Configure application web server deshabilitado LV2014

Hola, estoy teniendo problemas para usar el web publishing tool, ya que me deja publicar en el explorador pero sólo en modo snapshot o monitor, si lo pongo en embedded se queda según descargando y nunca se carga. Quiero agregar que he usado esta herramienta varios años seguidos, y ya he utilizado las opciones de solución que he encontrado. Noto que en ésta ocasión al entrar a Tools>> Options>> Web server, el botón de Configure Application Web Server se encuentra deshabilitado, he checado el silverlight está instalado y actualizado, he instalado LabVIEW runtime browser plug in, tanto para 32 como para 64 bits.
Las diferencias que tengo con años anteriores son: Laptop de 64 bits (antes tenía de 32) y LabVIEW 2014 (con 2013 funcionaba bien).
Agradecería si alguien se ha topado con éste error y lo ha solucionado me dijera cómo puedo hacerlo. De antemano gracias por su atención.

Saludos Crystal71,
Gracias por utilizar los foros de discusión de National Instruments, me gustaría corroborar si has consultado y seguido el siguiente documento:
Web Publishing Tool Using Embedded Viewing Mode and Default HTTP Port Fails to Load:
http://digital.ni.com/public.nsf/allkb/983366C0ED1A91A68625765500542FD0?OpenDocument
Quedo al pendiente de tus comentarios, saludos.
David P.
National Instruments
Applications Engineer
www.ni.com/soporte

Similar Messages

How to configure single web server instance to multiple application servers..

Hi all,
we are running single instance of IWS6.0 SP2 on solaris, we want to comfigure this single instance to multiple application servers(JRun). Can any one advise me whether it is possible to do.
Thanks
Raj

Hi Raj,
"how to configure single web server instance to multiple application servers.."
It's not possible for setting up multiple applicataion servers for Single iWS instance.
Thanks,
Dakshin.

Configuration Iplanet web server 6.1 to SunOne Application Server 7

Hi,
Does anybody know how to configure url forwarding from web server to application server?
I'm trying with url forwarding, but it doesn't work with post method.
I found articules talking about this problem, but not resolution, well, I found a note about "web connector plugin" but I don�t know how to see if, it was installed and , if it isn't, how to install and configure.
Web Server version is 6.1 and Application Server is 7
Thanks in advance
Thanks

Thanks,
I modified magnus.conf and obj.conf. I was followed instructions but when I try to access, I get an error 500.
My web server is listening on port 82 and my appserver is listening on port 4849.
web server: http://sunesma3:82
app server: http://sunesma3:4849/otic
I send magnus.conf and obj.conf
MAGNUS.CONF
# The NetsiteRoot, ServerName, and ServerID directives are DEPRECATED.
# They will not be supported in future releases of the Web Server.
NetsiteRoot /disco10/iplanet61
ServerName ObsMAP
ServerID https-ObsMAP
RqThrottle 128
DNS off
Security off
PidLog /disco10/iplanet61/https-ObsMAP/logs/pid
User root
StackSize 131072
TempDir /tmp/https-ObsMAP-b676d73f
Init fn=flex-init access="$accesslog" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%
\" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length%"
Init fn="load-modules" shlib="/disco10/iplanet61/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"
Init fn="load-modules" shlib="/disco10/iplanet61/plugins/passthrough/bin/libpassthrough.so" funcs="init-passthrough,auth-passthrough
,check-passthrough,service-passthrough" NativeThread="no"
Init fn="init-passthrough"
OBJ.CONF
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
<Object name="passthrough">
ObjectType fn="force-type" type="magnus-internal/passthrough"
PathCheck fn="deny-existence" path "*/WEB-INF/*"
Service type="magnus-internal/passthrough" fn="service-passthrough" servers="http://sunesma3:4849"
</Object>
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="ntrans-j2ee" name="j2ee"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/disco10/iplanet61/ns-icons" name="es-internal"
NameTrans fn=assign-name" from="/*" name=passthrough"
NameTrans fn="document-root" root="$docroot"
PathCheck fn="unix-uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index" index-names="index.jsp,index.html,home.html,index.jsp"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD)" type="magnus-internal/imagemap" fn="imagemap"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="index-common"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
Service method="TRACE" fn="service-trace"
Error fn="error-j2ee"
AddLog fn="flex-log" name="access"
</Object>
<Object name="j2ee">
ObjectType fn="force-type" type="text/html"
Service fn="service-j2ee" method="*"
</Object>
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn="send-cgi" user="$user" group="$group" chroot="$chroot" dir="$dir" nice="$nice"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="send-compressed">
PathCheck fn="find-compressed"
</Object>
<Object name="compress-on-demand">
Output fn="insert-filter" filter="http-compression"
</Object>

