Configure CA Wily Introscope - No connection user yet defined. Select one

Hi,
Can you please assist with this one.
The basic configuration step is showing the following issue.
"No connection user yet defined. Select one"
Screen shot below. The next screen 3.1 also shows a similar error message.
Regards
Tariq

Hi Tariq,
It looks like the connection user for Wily EM in the solman_setup is missing.
Please follow the steps below :
Select a CA Wily Introscope Enterprise Manager.
Choose the User Management button. A dialog box appears.
Assign the user which is to be used to connect the CA Wily Introscope Enterprise Manager to SAP Solution Manager, For example : Admin
Enter the password of the administration user.
Choose OK.
Make sure that the above settings are saved.
Hope this helps.
Thanks & Regards,
Nisha

Similar Messages

  • LDAP Connection - users in more than one group

    Hallo.
    I set up an appl. with ldap connection (Novell eDirectory 8 / Novell 6.5).
    Working fine for users in an specified container.
    Using (Based on a pre-configured scheme from the gallery
    ; Show Login Page and Use LDAP Directory Credentials)
    LDAP DN STRING=
    cn=%LDAP_USER%,o=los
    only users in container los can connect,
    Using
    LDAPDN=
    cn=%LDAP_USER%,ou=amt10,o=los
    now menbers of amt10 can connect but no one else
    Is there an hint to get it work recursive ? (like mod_auth_ldap in apache does ?) So all users in any conainer under o=los will able to connect
    I have nearly 1000 Users in ~50 Containers, what sould I do best? What is misconfigured?
    Ralf

    I'm using a nifty little application call iCalPublish. Check it out at http://www.buddy.com/ical/
    sb

  • CA Wily Introscope was not found in LMDB

    Hello
    When I setup solution manager 7.1 SP11 ,In Basic Configuration step Configure Automatically, the automatic activity Create Self-Monitoring Scenario is not able to find the Wily Introscope technical system. As note 1820491 ,one error has occoured. Please check the following for detail .
    ERROR
    As note 1820491
    I have perform the following steps manually successfully
    In Landscape Browser UI, open the LMDB Administration - Expert UI
    In the Expert UI, delete following Class Name:CIM Class Name: SAP_IPSERVICEPORT and CIM Refernce String: WLY
    Repeat the same for other CIM Classes like SAP_HTTPSERVICEPORT in case they are displayed in the warning of step Configure Wily Introscope
    Return to Basic Configuration step Configure CA Wily Introscope and use Edit and Save buttons
    But when I perform the following step, one error has occurred:
    When save , one error has occurred:
    TCODE : SLG1
    Technical System not found
    The technical system 'WLY~IS_EM' was not found in the landscape, but the authorization check is posi
    tive. [CX_DIAGST_RETRIEVE_EXCEPTION]
    How to create the WLY IS_EM technical system ?
    Can who help me to solve this ?
    Thanks
    LEO LEE

    Hi
    LMDB->Technical Systems->Create, Display, and Edit Technical Systems->
    Technical System Selection->Type->Wily Introscope Enterprise Manager (Standalone)-> Extended System ID:->WLY->EDIT->Arrtributes

  • Is Wily Introscope User manual Available?

    Hello,
    We have installed Wily Introscope 7.1 , Enterprise Manager on a seperate host.
    We are able to see graphical represenatation of many parameters.
    Now we want to customise the parameter & configure the alerts for  perticular values.
    Does any know how to customise/alter/configure these parameters?
    IS ther any User Manual for this available.
    Your help will be highly appreciated!
    Thanks and regards,
    Pradnya

    Hi pradnya,
    this is what I've found:
    <b>Introscope WebView User Guide for SAP, Release 7.1</b>-
    https://websmp208.sap-ag.de/~sapdownload/011000358700000080622007E/
    <b>Introscope Workstation User Guide, Release 7.1</b> -
    https://websmp208.sap-ag.de/~sapdownload/011000358700000080632007E/
    <b>Introscope Glossary, Release 7.1</b> -
    https://websmp208.sap-ag.de/~sapdownload/011000358700000080642007E/
    Dimitry Haritonov

