Configure common dist channel and division

hi
how to configure common distribution channel and division
regards
hema

Define Common Distribution Channels
T.Code: VOR1
The master data shared by several distribution channels applies to conditions and customer and material master data.
This helps you minimize the cost of creating and maintaining the master data.
You can also update statistics for each distribution channel and division without creating the master data for the different sub-areas of the organization.
Define Common Divisions
T.code: VOR2
The common master data across various divisions refer to the conditions and the customer master data.
You thus minimize the effort of entering and managing master data.
In addition, you can extrapolate your own statistics per division without having to create master data in the different organizational subareas
regards
AK

Similar Messages

Common Distribution Channel and Divisions

<b>How to configure Common Distribution Channel and Divisions and what is the advantage of the same?</b>

dear sunil
distribution channel
If you do not need the master data (customer / material and condition master data) to
be differentiated according to distribution channels, you have to set up a representative
distribution channel. The master data for the representative distribution channel
applies to all distribution channels for which you have set up this reference in
Customizing.
By doing this, you can minimize the effort of entering and maintaining master data.
In addition, you can update statistics for distribution channels without having to create
master data for the various distribution channels.
Division
T.Code: VOR2 -- Sales and Distribution  Master Data  Define Common Divisions
If you do not need the master data (customer or condition master data) to be
differentiated according to divisions, you have to set up a representative division.
The master data in the representative division applies to all divisions for which you
have set up this reference in Customizing.
By doing this, you can minimize the effort of entering and maintaining master data.
In addition, you can update statistics for divisions without having to create master
data for the various divisions
rewards if it helps
siva

Use of common distribution channel and division in CRM

Hi,
I have a requirement where the customer master will be created in a single dist channel and division combination in ECC and downloaded to CRM. However this customer will be used in different sales area combinations in CRM and ECC.
In ECC there is as standard setting wherein we can refer a sales area to other sales area.
Do we have any such functionality in CRM?
I went through posts and even tried to run Transaction CRMD_DOWNLOAD_SB and CRMD_DOWNLOAD_OM but the tables were not populated in CRM.
For information we are creating the org structure in CRM itself and not generating it from ECC.
Regards,
PP

dear PP,
first, you can have a look the relevant master data division and distr. channels settings in config
here are the paths for CRM 7.0 system config (might be a bit different for previous versions):
spro->customer relationship management->master data->organisational management->division settings
spro->customer relationship management->master data->organisational management->organisational data for sales scenario
and second, the Assignment of Organisational Units from SAP ECC (same CRM spro config):
spro->customer relationship management->master data->organisational management->Assignment of Organisational Units from SAP ECC
please do not forget to check out the Data transfer (just one node lower) : Copy SAP ECC Sales Structure
t-code CRMC_R3_ORG_GENERATE
good luck!
regards,
PPIO

Relation between Sales org , Dist Channel and Division

Hello all ,
I need to know where the relation between Sales Org. , dist channel and Div is stored in CRM . I need to create search help which will get Dist channel and Division for a particular sales orgnization .
Helpful answers will be rewarded .
Thanks ,
Shounak M.

Any Suggestions ?
Thanks ,
Shounak M.

Common Distri channels and Divisions

Dear SD Gurus:
I want to have clarifications pertaining to the maintainance of Common Distri channels and common Divisions: T Code VOR1 and VOR2
The scenario is following:
I have one Sales Organization: ZABC
Distribution Channels : KR, KV, KN, KD
Divisions: TM, TN, TZ
If I have VOR1 as follows:
     ZABC     KR   KR
     ZABC        KV    KR
     ZABC     KN   KR
     ZABC     KD    KR
AND VOR 2 as follows:
ZABC TM   TM
ZABC      TN    TM
ZABC   TZ    TM
1..Would it suffice to share the common master data of Customer Master and Material Master.?
2..Material 1400 created with ZABC and KR channel. Would this be available for all other channels such as KV, KN, KD?
3. OR in addition I will have to do settings in OVAO, OVAM and OVAN? If yes what would be those settings?
4. Also under Assign permitted document types to Sales Areas would it be okay to assign all the doc types to ZABC,KR,TM.? If I try to assign for other divisions it gives error saying that define that sales area as General sales area!!!
I am fully confused. <b>Kindly guide me and take me out of this confusion</b>.

