Configure Business intelligence site and performance point services
Hi
i created a new Business intelligence site in my web application and after that how i configure performance point service.
and below Configuration is needed?
1- Configure the secure store service
2- Create service application
3- Start PerformancePoint Service
4- Configure Excel Services and SQL Server Reporting Services integration
adil
Hi,
According to your post, my understanding is that you wanted to configure PerformancePoint Services in SharePoint 2010.
In order to use PerformancePoint Services in Microsoft SharePoint Server 2010, you need to configure a PerformancePoint Services service application. Once you have created the service application, you need to provide data access to the users. This can be done
by using the unattended service account, or by configuring Kerberos delegation.
You can follow the steps as below to configure PerformancePoint Services.
1. Create and configure a PerformancePoint Services service application:
• Configure the PerformancePoint Services application pool account
• Start the PerformancePoint service
• Create a PerformancePoint Services service application
• Configure service application associations
2. Configure the unattended service account for PerformancePoint Services:
• Configure the secure store service
• Configure the unattended service account
• Grant that account access to your data sources
For more information, you can refer to:
http://technet.microsoft.com/library/ee748643(office.14).aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Similar Messages
-
Business Intelligence and performance point problem
Hi Everyone,
Please does anyone know why creating a dashboard from a Sharepoint list is such a hassle. I have configured performance point services, a secure store and a business intelligent website that has a data connection library and Performance Point content
list . Unfortunately anytime I try to use dashboard designer to create a new data source and specify the site settings(using unattended account method) I can't save it. It gives me an error claiming that I either don't have permissions or the data source
doesn't exist.
A search around the web for answers doesn't seems to solve my problem as it suggests that the problem is associate with many things which I'm not clear about. Please could someone who is good at this at least tell me the critical things to check and the
clearest way to set this up.
Thanks,
DominicHi Dominic,
According to your error " I either don't have permissions or the data source doesn't exist", it should be related to the unattended account permission.
Once the unattended service account has been configured, you must grant that account access to your data sources:
For SQL Server data, the account must have a SQL logon with db_datareader permissions on each database that you want to access.
For SQL Server Analysis Services data, the account must have read access to the cube or an appropriate portion of the cube, depending on your needs.
For Excel Services data, the account must have access to the Excel workbook in a SharePoint document library.
For data in a SharePoint list, the account must have read access to the list.
Reference:
https://technet.microsoft.com/en-us/library/ee836145.aspx
Also you can have a look at the blog:
http://www.chrismcnulty.net/blog/Lists/Posts/Post.aspx?ID=74
https://yossidahan.wordpress.com/2012/08/14/cant-get-ssas-databases-to-appear-in-performance-point-dashboard-designer-check-you-adomd-net-version/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
While back up and restoring the business intelligence site collection in sharepoint 2010
Hi,
i am trying to take backup of business intelligence site collection from one sharepoint server and restoring it to the 2nd sharepoint server,backup and restore successfully completed.i have configured all the performance point services on new server also.
but still i am getting below error:-
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem: Microsoft.PerformancePoint.Scorecards.BpmException: The filter no longer exists or you do not have permission
to view it. PerformancePoint Services error code 20700.
Can anybody suggest me how to resolve these error.
And the dashboard is looking like below:-Hey Surbi
I'm facing the same issue, actually restored a backup of the BI site collection into a different web app (on the same server) but get the same errors as you!
Looking into it the connection to the report or filter (whatever artefact it is) needs to be refreshed so technically the report doesn't exist as far as the performance web part is concerned!
However when I re-attached the web part to the filter or report I got a different error... 'This data source no longer exists'
So basically I found I had to re-create the reports and filters etc in Dashboard Designer... to re-create the dashboards. I did one page and don't want to spend months re-doing them!
Anyone come up with a way of preserving the web parts references to performance point items and the items connections to their data source in a restore of a site collection? -
Performance Point Services - Unable to connect to site from Dashboard designer
Recently we moved the Reports site collection from one environment to other. So the Performance point content is also copied.Now I wanted to change the report paths that were deployed using Performance point services. When I try to open the report file from
perforamnce pointcontent list it shows unexpected error. If I am trying to connect to the using Dashboard designer it says URL is not available does not reference Sharepoint Site or you do not have permissions to connect.
Pleasee see the attached file for more details.
How do the reports be fixed when they are to be deployed using Performance point services(Dashboard designer). Unfortunately we do not have the dashboard designer ddwx file with us. Its been developed by vendor and they have not given us.
How should the Dashboard reports(SSRS Report ) be moved from one environment to other.What is the best way to move the performance point dashboards from one environment to other.
