Configure audio output graph date and time

How do I configure labview to correctly identify the two circles below?
Attachments:
audiowave.png ‏63 KB

Attachments:
Untitled.jpg ‏42 KB

Similar Messages

WLC date and time configuration

Hi, I have a problem with a 4402 Wireless LAN Controller running 7.0.116.0 versión. The equipment is working fine, but after a hard reset i lost date and time
configuration.No other configuration is affected, only date and time. What can be the cause of this?

Hi Leo, mabuti naman po ako. Ikaw kumusta? You can speak tagalog pala. << OT.
WLC don't have NTP configured because they don't have NTP server. Anyway, I must agree with you in terms of unstable power source here in Philippines, but in this case, the client datacenter do have redundant UPS standing-by incase power interruption occurs. Actually, my client have 2x 5508 sitting side by side. The other one is working properly because we tried them to switch off and then unplugged the power cord from power source. When we plugged it again and they boot up, one WLC retains its clock and date but the other one reverts to January 1, 2000.
I think we better request for an RMA for this unit.

CRYSTAL REPORT GRAPH WITH DATE AND TIME

Post Author: Dino Dentone
CA Forum: Charts and Graphs
Dear forum,
I am developing a Visual Studio .net 2005 Windows Form,i have a sql table with 2 field:1) DATA (date and time)2) Temperatura (numeric)I have to make a line graph with numeric data axes.I have insert two parameters' to customize the filtering, so i can have a graph of the temperature between to date and time.If i choose two date's and time (parameters) like 20/04/2008 00:00:00 trought 20/05/2008 00:00:00 i have no problemBut if a choose a range minor of 1 day (some hours like from 15/05/2008 00:00:00 trought 15/05/2008 08:00:00) i have no graph.It sound like it don't use the time values?Thank's for the Help.

There is some debugging info on the website. I've had problems getting the text to work. It was generally that I installed either the wrong 'version' of ImageMagick (the recommended one works for me--I'm running Vista x64 and one time installed the x64 version and it didn't work). I also installed Ghostscript to get the font list to work correctly. At one time I installed the x64 version of Ghostscript and it didn't work with the plug-in, either.
I installed two items:
ImageMagick: ImageMagick-6.4.9-3-Q16-windows-dll.exe
Ghostscript: gs863w32.exe
I don't know if it is necessary but I also added the fonts from
ghostscript-fonts-std-8.11.tar.gz to the c:\Program Files (x86)\gs\fonts directory. Some, none, perhaps all, may already be installed just by installing ghostscript--it has been so long that I don't remember exactly. I do know that the contents of the gs fonts directory contains all the files in the .gz, I just don't remember if I put them there separately or as part of the gs install :)
You need to make sure the font size is large enough. I usually use about 2-4% of height and export a single photo to make sure I see the text correctly.
Tim does respond to email when he can so if you can't get it to work you can always drop him a line.

My configuration audio "output" is only numerique and I would like listen to audio by integrated loudspeaker. I can't use the keys "sound on my computer. If I click on I have a icon "forbiden". Can you help me

my configuration audio "output" is only numerique and I would like listen to audio by integrated loudspeaker. I can't use the keys "sound on my computer. If I click on I have a icon "forbiden". Can you help me

Si vous tappez sûr le cle <<option>> et cliquez vôtre souris de l'icon de haut-parleur
de le haut partie de sa Desktop, vous pouvez voir les choix pour le son: les haut-parleurs internales, Line out et Digital Out. C'est tout ! Ou cliquez de la Pomme a gauche, choissisez Préferences, et Son, et voila..... le meme chose.....
Merci d'avoir choisi Apple
John B

Cisco SPA525g2 Date and time Not Synced with the PBX server

Hello,
We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1 extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
How can we make the phone sync the date and time with the PBx server?
Any input and help regarding this issue is greatly appreciated...
Btw, date and time issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
Thank you very much,

PeterMacSF,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Insert date and time into write to spreadsheet

Easy question here
I need save 4 arrays of data and insert the date and time that it was taken (LV 8.6)
for example
9/4/09 10:00:01 AM 4 6 7 2
9/4/09 10:00:02 AM 4 6 7 2
9/4/09 10:00:03 AM 4 6 7 2
9/4/09 10:00:04 AM 4 6 7 2
Any ideas, I can't wire the timestamp or date/time string right into the create array
Thanks
Chris
Solved!
Go to Solution.