Configure Oracle Applications Web Server

Could anyone guide me in how to configure Oracle applicaions to be accessed via INTERNET & what's the requirements to make this cometrue??????, i'll appericate anyhelp.
Thnx

Hi,
To configure Oracle Applications Web Server on what is your Oracle Apps version?
If you can get back to with required info will be able to solve your problems.
Thanks and Regards
Riyas
Oracle Applications DBA
Kuwait

NI Application Web Server refuses to be enabled

I'm trying to deploy a web service made in LabVIEW 2010 and it fails to deploy saying that the NI Application Web service is not running....
So I connect to http://localhost:3580, login as Admin (blank password) and click the web servers page. There I set the port of the Application Web Server to 8080, click the enable checkbox...and hit the apply button - and the only thing that happens is that the browser shows the Error on page symbol in its status bar....There is no "Yes" showing next to the Enable checkbox like for the system web server...
So - if I start from scratch again and do the same, but also click the 32 bit radio button prior to hitting the apply button - what happens? Well, then I get an error dialog:
The service itself (32bit, the 64 bit is listed but not as started) is running according to the services control panel...
I'm stuck....So do anyone know what's missing here, is there something I'm doing wrong, or something that needs to be done prior to activating the application service?
MTO
Solved!
Go to Solution.

Uninstalling and reinstalling 32 bit LabVIEW 2010 on two different machines revealed that the problem only showed up on my 64 bit Vista macine - not the 32 bit Windows 7 macine...
Looking at the services running on the machine with the problem I could see that it was running the 32 bit version of the Web application server, had a 64 bit installed but set to disabled....- but - only the latter was set to depend on the NI Web server service. This looked a bit strange as the 32 bit version on the 32 bit machine was dependant on the NI Web Server....
So - I disabled the 32 bit NI Web Application server service, enabled the 64 bit...and voila - I am now able to configure the Web Application Server to start.
So why is both the 32 and 64 bit Web application services installed, with only the 32 bit one running - but not properly? Is this what happens to everyone, but everyone fixes it by switching to the 64 bit version...or is there something that causes the installation to get messed up?
MTO

