environment and no clustering. It is just a system with single instance.
During the managed system configuration all the physical and logical host name reported by SMD autodiscovery, all went fine. But in Technical monitoring shows only virtual host name with the updated alerts , and logical host name only shows grey alert.
virtual host shows alert here
logical host name shows grey
how can i get alert displayed for logical host name too? do i need to do some settings at the OS level , could you guide us?
Thanks
Jansi

Hi Giri Raju Ayyagari,
I am sorry, seems you are still not able to get my issue, moreover you get diverting my issue
Here the problem is not at all related to agents on fly. thats the separate topic.
We are having issue on Logical Host names where there is no HA environment, means only One logical host name created.
I raised to SAP, l will update once the update from SAP given.
Best regards
Jansi

Configure an environment for apps for SharePoint (SharePoint 2013)

I am trying to follow the instructions in the article, "Configure an environment for apps for SharePoint (SharePoint 2013)". I have purchased an additional domain for the apps. However, in step 2 it says to create a CNAME from that domain to my
sharepoint domain.
Which site do I point the CNAME to? I have 2 host-named site collections for my application.

Since you say there are no dumb questions here goes:
I think my web server is IIS. If that is the case, I have 2 sites in IIS, the "Default" which is the WHS2011 remote login page and "SharePoint-80" which is the name of my SharePoint application. There is nothing in IIS that
has My internal server name.domain.XXX. There is a domain name that came with WHS2011 of XXX.homeserver.com (the "Default" site). I purchased a domain for my SharePoint site collections. Again, neither of these uses my internal server name so
I know I am missing something here.
Thanks

Failed to get IP address for Local Host (2) , OPMNCTL: opmn start failed

HI,
Hi, I have installed on Oracle 10g on Redhat Enterprise Linux V.2.1 . I was able to start OEM without any issues. Recently I had changed the static IP address and I couldn't able to start OPMNCTL and getting the following error while starting opmnctl start. error message is as follows.
Failed to get IP address for local host(2).....
Failed to get IP address for local host(2).....
Failed to get IP address for local host(2).....
my current configuration in /etc/hosts file is as follows.
127.0.0.1 localhost.localdomain servername
After going through some of threads available in Oracle, I have added the static IP address in the /etc/hosts but still I am getting the same error.
my new hosts file is as follows.
127.0.0.1 localhost.localdomain servername
10.21.253.102 localhost.localdomain servername
I don't know why this is looking for localhost (2). I did not set up any local host (2) and I could not see anything in my network confiuration also.
could you please help me in this issue? I appreciate your help in this regard.
Thanks
venkat

Hi, i think that the application server part is looking for a /etc/hosts entry
in this format:
127.0.0.1 localhost
As i noticed, this is used for internal communication.
Try this entry as is, without a domain...

Configuring RFC connections for load balancing.

Hi ,
We have the following landscape for our systems.
The database is installed on z/os , db2 (mainframe). The central services( SCS and ASCS) are also on the mainframe. So the message server is on mainframe.
The CI is on AIX and The DI is on AIX.
We have Logon groups configured and load balancing Configured and is RFC enabled.
1) When we connect to SAP using the SAPGUI and the portal connection is made to either CI or DI depending upon the best response times. Now recently we are running the mercury load testing, all the users are connecting to DI. Why are the users connecting to DI even though we have load balancing?
2) I have a system with SID BP0, with one CI and one DI. The logon group is BP0 and the message server name is cyrix. Now I have other another system EP0. I have created a RFC connection from EP0 to BP0. In SM59 I have selected the load balancing option, and provide the message server name, SID and logon group name. The connection does not work. If I connect directly to the CI or DI the connection works. Please tell me how can I configure load balancing for RFC connections.
Thanks
Manmath.