Ok
the basic problem that I see is the the LabVIEW TimeStamp type is a cluster. Converting it to a dbl gives you a value in seconds elapsed since 1904 Jan 1 12:00AM GMT and, your spreadsheet cannot interprate that (or display that) as a "TIME." So, you want to convert it to a string (easy TS->String check the help for format options) BUT, you might want to pass all of your data as numbers into your spreadsheet so you can post-calculate or graph other outputs vs. TIME! This little chunk of code .....
converts a LV Timestamp to a number that Excel interperates as "the amount of days elapsed since 0 Jan 1900 @ 12:00AM LOCAL." You will need to format the cell in Excel to display it as a date-time But it can be operated on and graphed against with only Excel's limitations (Excel followed the Lotus bug of erroneously assuming 1900 was a leap year, and Leap seconds are unrecognized)
Enjoy!
Message Edited by Jeff Bohrer on 08-06-2009 02:28 PM
Jeff

Work Status Report Date and Time Setting

Hi all
We are running BPC10 on servers configured with Central European Time which is currently 2 hours ahead of GMT allowing for Daylight Savings Time.
From what i can see in BPC10 date and times are now stored in GMT (Zulu time) in the Audit activity tables so when a user updates the work status at say 11:00AM local CET time then a value of 09:00AM GMT is stored in the Audit Activity Header table.
We have a report in excel that uses the EVLCK formula and will return the correct value of 11:00 am however if we run the Work Status Audit report on the Planning and Consolidation home page with user preferences set to Central European Time +1 then the time is displayed as 10:00am suggesting that daylight savings time is not accounted for. We need to set the time to Eastern European time +2 hours to display the correct figure.
Can anyone explain why this happens? Has DST been overlooked?
Rgds
Alan

Hi Alan,
probably it's a bug, I think it's better you open an OSS message to SAP.
Regards
Roberto

Can't remotely connect to my server if I automatically set date and time

Hello.
I have configured my OS X 10.6.2 server and am able to remotely manage it.
The only ports I have opened on my router is for Mail and VPN services.
Things work perfectly because I can connect using VPN to iChat, iCal, Address Book, Server Admin, Workgroup Manager, AFP, FTP and such.
The problem is that on my laptop from home, or wherever, if its time is set to update automatically from an NTP server (I have tried with Apple's as well as my server for the NTP Servers) then I cannot connect to my server at all...
The moment I turn off the auto date and time and reconnect to the office's VPN, I am able to use Server Admin, AFP, FTP, Workgroup Manager, Screen Sharing, etc, etc, etc.
It's utterly frustrating because I have to open system preferences, disable the automatic date and time update, connect to the VPN and do stuff on the server. Then I have to disconnect from VPN and re enable the auto date and time.
Could someone explain why this is happening and any possible solutions I might be able to try?
Thanks in advance,
Felipe.

OK, after some testing things seem to be working now.
I opened the NTP port for my server (So I don't have to be on VPN to update the time)....But regardless of that, Server admin and my corporate site work fine.
Here is my problem, I don't understand why it's working now when 30 minutes ago I was having trouble connecting to my server regardless of what NTP Server I used.
The only service I can't access is Workgroup Manager, but I don't know if that is supposed to be accessible only locally (though it doesn't matter since I can screen share but I would still like to know).
Thanks in advance,
Felipe.

Microsoft Date and Time Picker Control 6.0 (SP6) errors

One of our functioning VBA projects in Outlook 2010, running under Windows 7 Professional (64-bit), unexpectedly stopped functioning a few months ago. When running the VBA macro we started receiving the compile error message:
"Object library invalid or contains references to object definitions that could not be found"
PROBLEM FORM CONTROL: The message was extremely frustrating because it gave no detailed indication of the source of the problem. With a little research, however, we found that the
Microsoft Date and Time Picker Control 6.0 (SP6), on a userform accessed by the macro, was generating the error. A number of older articles, such as the one included below, indicated that we needed
to re-register the MSCOMCT2.OCX form control, which we did successfully (as did the original author in his question link below). Unfortunately, as the original author found, simply re-registering the form control did not resolve the problem.
UNRESOLVED QUESTIONS:
1. Does anyone know why this functioning control would unexpectedly cease to function?
2. Can anyone help us restore the functionality of the 'Microsoft Date and Time Picker Control 6.0 (SP6)'?
3. How come the form control is listed in the object library, is available in the 'Additional Controls' dialog, and can be inserted into a form, without any indication that it is broken?
SUPPORT ENGINEER RUN-AROUND: Another frustration is that a responding support engineer, in the prior article, keeps referring the author back to this forum, yet the question is apparently never answered back here in
the TechNet forum (which ironically refers us back to the original article in the other forum - a game of musical chairs!).
We suspect that the solution to this problem may be similar to resolving this issue for other similar form controls in other Office 2010 application, not just Outlook. After several years, and a myriad questions on the internet regarding
this exact subject, is there someone who can definitively resolve this issue with this control?
Thank you for any help.
LINK TO THE ORIGINAL UNANSWERED QUESTION (i.e., regarding the MSCOMCT2.OCX control and reference back to this forum):
http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/ms-date-and-time-picker-contol-60-sp-6-w-excel/9b0cc596-5e13-48bc-b03e-13dbfd1c7f9d