  • Wily Introscope is not running in Solution Manager 7.1

    Hello Experts,
    wily Introscope is not running in solution manager system,
    below error getting in log, solution manager is running on windows server and how to start wily in windows.
    8/23/14 11:58:50.088 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 11:58:50.089 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 11:58:50.090 AM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 11:58:50.091 AM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 11:58:50.113 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 11:58:52.343 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 11:58:52.412 AM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 11:58:52.628 AM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 11:58:52.645 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 11:58:52.655 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 12:02:31.584 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 12:02:31.585 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 12:02:31.586 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 12:02:31.602 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 12:02:31.958 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 12:02:31.959 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 12:02:32.030 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 12:02:32.287 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 12:02:32.306 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 12:02:32.321 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    8/23/14 12:37:05.225 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager Release 9.1.0.0 (Build 581006)
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Java VM version "Java HotSpot(TM) 64-Bit Server VM 1.6.0_23" from Sun Microsystems Inc.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Using Introscope installation at: D:\usr\sap\CCMS\apmintroscope\.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] CA Introscope(R) Version 9.1
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Copyright (c) 2011 CA. All Rights Reserved.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope(R) is a registered trademark of CA.
    8/23/14 12:37:05.226 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting Introscope Enterprise Manager...
    8/23/14 12:37:05.227 PM IST [INFO] [WrapperSimpleAppMain] [Manager]
    ****** CA Wily Introscope License ******
      type = em-sap
      rev = 30
      cid = sap-ags
      organization = SAP Active Global Support
      reg-id = sap-end-user
      email = none
      sum = 27618b562bc2239e3cf71d9542c76df4
    8/23/14 12:37:05.228 PM IST [INFO] [WrapperSimpleAppMain] [Manager] The Introscope Enterprise Manager is set to run in StandAlone mode.
    8/23/14 12:37:05.249 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Starting server...
    8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections are enabled
    8/23/14 12:37:05.644 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Introscope WebView connections will be assigned the name "WilyWebView"
    8/23/14 12:37:05.728 PM IST [INFO] [WrapperSimpleAppMain] [Manager.Authentication] Configured the Manager of Managers user using private key internal/server/EM.private
    8/23/14 12:37:05.994 PM IST [ERROR] [WrapperSimpleAppMain] [Manager] The EM failed to start. Local Users and Groups realm is misconfigured. Error using new settings for Realm: Non existent user "analyst" referenced in "CEM Analyst" group.
    8/23/14 12:37:06.014 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Shutting down the Isengard server
    8/23/14 12:37:06.028 PM IST [INFO] [WrapperSimpleAppMain] [Manager] Orderly shutdown complete.
    Please assist me on this
    Best Regards
    Hanuman

