Configure CCMS alert to Analyze Application log

Hi ,
Please provide the prodecure to configure CCMS alert for Applications logs from SLG1 tcode.
If any error log(prefarably Important logs ) is created then a alert should be triggered .
Background : We are using Solution Manager 7.0 as Central monitor system for Satellite systems of verions ECC6.0.
Thanks & Regards
ganesh

this answer is no longer needed

Similar Messages

  • How to configure CCMS alert to monitor Authorization failures?

    Dear All,
    How to configure CCMS alert to monitor Authorization failures?
    Thanks
    Ashok

    Hello,
    in case you have not yet set up your monitoring infrastructure, the following link will provide you with the information needed:
    http://service.sap.com/monitoring
    If everything is set up (Agents are installed and connected to your central monitoring system, ...) you can go to transaction RZ21, select Technical Infrastructure - Configure Central System - Assign Central Autoreactions to set up your alerts.
    For the Update errors use the MTE CLass AbapErrorInUpdate. For the Lock please use the search Option.
    Regards
    Christian
    Edited by: Christian Rose on Apr 25, 2011 7:59 PM

  • Configuring CCMS alerts to send mail

    I need to configure CCMS alerts where the alerts will be send to my mail id.
    I have configured the seting in RZ21 and activated the alerts
    Please tell me the steps to be followed, for sending mails Email in case of any alerts

    You basically need to make sure that
    1. You can receive emails send from SAP Business Workplace to your SAP/Outlook inbox . This can be done by the Tcodes SCOT, SOST.
    2. Configure CCMS_ONALERT_EMAIL_V2 according to your needs (RZ21)
    3. Assign this method to the required MTE via RZ20.
    This is the broader view. Refer this link and the previous posts for more info
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7da1505211d189550000e829fbbd/frameset.htm
    There have been many posts on the same topic previously.
    Edited by: Kunal Belnekar on Mar 18, 2008 2:00 PM
    Edited by: Kunal Belnekar on Mar 18, 2008 2:01 PM

  • Tcode for Analyze application log

    Hello BW Experts,
    What is the transaction code for analyze application log.
    I am accessing it in this way:
    Ods > manage > activation > log > application log
    Thanks,
    BWer

    Hi,
    You can try SLG1.
    Hope this helps...

  • How to Configure CCMS Alert???

    Hi All,
    I would appreciate if any one can help me in configuring CCMS alert for satellite systems in Solution Manager. I want to configure alerts for:
    1. Update Error
    2. Locks (More that 10 hours)
    Any help to start off this would be highly appreciated!
    Waiting for your kind responses.
    Regards,
    Faisal

    Hello,
    in case you have not yet set up your monitoring infrastructure, the following link will provide you with the information needed:
    http://service.sap.com/monitoring
    If everything is set up (Agents are installed and connected to your central monitoring system, ...) you can go to transaction RZ21, select Technical Infrastructure - Configure Central System - Assign Central Autoreactions to set up your alerts.
    For the Update errors use the MTE CLass AbapErrorInUpdate. For the Lock please use the search Option.
    Regards
    Christian
    Edited by: Christian Rose on Apr 25, 2011 7:59 PM

  • Unable to configure CCMS alerts

    Hi All,
    I'm trying to configure alerts in RZ20.
    e.g. whenever there is an error in Mapping (EXCEPTION_DURING_EXECUTE), I can see the alerts in rz20, but I cannot trigger an alert to Alert Inbox.
    I tried to follow the following weblog:
    /people/sap.user72/blog/2005/03/03/alert-management--use-it-in-ccms-to-shorten-response-times-for-business-critical-situaltions
    But it's not working.
    Any help?
    Regards,
    Puloma.

    Hi Puloma,
    Please check these..
    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
    /people/dirk.jenrich/blog/2006/06/28/event-log-monitoring-using-ccms-agents
    /people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
    http://help.sap.com/saphelp_nw2004s/helpdata/en/f0/04983c6e577546e10000000a11405a/frameset.htm
    cheers,
    Prashanth
    P.S Please mark helpful answers

  • Configuring CCMS Alerts in Sol Man 4.0 CUA System

    Hi
    Can anybody forward me some documents on how to add systems for CCMS Alerts on SolMan 4.0 System which is being used a CUA
    Especially, i need a document on the RZ20, RZ21, SCOT and SDCC TCodes during this process
    Immediate help would be greatly appreciated
    Kalyan Jonna
    [email protected]

