Configure Coverage Profile and other

I have question regarding coverage profile configuration.
- To configure coverage profile for safety stock, can I put it in decimal e.g. 1.5 days to cover safety stock level as it would impact the rest of production planning process?
Thank you very much.

Dear
Coverage Profile and Forecast profile are two different subject  !
If it is range of coverage profile , then The range of coverage profile contains the parameters for calculating the dynamic safety stock. This is a statistical calculation on the basis of average daily requirements.With the dynamic safety stock, you can determine a safety stock based on requirements and range of coverage. The dynamic safety stock adapts automatically to the changed requirements and is fully available for planning purposes. You can limit the quantities used in the calculation of the dynamic safety stock by defining maximum and minimum ranges of coverage. You can also limit the period of time by defining different time periods in which the range of coverage is valid.
I hope you are asking about saferty caverage profile,,here basicalli we are setting the system to see how the safety stock is to be covered and calculated.See the help link below and come back if required
http://help.sap.com/saphelp_47x200/helpdata/en/f3/dbbb16b36111d1a6770000e83235d4/frameset.htm
https://wiki.sdn.sap.com/wiki/display/ERPLO/Dynamicsafetystock+calculation
Where as Forecasting Profile , please refer the below :
Profiles
One more query : Also the MRP type used here is a copy of the PD MRP type and not VV or VS.
I think you should use Forecast Base MRP type like VV  rather PD.PD does not carry out any Forcasting Functionality .Please check wether you replicate PD from VV , then it is possible to execute Forecast specially Total Consumption set up in MRP type .
Hope this will be useful
Regards
JH

Similar Messages

  • Coverage profile and Forecast profile together

    Dear all,
    Can we use coverage profile and forecast profile together.What are the requirements for the same.
    We are using coverage profile with following details
    No. of periods=20
    Type of period per length=1
    Range of coverage in first period= 10
    The forecast profile is set for
    Historical periods=12
    Initialisation period=2(Automatic,X)
    Periods /season=12
    Forecast periods=12
    with different weighting groups.
    But whenever forecasting is executed with some historical data for the 3 profiles it is giving same forecast values for all 3 profiles with different weighting groups.
    Also the MRP type used here is a copy of the PD MRP type and not VV or VS.
    Where can the problem lie?
    Regards
    Manisha

    Dear
    Coverage Profile and Forecast profile are two different subject  !
    If it is range of coverage profile , then The range of coverage profile contains the parameters for calculating the dynamic safety stock. This is a statistical calculation on the basis of average daily requirements.With the dynamic safety stock, you can determine a safety stock based on requirements and range of coverage. The dynamic safety stock adapts automatically to the changed requirements and is fully available for planning purposes. You can limit the quantities used in the calculation of the dynamic safety stock by defining maximum and minimum ranges of coverage. You can also limit the period of time by defining different time periods in which the range of coverage is valid.
    I hope you are asking about saferty caverage profile,,here basicalli we are setting the system to see how the safety stock is to be covered and calculated.See the help link below and come back if required
    http://help.sap.com/saphelp_47x200/helpdata/en/f3/dbbb16b36111d1a6770000e83235d4/frameset.htm
    https://wiki.sdn.sap.com/wiki/display/ERPLO/Dynamicsafetystock+calculation
    Where as Forecasting Profile , please refer the below :
    Profiles
    One more query : Also the MRP type used here is a copy of the PD MRP type and not VV or VS.
    I think you should use Forecast Base MRP type like VV  rather PD.PD does not carry out any Forcasting Functionality .Please check wether you replicate PD from VV , then it is possible to execute Forecast specially Total Consumption set up in MRP type .
    Hope this will be useful
    Regards
    JH

  • Coverage profile and Stime period profile in MRP

    Can anyone explain what is the importance of coverage profile and safety time period profile in MRP2 view and what is their implication in MRP and SOP ?