    Hello Srivastav,
    i am getting below problem in wily introscope log
    9/01/14 11:22:02.675 AM IST [ERROR] [WrapperSimpleAppMain] [Manager.Acceptor] Failed to bind to server socket
    java.net.BindException: Address already in use: bind
      at sun.nio.ch.Net.bind(Native Method)
      at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:126)
      at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
      at com.wily.isengard.postofficehub.link.server.Acceptor.<init>(Acceptor.java:72)
      at com.wily.isengard.postofficehub.link.server.ConnectionListenerFactory.create(ConnectionListenerFactory.java:31)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.startIncomingConnectionListener(PostOfficeHubServer.java:261)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.startAllIncomingConnectionListeners(PostOfficeHubServer.java:235)
      at com.wily.isengard.postoffice.server.PostOfficeHubServer.acceptIncomingHubConnections(PostOfficeHubServer.java:103)
      at com.wily.isengard.api.server.IsengardControllerServer.acceptIncomingConnections(IsengardControllerServer.java:207)
      at com.wily.isengard.api.samplemain.SampleMain.acceptIncomingConnections(SampleMain.java:117)
      at com.wily.introscope.server.enterprise.EnterpriseServer.initialize(EnterpriseServer.java:708)
      at com.wily.introscope.server.enterprise.EnterpriseServer.doStart(EnterpriseServer.java:358)
      at com.wily.util.ALifeCycle.start(ALifeCycle.java:86)
      at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:301)
      at com.wily.introscope.server.enterprise.EnterpriseServer.<init>(EnterpriseServer.java:280)
      at com.wily.introscope.server.enterprise.EnterpriseServer.start(EnterpriseServer.java:1444)
      at com.wily.introscope.em.internal.Activator.startEM(Activator.java:116)
      at com.wily.introscope.em.internal.Application.start(Application.java:27)
      at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
      at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
      at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
      at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
      at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
      at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
      at org.eclipse.core.launcher.Main.main(Main.java:30)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)
      at java.lang.Thread.run(Thread.java:662)
    9/01/14 11:22:02.679 AM IST [INFO] [WrapperSimpleAppMain] [Manager.PostOfficeHub] Server listening for incoming default socket connections on port 6001
    9/01/14 11:22:02.682 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Connection Initiator listening...
    9/01/14 11:22:02.684 AM IST [INFO] [WrapperSimpleAppMain] [Manager.MMHotDeployEntity] Will monitor D:\usr\sap\CCMS\apmintroscope\deploy for new files every 60 seconds
    9/01/14 11:22:02.685 AM IST [INFO] [WrapperSimpleAppMain] [Manager] Introscope Enterprise Manager started with management module warnings.
    9/01/14 11:22:42.883 AM IST [INFO] [PO:main Mailman 1] [Manager.LoadBalancer] Loaded loadbalancing.xml
    9/01/14 11:23:31.817 AM IST [INFO] [btpool0-1] [Manager] User "Admin" logged in successfully from host "localhost"
    9/01/14 11:23:31.825 AM IST [INFO] [btpool0-1] [Manager] request.getContextPath() /webview
    9/01/14 11:23:31.826 AM IST [INFO] [btpool0-1] [Manager] Login event Admin 1667ryb11leum 10.1.0.133 true
    9/01/14 11:51:30.061 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409164200000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.063 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409077800000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.064 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409423400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.066 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409337000000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.067 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1409250600000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.088 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1406831400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.089 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408991400000.data seems to be OK - not sure what to do with append inputs
    9/01/14 11:51:30.090 AM IST [INFO] [Carver data management] [Manager] Existing query file data\archive\1408905000000.data seems to be OK - not sure what to do with append inputs
    Please help me to sort this issue,
    Best Regards,
    Hanuman Chinthalwar

  • Wily Instroscope Agent connection problem to Enterprise Manager

    Hello!
    Perhapse some of you guys deal with this problem before and can give me an hint?
    I install the Wily Introscope Enterprise Manager and one Agent according to the "Introscope Version 7.0 Installation Guide for SAP" but if i try to start the agent i get the Warning: [IntroscopeAgent.ConnectionThread] Failed to connect to the Introscope Enterprise Manager at <server>:6001, com.wily.isengard.postofficehub.link.net.DefaultSocketFactory (1)
    I checked if the server is reachable with ping and also if the port is open via telnet from the system where i have installed the Agent.
    Any ideas?
    King regards, Stefan

    Hi Jens, thank you for your answer, yes i tried to use the ip adress instead, with the same result.
    Very strange from my  point of view is the thing that i can't get a telnet connection if i try to connect to from the enterprise manager server to the agent server. This look like a network issue to me, dosen't it? in the other direction there is no problem and on the enterprise manager server i see that listening on 6001 is on. If I check this on the agent machine, i can't see anybody listening on this port. But from my point of view it should?
    Webview isn't in place right yet, i thougt i should finish the "normal" configuration first?
    Regards, Stefan

  • I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page- can't move to the main page – any idea on what and how, please?

    Hello, I installed my new Apple TV and successfully completed the configuration (Wireless network, Apple ID, and others) yet I am always in the Computers and Setting page… can’t move to the main page – any idea on what and how, please?