Hi Adiraj,
1)-
To share the master data that config settings which u have mentioned is enuf.
but to share the sales area data by all doc types u need to configure
as combine sales org/combine DC & combine Div.-OVAZ
Ref Sales area would be : ZABC-KR-TM
2)- Yes, that material is available for all other DC's
3)- In
OVAO:
ZABC-ZABC
OVAM:
ZABC-KR-KR
ZABC-KV-KR
ZBAC-KN-KR
OVAN
ZABC TM TM
ZABC TN TM
ZABC TZ TM
Now assign ur sales area (ZABC-KR-TM) to respective sales doc types.
4) Yes itz ok ,the same doc will be allowed for all other sales areas
*Hope its clears, Reward Points

Common distribution channel and division

Hi
Following is the scenario in our Process.
We have Sales Org 1000 % Distribution Channel 10 , 20 & 30
In Define Common distribution Channel screen have maintained following Config
Sorg Dchannel       DchConds       DchCust/Mat
1000 10                  10                    10
1000 20                  10                    10
1000 30                   10                   10
so we have maintained Ref Distribution Channel as 10 for 20 & 30
Now we wish to extend the customer to 1000/20 to main some specific data in certain fields related to that distribution channel. but is giving an error no Sales Area 1000/20/Division could be determined.
We would like to use common ref distribution channel and also if required if specific data is required to be maintined in it should be extended to other disctibution channel.
this will ensure that at the time of preparation of sales documents like sales orders it should check if the customer is extended to that distribution channel if yes it will refer data from that disctribution channel else will refer data from common distribution channel.
Is it possible.
Regards
Sanjeev Bagarai

hi
please common distribution channel , and common division , will you check ,
you enter in distribution channel like this
1000 10 10 10
1000 20 20 20
1000 30 30 30
and also division also , you maintain same think
and also check the enterprise settings for assignment for sales organisation + distribution channel +division
please check this
regards
sankar

Common dist channel and common division

Hai guys,
can any one send me configuration setting and screen shots on common division and common distribution channel in ECC 6 version.
my email id is [email protected]
regards,
Shruthi

Hi Shruthi,
In SPRO -> Sales & Distribution -> Master Data -> Define Common Distribution Channel, you would be able to define a distribution channel as a reference (common).
Similarly in SPRO -> Sales & Distribution -> Master Data -> Define Common Division, you would be able to define a division as a reference (common).
I dont think you should have too much of a problem with the configuration.
Regards
Nadarajah Pratheb

How to know a users company, sales org, dist. channel and division...

Hello Experts,
Is there a way to know which company, sales org, distribution channel and most importantly division a
user is currently affiliated? Really need help on this one guys since I am gonna use it for authorizations.
Thank you guys and take care!

Hi,
If your informations are not in SU03 or XD03, so I think you can't have these informations.
(Maybe with column "Terminal name" in SM04 ?? If this information has been normed in your company)
Regards,
Stéphane.

Common distribution channel and common division

Hi experts,
Wt is the use of common distribution channel and common division in sale prcocess?
let me know wt are the configuration i have to do for common dist chanl and common division activation.
Regards
Ishikesh

Hi
SAP has the concept of common distribution channel for sharing master data( for customer/material and conditions) across multiple distribution channels under a sales orgsnization
That means say if you have the sales org say 1000 and three distribution channels under them say 10,20 and 30
Now you create a common distribution channel say 40 and assign them in VOR1 like this
sales org--DC-common distribution channel for customer/material ---common DC for conditions
1000--1040--
40
1000--2040--
40
1000--3040--
40
Now you can or need to create master data for customer/material and conditions only for DC 40
There is no need to create separate master records for 10 and 20 and 30 distribution channel's
That one master record created for DC 40 will solve the purpose for 10 and 20 and 30 distribution channel's
*When you create a sales order for the distribution channel say 10 system will check whether that customer is created for DC 40 and material is created for DC 40 and condition record is valid in DC 40*
Similarly for distribution channels 20 and 30 also system will check whether that customer is created for DC 40 and material is created for DC 40 and condition record is valid in DC 40
That means whenever you say DC as 10/20/30 in sales order system will take that as DC 40 and whatever is valid for DC 40 will be applicable for 10/20/30
Instead of three master records one record in the name of DC 40 is sufficient
Similarly for common division but with a difference
The common divisions is for customer and conditions only not for materials
You can see this in VOR2 go to VOR2 t code and observe the difference of that with VOR1
This is a key assignment in SAP and without this being defined you cannot create CMR, or MMR or condition record and one in t codes VOR1 common distribution channel and VOR2 common division
This is a fundamental basic concept any SD consultant should be very clear in his mind
Regards
Raja

Common Distribution Channels and Common Division

Hi experts,
We are encoutering an error and i think its because of common distribution channels and common divisions.
1:IN Development client we can see the common distribution channels and common divisions setup. But no one says he/she has set them up. Is it possible that the enterprise structure settings filter to this?? May be weird doubt but i wanna make sure.
2: If they are setup in Development , there should be a transport request and am unable to see any??
3: If we need the same settings in Test, We will have to set them up in Test client or we can move the transports from DEV to TEST for these settings??
4:And also if these are not setup , do we get an error while creating customers and materials for sales areas?
Please Advice.
Thanks & Regards
Sai