    Hi,
    Coverage profile is used in Material Requirements Planning for calculation of dynamic safety stock. This dynamic safety stock is calculated by using formula: Average daily req*range of coverage.
    Average daily req is calculated by considering requirements in specific periods and no of days for the total period length.
    You can find all the setting in
    MRP--> Planning-> MRP Calculation---->Define range of coverage profile.
    e.g.
    You have maintained in coverage profile:
    Period indicator: W(week)
    Number of periods to be considered for ADR: 2
    Period length: Standard days (5 days)
    Range of coverage: 5 days
    Req for 1st week: 1000
    Req for 2nd week: 1000
    then Ave daily req.= (1000+1000)/(5 period length*2 no. of periods)=200
    then Dynamic safety stock= 200 (ADR)*  5(range of coverage)=1000
    Hope you got it.
    Sachin

  • Coverage profile and fx lot size.

    Dear All
    I have a material with coverage profile (MRP2 view)
    I have an issue during MRP run in MD03 with this material.
    IN material there are folowing parameters
    MRP type : PD
    Lot size : FX
    Fixed lot size : 24
    So, In MD03 I get the following:
    Per./segmt     PldIndReqs     Requirements      Receipts     Avail. quantity      ATP quantity      Actl cov.     Stat. cov.     Daily reqs      Trget cvge      MaxCv     Min.covge      Target stck Minimum stock     Maximum stock
    30.10.2011     0     -10,421      0     120,457      0      14     11,6     10,421      17      20     9      177,157     93,789     208,42
    31.10.2011     0     -10,421      0     110,036      0      13     10,6     10,421      17      20     9      177,157     93,789     208,42
    01.11.2011     0     -8,445      0     101,591      0      12     12,4     8,164      17      20     9      138,788     73,476     163,28
    02.11.2011     0     -8,445      0     93,146      0      11     11,4     8,164      17      20     9      138,788     73,476     163,28
    03.11.2011     0     -8,445      0     84,701      0      10     10,4     8,164      17      20     9      138,788     73,476     163,28
    04.11.2011     0     -8,445      72     148,256      0      18,6     18,2     8,164      17      20     9      138,788     73,476     163,28
    05.11.2011     0     -8,445      0     139,811      0      17,6     17,1     8,164      17      20     9      138,788     73,476     163,28
    06.11.2011     0     -8,445      0     131,366      0      16,6     16,1     8,164      17      20     9      138,788     73,476     163,28
    07.11.2011     0     -8,445      0     122,921      0      15,6     15,1     8,164      17      20     9      138,788     73,476     163,28
    08.11.2011     0     -8,445      0     114,476      0      14,6     14     8,164      17      20     9      138,788     73,476     163,28
    Link: [imageshack.us/photo/my-images/33/35632293.jpg]
    <a href="http://imageshack.us/photo/my-images/33/35632293.jpg/">[IMG]http://img33.imageshack.us/img33/7832/35632293.jpg[/IMG]</a>
    MD03 generated purchase requisition on 04.11.2011 for 72 pcs.
    As you can see the available quantity of material on 04.04.11 will be 84,701 - 8,445 = 76,256. That is more than Minimum stock( 73,476)
    Can you suggest why system creates purchase requisitions on 04.11.2011 but not on 05.11.2011
    I can only assume that it's a one more feature of MRP. It calculates dates and quantitys to be procured as lot size EX was set in material master record and doesn't take into account increasing of stock due to FX lot size.
    P.S. When I clear coverage profile in material master , SAP generates pur.requisitions correctly.

    OK, now it is more clear.
    First you should know that only target is doing a real impact. Min and Max are just for display.
    Since you have period as month, looking at it on daily resolution is not relevant, you should look at months. You can also see on your daily display that target stock level will only change at month turn.
    Hope that it makes it now easier for you to understand the system's calculation.

  • Configuring PerformancePoint Service and other BI when you're on an O365 Sharepoint site

    Sharepoint online is great. Easy to use. relatively stable. But I cannot find any protocol, in absence of having access to Central Administration (how I wish I did), to configure PPS and other elements I need to begin leveraging reporting and dashboards.
    Does anyone know how I do this? Do I have to hand feed the steps to some CIM Sharepoint Tier engineer to execute for me? Or is there another way.