Hi,
Would you like to tell me your Excel version number (Go to Account>About Excel). I tested in my version :15.0.4569.1504 and the Date and Time Picker Control 6.0 still could be used.
Then,>> My PC is 64 bit. I believe my version of Office is also 64 bit.<< Office 2013 32 bit also could be installed in 64bit operation system. We could check it with Account>About Excel.
Next, as you said >>After I exited 'Design Mode,' it started working again. I tested it, along with my 'Clear Form' button multiple times. It seemed to be working fine. I closed the document and reopened it. Enabled Macros.
When I tried to use it after reopen, it doesn't work again.<<
I recommend we recreate a new blank Excel file and insert the Date and Time Picker Control 6.0 to test.
If it still does not work well, please try to reinstall and re-registry it. Follow the link:
https://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar
https://social.msdn.microsoft.com/Forums/en-US/91cf3127-70fe-4726-8a27-31b8964430c5/registering-mscomct2ocx-in-64-bit-windows-7?forum=sbappdev
If it works well, I suppose this issue is related to macros. I recommend you post the question to MSDN forum to debug them:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Printing date and time in all pages

hi frds
i wants to display or print system date and time in every pages can anyone give me coding .
by
Pari Vendhan.R

Hi Pari,
Please write the system date and time in TOP-OF-PAGE event so that it will be printed in each page of output.
Example:
report zdatetime
line-count 60.
START-OF-SELECTION.
*-- write your code here
TOP-OF-PAGE:
write: 'Date: ', sy-datum.
write: / ' Time: ', sy-uzeit.
In top of page write other details along with date and time. Here in the above declaration after each 60 lines a new page will be triggered and TOP-OF-PAGE will be called for each page before first write statement.
Regards,
Yellappa.

Incrementing a string number for date and time

There are probably a lot of ways to do this, but I only want to use a bunch of if - else loops if I really need to.
I have a date and time for input, let's say 2006-04-19 22:00. In Java, if I convert that to 3 integers (year, month, day), it will output 2006-4-19. I need to be able to increment in a loop for every day and month from one date to the next. If I keep it as a string, I won't be able to increment the value though, (at least I'm not sure how). I'm thinking that even if I converted it to an integer and back to a string, that the leading zero would be removed.
I found a post here that said something about formatting the number with 2 numbers, by using:
DecimalFormat format = new DecimalFormat("00");
format.format(1, sb, new FieldPosition(0));
Or is there a way to use the gregorianCalendar stuff that would output the date with all of the zeros in place, while incrementing and looping correctly?
Thanks.

I would get a Date object--you can use java.text.SimpleDateFormat if you're starting with a String--and use that to create a GregorianCalendar. Then you can just call Calendar's add method to add one to whichever field you want. Use the SimpleDateFormat to turn the date back into a String for display again.
Calculating Java dates: Take the time to learn how to create and use dates
Working in Java time: Learn the basics of calculating elapsed time in Java
Formatting a Date Using a Custom Format
Parsing a Date Using a Custom Format

Get-Hotfix InstalledOn property not returning hotfix installed Date and Time on Windows Server 2008 SP2 but works on Windows Server 2008 R2 SP1

