Configure backup link

My customer needs to have backup lines for their branch offices. They have installed on each branch office a router (RV042 or TL ER6120 or ASA5505), on each branch office are installed 2 fiber optic transceiver from diferent ISPs. At headquarter they have installed a cisco 892FSP. 892 WAN1 interface is connected to a layer 3 switch (on that switch are connected many Patch cords connected to many ONTs), WAN2 is connected to a catalyst 2960 switch with a SFP connected. Customer needs to have backup link between headquarter and branch offices. Can anyone help on cisco 892 configuration please?

Hi
Your connectivity/setup is not clear however if your query is to configure backup data link you can follow the below link for details:
http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/backup_ps9572_TSD_Products_Configuration_Guide_Chapter.html#wp1015543
If you still have query please share your topology.
Thanks & Regards
Sandeep

Similar Messages

Configuration requried for 4 port ISDN S/T Interface card as backup link

Dear All,
I have ISDN BRI 4 lines Interface card installed in my company router cisco 2821, I want to configure all 4 BRI lines as an backup link of 512Kbps with same ISP which is directly connected on Serial0/2/0 with 1mbps bandwidth. If my Serial link become down. ALL 4 BRI group dail same ISP with full loaded 512kbps bandwith link.
Router IOS detail c2800nm-ipbasek9-mz.124-15.T5.bin
and I have no idea how to impelement in real senerio.
if any one using same senerio in his live enviroment please send me configration....!
waiting you reply....

Respected Sir,
Thanks for your advise. But This is very helpfull forum of cisco where cisco highly professional persons help their juniors sitting allaround the world, therefore as a junior I have posted my problem here someone give me guide line. How to configure it...?
Because no one is perfect in whole world everyone is trying to learn more and more in his field, so this is my humbly request if you looking into this matter and help me out.
I will be very thankfull to you.
regards

User privilege level for configuration backup with PI 1.2

We have more than 50 devices handling by PI 1.2 (testing) I like to know how to do configuration archiving with user who doesn't have write privilege.
I tried like this.
username john privilege 6 password cisco
privilege exec level 6 show running-config
(result) show run --> blank
I tried this user with one of switch in PI 1.2. It did not do configuration backup
username inout password inout
username inout privilege 15 autocommand show running-config
(result) once logged in, it automatically showed running-config. However when I tried with PI 1.2 with this user (inout). I couldn't do configuration back.
reference
http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml
so, my question is this. what is the solution for me to create certain user with read-only privilege while PI 1.2 is able to do configuration archiving ?
thanks in advance

7.4 MSE code will in fact require an update of Prime 1.2 to 1.3.0.20-
It's pretty easy though and your licenses will still work from the Prime Infra side.
Here's a link to upgrade PI to 1.3
http://www.cisco.com/en/US/partner/docs/net_mgmt/prime/infrastructure/1.3/release/notes/cpi_rn_13.html#wp73605
I personally would go ahead with the upgrade of both:::

Root bridge and Non rootbridge as backup link (point to Point)

I want to use 2 APs as backup link. I want to be sure that this wireless link is working fine as a backup.
In order to avoid loops, Should I set any specific configuration in both APs?

Follow the URl for the configuration of the Backup Controllers which may help you :
http://www.cisco.com/en/US/docs/wireless/controller/5.1/configuration/guide/c51lwap.html#wp1249029

Failover ISDN backup link

I have situation where half of my network is connected with one central location and other half with second central location. Every router is connected with primary frame-relay link and ISDN as backup link (floating static route conf).
I need to configure that in case backup link can't manage to connect with one central location start connection with second central location. Failover ISDN backup link. Any sugestions? Thanks

Configure the two numbers under dialer interface. These will be tried in sequence, and in fact if things are configured properly it will be no problem if some branches are connected to primary hub and some to secondary.
Hope this helps, please rate post if it does!

Can't find the storage and backup link to start an icloud backup

Why is it that when you create an icloud account the Storage and Backup link isn't always there. I need to create an icloud account and then create an icloud backup right away so that I can setup multiple ipads using the icloud backup. How do I force an icloud backup?
Thanks

You can check your Junk/Spam folders, sometimes the e-mail gets sent there. Also, double check that the primary e-mail address in your Apple ID account is hers. If none of this works, I suggest to wait it out, sometimes it can take up to 24 hours!

How to configure a link in my page which should navigates to new webpage

Hi ,
Iam using Jdev 11g(11.1.2.0.0)
My scenario is like i need to configure a link in my page. If i click that link , it should navigates me to another web page.
Please tell me how to configure the URL to which it has to be navigated on clicking the link.
Thanks in advance

I assume that you are using adf rich faces. In this case you use an af:goLink and give the whole URL as you would type it in the browser as the 'destination' property select '_blank' as 'TargetFrame' to open a new window...
Timo

Wiki file attachments - can the wiki be configured to link to a file already on the server rather than uploading it into the page?

Can the wiki be configured to link to a file already on the server rather than uploading it into the page? This would enable users to open (and edit) the original server hosted document rather than downloading a static copy that can't be edited and synced back into the wiki page.
As a workaround I've tried attaching an alias to a file but it doesn't work - the wiki instead uploads the aliased file.
From what I can work out, the default wiki behaviour is to upload a document to a wiki page, which creates a copy of the uploaded document in the wiki database. This copy has no connection to the original document. It can be downloaded and edited, but the edits are not saved back into the wiki hosted version of the document.
I'd like to be able to upload a link or alias to a document (with preview please!) already on the server. A user could then preview the document or click to open and edit it.
The only way I can do this at the moment is to create a link "afp://123.../doc.rtf" to the original. This is timeconsuming and confusing for non-technical users and doesn't offer the benefits of the attach function (ie document preview).
Is there any way the wiki can be configured to link to documents already on the server using the attach functionality?