    O365 does not support the traditional BI features (PerformancePoint, Excel Services with connected data sources, PowerPivot to external data sources, etc). The reasons for this are numerous (no connections back to data centers, use of claim tokens, use of
    shared webapps and therefore shared app pool accounts, etc).
    For several reasons, this is why MS is pushing "PowerBI", which is a separate half-answer to the whole hosted BI issue. But this is NOT the same as PPS/etc.
    If you want BI, you need on-prem (or hybrid, where the BI components are on-prem).
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Configuration Manager - Profiles and rules.

    Is it possible to setup a global rule on a meta field that has a group header.
    And create a profile that hides the group header if the meta field is excluded or set to Hidden?
    When I try this in 7.5.1 the group header is still displayed even though the meta field it is assigned to is hidden.
    I guess I could write some idoc to std_field_group_header?
    But am I missing any thing with the conf manager...
    Thanks :)

    I think your right Mikey; I just ended up creating 2 rules which weren`t global and applying the rule with the header when it was required to a profile.
    J.

  • Deleting Master and other Forecast Profiles

    Hi all,
         I would like to delete some of the Master Forecast Profiles and other Univariate forecast Profiles I have created using the transaction "Maintain Forecast Profiles".
    Can you guide me on How I could Possibly DELETE them?
    Any help is much appreciated.. Thank you.
    ANU.

    Hi Anu,
    In the transaction /sapapo/mc96b load the Master forecast profile you want to delete. Note that you have to select the right Planning Area to load the Master Forecast profile. Once you have loaded the MF Profile. Go to "Edit" in the top and in the drop down you will have delete master forecast profile. Say yes in the following screen and you would be able to delete the Master forecast profile.
    Regards
    Kesavan

  • Partner Profile and its configuration.

    Hi all,
    I am creating an SD IDoc using EDI and send it between two servers.
    I need to know what is a partner profile and why should we create it.
    what are the steps to be followed in maintaining a partner profile and its configuration.
    Any pointers will be highly apppreciated.
    Thanks in advance,
    Regards,
    Jose
    Edited by: Jose Anthony Reddy on Dec 17, 2007 11:23 PM