Dear 917996,
There are two types of load balancing:
- Client-side load balancing (setting up the tnsnames.ora on client side). More information here (http://ggsig.blogspot.co.uk/2012/04/client-side-
load-balancing-in-oracle.html). Very good video produced my friend Igor Melnikov is here (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/client/clientloadbalance_viewlet_swf.html)
-Server-side load balancing (remote_listener and setting service parameter clb_goal). Very good Igor Melnikov's video is here (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/server/serverloadbalance_viewlet_swf.html).
I have read about client side and server side load balancing. By editing tnsnames.ora I have enabled client side load balancing which is suppose to select listeners at random. then why does it only go to second node?Could you please show your tnsnames.ora on client?
Please can anyone help me to configure server side load balancing with SCAN. I have read many many post but couldn't find a clear answer.Based on your output (remote_listener string cmbtrnrac-scan:1521) you have already configured the server side load balancing.
SQL> show parameter listener
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=10.1
7.67.214)(PORT=1521))))
remote_listener string cmbtrnrac-scan:1521How many SCANs do you use? Do you use DNS?
regards,
Gennady

Configure:3955: checking for C compiler default output file name

Hi,
I am trying to configure oracle bsd on AIX and got the below error,
# sh /ldap/db-4.6.21.NC/dist/configure
checking build system type... powerpc-ibm-aix5.3.0.0
checking host system type... powerpc-ibm-aix5.3.0.0
checking if building in the top-level or dist directories... no
checking if --disable-cryptography option specified... no
checking if --disable-hash option specified... no
checking if --disable-mutexsupport option specified... no
checking if --disable-queue option specified... no
checking if --disable-replication option specified... no
checking if --disable-statistics option specified... no
checking if --disable-verify option specified... no
checking if --enable-compat185 option specified... no
checking if --enable-cxx option specified... no
checking if --enable-debug option specified... no
checking if --enable-debug_rop option specified... no
checking if --enable-debug_wop option specified... no
checking if --enable-diagnostic option specified... no
checking if --enable-dump185 option specified... no
checking if --enable-java option specified... no
checking if --enable-mingw option specified... no
checking if --enable-fine_grained_lock_manager option specified... no
checking if --enable-o_direct option specified... no
checking if --enable-posixmutexes option specified... no
checking if --enable-pthread_api option specified... no
checking if --enable-rpc option specified... no
checking if --enable-smallbuild option specified... no
checking if --enable-tcl option specified... no
checking if --enable-test option specified... no
checking if --enable-uimutexes option specified... no
checking if --enable-umrw option specified... no
checking if --with-mutex=MUTEX option specified... no
checking if --with-tcl=DIR option specified... no
checking if --with-uniquename=NAME option specified... no
checking for chmod... chmod
checking for cp... cp
checking for ln... ln
checking for mkdir... mkdir
checking for rm... rm
checking for sh... /usr/bin/sh
checking for a BSD-compatible install... /ldap/db-4.6.21.NC/dist/install-sh -c
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
and in config.log,
configure:3955: checking for C compiler default output file name
configure:3982: xlc_r -O2 -D_THREAD_SAFE -Wl,-brtl conftest.c >&5
/ldap/db-4.6.21.NC/dist/configure[3983]: xlc_r: not found
configure:3985: $? = 127
configure:4023: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "Berkeley DB"
| #define PACKAGE_TARNAME "db-4.6.21"
| #define PACKAGE_VERSION "4.6.21"
| #define PACKAGE_STRING "Berkeley DB 4.6.21"
| #define PACKAGE_BUGREPORT "Oracle Technology Network Berkeley DB forum"
| #define HAVE_UPGRADE_SUPPORT 1
| /* end confdefs.h. */
|
Is this beacase valid c compiler not existing?
# which cc
which: 0652-141 There is no cc in /usr/bin /etc /usr/sbin /usr/ucb /usr/bin/X11 /sbin /usr/java14/jre/bin /usr/java14/bin.
# ksh: which:: not found.
# which c
which: 0652-141 There is no c in /usr/bin /etc /usr/sbin /usr/ucb /usr/bin/X11 /sbin /usr/java14/jre/bin /usr/java14/bin.
Thanks,
Message was edited by:
GK Joe

Joe,
I presume you are trying to build Oracle BDB and not bsd as you have mentioned.
Yes, the error message you are getting is for not having the CC compiler in your system or the path isn't set. Check in the /usr/vac/bin directory if you have one in your system. You might find both xlc and cc compiler there. Set this directory to your path so that 'configure' can see it.
Regards,
-Debsubhra