    Welcome to the Apple Community.
    Unfortunately, a number of users appear to have encountered this problem. Some of these users have reported that the problem just disappears the following day or shortly after. Other users have found various other solutions to this problem.
    Firstly, are you receiving any date and time errors when you turn on your Apple TV?
    Check that you are properly connected to the Internet, by ensuring that you have a proper IP address and not one starting with 169. Also check that your location for the iTunes Store is set correctly, if so you might try changing it and then changing it back.
    If the problem persists try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router, or if this doesn't work you might like to try a restore.

  • Wily Introscope 7.1 error

    Dear all,
    Facing a bizar issue.
    I'm configuring Solution Manager Diagnostics (on Win2003 Server / IA64-bit, java 1.4.2_12) and installing Wily Introscope Enterprise Manager 7.1.
    Did the installation as described in the setup guide; the ccms/wilyintroscope in /usr/sap is created, the windows service is created an running. But when checking the log (IntroscopeEnterpriseManager.log) to verify EM is running I don't find the line 'Server listening for incoming .... on port 6001'.
    I also installed WebView on SAP NetWeaver and I'm able to display the login-screen, but i gives me the message 'This WebView instance is connected to the Enterprise Manager on unconnected.', while unconnected should be something like localhost.
    Someone any idea?
    Any help is highly appreciated!
    Tnx
    Roel

    Hello,
    I have the same problem.
    Moreover, in the logs I have "The EM docs webapp could not be started"
    Thanks for your reply !
    Chakire

  • Wily introscope 9.1

    Hi,
    Can anyone help me to install wily introscope 9.1 in solution manager 7.1.
    Thanks & Regards
    Preetam

    Hello,
    I just recently installed sandbox 7.1 system. I installed 8.2.3.5 and Wily EM Service was started, but it showed as offline in the basic configuration, and I could not get it online even with collaboration. Finally we tried installing 9.1 and once completed, the EM showed online, so I was able to continue the basic configuration.
    Now I have just recently completed my basic configuration and am now configuring the various scenarios. So the upshot is I have not had time to look any further at Wily. Therefore I can't summarize the new features/differences, as I have not really had a chance yet to look at it in any depth. And the installation effort was a lot more than it should have been as I spun my wheels for 3 weeks trying to get 8.2.3.5 working. And by this time I already had a colleague from Diagnostics involved, so with that expertise the actual effort to install 9.1 was pretty quick, once it was decided that was the route to go.
    Also, I am doing a brand new installation, and not an upgrade of an existing one, which can make a difference.
    Wish I had more to offer here.
    Regards,
    Paul

  • I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

    I get an "unable to connect" message yet I can connect and use Internet Explorer with no problem. I tried updating to Firefox4 and still get the same message. What do I do?

    JungleTaxi Cabbie wrote:
    Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
    Enter your Incoming Mail Server, User Name, and Password using the following settings:
    Incoming Mail Server: mail.me.com
    User Name: Your iCloud email address (excluding @me.com)
    Password: Your password
    Last Modified: Jun 27, 2013
    Maybe you should test these things before calling people out, because these settings do function perfectly well.
    iCloud is not supported on Snow Leopard or lower, why bother to mention it?
    The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
    The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
    JungleTaxi Cabbie wrote:
    Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
    I never said that there was, perhaps you imagined it.

  • Wily Introscope as monitoring tool?

    Hello everybody,
    we are looking for a tool capable of monitoring Systems with usage type "java", e.g. Enterprise Portal oder Process Integration.
    Has anybody experience with Wily Introscope, e.g. concerning usability?
    Whatever experience
    Thanks a lot
    Thorben

    Yes Wily is a very usable monitoring and diagnostic toolset for the J2EE platform. This is especially true for the NetWeaver Portal. SAP has gone to great lengths to instrument the Portal Stack and provides thousands of metrics on a typical Portal and there are tools to Monitor, Analyze, Trace, Track Errors all as part of the Read-only version delivered by SAP.
    The pre-configured dashboards are quite nice. The newer release allows use of the Introscope Workstation Version 7.1 product which is more feature rich than the WebView user tool, and this is a plus.
    If you want to integrate to an automated Alerting System you'll have to buy the Solution Enablement Pack. You can read more about this at service.sap.com/diagnostics.
    Frank