Environment- Sharepoint 2010At both site-collection level and web application level you need to enable SharePoint designer. Did you do that ?
http://blogs.msdn.com/b/mcsnoiwb/archive/2010/07/01/locking-down-sharepoint-designer-2010.aspx
Opening site in SP Designer also needs WebDAV to be enabled on the web front end servers. If the problem still persists, simultaneously open up fiddler and see what's the error message you are getting. That may give you some clue to proceed
Please mark the replies as answers if they help or unmark if not. -
Performance point services error
We are trying to configure performance point services in our environment.
We have successfully setup the secure store service and after that performance point service but still if we browse the site and start the dashboard designer, we are getting below error:
"an error has occurred attempting to contact the specified sharepoint site dashboard designer"
We have configured our web application with classic mode authentication. Do we need claims based authentication for this?
Thanks in advance.Hope you followed below steps properly
http://www.dotnetcurry.com/showarticle.aspx?ID=650
Also check if below helps
http://blogs.msdn.com/b/mcsukbi/archive/2011/11/26/bi-service-applications-in-sharepoint-2010-authentication-classic-vs-claims-and-identity-delegation-kerberos-part-5.aspx -
Performance Point Services vs Reporting Services
I am using Reporting Service in SharePoint 2013 Enterprise Version.Now i have to create a POC for Performance Point Service.I want to know in which scenerios i can use Performance Point Service instead of reporting service,Please suggest me the article which
differentiate between both the serviesIn short, SSRS is great for drill-down (matrix) reports and free-form reports, PPS is great for building dashboards, KPIs and predictive reports. Also see:
http://www.mssqltips.com/sqlservertip/2737/sql-server-reporting-services-vs-performancepoint-services/
http://businessintelligist.com/2012/04/02/comparing-performancepoint-powerview-excel-services-and-reporting-services/
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com -
HI
In Sharepoint 2013 BI solutions using Performance point services is can be compatible with Analysis server 2008 R2?
here in sp 2013 i upgraded sp 2010 BI site and when i open dashboard pages they not display the pointers.
and when i open dashboard designer i was unable to connect Analysis server 2008 R2 where data source exists
adilHi
1) here i migrated a Publishing web applications and bi sites to 2013 sucessfully, this site is enable anonymous access
2) Installed SQLSERVER2008_ASADOMD10
3) added performance point service application pool account as a db_owner and data read access permission to content database and added permission to unattended service account to SSAS server .
3) and after i was able to connect to SSAS data soruces.
here when i open dashboards with administrator user , this user able to view dashboards
but when external user able to view dashboards it asking authentication and throws error.
Log Name: Application
Source: Microsoft-SharePoint Products-PerformancePoint Service
Date: 3/15/2015 11:59:02 AM
Event ID: 1101
Task Category: PerformancePoint Services
Level: Error
Keywords:
User: NT AUTHORITY\IUSR
Computer: TSharepint2013.test.com
Description:
An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this
problem:
Microsoft.PerformancePoint.Scorecards.BpmException:
The scorecard no longer exists or you do not have permission to view it.
PerformancePoint Services error code 20700.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
<EventID>1101</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-03-15T08:59:02.151586300Z" />
<EventRecordID>149327</EventRecordID>
<Correlation ActivityID="{54EDF29C-9842-C025-E404-2869814A5DF0}" />
<Execution ProcessID="8120" ThreadID="7816" />
<Channel>Application</Channel>
<Computer>TSharepint2013.test.com</Computer>
<Security UserID="S-1-5-17" />
</System>
<EventData>
<Data Name="string1">An exception occurred while rendering a Web control. The following diagnostic information might help to determine the cause of this problem:
Microsoft.PerformancePoint.Scorecards.BpmException:
The scorecard no longer exists or you do not have permission to view it.
PerformancePoint Services error code 20700.</Data>
</EventData>
</Event>
adil -
Hi,
How to Drill Down the Analytic Chart on Double Click on the chart bar in SharePoint Performance Point Service.
Double-clicking on a Analytic chart element to drill down to the next level Performance Point Service.
I have connected with Cube. I am working in SharePoint 2010.
Thanks & Regards
Poomani SankaranIt has to do with the order you enter the fields in the Business Model from Physical model! It must be the opposite way than the one you want them to be show. In your case, you must first delete both fields from your business model, then drag tham in with first the "name" field and then the "code" field.
It did work for me! -
How do I configure a VPN Site and Subnets in Lync when clients have /32 Addresses?
Hello,
I've found a few people asking this question out in the "interwebs" but no one seems to quite answer their question (Those poor souls).
In most occasions that I've seen, my customers have configured their VPN networks with a /24 (255.255.255.0) ip address. However, when those clients connect to the VPN they are actually getting a /32 (255.255.255.255) address.
This seems to pose an issue for Lync reporting when it comes to configuring a VPN site and VPN subnets.