RW-20004 no installs found for this host Error when installing Apps tier

Hello:
Trying to install 12.1.1 on a linux x64 OS. Following is my current OS Setup:
1) Have 2 Instances or RHEL 5 Update 4 x64 each named as follows: oalin12db.apps.local & oalin12mt.apps.local
2) Both have multi user setups as follows:
a) user: oracle (501), group dba (503)
b) user: applmgr (502), group dba (503)
3) Installation of DB node successful for a Vision Instance with SID=VISN
4) Getting error "RW-20004 no installs found for this host" on apps tier. Does not matter if I use host:SID:port or copy the actual config file over and point rapidwiz to it, I get the same error.
5) checked everything as per metalink notes 605677.1 and 444870.1.
6) SELinux on Permissive mode on both instances for now.
7) Installation stage directory is local to the DB instance and is setup as an nfs mount onto the apps tier.
Here's how my config_VISN.txt file looks.
<?xml version="1.0"?>
<oa_context version="$Revision: 120.5 $">
<oa_context_name oa_var="s_contextname">config.txt</oa_context_name>
<oa_context_serial oa_var="s_contextserial">0</oa_context_serial>
<oa_context_type oa_var="s_contexttype">Config File</oa_context_type>
<oa_context_file_loc oa_var="s_contextfile">/u01/oracle/VISN/db/tech_st/11.1.0/appsutil/conf_VISN.txt</oa_context_file_loc>
<ini_file>
[GENERAL]
CONFIGURED_ENVS=VISN
CONFIGURATION_FORMAT=12.0.0
ACTION_TYPE=INSTALLING
NUMBER_OF_HOSTS=2
HOSTNAMES={Server0_oalin12db,Server1_oalin12mt}
[Server0_oalin12db]
s_contextname=VISN_oalin12db
s_dbSid=VISN
s_dbport=1526
s_platform=LINUX_X86-64
s_base_lang=US
s_env_langs={American_English - US}
s_allprod={FND}
s_defterr=AMERICA
s_domainname=apps.local
s_isDB=YES
s_isAdmin=NO
s_isForms=NO
s_isConc=NO
s_isWeb=NO
s_port_pool=5
s_dbSidLower=visn
s_dbuser=oracle
s_apps_version=12.1.1
s_dbGlnam=VISN
s_dbseed=Vision Demo
s_dbtype=VISION
s_dbgroup=dba
s_dbcset=AL32UTF8
s_base=/u01/oracle/VISN
s_db_oh=/u01/oracle/VISN/db/tech_st/11.1.0
s_dbhome1=/u01/oracle/VISN/db/apps_st/data
s_dbhome2=/u01/oracle/VISN/db/apps_st/data
s_dbhome3=/u01/oracle/VISN/db/apps_st/data
s_dbhome4=/u01/oracle/VISN/db/apps_st/data
s_dbhost=oalin12db
s_bits=32
s_db_ons_localport=6300
s_db_ons_remoteport=6400
s_cmanport=1521
[Server1_oalin12mt]
s_contextname=VISN_oalin12mt
s_dbSid=VISN
s_dbport=1526
s_platform=LINUX_X86-64
s_base_lang=US
s_env_langs={American_English - US}
s_allprod={FND}
s_defterr=AMERICA
s_domainname=apps.local
s_dbdomain=apps.local
s_isDB=NO
s_isAdmin=YES
s_isForms=YES
s_isConc=YES
s_isWeb=YES
s_port_pool=5
s_formsfndtop=/u01/oracle/VISN/apps/apps_st/appl/fnd/12.0.0
s_dbSidLower=visn
s_dbuser=oracle
s_apps_version=12.1.1
s_base=/u01/oracle/VISN
s_inst_base=/u01/oracle/VISN/inst
s_config_home=/u01/oracle/VISN/inst/apps/VISN_oalin12mt
s_at=/u01/oracle/VISN/apps/apps_st/appl
s_at2=/u01/oracle/VISN/apps/apps_st/appl
s_at3=/u01/oracle/VISN/apps/apps_st/appl
s_at4=/u01/oracle/VISN/apps/apps_st/appl
s_tools_oh=/u01/oracle/VISN/apps/tech_st/10.1.2
s_weboh_oh=/u01/oracle/VISN/apps/tech_st/10.1.3
s_com=/u01/oracle/VISN/apps/apps_st/comn
s_javatop=/u01/oracle/VISN/apps/apps_st/comn/java/classes
s_temp=/u01/oracle/VISN/inst/apps/VISN_oalin12mt/temp
s_appsuser=applmgr
s_appsgroup=dba
s_at_cset=AL32UTF8
s_iana_cset=UTF-8
s_display=oalin12mt:0.0
s_dbhost=oalin12db
s_admhost=oalin12mt
s_formshost=oalin12mt
s_cphost=oalin12mt
s_webhost=oalin12mt
s_installedFrom=FS
s_root_status=enabled
s_web_entry_status=enabled
s_web_applications_status=enabled
s_batch_status=enabled
s_other_service_group_status=disabled
s_rpcport=1626
s_webssl_port=4443
s_ons_localport=6100
s_ons_remoteport=6200
s_ons_requestport=6500
s_webport=8000
s_active_webport=8000
s_formsport=9000
s_metdataport=9100
s_metreqport=9200
s_jtfuf_port=9300
s_mwaPortNo=10200-10205
s_mwaTelnetPortNo=10200,10202,10204