    Hi Jose,
    Below is a material you can go through .
    Creating an Outbound Partner Profile
    Here you must enter the data manually. Alternatively, you can also transfer the default values from Customizing.
    If you are not yet on the change screen of your desired partner, choose SAP Menu ® Tools ® IDoc Interface/ALE ® Administration ® Runtime Settings ® Partner Agreement (WE20).
    1. Position the mouse on your partner in the required partner type node. Choose in the Outbound Parameter table.
    Key Fields
    2. You have already determined partner number and partner type in general partner processing. The partner function from the master data defines the addressee, that is, it is used for further classification purposes. If you have selected outbound processing under Message Control (MC), the function must be identical to the corresponding Message Control field. Otherwise, it is optional.
    Partner A (customer 1110) wants to order a material from partner B (vendor 1014). Partner B is of the partner type “LI” (vendor) and must choose the Message Control value “VD” (vendor) as the partner function because orders must always be processed using Message Control.
    3. Specify the business process with the “logical” message, within which the IDoc type is used. The logical message is described by three parameters: The message type is based on EDIFACT message types: For example, a purchase order is of type “ORDERS”. You can further divide the message type with the optional fields message code and message function.
    4. Configure the test indicator if you want to send the message as a test.
    Message, partner and test indicator are the seven key fields of the outbound partner profiles (the client comes in addition to these). Also see the graphic at the end of this section.
    Other Fields
    5. In the Outbound options tab page, you can determine whether IDocs are forwarded immediately to the receiving system. You should ensure that your entries are compatible with the Message Control priorities, if you have chosen outbound processing under Message Control. A list of recommended combinations is provided in the section Outbound Processing Under MC: Procedure.
    6. You have already defined the Recipient port in Port definition.
    7. If a port of type TRFC is used, the Queue Processing field is visible. You can use the indicator to specify whether IDocs are to be sent with qRFC. This sending technique is only possible for recipient SAP systems as of SAP Web AS 6.20.
    You should only set this flag if it is really necessary that the IDocs sent are received in the receiving system in the same sequence as they were sent by the sender system. Queuing can cause posting delays in the receiving system, because an IDoc in the queue cannot be posted. In this case, the following IDocs in the queue cannot be posted until the error is resolved.
    8. If you have set the Queue Processing indicator, the Rule Name field, which you must then also maintain, appears as well. The rule name defines the rules for queue names. You can specify these rules in the transaction qRFC IDoc Queue Name Rules (WE85).
    9. Specify the IDoc type as the Basic type with or without extension. If you want to use a view of your IDoc type (for example, to improve the performance), specify this here.
    The figure below shows the m-to-n relationship between logical messages (business meaning) and IDoc types (technical format). Message 1, for example, is always assigned to one IDoc type, while message 3 is assigned to two IDoc types. IDoc type 2, in turn, is also assigned to 2 logical messages.
    10. The segment release specifies the release from which the segment definitions (not the IDoc type definition) originates. We recommend that you leave this field blank so that the most recent segment definition is used.
    11. You can propose an EDI standard, version and EDI message type for the receiving system in the tab page EDI Standard. Most subsystems, however, should be able to determine these EDI settings themselves (from the logical message).
    12. You can define permitted agents for cases in which exceptions occur. This entry overrides the entry in the general partner profiles. Depending on the message, therefore, the exception can be handled by different agents of the same partner.
    13. You can specify whether syntax errors are to be ignored or are to lead to a processing error (Cancel Processing flag under syntax check in the tab page outbound options). For more information about exception handling and permitted agents, refer to the following section: Exception Handling
    14. If your hardware supports it, create partner and message specific telephony data for outbound IDocs. For more information, see General Partner Profile.
    Graphic: Outbound partner profile fields (general)
    Key fields are shown in gray. The values for partner, message and test indicator (and client) therefore provide a unique ID for the IDoc type in outbound processing.
    Regards,
    Praveen

  • How can we transport the partner profiles and Port configurations

    Hi everybody,
    How can we transport the partner profiles and Port configurations. While creating these , system will not ask for Dev class and we cant assign any Transport request number. Then How can we transport these settings?
    Your replies are really apreciable.
    Thanks and Regards,
    Vijay.

    Hi,
    please have a look of the OSS note: 182172
    >>
    The partner profiles are stored in the following tables:
    Table EDPP1: General partner profile
    Table EDP12: Partner profile outbound, additional data NAST
    Table EDP13: Partner profile outbound
    Table EDP21: Partner profile inbound
    Table EDIPHONE: Connection to SAP telephony (optional)
    You can use R3TR TABU to manually set the tables into a Customizing request (as of Release 46, into a SYST-type request).
    <<
    Rgd
    Frédéric

  • What do you mean by Time profile and how to configure it.

    Hi Gurus,
    can anybody tel me what do you mean by Time profile and how to configure it.
    we are using Capacity requiremtn planning.
    best regards
    prashanth

    Hi Prashanth,
    Time profile can be customized using transaction OPD2.
    It contains the time horizons for importing the data records as well as for evaluation and planning.
    the planning horizon must be smaller or equal to the database read period.
    SAPPM_Z002 is a sample time profile
    The list profile defines teh presentaion of the output lists,transaction used is OPDH.
    best regards
    vijay

  • Send pdf or photo via email and mailboxes configured via profile configuration (iPCU)

    We have bought 2000 ipads, and have pushed a profil config file to them.
    In this profile, we configured exchange mailboxes for each users. It works fine, BUT, when we tried to send a pdf or photo file from IOS menu, it tells me that there is no mailbox configured on it and bring me to the menu to configure one and I can check that the mail box is configured on it !!
    Please help, it is urgent and can affect the project....