Discoverer Portlet Provider, No Response from Application Web Server

I must have some odd configurable incorrect. I hope one of you can help me out and point me in the right direction.
My issue involves the "Discoverer List of Worksheets" portlet. It will display all the workbooks and I can drill in and see the worksheets, but, when I click/choose a worksheet, it will return within a couple seconds and display "No Response from Application Web Server" in bold red letters, then "There was no response from application ...", then "Please notify the site's webmaster ...". I have spent the day trying to lock down a log on the http server, j2ee, web cache and used enterprise manager to see logs which changed immediately after the error but didn't seem to find much.
What am I missing? Is there a timeout somewhere? Does it look like I missed something when I configured anything?
Below are the configurables and answers to some of the obvious questions.
Thanks,
BC
Windows 2003 sp1
App Server 10.1.2.2.0
Discoverer 10.1.2.54.25
ssl -> no
sso -> yes
provider registration:
http ://luke.xxx.com/discoverer/portletprovider (actual does not have a space after "http")
"cookie domain" not checked
"user has the same identity ..."
user/session --> "once per user session"
from web cache log:
10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_sam
ewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F157&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NA
ME_241292&vw_partitionid=241292&&vw_return_url=eNrLKC ... 4hUQ%3D%3D HTTP/1.1" 302 1909 "6959909483946,0"
10.2.2.226 - - [18/Jul/2007:18:17:37 -0700] "GET /osso_login_success?urlc=v1.4~534 ... 774851DD HTTP/1.1" 503 40
2 "6959909483946,0"
from middle tier http server log:
10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_sam
ewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F157&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NA
ME_241292&vw_partitionid=241292&&vw_return_url=eNrLKCk ... a4hUQ%3D%3D HTTP/1.1" 302 1921
from infrastructure http server log:
10.2.2.226 - - [18/Jul/2007:18:17:33 -0700] "GET /pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=v1.4~BFE8 ... HTTP/1.1" 302 4998
url being passed from provider:
http ://luke.xxx.com/discoverer/portletprovider/viewer?event=openWorksheetForPortal&vw_allowsaving=false&vw_samewindow=false&vw_wspath=WS_INVOICE_DETAIL%2F1048&vw_connkey=cf_a101&vw_portletid=0&vw_instanceid=152576_DEFAULT_LIST_OF_WORKSHEETS_PORTLET_NAME_241292&vw_partitionid=241292&&vw_return_url=eNr ... 1z9AEA6Dsegw%3D%3D
url that returns:
http ://luke.xxx.com/osso_login_success?urlc=v1.4~0C549F ... 3E94
the rest should be obvious:
Processes in Instance: rc_luke_mt1_instance.luke.xxx.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 5352 | Alive
OC4J | home | 2764 | Alive
OC4J | OC4J_Portal | 2452 | Alive
OC4J | OC4J_BI_Forms | 3644 | Alive
WebCache | WebCache | 5372 | Alive
WebCache | WebCacheAdmin | 2608 | Alive
HTTP_Server | HTTP_Server | 5204 | Alive
Discoverer | ServicesStatus | 5860 | Alive
Discoverer | PreferenceServer | 5580 | Alive
wireless | performance_server | 5216 | Alive
wireless | messaging_server | 4872 | Alive
wireless | OC4J_Wireless | 6116 | Alive
DSA | DSA | N/A | Down
Processes in Instance: rc_luke_infra1_instance.luke.xxx.com
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 2768 | Alive
OC4J | oca | 2312 | Alive
OC4J | OC4J_SECURITY | 5348 | Alive
HTTP_Server | HTTP_Server | 3036 | Alive
DSA | DSA | N/A | Down
OID | OID | 2492 | Alive
Congratulations! You have successfully reached your Provider's Test Page.
Recognizing Portlets...
default_gauges_portlet_name
default_worksheet_portlet_name
default_list_of_worksheets_portlet_name
Recognizing initialization parameters...
oracle.portal.log.LogLevel : 7
Recognizing component versions...
ptlshare.jar version: 10.1.2.0.2
pdkjava.jar version: 10.1.2.0.0

hi,
i also got the same error on my IE when i want to run VPE Workbench 5.6
the error :
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.
The error came up after i update the windows server (restart server), before that everything is running fine and ok.
I dont know where the problem is. Is it because the update? or Application Server?
I try to login to WEB CACHE MANAGER with the user/password default, but i still cant login.

No Response from Application Web Server - j2ee when running a long report

Using Oracle Application server, 10.1.2 and a j2ee application which uses Oracle Reports to create pdf report output.
When a report takes 5 mins or more to be produced, the following error message occurs, ending the session. The report request however does continue to run, and the pdf is eventually
produced on the server, but the user cannot retrieve it. So I know the report server is still going after getting this error:
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.
I'm assuming this is a timeout setting in a configuration file, but where?
Thx,
Tim

Hi Tim,
Take Backup of httpd.conf from Oracle_home2(midtier)
Now Edit httpd.conf, set timeout 1200 ie 20 mins (this depends on you how much time u need to set Note: Values are in seconds)
Now restart entire Mid tier
Then run the report again.
Regards
Fabian

Problem in configuring Apache Web Server v2.2

Hi,
I am facing problem in configuring apache web server with tomcat 7.0. I want to configure the web server in such a way that I can access the application only using the localhost(without appending the port to it). Ex I want to access the application through "http://localhost" instead of "http://localhost:8080".
I tried to configure it using the concept of vertical clustering and "load balancer", but failed to do that.
Can anyone please tell me steps to configure apache web server with tomcat or provide any useful link / urls to do that one.
Thanks in advance

The only way you can achieve it is by running the web server to listen on port 80
Please change the port in your httpd.conf file for the webserver and restart it.
If any other processes are running/using on port 80 on that machine, then please stop them, otherwise you will not be able to achieve your requirement.
Arun

Step by Step of how to Install and configure the Web Server Core 2008 R2

I encoutred a couple of problems installing a Web Server Core 2008 R2 edition including the remote connection and for people who are encountring the error :
"The WinRM client cannot complete the operation within the time specified" or the error : " Could not connect to the specified
computer. Details: Unable to connect to the remote server " I think those couple of video will be helpfull,
so I decided to record and share this experience with you by producing the server core from A to Z to avoid the headache that I encountred
during my experience. The lab environment is vmware but you can use hyper v or even physical lab if you want as the steps are the
same
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

Hi MASNSN,
Thanks for your sharing =)

Configure Apache Web Server in WLP 8.1

Hi,
pls let me know, how to configure Apache Web Server with WLP 8.1
Thanks,
Natesh.