An update for anyone in a similar situation.
Patch 3944727 for 9.0.4.1 that solves this issue: "USER LOV IASM11SHIP EDIT USER LOV SHOULD SHOW THE NICKNAME ATTRIBUTE." However, the patch is mutually exclusive with the latest CPU's and there's no plan to merge the pacthes given the dwindling support for 9.0.4.1. So that patch is pretty much worthless.
I've been told that this patch is included in newer portal versions, so the real solution is an upgrade.
Trenton

Configuring Backups in Enterprise Manager 10.2.0.2.0

Hello,
I am trying to configure backups in Enterprise Manager. Whenever I try to provide the host credentials, I receive the following:
"Connection to host as user Administrator failed: ERROR: Wrong
password for user"
This machine is a primary domain controller, and therfore has no local accounts. All accounts are through the domain via Active Directory. I came across a plug-in for Enterprise Manager for AD, but it is only for Windows Server 2003. Since I cannot authenticate locally for host credentials, how would I work around this in order to setup a backup schedule? Thanks.
Neal A. Ferguson
[email protected]

Thanks for the reply. Unfortunately, this did not seem to resolve the issue, as I still received the error message when attempting to provide the Administrator's credentials. I also added the domain admin to the Log on locally option, but this did nothing as well. Is there something else that I need to put in to the fields when attempting to set up a backup job?

Cisco Prime Infra 2.2 + Third Party Inventory and configuration backup

Hi All,
I am having a doubt related to Cisco prime solution capability to do a discovery and config backup for non-cisco devices.
Requirement is to use Cisco prime to do a discovery, inventory and take configuration backup for non-cisco devices. Is it something possible out of the box ?
If not possible out of the box, is there any method to do that using any custom API ?
Can we monitor 3rd party( Non-cisco) devices using Cisco Prime 2.2 ?
Skr

Hi,
Below is supported-device list, check if your device is listed there.
http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html
- Ashok
Please rate the post or mark as correct answer as it will help others looking for similar information

CONFIGURE BACKUP OPTIMIZATION ON;

CONFIGURE BACKUP OPTIMIZATION ON;
above cmd only working on "sbt" type device or it is working also "disk".
plz. let me know. sir.
thanx in advance.

From the docs:
Requirements for Backup Optimization
Backup optimization is used when the following conditions are true:
The CONFIGURE BACKUP OPTIMIZATION ON command has been run to enable backup optimization.
You run BACKUP DATABASE, BACKUP ARCHIVELOG with ALL or LIKE options, or BACKUP BACKUPSET ALL.
Only one type of channel is allocated, that is, you do not mix channels of type DISK and sbt in the same backup command.
http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmconc1008.htm#i1008304

Cannot Configure PO Link in C1

So I got into work this morning to find my 7.0.3 Post Office was not receiving messages from it's Domain.
I went in to the HTTP view of the domain, and it showed for link that the PO had an address of 127.0.0.1 :(
Went into ConsoleOne link configuration tool and attempted to look at the link configuration there. When I switched from the Domain links to the Post Office link, I received two errors windows:
"General directory access error
The attribute value is null. 63063"
Then the next:
"General directory access error
LOGIN CANCELED"
Any thoughts?

Originally Posted by aaronm04
Could this be an eDirectory issue? Is your tree in sync? Can you edit the PO object?
You should be able to temporarily modify the link from the HTTP console. It will change it but it won't be permanent (e.g., restarting the agent will revert it to what is in eDir).
I cannot remember where in the HTTP console to configure the links... I do it all the time in ConsoleOne. Can you remind me?
Sean

Configure backup device in SAP(DB13)

I have installed the ECC 6.0 with SQLServer 2005 ,now I want to
configure the backup device in it. I am using external hdd for backup.
Please suggest me how to configure backup device in SAP(DB13) and
database level.
where I have to set the parameters for backup device.
Thanks

Hi..
You need to configure initSID.sap inside Kernel.
Choose backup device type to disk
backup_dev_type = disk
and change backup root directory
backup_root_dir = < Your_External_HDD_adress>
e.g. G:/backup/
Hope it should work....
Regards,
Abhimanyu
Edited by: Abhimanyu Pandey on May 21, 2009 9:02 AM

How to configure backup device

Hii,
I have fresh install 4.7 with sql 2000 database . I want to take backup of my database in other drive . how i will configure this drive .
thanks & regards
jagdish

hi,
you want to take backup using DB13 or from SQL server enterprise manager,
if you want to take backup on network drive the drive must be map and accessible through windows.
configure backup devices on MS SQL Server management Studio,
logon to SQL server management Studio,
under object explorer navigate through server object -> backup devices
create new backup device -- destination file type. give path for your network drive backup folder.
regards,
kaushal

What is the cisco ironport C680 and M680 configuration backup file size?

what is the cisco ironport C680 and M680 configuration backup file size?

Size of the XML itself? That is going to vary based on what you have configured, total lines of code, and # of appliances you may/may not have in cluster.
M680, based on SMA as stand-alone, should be similar --- you are probably looking @ < 1 MB...
Looking @ my test environment, in which I have a nightly cron job set to grab a backup of...
-rw-rw---- 1 robert robert 161115 Sep 26 02:00 C000V-564D1A718795ACFEXXXX-YYYYBAD60A5A-20140926T020002.xml
So, 161115 bytes = .15 MB
-Robert

Configure backup link

Similar Messages

Maybe you are looking for