    Hi,
    Check this note
    763561 - Service Data Control Center (SDCCN) - FAQ Solve all your queries.
    You have more here.
    861753 - LAW: Replacing SDCC with SDCCN
    Hope this will solve your problem.
    Feel free to revert back.
    --Ragu

  • Configuring CCMS alerts for Availablity Monitoring

    Hi All,
    We are in the process of configuring availablity monitoring in central system (solution Manager 7.0 with SP stack 23) to monitor all systems (ABAP,Java,Dual Stack, Trex,DMS,etc) in landscape.
    As a first step, we have registered CCMS agents in monitored (ABAP) system and connected to central system (Solman)
    All the required RFCu2019s have been defined for data transfer between monitored and central system
    In RZ20,i could see the availablity as 100% for the defined moniored system under  SAP CCMS Technical Expert Monitors>All Contexts on Local Application Server>CCMS self monitoring >CCMS agents>CCMSPING.hostname
    Not sure whether above path is the place where in we look for alerts
    Please clarify the below points
    i) how to configure the email alerts (in RZ20) from the central system when monitored system is down
    ii) the path in which I can find the alerts in RZ20 for that monitored system or how to add the monitored system incase if that  doesnt exists
    iii) MTE class under which analysis, auto reaction method to be assigned ?
    iv). data collection method and frequency
    v). Which MTE class to be used to assign the Autoreaction method (CCMS_test_mail alredy defined)
    Appreciate your quick response on this
    Thanks,
    vadi

    Hi All,
    Thanks a lot for your reply.
    Still i m having an issue in handling the  RZ20 alerts managemnent
    In RZ20,
    i) i able to see the added monitoried system id under the node CCMS Monitor templates>Availablity & performance overview>Availablity-->monitored sys id
    ii) When i click on open staus for the above node turns to green color
    ii) when i click on current status the node turns to grey color
    I am not sure whether the data collection is being passed since it doesnt turn red when the system is down
    However the dispatching jobs are active in both CEN and monitored (000 client) systems
    Appreciate your response
    Thanks,
    Vadi

  • Business Importance of CCMS alerts and Early Watch Alerts configuration

    Hi All,
    I have to present to the management how will configuring CCMS alerts and EWA alerts impact the business and how will it help in maintaining our business and existing scenario through the same. Could some body provide me with the PPT presentations/links/ slides which would help me.
    Points guarnateed for good help . Thanks ins advance.
    Regards,
    Somya Maheshwari

    Hi Somya,
    Actually if you are looking for business point of view you need to go for BPM which is more important from business perspective
    and further now we have BPO dashboards too.
    so customer will be more happy if you can configure bpm because then you can get the reports etc in workcenter and they can view the same in workcenter rather than just technical alerts in CCMS.
    Because based upon my exp they want to go for proactive monitoring not just technical monitoring and later we come to know what happened without knowing the business impact actually.
    Moreover in solman 7.1 its a wizard based approach to configure entire technical monitoring just go thru it.
    this note might help you otherwise.
    SAP note 897226 ('Monitoring TREX with CCMS")
    and below links with ccms config
    Monitoring your SAP NetWeaver Components
    setup ccms
    Setting Up your Central Monitoring
    hope it helps further
    regards
    prakhar
    Edited by: Prakhar Saxena on Feb 7, 2012 1:51 PM

  • CCMS Alert Configuration Problem-ST03G

    Hi All,
    I'm trying to configure CCMS Alerts for the Adapter Engine, and I'm following the Supportability Guide for the same.
    However, after performing the registration in both J2EE standalone and ABAP (as given in the guide), I am unable to see the entry for SAPJ2EE Component in transaction ST03G.
    Hence, I can't see the DSR required entries in ST03G.
    Any help?
    Regards,
    Puloma.

    Hi Puloma,
    Please try this link..
    Web AS 6.40 SP9 CCMS fault to post DSR data on STATTRACE and ST03G
    cheers,
    Prashanth
    P.S: Please mark helpful answers

  • Need step by step CCMS Alerts configuration document for PI 7.1

    Hello Experts,
                          I need to configure the CCMS Alerts in our PI 7.1 box. Please provide the step by step configuration document for configuring CCMS Alerts in PI 7.1 System.
    Advance Thanks and Regards,
    Nageswari

    hi Nageswari,
    Configuring CCMS agent for PI is like any other dual stack stystem configure except few PI 7.1 specific configuration.
    You need to install both ABAP & JAVA CCMS agents. Please go through below URL that brief on PI 7.1 required configuration
    https://cw.sdn.sap.com/cw/docs/DOC-43543
    Regards
    Sekhar