s_mwaDispatcherPort=10800
s_java_object_cache_port=12345
s_oacore_jms_portrange=23000-23004
s_forms_jms_portrange=23500-23504
s_home_jms_portrange=24000-24004
s_oafm_jms_portrange=24500-24504
s_oacore_ajp_portrange=21500-21504
s_forms_ajp_portrange=22000-22004
s_home_ajp_portrange=22500-22504
s_oafm_ajp_portrange=25000-25004
s_oacore_rmi_portrange=20000-20004
s_forms_rmi_portrange=20500-20504
s_home_rmi_portrange=21000-21004
s_oafm_rmi_portrange=25500-25504
</ini_file>
<config_section name="GENERAL">
<config_pair oa_var="CONFIGURED_ENVS">VISN</config_pair>
<config_pair oa_var="CONFIGURATION_FORMAT">12.0.0</config_pair>
<config_pair oa_var="ACTION_TYPE">INSTALLING</config_pair>
<config_pair oa_var="NUMBER_OF_HOSTS">2</config_pair>
<config_pair oa_var="HOSTNAMES">{Server0_oalin12db,Server1_oalin12mt}</config_pair>
</config_section>
<config_section name="Server0_oalin12db">
<config_pair oa_var="s_contextname">VISN_oalin12db</config_pair>
<config_pair oa_var="s_dbSid">VISN</config_pair>
<config_pair oa_var="s_dbport">1526</config_pair>
<config_pair oa_var="s_platform">LINUX_X86-64</config_pair>
<config_pair oa_var="s_base_lang">US</config_pair>
<config_pair oa_var="s_env_langs">{American_English - US}</config_pair>
<config_pair oa_var="s_allprod">{FND}</config_pair>
<config_pair oa_var="s_defterr">AMERICA</config_pair>
<config_pair oa_var="s_domainname">apps.local</config_pair>
<config_pair oa_var="s_isDB">YES</config_pair>
<config_pair oa_var="s_isAdmin">NO</config_pair>
<config_pair oa_var="s_isForms">NO</config_pair>
<config_pair oa_var="s_isConc">NO</config_pair>
<config_pair oa_var="s_isWeb">NO</config_pair>
<config_pair oa_var="s_port_pool">5</config_pair>
<config_pair oa_var="s_dbSidLower">visn</config_pair>
<config_pair oa_var="s_dbuser">oracle</config_pair>
<config_pair oa_var="s_apps_version">12.1.1</config_pair>
<config_pair oa_var="s_dbGlnam">VISN</config_pair>
<config_pair oa_var="s_dbseed">Vision Demo</config_pair>
<config_pair oa_var="s_dbtype">VISION</config_pair>
<config_pair oa_var="s_dbgroup">dba</config_pair>
<config_pair oa_var="s_dbcset">AL32UTF8</config_pair>
<config_pair oa_var="s_base">/u01/oracle/VISN</config_pair>
<config_pair oa_var="s_db_oh">/u01/oracle/VISN/db/tech_st/11.1.0</config_pair>
<config_pair oa_var="s_dbhome1">/u01/oracle/VISN/db/apps_st/data</config_pair>
<config_pair oa_var="s_dbhome2">/u01/oracle/VISN/db/apps_st/data</config_pair>
<config_pair oa_var="s_dbhome3">/u01/oracle/VISN/db/apps_st/data</config_pair>
<config_pair oa_var="s_dbhome4">/u01/oracle/VISN/db/apps_st/data</config_pair>
<config_pair oa_var="s_dbhost">oalin12db</config_pair>
<config_pair oa_var="s_bits">32</config_pair>
<config_pair oa_var="s_db_ons_localport">6300</config_pair>
<config_pair oa_var="s_db_ons_remoteport">6400</config_pair>
<config_pair oa_var="s_cmanport">1521</config_pair>
</config_section>
<config_section name="Server1_oalin12mt">
<config_pair oa_var="s_contextname">VISN_oalin12mt</config_pair>
<config_pair oa_var="s_dbSid">VISN</config_pair>
<config_pair oa_var="s_dbport">1526</config_pair>
<config_pair oa_var="s_platform">LINUX_X86-64</config_pair>
<config_pair oa_var="s_base_lang">US</config_pair>
<config_pair oa_var="s_env_langs">{American_English - US}</config_pair>
<config_pair oa_var="s_allprod">{FND}</config_pair>
<config_pair oa_var="s_defterr">AMERICA</config_pair>
<config_pair oa_var="s_domainname">apps.local</config_pair>
<config_pair oa_var="s_dbdomain">apps.local</config_pair>
<config_pair oa_var="s_isDB">NO</config_pair>
<config_pair oa_var="s_isAdmin">YES</config_pair>
<config_pair oa_var="s_isForms">YES</config_pair>
<config_pair oa_var="s_isConc">YES</config_pair>
<config_pair oa_var="s_isWeb">YES</config_pair>
<config_pair oa_var="s_port_pool">5</config_pair>
<config_pair oa_var="s_formsfndtop">/u01/oracle/VISN/apps/apps_st/appl/fnd/12.0.0</config_pair>