  • Wily Introscope Agent does not start

    Hi,
    i am installing Solution Manager Diagnostics on a Solution Manger 7.0 System. At the moment i am on the point to install the Wily Introscop Agent and i have following problem:
    At first i tried the automatic setup and deployed the agent with JSPM and it seemed to work. I see "ISAGENT" on the System Information -> All Compontents over http://0/smd/admin and there is no log directory in the wily directory?
    Does anybody has an idea whats wrong?
    Best Regards,
    Stefan
    Edited by: Stefan on Feb 17, 2009 8:57 AM
    Edited by: Stefan on Feb 17, 2009 9:31 AM

    Hello Stephan,
    1. Wily IS Agent (2 agents) is installed ONLY in SOLMAN system.
    2. Then, with SOLMAN_SETUP Guided procedure, in third phase (Managed System Configuration),
        you deploy the Wily IS Agent to your managed system.
    To summarize :
    1. Install the ISAGENTxxx.SCA in SOLMAN only !
    2. Start the SOLMAN_SETUP guided procedure
    3. Phase I - Initial Configuration
        Phase II - Basis Configuration
        Phase III - Managed System Configuration.
    In Phase III, there are 6 steps :
    1.     Connect Managed system
    2.     Check Prerequisites
    3.     Manual Configuration
    4.     Diagnostics Configuration
    5.     Wily Introscope Configuration
    6.     Create Logical Components
    The Wily IS Agent (2 agents : IS Agent wich monitored JAVA instance and Wily Host-level Agent which a sub-process of the SMD Agent) is configured and STARTED here.
    So, you cannot start / stop by any OS command the Wily IS Agent.
    You start it from SMD.
    Hope it help you.
    Best regards
    Pascal Cuennet

  • Problem Remote Deploy Wily Introscope Agent

    Hi,
    I installed Wily Introscope EM and the Diagnostic Agent on Solution Manager (EhP1).
    Now, if I understand it, I can do a remote deploy of Introscope Agent, for example on Enterprise Portal.
    How can I do?
    Best Regards.
    Diego.

    Hi Diego,
    Do you also install an SMD agent on the portal system which one you want to managed via RCA? Also you need to run the Setup Wizard for Managed Systems for your portal.
    Please check SAP Note 1365123 - Installation of Diagnostics Agents. In this note you will find an attachment Agent_Installation_Strategy.ppt - describe the installation strategy of SMD agents and all agent rules which you need to follow.
    So one part is to get RCA running:
    1. Install a SMD agent per managed host.
    2. Define the technical system in SMSY Normal you have an SLD in your landscape and connect the Solution Manager to it or use the SLD from Solution Manager. After you define the technical system in SMSY or via SOLMAN_SETUP ->Managed System Configuration you go to Diagnostics Setup.
    3. You access this via Diagnostics work center or direct link http://solman_fqdn:<port>/smd
    4. Next go to Managed System -> Setup Wizard -> Select your to managed system <SID> - > check that system is Diagnostics Relevant (if not click on the managed products and set the relevant product for diagnostic u2013 also verify the Landscape setting light are green u2013 this means the technical system is well defined in SMSY)
    5. Click Setup <SID> Button -> on next screen you need to fill out all Java / Abap connection parameters (for the setup of Java systems you need a userid with j2ee admin rights)
    6. Please set the SMD agent in the right table u2013> Click on details arrow and then select the managed systemu2019s SMD agent and click on the set button. The SMD agent will now reboot wait until the agent is back -> Click on the Refresh button to see the status.
    7. Click Next and on the next screen you get a Summary of all setup steps
    8. Click on Setup. After the setup finished (all steps are green)
    9. Click on quit.
    Before your can deploy the IS agent from the Solution Manager you need to deploy the IS agent files via SDM to the Solution Manager. You can download the deployable IS agent from SAP Service Market Place:
    Support Packages and Patches -> Entry by Application Group -> SAP Technology Components -> SAP SOLUTION MANAGER -> SAP SOLUTION MANAGER 7.0 EHP 1 -> Entry by Components -> Agents for managed systems -> select your version for your IS EM and download the deployable agent via SolMan Diagnostics (File name like ISAGENTSMD801_01-10007435.SCA)
    Now you can start with the setup of the Introscope Agent (on the left menu bar under application selection).
    On the selection screen select first your IS Enterprise Manager then the IS Agent settings the relevant system.
    In the table select the J2EE node for which want you setup the agent (this need to be done for each Server node u2013 the IS agent runs inside of the J2EE node per server)
    Then click on Setup Introscope Agent u2026 Button u2013> select the Autoprobe Directives and click the Apply button. If every steps doen you need to reboot your managed JAVA system.
    Now you are ready to use the RCA tools and also see data in the IS Enterprise Manager.