    Hi Biju !
    Thanks for the response but I think you missed the point here. I am using different output types for RFQ and PO as well as different custom smart forms and we are using the same custom print program to generate output for both.
    The issue is with the print program and not the output type as I mentioned that I have already got this thing working on our IDES using the standard print program and standard forms.
    Tomas Talpa's response seems to be helpful. I'll get my technical consultant to amend the code accordingly and see if it works.
    Regards,
    SaaD Karim Mallick.

  • How to push EAP-TLS configuration Profile and Certificates to Mac books and Iphones

    Hi Team,
    We were able to push the EAP-TLS configuration profiles and certificates to windows devices via group policy.  However, we're now looking to see how we can accomplish this for Mac book and iphones?  Is there an open source application or something we can leverage to do this?
    Thanks

    I think ammahend was looking for a rough count which is what my question was going to be. The reason I would ask this is that if the device count is low then you could manually provision certs on those devices. Not ideal since you will have to manually generate CSRs, get them signed and then installed on the machines.
    Another way to do this is if you have an MDM solution in place. You can have the MDM integrate with your CA via SCEP and then on-board devices that way. You don't have to integrate ISE with MDM (advanced licenses needed) as you can only have ISE check for the cert and only perform EAP-TLS authentications. 
    Hope this helps!
    Thank you for rating helpful posts! 

  • How do I configure CTM for Coverage Profile days of ECC6.

    Dear Srinivas Krishnamurthy,
    Will you please provide some guidelines or procedure on CTM to make use of Saftry time indicator and safety cvoverage period, which will pre-pone the requirement to that many days (Coverage profile), where the PR or Planned order will be generated in previous to that many number of days from the month requirement is entered and this will get added to the fallen month requirements.
    I am completly new to CTM.
    Thanks in advance.
    With regards,
    Ram Mohan Rao Kolanupaka.

    Please check threads
    Safety stock planning with CTM
    CTM - Safety days' supply
    CTM does use the safety days of supply as a buffer time between the demand and supply element.
    For beginners, it might make also sense to go over
    http://help.sap.com/saphelp_scm50/helpdata/en/ac/167439aa16f24ee10000000a11402f/frameset.htm

  • After updating to Firefox 7.0.1, menu bar for Google,yahoo, Facebook (message,notification,profile,home) and others site are disabled. How can solve this problem?

    after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
    How can I solve this problem?

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • W7: User Profile Service service failed at log on: Apparently W7 is no longer creating any user profile data other than username and picture.

    First time poster, but I think I've done my homework on this issue.
    This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
    However, it is definitely not the same issue (see further).
    Current Config:
    HP dv7-1450.
    W7 RC 7100 x64
    Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
    Running with Admin account while diagnosing/troubleshooting.
    Currently have two working accounts, one standard, one admin.
    Symptom:
    New user accounts cannot be logged into.  On an attempted login to the new account, the following information is displayed on the login screen:  "The User Profile Service service failed the logon.  User profile cannot be loaded."  Windows then logs off the operator and returns to the initial user selection screen.  All other aspects of use are normal.
    Current Diagnostics:
    First attempts to resolve this problem were to recreate the new account.  This was attempted when logged in as both Standard and Admin.  This was also attempted under safe mode.  This has been attempted with virus protection disabled.  All to no difference in the symptom.
    The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link).  Unlike that issue, there simply is no entry for the new user.  Examination of the new log entries from creation of account to attempted log in provides the following entries:
    Level Date and Time Source Event ID Task Category
    Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
    Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
    Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
    Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
    Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
    DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
    Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
    DETAIL - Access is denied.
    Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
    Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
    DETAIL - Access is denied.
    Naturally I started with the earliest error first, and decided to look to see what is going on.  The file that is trying to be copied is there, but the destination folder does not exist.  As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation.  Specifically I suspect it may not be able to create the appropriate folders before performing the copy.  Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs.  Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
    I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile).  The following two (unhelpful to me) log entries were generated.
    Level Date and Time Source Event ID Task Category
    Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    The message id for the desired message could not be found
    Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated.  I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
    There's the info.  I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log.  I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
    Thanks in advance to responders!