Hi,
I am working on a validation script to get the list of hotfixes installed on Domain Controllers every month as part of our monthly DC patching process. I have been successful in getting these details for DC's with (Windows Server 2008
R2 SP1, Powershell v2.0) using the below command.
Get-HotFix -cn $computer | Select-Object PSComputerName,HotFixID,Description,InstalledBy,InstalledOn | where InstalledOn -ge (Get-Date -Day 1 -Format d) | FT -AutoSize
I execute the above from a jump box with powershell v4.0 (Server 2008 R2)
However, when I try the same command from the jump box to query DC's with (Server 2008 SP2, powershell v2.0). It doesn't return the InstalledOn date and time. It was giving error for the InstalledOn property and hence I renamed it to $_.InstalledOn. Now
I don't get error but still no details displayed for InstalledOn property.
I tried using the below, as could see on few forums that this might resolve the issue. I also tried removing the "where" part but still no installation date returned.
Get-HotFix -cn $computer | Select-Object HotFixID, Description, InstalledBy, @{l="InstalledOn";e={[DateTime]::Parse($_.psbase.properties["installedon"].value,$([System.Globalization.CultureInfo]::GetCultureInfo("en-US")))}}
| where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize
Have tried this locally on the 2008 SP2 DC but still not working. Please advise what is going wrong?
Note: If I execute the below command locally on the 2008 SP2 DC, I am getting the InstalledOn output. However, when executed from the jump box with powershell v4.0 (Server 2008 R2) to query
the same 2008 SP2 DC, it just gives the prompt again without any error or output. This behavior is consistent for other 2008 SP2 DC's in the environment.
Get-HotFix -cn $computer | Select-Object HotfixID,Description,InstalledBy,InstalledOn | where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize

Hi jrv, I have already tried the Win32_QuickFixEngineering option, which doesn't work either. Apologies for not mentioning the workarounds that I have already tried.
Get-Hotfix seems to be just a wrapper for Win32_QuickFixEngineering as per the below article. (http://technet.microsoft.com/en-us/library/hh849836.aspx)
I have seen a mention of using the WU ActiveX control on few forums, but was too lazy to read it through.
After rigorous testing, it makes me realize that somewhere the Get-Hotfix dates formatting\comparison isn't working.

How to display the current Date and time in xslt version 1

i am using xslt version 1 .i want to display the current date and time in the output xml using xslt(Jdeveloper) ..i just added the namespace xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:ns1="urn:oracle:integration:b2b:7D30046DC68A4FA689956D8241FA3B99">
and used thsi function <xsl:value-of select = "xp20:current-date()"/>
but it does not works for me ..help needed????
Edited by: user9519185 on Jan 20, 2009 3:04 AM

Use a formula: =NOW()
Format the cell for Date and Time, with both the Date part and the Time part displayed. Format the two parts as you wish, using the choices in the Inspector's menus.
The cell will update each time the table is recalculated.
(Description is for Numbers '09 (Mac), Numbers for iOS will be similar, but not necessarly identical in details.)
Regards,
Barry

Get-Content and add Date and Time in a new file

Hello,
in a existing file I have data like:
1;Idle
5;chrome
1;spoolsv
Now I need to grab the content and add date and time in front of each line and save it to another file like:
07.04.2015;10:18;1;Idle
07.04.2015;10:18;5;chrome
07.04.2015;10:18;1;spoolsv
But I don't have any idea how I could solve this challange. Does anyone have a helping hand for me?
Greetings

Hello,
If you need a new file with the desired output try this
get-content .\current.txt | Foreach-Object{ $dntv = (get-date) ; "$dntv" + $_} | Out-File newfile.txt
regards,
V
Venu

Date and Time Sync at boot for Active Directory/Open Directory Authenticati

All the macs in my school district are set to automatically sync their time with a network time server. They do not do this unless the system preference is opened. This poses a problem as all our users must authenticate against an Active Directory and an Open Directory server. If the time is out of sync they can not login, and therefore can not fix the time. I must then login in with a local admin account set the time and then the network account can login. I have tried using direct IP addresses for the NTP server. That doesn't work either. I have adjusted the tolerance of the AD server to accept a large discrepancy in time (did not work). Set the users to be mobile accounst (local home folders), did not work. The only fix will be to ensure that the time does sync at boot, before login. Is there a way to force the computer to sync at boot to a given NTP server, prior to the login window appearing?

I have come up with my own solution for this issue. It is a two part solution. We found that the computers are experiencing time drift and that after they get out of sync by 5 minutes they can no longer login. One would think that the setting in the Date and Time system preference to automatically synchronize the time would take care of this. That however is not the case that check mark does not affect the ntp service at all. It merely eliminates the need to click a button when entering the system preference. How did we discover this? well that is part of the solution. We used webmin (http://www.webmin.com) to look at the ntp configuration. No matter what changes we made with the Date & Time preferences nothing changed in the system ntp settings. So on to the solution: Install webmin, and configure the ntp protocol manually to sync at your desired interval (I did hourly). This stops time drift. Next create a startup item and associated plist to force time sync at boot (be sure to loop it as different machines initialize their network cards slower). I have made ours available for download (http://www.manheimcentral.org/~getzt/netTime.zip). I hope this helps others. We have found that this works fairly well.

Configure audio output graph date and time

Similar Messages

Maybe you are looking for