(NOTE:You might ask why these customers are not going about best practice and using split-tunneling? In this case, they absolutely CANNOT institute split-tunneling so all traffic MUST flow through the VPN tunnel.)
For example sake, here is how I would imagine to setup a VPN site with subnets in Lync Network Configuration:
VPN (Site)
-172.16.33.0 /24 (Subnet)
-172.16.34.0 /24 (Subnet)
-172.16.35.0 /24 (Subnet)
The problem is that when I run a Location Report in Lync to look at call data to/from the VPN site, it's not there. Reason being, the VPN client was given a /32 address which doesn't match up to the /24 I configured in Lync.
So, in my mind my options are:
Create a /32 subnet for each single address corresponding to a VPN client and attach them to the VPN site (What a mess).
Change the subnet mask for the 3 subnets I've defined to /32 instead of /24 and see what happens even though putting an IP address of 172.16.33.0 /32 doesn't make much sense.
Remove the subnets and site from Lync because CAC and Bandwidth control are actually useless over VPN.
Any thoughts on this?
John K. Boslooper | Lync Technical Specialist | Project Leadership Associates
Phone: 312.448.2269 | www.projectleadership.netJin,
/32 addresses are a valid subnet mask, however that means that a host with a IP Address of 192.168.23.4 and a subnet mask of 255.255.255.255 (/32) is the ONLY host on that subnet.
The VPN configuration is correct. The /32 mask is common with a Juniper VPN (which is what they are using) and the DHCP server that is handing out the addresses is the Juniper VPN appliance.
They have already started working out a plan to use a different internal DHCP relay which should hand out the addresses correctly.
There has to be someone else out there with this issue or that can point out that i'm overlooking one key principal with VPN subnets.
Anyone?
John K. Boslooper | Lync Technical Specialist | Project Leadership Associates Phone: 312.448.2269 | www.projectleadership.net -
How to enable "SelectAll " in MultiSelect MDX filter in Performance Point Services 2010
Hi,
I have multi select MDX filter in Performance Point Services 2010. I need all the values of the filter to be selected by default. i.e when the page is loaded for the first time, all the values in the multi select filter should be selected.
Is there any property enabled for this? Any other solution can be achieved?
Kindly help.
Regards,
ManiAt least I haven't managed to alter the display value. It uses the member name directly.
The only thing that comes to mind is creating a user hierarchy, so that countries and states can be shown as a tree in the filter. -
Performance Point Services Data Source Sql Server Table.
Hi,
I have a requirement where I need to create a matrix report which shows resource capacity and deomand fromProject Server 2010 databases which involves joining of multiple tables and views from the database.
But in Performance Point Service 2010 I am not able to write query to join multiple tables it'sjust showing one option in Data Connection to create connection to a database and specific one table not like SSRS where we can connect to database and can query
multiple tables and views to render the report as required.
So can any body suggest in case I am missing something in PPS 2010 or we cant joing or write sql query in PPS 2010
ThanksI would join the tables in a view as Regis suggested or simply pull the information into a PowerPivot model and use that in SharePoint to connect to in PPS. If you go that route then you will be able to use a multidimensional source and can create
Analytical Reports.
http://denglishbi.wordpress.com/2011/01/03/using-powerpivot-with-performancepoint-services-pps-2010/
http://denglishbi.wordpress.com/2012/02/09/using-performancepoint-services-pps-with-powerpivot-sql-server-2012-rc0/ -
Hi
We have copied our Project Server 2010 production databases to development server. We have few reports created by using Performance Point Services, but here when we try to open the reports the data source is pointing towards production data source
instead of dev.
We are getting some issue while executing the reports
Request you to let me know what exactly the cause and steps to rectify the issue.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.As you have copied data from Prod to Dev reports are pointing to production data sources and reports are unable to display data. Whenever we copy the data from one environment to other then this kind if issue occurs.
We need to modify the data source of all the reports manually so that report point to dev data source.
You have to open data source for your reports and change it from prod to dev then reports will display correct data.
http://blogs.msdn.com/b/performancepoint/archive/2011/09/19/performancepoint-data-connection-libraries-and-content-lists-in-sharepoint.aspx
http://www.networkworld.com/community/node/57687
kirtesh -
Performance point service errors in share point wfe servers event viewer
HI
i am facing a problem in performance point service , i seen two errors in event viewer of a sharepoint wfe server
An exception occurred while the width of the Web. Diagnostic information that may help determine the cause of the following in this issue:
Microsoft.PerformancePoint.Scorecards.BpmException: There is a problem in the preparation of a Web Part for display.
Error code "Services PerformancePoint" is 20700.