    First time poster, but I think I've done my homework on this issue.
    This issue has similar symptoms to a problem with vista: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
    However, it is definitely not the same issue (see further).
    Current Config:
    HP dv7-1450.
    W7 RC 7100 x64
    Last update (up to date as of 8/31/09) installed succesfully 8/26/09 and should be unrelated to this issue (not verified yet by a pre-update restore).
    Running with Admin account while diagnosing/troubleshooting.
    Currently have two working accounts, one standard, one admin.
    Symptom:
    New user accounts cannot be logged into.  On an attempted login to the new account, the following information is displayed on the login screen:  "The User Profile Service service failed the logon.  User profile cannot be loaded."  Windows then logs off the operator and returns to the initial user selection screen.  All other aspects of use are normal.
    Current Diagnostics:
    First attempts to resolve this problem were to recreate the new account.  This was attempted when logged in as both Standard and Admin.  This was also attempted under safe mode.  This has been attempted with virus protection disabled.  All to no difference in the symptom.
    The similarity to the Vista issue (linked above) caused me to check the registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ for the new profile (as suggested by that link).  Unlike that issue, there simply is no entry for the new user.  Examination of the new log entries from creation of account to attempted log in provides the following entries:
    Level Date and Time Source Event ID Task Category
    Information 8/31/2009 12:34:31 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
    Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Profiles> failed a notification event.
    Information 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6000 None The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
    Warning 8/31/2009 12:34:11 PM Microsoft-Windows-Winlogon 6001 None The winlogon notification subscriber <Sens> failed a notification event.
    Error 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1500 None "Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly.
    DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
    Warning 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
    DETAIL - Access is denied.
    Error 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1511 None Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
    Warning 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles General 1509 None "Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to location C:\Users\{New Username}\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm. This error may be caused by network problems or insufficient security rights.
    DETAIL - Access is denied.
    Naturally I started with the earliest error first, and decided to look to see what is going on.  The file that is trying to be copied is there, but the destination folder does not exist.  As near as I can tell, whatever process (the User Profiles General Service?) is trying to perform the copy does not have sufficient access to perform the operation.  Specifically I suspect it may not be able to create the appropriate folders before performing the copy.  Interestingly, it appears that when windows attempts to open/create a temporary account profile, the same issue occurs.  Since there is no registry entry either, I suspect that the issue also extends to the creation of registry keys, but I am not familiar enough with the sequence of events in the creation of a user profile to determine if this would come before or after a user profile's first login.
    I attempted to find more information, and was able to investigate the UPS diagnostic event log (for a different, but identical attempt at creating and using the new profile).  The following two (unhelpful to me) log entries were generated.
    Level Date and Time Source Event ID Task Category
    Information 8/31/2009 12:34:10 PM Microsoft-Windows-User Profiles Service 1002 (1001) "The description for Event ID 1002 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    The message id for the desired message could not be found
    Information 8/31/2009 12:34:09 PM Microsoft-Windows-User Profiles Service 1001 (1001) "The description for Event ID 1001 from source Microsoft-Windows-User Profiles Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    It seems to imply that the User Profiles Service may be corrupted, but this may also be unrelated.  I do not know how to specifically repair this service anyway (but am open to try it if someone can walk me through it a bit).
    There's the info.  I'd like to figure out how to watch the account creation process in more detail to see if I gleen more, but I don't have the experience to know what to do to enable such a log.  I will not perform a reinstall and am loath to do a restore, instead looking more for a cause and effect repair: something that would actually help MS fix the problem rather than have the customer fix the symptom.
    Thanks in advance to responders!
    To resolve this issue, I suggst you delete the file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm.Arthur Xie - MSFT

Maybe you are looking for