U need to have mod_wl_20.so and some changes in httpd.config.
Here are the changes
1) change the servername to webserver host
2) Change the serveradmin to webserver host
3) include mod_wl_20.so into load config modules.
and some more.
There should be good in internet regarding this.

How to configure LabVIEW web server to allow viewing and accessing the content of a folders

I have added the following html line to the body of the html file generated by the LabVIEW Web Publishing Tool:
<a href="MyFolder" target="_blank">My Folder Content</a>
I expect the link labeled "My Folder Content" to open a new browser window displaying the content of "Myfolder" which is located inside the LabVIEW webserver root folder. I got an error instead. If I substitute "Myfolder" with a filename, the browser will display the file just fine.
Can someone provide me with some hints on configuring the web server for this purpose?

Hola Hector
Estoy trabajando con tu caso y se me ha hecho bastante interesante.
Solo te quiero preguntar... que version de Internet Explorer tienes?
Utilizas algun otro web server ? ( Mozilla tiene este problema me parece)
Segui los pasos que mencionas con Internet Explorer 6
y pude abrir la carpeta sin problemas.
Te pido por favor que me contestes estos datos para darte una solucion muy especifica.
lamentablemente tengas que hacer referencia directa ( todo el path) a los archivos del folder para accesar a ellos si tu explorador no lo permite.
Lo unico que puedo confirmarte es que parece no ser un problema de National Instruments.
sin embargo si me das mas informacion podemos descartar cualquiera de las conclusiones a las que he llegado.
Espero tu respuesta
Saludos
Erwin Franz R.

Calendar Page displays No Response from Application Web Server

Hi there,
I have OCS 9.0.4 on a linux ES 2.1 box (single box install). The installation went fine without any errors. When I click the Oracle Calendar Administrator link on the OCS welcome page and sign on using SSO, I get "No Response from Application Web Server.
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later. " Any ideas what is wrong ? The calendar server started without any errors (and I restarted HTTP on the midtier). Also, when I access the calendar page thru "http://midtier:7778/ocas-bin/ocas.fcgi?sub=web", only orclguest can login successfully. Every other user gets "Calendar Server connection error. Contact your Administrator" .
I appreciate every help.

Hi!
Try the following:
a) go to the midtier:port/um/admin/UMAdminLogin.uix and log in as UMADMIN with the password you specified during the installation
b) create a mail user (one that already has an account in the OIDDAS)
c) give that mail user the domain admin right
d) logout
e) login to the collab suite main page (midtier:port/pls/portal) with this user
f) you should see the collaboration suite portlets
g) go to messages
h) click on the administration tab
i) go to calendar admin
j) create a calendar account for this user
Hope this helps
cu
Andreas

No Response from Application Web Server

Hi,
I have problem to open my web conference page from Oracle Colaboration Page in Quicklinks. I will get "No Response from Application Web Server" whenever i click on Web Conferens link.

hi,
i also got the same error on my IE when i want to run VPE Workbench 5.6
the error :
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.
The error came up after i update the windows server (restart server), before that everything is running fine and ok.
I dont know where the problem is. Is it because the update? or Application Server?
I try to login to WEB CACHE MANAGER with the user/password default, but i still cant login.

Error "No Response from Application Web Server"

Hi folks,
When i'm trying to access the database through grid contorl... i'm getting the following error... Any ideas to resolve it?
No Response from Application Web Server
There was no response from the application web server for the page you requested.
Please notify the site's webmaster and try your request again later.

Hello,
Is it possible that not all of your iAS services are started ?
Try to run $ORACLE_HOME/opmn/bin/opmnctl status -l
to see if for example the Http server process is down...
If it is down, then restart it up with the command :
opmnctl startproc ias-component=HTTP_Server
(same for any other mid-tier process).
Hope this can help you.
Steff

How to -- Manually Configuring a Web Server? I am able to install web/applications servers on windows NT, there is no clear documentation on above topic.

refer to /iplanet/ias6/ias/docs/admin/adplugin.html, --To Reconfigure an iPlanet Web Server
How to view/modify connection between web server and application server..?

What version you want to install.
Refer this link or to download this PDF/HTML files.
http://docs.iplanet.com/docs/manuals/ias/60/install/install.htm#998205

Configure application web server deshabilitado LV2014

Similar Messages

Maybe you are looking for