2 error)
Log Name: Application
Source: Microsoft-SharePoint Products-PerformancePoint Service
Date: 02/09/35 01:11:41 م
Event ID: 39
Task Category: PerformancePoint Services
Level: Error
Keywords:
User: NT AUTHORITY\IUSR
Computer: XYZWFE02.XYZportal.com
Description:
A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application is configured to
a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
<EventID>39</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-29T10:11:41.385108100Z" />
<EventRecordID>1422377</EventRecordID>
<Correlation ActivityID="{D707EAF7-6A6A-45FA-AF83-77DC3231B658}" />
<Execution ProcessID="18236" ThreadID="19172" />
<Channel>Application</Channel>
<Computer>XYZWFE02.XYZportal.com</Computer>
<Security UserID="S-1-5-17" />
</System>
<EventData>
</EventData>
</Event>
adilHi
also below error is coming in eventy viewer of wfe servers
Log Name: Application
Source: Microsoft-SharePoint Products-PerformancePoint Service
Date: 03/09/35 02:25:26
م
Event ID: 39
Task Category: PerformancePoint Services
Level: Error
Keywords:
User: NT AUTHORITY\IUSR
Computer: XYZWFE02.XYZportal.com
Description:
A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-PerformancePoint Service" Guid="{A7CD5295-CBBA-4DCA-8B67-D5BE061B6FAE}" />
<EventID>39</EventID>
<Version>14</Version>
<Level>2</Level>
<Task>1</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-30T11:25:26.997772700Z" />
<EventRecordID>1425270</EventRecordID>
<Correlation ActivityID="{EB0C99EA-5B6A-4001-9D9B-C91FF779CD4B}" />
<Execution ProcessID="6736" ThreadID="15788" />
<Channel>Application</Channel>
<Computer>XYZWFE02.XYZportal.com</Computer>
<Security UserID="S-1-5-17" />
</System>
<EventData>
</EventData>
</Event>
adil -
Performance point service for SharePoint List
Hi All,
I've a requirement to create Performance Point service to display in the SharePoint List. List contact single line of text columns.
So i would like to know whether there is any possibilities to utilities this
PPS for this SharePoint List. Please suggest.
Thanks in advance!
Arun PrakashHi Arun,
Could you please elaborate your demand?
Also you can have a look at the blog for using PerformancePoint Services in SharePoint:
http://www.codeproject.com/Articles/783405/PerformancePoint-Services-in-SharePoint
http://blogs.msdn.com/b/performancepoint/archive/2011/09/19/performancepoint-data-connection-libraries-and-content-lists-in-sharepoint.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Performance Point Service Filter Reset on button click?
Hi.
Is it possible to reset the PPS filter on button click (Common "Reset" button).
Is it possible to do by using Javascript?
I need some work around to achieve it.
Thanks & Regards
Poomani SankaranHi,
According to your post, my understanding is that you want to reset Performance Point Service Filter on button click.
You can follow the article
SharePoint Dashboard with Common Filters using PerformancePoint Services 2010 to create a dashboard with common filters using SharePoint PerformacePoint services 2010 and SQL Server Analysis Services (SSAS) Data Source.
Then you will see the filters on top of your dashboard. You can change the filters and see that both the reports are rendering the data as per your filter choice.
If you'd like to default the filter to a particular value on page load, you might want to try a JavaScript based approach:
Define the function 'NotifyBrowserOfAsyncUpdate(elem)', which PPS will call after any PPS render request completes (i.e., when your filter renders).
Within the function, check that elem.control exists and then check that elem.control.webPartTitle equals your filter's title.
If it does, search elem (the filter web part's main container DIV) for the actual filter control and change the value. If you're using a dropdown, this is pretty simple - just remember to call the 'onchange' method on the select as well so that connected
PPS objects refresh.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/61939/default-pps-filter-for-pps-dashboard-in-sharepoint-2010-not-showing
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Maybe you are looking for
-
I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help
-
I have 150 gb of free space on HD, yet says no space available. Help?
I was downloading music recently and triedto import it into ITunes when a message popped up stating something like, "will copy as much as possible. No more space on ------ HD available". At the same time, Dropbox was not letting me upload music to it
-
I am trying to return a ref cursor from a function in a package. I am trying to execute this through SQL Plus and cannot seem to get the code correct this is what I have. Please help. How do I display the output? I tried a CURSOR FOR loop, but got sy
-
Linux 10g versus Windows XP 10g Issue - ORA-07445: exception encountered
I did a full database export using exp from a 10g Linux database: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Prod PL/SQL Release 10.2.0.2.0 - Production "CORE 10.2.0.2.0 Production" TNS for Linux: Version 10.2.0.2.0 - Product
-
How can I apply same duration to all the pictures in a project at the same time, please ??
I' m trying to apply the same duration to all the pictures of a project in iMovie, at the same time but I can't. Could anyone tell me how to do it, please ?