  • How to send CCMS alerts to HP Open View

    Hi Everyone,
    My ops center has asked that we send our configured CCMS alerts to Open View.  I have no idea how to do this.  Does/can CCMS generate a log file of the alerts which can be picked up by Open View?  Or, must we do this via an SNMP trap [or am I asking a redudant question!].
    Any help on how to go about this would be most appreciated.  The pressure is on!
    Thanks
    Jennifer

    Hi Jennifer,,
    In oder to send a SAP alert message from SAP CCMS to HP OpenView console you need to install the product from HP called SAP SPI agent on the SAP server where your CCMS is configured. SPI agent is just a list of tranport requested that you need to import into your SAP CCMS, you also need to create a special userid and assign a special SAP roles to this user (these SAP roles delivery by the SPI agent transport request). If you don't own a license for the SAP SPI agent from HP you then just have to used the SAP SNPM trap technology. Check out this HP URL Link for the SAP SPI agent http://h71028.www7.hp.com/ERC/downloads/4AA0-0281ENW.pdf
    Cheers,
    John Hiep Vinh

  • CCMS Alerts in PI 7.1 for adapter engine

    Hi Experts,
    Looking for a step by step process to configure CCMS alerts for adapter engine in PI 7.1

    Hi Shweta,
    >>>Looking for a step by step process to configure CCMS alerts.
    Please see the belog blogs, it might be helpful to you.
    Part u2013 1:
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
    Part - 2:
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
    Part - 3:
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
    Regards,
    P.Rajesh
    Edited by: Rajesh_1113 on Mar 22, 2011 12:58 PM

  • Return receipt for CCMS alert mails

    Hi All,
      I have configured CCMS alert mails from 4.6 system . Mail are sent using SAP mail gateway .
    For every mail received a return receipt is send from lotus notes.
      How do I deactivate this in 4.6 c and also NW 7.0?
    Thanks,
    Suman

    Hi,
    You are correct, i have check a bit deeper and this only has an influence on the status of the message
    Please check if these notes are usefull for you :
    Note 579938 - Composite SAP note on notifications for send status
    Note 485372 - Confirmation of receipts not suppressed
    Note 331265 - Internet mail delivery notification
    Hope this helps
    Rgds
    Nico

  • Reg CCMs Alerts--Time in UTC

    Hi,
    I have configured CCMs alerts and i am getting ma ils
    but i see that the time is in UTC
    I have checked the Time zone settting in CEN and monitored System and it is EST
    Please let me know of how to correct this error
    ALERT for SAP \ server_SAP_90 \ Background \ AbortedJobs at 20090407 200044 ( Time in UTC )
    RED CCMS alert for monitored object AbortedJobs
    Alert Text:Job DEPUY RUN (ID number 16003301) terminated [User 100:SAPSYS]
    System:SAP

    Hi Balaji
    Have you check your OS settings for timezone, also are your system time and time zone different as seen in system settings ?
    Also time zone settings for the user with whom the mail/message dispatch job is running which was scheduled while configuring email autoreactions...not the user sapsys
    Bhudev

Maybe you are looking for

  • I have downloaded the creative cloud desktop app, but the app tab says 'download error', download creative cloud. HOW CAN I FIX THIS

    I am using a mac I want to sign up for a subscription to adobe cc. I have recently used fully used my 30 day trial, and when I decided to purchase it, my creative cloud desktop app wouldn't let me. It kept saying I had no internet connection (I tried

  • Photoshop CS4 performance issue

    HI we use App-V for almost all of our applications and we work with a local cache mode as far as I know - the performance of a local application and the virtual application should be the same even if the package is big. a great example is Office 2010

  • Macbook Won't Turn On - HELP!

    Last night I went to restart my Macbook and it took forever to shut down. Once it shut down, it stayed that way and never restarted. It is fully charged (it barely ever gets unplugged). I tried unplugging it, holding down the start button, and nothin

  • Portal Studio Knowledge Exchange

    I attempted to download a portlet and was greeted by a window explaining that I am not an active member of Knowledge Exchange. It did not tell me HOW to become one. It did provide me with an ACCEPT button which I eagerly clicked on. Then the page ref

  • New email id for Mobileme

    Hi, I am trying to register my iphone4 to mobileme. It as for @me.com email id. I have apple id and don't know hoow to get that email id. Can any one help me to share the link where i can register and get that email id. Thanks