1. Defining Common Distribution Channels for Master Data
Use
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Distribution Channels
Transaction Code: VOR1
2. Defining Common Divisions for Master DataUse
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Division
Transaction Code: VOR2
1:IN Development client we can see the common distribution channels and common divisions setup. But no one says he/she has set them up. Is it possible that the enterprise structure settings filter to this?? May be weird doubt but i wanna make sure.
2: If they are setup in Development , there should be a transport request and am unable to see any??
3: If we need the same settings in Test, We will have to set them up in Test client or we can move the transports from DEV to TEST for these settings??
4:And also if these are not setup , do we get an error while creating customers and materials for sales areas?
Configuration of common distribution channels and common divisions is a required setting, else it will give an error for Customer & Material Master. This setting has to be done in Development Server & transported to Test & Production Server. If you do not find Transport request, then try to do change in configuration & redo the correct configuration & save the Transport Request.
Hope the above is helpful to you.
Regards, Rajesh Banka

Distribution Channel and Division in STO

Hi All,
We are have a STO senario.We are also using the common distribution channel and common division.However when we create an Invoice with the delivery created the system is picking up the common division not the material division. In delivery also in the line item of the in delivery shows 00( cross division) and not the division of the material from the material master.
We have configure the Shipping data for plant with common division and common distribution channel.
We want the system should pick the material division compared to common division.
Kindly guide us on the issue.
Regards
Rajev

We also search the forum and found one thread
Material division in Intercompany STO Invoice
But is not helpful for us.
Regards
Rajev

Common distribution channel and devision

hi expert
i have one sales organization-0001 three Distribution channel- 01,common distribution channel,02-distribution channel,03-distribution channel and 4 divisions. Hz-common divisions.,Oz,AZ,CZ. so my clients requirement is he wants to create customer master and material master record will be created sales organization 0001. distribution channel --01,02,03 and common division 00 and material master should be sales organization 0001, distribution channel 00 ( common distribution channel) and all division and sales order should be sales organization 0001 and all distribution channel and all division. plz giv me the solution as soon as possible.
Edited by: rajeshm on Mar 30, 2010 11:44 AM

hi thanks for your my i have one sales organization 1000 and distribution channel00 for common and D1 d7 totally 7 distribution channel and 8 division so how can i maintained in vor1 my clients requirement is customer master should be prepared in all (00--- d7 ) distribution channel and material master was prepared in only 00 distribution channel and sales order should be maintain all distribution channel and all division.

Risk on wrong definition of sales organization, distribution channel and division

Hi,
our organization just started to implement SAP and SD module is one of the subject to complete.
We are in the defining phase of the above subject but I still can not understand the risk of being miss-defining the sales organization, distribution channel and division. Is it true will only impacting the pricing and reporting only? Are there going to be future impact on this?
Thank you before for your explanation.
Andy

Hi Andy,
Good to see the suggestions!
These are the rules I try to follow:
Do not over do it. Simple is better and facilitates change.
One sales organization for each company code unless significant differences exist between independent sales departments. Like one wants to use CRM and others won't. It's roughly equivalent to one by each top level sales director.
One distribution channel for each sales channel group that defines different prices or different shipping conditions for the same material. Like retail and wholesale have different pricing. Special rules can apply like mail delivery require different correspondence settings.
One division for each division of the company. If company has no clearly defined divisions (like Aeronautics and Footwear) there is no need (in sales) to split (it might in financials).
Using sales office and sales group for reporting is a lot better than the top level structures because it's easy to change them in master data, unlike sales org or distribution channel. And when departments get reorganized the system effort is significantly reduced if no change occurs at those three top levels.
So I normally use the sales office to the first or second level of reporting and sales group in some cases to represent individual sales persons or nothing at all in other cases.
regards,
Edgar

Change of Distribution Channel and Division

Good day, everyone!
Is there a transaction code that will allow me to change the distribution channel and division of the material?
Thank you.

Division can be changed with MM02.
But distribution channel is a key for the sales data. You can only flag the existing sales data for deletion in MM06 and create new sales data with MM01.

Get Sales organisation and Corresponding Distribution channel and Division

Hello,
My requirement is to is to retrieve Sales organisation and Corresponding Distribution channel and Division.
Was going through the thread : [sales organization and distribution channel |Re: sales organization and distribution channel;
to find the FM : CRM_BUPA_SALES_AREA_GET_ALL.
I do not have a CRM system to check what this FM does.
Is there any similar function module?
Regards,
Remi

Hi,
Based on what data you want to retrieve thsese fields?
Can you please give more details on your requirement?
I think from table KNVV you will get these info.
Best Regards,
Deepa Kulkarni

Configure common dist channel and division

Similar Messages

Maybe you are looking for