<config_pair oa_var="s_dbSidLower">visn</config_pair>
<config_pair oa_var="s_dbuser">oracle</config_pair>
<config_pair oa_var="s_apps_version">12.1.1</config_pair>
<config_pair oa_var="s_base">/u01/oracle/VISN</config_pair>
<config_pair oa_var="s_inst_base">/u01/oracle/VISN/inst</config_pair>
<config_pair oa_var="s_config_home">/u01/oracle/VISN/inst/apps/VISN_oalin12mt</config_pair>
<config_pair oa_var="s_at">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
<config_pair oa_var="s_at2">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
<config_pair oa_var="s_at3">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
<config_pair oa_var="s_at4">/u01/oracle/VISN/apps/apps_st/appl</config_pair>
<config_pair oa_var="s_tools_oh">/u01/oracle/VISN/apps/tech_st/10.1.2</config_pair>
<config_pair oa_var="s_weboh_oh">/u01/oracle/VISN/apps/tech_st/10.1.3</config_pair>
<config_pair oa_var="s_com">/u01/oracle/VISN/apps/apps_st/comn</config_pair>
<config_pair oa_var="s_javatop">/u01/oracle/VISN/apps/apps_st/comn/java/classes</config_pair>
<config_pair oa_var="s_temp">/u01/oracle/VISN/inst/apps/VISN_oalin12mt/temp</config_pair>
<config_pair oa_var="s_appsuser">applmgr</config_pair>
<config_pair oa_var="s_appsgroup">dba</config_pair>
<config_pair oa_var="s_at_cset">AL32UTF8</config_pair>
<config_pair oa_var="s_iana_cset">UTF-8</config_pair>
<config_pair oa_var="s_display">oalin12mt:0.0</config_pair>
<config_pair oa_var="s_dbhost">oalin12db</config_pair>
<config_pair oa_var="s_admhost">oalin12mt</config_pair>
<config_pair oa_var="s_formshost">oalin12mt</config_pair>
<config_pair oa_var="s_cphost">oalin12mt</config_pair>
<config_pair oa_var="s_webhost">oalin12mt</config_pair>
<config_pair oa_var="s_installedFrom">FS</config_pair>
<config_pair oa_var="s_root_status">enabled</config_pair>
<config_pair oa_var="s_web_entry_status">enabled</config_pair>
<config_pair oa_var="s_web_applications_status">enabled</config_pair>
<config_pair oa_var="s_batch_status">enabled</config_pair>
<config_pair oa_var="s_other_service_group_status">disabled</config_pair>
<config_pair oa_var="s_rpcport">1626</config_pair>
<config_pair oa_var="s_webssl_port">4443</config_pair>
<config_pair oa_var="s_ons_localport">6100</config_pair>
<config_pair oa_var="s_ons_remoteport">6200</config_pair>
<config_pair oa_var="s_ons_requestport">6500</config_pair>
<config_pair oa_var="s_webport">8000</config_pair>
<config_pair oa_var="s_active_webport">8000</config_pair>
<config_pair oa_var="s_formsport">9000</config_pair>
<config_pair oa_var="s_metdataport">9100</config_pair>
<config_pair oa_var="s_metreqport">9200</config_pair>
<config_pair oa_var="s_jtfuf_port">9300</config_pair>
<config_pair oa_var="s_mwaPortNo">10200-10205</config_pair>
<config_pair oa_var="s_mwaTelnetPortNo">10200,10202,10204</config_pair>
<config_pair oa_var="s_mwaDispatcherPort">10800</config_pair>
<config_pair oa_var="s_java_object_cache_port">12345</config_pair>
<config_pair oa_var="s_oacore_jms_portrange">23000-23004</config_pair>
<config_pair oa_var="s_forms_jms_portrange">23500-23504</config_pair>
<config_pair oa_var="s_home_jms_portrange">24000-24004</config_pair>
<config_pair oa_var="s_oafm_jms_portrange">24500-24504</config_pair>
<config_pair oa_var="s_oacore_ajp_portrange">21500-21504</config_pair>
<config_pair oa_var="s_forms_ajp_portrange">22000-22004</config_pair>
<config_pair oa_var="s_home_ajp_portrange">22500-22504</config_pair>
<config_pair oa_var="s_oafm_ajp_portrange">25000-25004</config_pair>
<config_pair oa_var="s_oacore_rmi_portrange">20000-20004</config_pair>
<config_pair oa_var="s_forms_rmi_portrange">20500-20504</config_pair>
<config_pair oa_var="s_home_rmi_portrange">21000-21004</config_pair>
<config_pair oa_var="s_oafm_rmi_portrange">25500-25504</config_pair>
</config_section>
</oa_context>