  • Monitoring Metrics of Wily Introscope / Compared to CCMS?

    Hello,
    As the documentation about Wily says, that Wily Introscope can also be used for monitoring purposes, I am looking for the metrics, one can monitor.
    Unfortunately, I did'nt find an overview yet.
    Can anyone tell me, which metrics Wily Introscope can monitor?
    And how is it in comparison with the CCMS? Does anyone know?
    Thank you,
    Jan

    Hello Jan
    go to service.sap.com/diagnostics -> 'Tools in End-to-End Root Cause Analysis' section
    There you will find the 'Demos' and the 'User Documentation' and FAQs
    and see 'Learning to use End-to-End Root Cause Analysis' too

  • Error while installing Wily Introscope

    Hi All,
    I have installed introscope enterprise manager 8 in solution manager 7.0 (SP15). i have follwed the below steps:
    1. Installation and Setup of SAP Solution Manager Server:
                   upgrading SAP Solution Manager Diagnostics (SMD) package
                   running Diagnostic setup wizard
    everything went successful.
    in the next step of wily introscope installation i have followed the below steps:
    2. installing CA Wily Introscope
               I.   Download Third-Party External Component Package from CA Wily
               II.   elected Platform Independent Introscope Installer
               III.  Extracted the Introscope Installer
              IV. Added the External Component Package
              V. Started the Installer
              VI. Verified the Installation
              VII.Installed the SAP Management Modules
             VIII.Ran the Enterprise Manager from OS level (AIX)
              IX. Checked That Introscope Is Running Properly
              X.  Extracted the Introscope Agent
              XI.  Created an AutoProbe Connector
             XII.  Activated the Agent: Setting up Java VM Parameters -
    here I am facing the issue
    in the installation manual it has been given to add the below java parameters to server node:
    -Xbootclasspath/p:/usr/sap/ccms/wily/connectors/connector.jar:/usr/sap/ccms/wily/Agent.jar
    -Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
    -Dcom.wily.introscope.agent.agentName=<AgentName>
    i have added the above parameters and resterted the server then the java engine is not coming up. conflicting with the first parameter. once I remove that parameter I am able to up the java engine.
    without being added the above parameters " the agent will not start".
    please help me in this.
    thanks in advance
    Mohan K

    Mohan,
    I have the same problem. That is I set up the SMD on the managed system and completed the Managed system configuration through Solman which Installed Wily Introscope. With Wily enabled , the Java server process does not start.
    If I delete the 3 lines that have wily in it, it starts OK.
    How did you resolve this problem. Please let me know in detail.
    Thank you.
    Ravi

Maybe you are looking for

  • Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

    Hi Friends, I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP. Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put

  • Copy-paste ability for nokia x3-02

    Is there any way I can copy and paste with nokia x3-02?

  • Php5/mysql problem

    Hey all, I've just upgraded to php5 and for some reason my forum/blog (eg everything with a mysql connection) seized to work. Other php scripts work just fine. Any clues?

  • Sites for user-made .pst/.cst exchanges?

    I recently posted a little guitar "riff sketch" I'd recorded with GarageBand to a forum, and had one user write me back asking about the settings I'd used since he'd been trying to get similar sounds. I wrote back providing links to zipped copies of

  • Ie 11 command bar

    Is there a way to move the command bar, in IE 11, from the left side to the right side? dragging from the separator doesn't work. thanks