Here's the log:
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 12.1.1.9
>> Install session started : Thu Nov 05 11:10:16 EST 2009
>> Rapid Wizard source location : /u02/apps/StageR12/startCD/Disk1/rapidwiz
>> Command Line arguments for this run :
=================================================================
Install Session Information
Host Name : oalin12mt.apps.local
Host Operating System : Linux x86-64 (64-bit)
User running Install : root
=================================================================
InstUpgPanel
     User action : Install Oracle Applications
     Install type : Standard Install
Disabling OCM Configuration
InstallPanel
     User action : Load configuration
     Description : Loads an already existing configuration.
          Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@16b9e62
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@1694eca
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
     User action : Load configuration
     Description : Loads an already existing configuration.
          Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@170984c
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@1c220eb
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
     User action : Load configuration
     Description : Loads an already existing configuration.
          Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@b41166
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@103d246
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
     User action : Load configuration
     Description : Loads an already existing configuration.
          Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@19c9f16
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@1e7d503
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
     User action : Load configuration
     Description : Loads an already existing configuration.
          Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@287b58
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@95c5ec
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml
InstallPanel
     User action : Load configuration
     Description : Loads an already existing configuration.
          Setting temp directory to: /u02/apps
Reading configuration from: /u02/apps/conf_VISN.txt
Reading config file for oalin12db at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 1 oracle.apps.ad.util.PortPool@1f89785
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxdbctx.tmp
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
instantiate file:
source : /tmp/tmpoalin12db_VISN_db.xml
dest : /tmp/tmpoalin12db_VISN_db.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
Reading config file for oalin12mt at /u02/apps/conf_VISN.txt
SID set to: VISN
OS set to: LINUX_X86-64
Loading context... null 2 oracle.apps.ad.util.PortPool@109dcbb
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
setOCMValues : IN
setOCMValues : OCM saved values exist: oalin12db
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OCM saved values exist: oalin12mt
setOCMValues : s_metalink_id -
setOCMValues : s_mysupport_pwd -
setOCMValues : OUT
instantiate file:
source : /u02/apps/StageR12/startCD/Disk1/rapidwiz/etc/adxmlctx.tmp
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
instantiate file:
source : /tmp/tmpoalin12mt_VISN_apps.xml
dest : /tmp/tmpoalin12mt_VISN_apps.xml
Unable to write context file: /u02/apps/oalin12mt_VISN_apps.xml

Configure an excepcion for a host in an IPS4260

Similar Messages

Maybe you are looking for