Configure CTS+ - WebDynpro Exception
Hi Gurus,
I want to configure CTS+ and followed the How-to-Guide to set up CTS+ in a Portal Environment. At step 3.2.2 - Activating the Service - I wanted to test the service sodis_core_wbo as described in the Guide but I get a shortdump.
WebDynpro Exception: The Applikation SODIS_CORE_WBO does not exist.
The service could be activated without any problems but the test doesn't work.
Any ideas?
Thank you for your help.
Best Regards
Ines
PS: The Solution Manager is version 7.0. SPS 16
Hi,
As you have mentioned SP level is 17.
Please refer the following note.
Above SPS12 there is no Webdynpro component SODIS_CORE_WBO it is CTS_BROWSER
Please use CTS_BROWSER.
Refer the following note: 1145268
Thanks & Regards,
Balaji.S
Similar Messages
-
WebDynpro Exception: ADS: Request start time, start Interactive Form
Hello everybody,
I tried out to display an interactive form in Web Dynpro for ABAP like in Thomas Jungs video described. But I when I start my application I get everytime the dump.
I read not 944221 and and thats works all. But when I try the testprogram with my form I get the dump, too.
So any help for me?
regards,
Christian
The dump is:
WebDynpro Exception: ADS: Request start time: Timestamp
with this last calls:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CPHi Danny,
please check in your visual administrator the credential file for Reader Rights. See also the point "Installing and Configuring Credentials" in the Adobe Document Services Configuration Guide and note 736902.
Regards,
Christian -
WebDynpro Exception in MSS BP IView
Hi,
I am getting the following webdynpro exception for one of the WebDynpro IViews present in MSS Package, any help to resolve this would be highly appreciated
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow selecting all content, copying it and then pasting it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcEffortReportingInterface.Hrxss_Us_Effr_Get_Derivation_Input.It_Cobl_Ex): structure field Zz1Heiko not found
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:299)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:670)
at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:233)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:654)
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:657)
... 65 moreDear Raja,
I loggged into Visual Admin to change the value of sap.ADSCallingMode", from "http" to "soap. but that particular property is not maintained in the default property sheet in the following path
Server -> Services -> Configuration Adapter -> webdynpro -> sap.com -> tcwddispwda.
but you can see in the error trace i have given above that it is a SOAP based request. I am on EP 6 SP 9; will I have to upgrade or is it any other problem?
Regards,
Shyam -
WebDynpro Exception running Interactive Form example
Hi everyone,
I created an interactive form via Transaction SFP. After that I used this form in a Webdynpro for ACAP application.
When I try to run the application I get the following error:
Note
The following error text was processed in the system E60 : WebDynpro Exception:
The error occurred on the application server de3003dc_E60_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CP
What I tried:
- Program FP_TEST_00 runs successfully, I receive the version number.
- I went through the ADS Configuration Guide. All settings are done.
- The test on Java Stack works: http://server:port/AdobeDocumentServices/Config
We're on SP 10 with NW2004s(NW7.0).
Best regards,
OlafAjay,
You was right to some extent...We have started the ADS Web service.
Now, We have a different error mentioned below,
<b>The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Error during call to AdobeDocumentServer: Failed to create a Data Manager. Please ensure that the Document Services Data Manager service is running: com.adobe.FailedCreationException
at com.sap.tc.webdynpro.clientserver.adobe.AdobeFormHelper.createPDFDocumentForUIElement(AdobeFormHelper.java:486)
at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:185)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterHandleActionEvent(ClientApplication.java:1154)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:402)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649)
</b>
although we have restarted Data Manager Service,the exception remained...
What may be the reason??
I have already awarded you...
Sugata -
SOAP Error, ADS,WEBDYNPRO EXCEPTION
Hi All,
Im very new to this ADS.I have two issues with in my landscape regards to ADS
1st issue
BI has integrated ADS(as of my bw consultant,which was working before) he tried applying some SNOTE and he got SOAP ERROR(i have seen quiet few thhreads here but did not help me much).
ERROR:SOAP runtime exception:CSoapExceptionTransport(100101).
i have gone through tests and they all seems to be fine.
i logged into visual admin to check the box "no password change required" but this is disabled so i cant tick the box
i logged into bw system and found adsuser as dialog user?
help me out pls.
2nd issue:
we also have standalone ADS(as java) system.
our CRM system is integrated to ADS system and here the user is getting the following error
"Webdynpro Exception:The ADS call has failed". I did tests and they seems to be fine.
*I logged into USERADMIN in ads and tried finding SAP_ADSCALLER role but could not find it either*
can anyone of you help me out in resolving these issues pls
regards
Raj
Edited by: raj p on Oct 2, 2008 3:53 PM
Edited by: raj p on Oct 2, 2008 4:07 PMADS Installation and configuration:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
Troubleshooting for ADS configuration:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?quicklink=index&overridelayout=true
Landscape with ADS:
http://csc-studentweb.lr.edu/swp/Berg/Conferences/SAP_NW2008_and_Admin_2008/BI/Track13/Track13_Session4.pdf
ADS tests
http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm
Hope that helps, Otto -
WebDynpro Exception: ADS call failed SOAP Framework error:
Hi,
Can help me with this error:
WebDynpro Exception: ADS call failed SOAP Framework error: SOAP Runtime Exception: CSoapExceptionFault : SOAP fault found in SOAP document /Transaction system failure in method rpData./<ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1="http://sap-j2ee-engine/client-runtime-error">Transaction(100.102).
Thank youADS Installation and configuration:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
Troubleshooting for ADS configuration:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?quicklink=index&overridelayout=true
Landscape with ADS:
http://csc-studentweb.lr.edu/swp/Berg/Conferences/SAP_NW2008_and_Admin_2008/BI/Track13/Track13_Session4.pdf
ADS tests
http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f31e3082221595e10000000a1553f7/content.htm
Hope that helps, Otto -
WebDynpro Exception: The ADS call has failed. You can find information abo
hi,
I have created the From .
when i try to run the application .i am getting the folllowing error .
Is there any solution for that?
WebDynpro Exception: The ADS call has failed. You can find information about the cause in the error.pdf on the application server.
Regards
Vivekananthan.SIt sounds like your system is not properly configured for the connection to the Adobe Document Services. Have your system admins confirm the setup. Look for the error.pdf document mentioned in the exception for more details on the actual cause of the error. This error message is generic and could be caused by several different conditions - almost all of which are related to incomplete or incorrect configuration of the ADS/ADS Connectivity.
-
How to configure CTS+ for Solution Manager for XI 3.0
Hi ,
We are working on XI 3.0 SP 20 and Doing a file system based transport of .TPZ files. We observed that there is a possibilit of misssing the objects while tranporting. So we are planning to set CTS+ with our Solution Manager.
Question:
1. Can we configure CTS+ through the latest version of Solution Manager for XI 3.0 landscape?
If Yes .. How? If No... Why?
2. Is there any way to make the the transport automated like ABAP tranports.
If there is.... Please send the link or documents..
Thanks
ManojHi Venkat,
Thank you for the Demo. The Demo gives me information about the CTS+ setup. I am looking for the compatability of CTS+ for XI 3.0.
We have Solution Manager 7.1 setup in place.
Please let us know if we can setup CTS+ on solution Manager (7.01 EHP1) and use it to transport XI 3.0 SP20 IR/ID objects across the XI landscape.
Regards,
Manoj -
Difference between component configuration and application configuration in webdynpro
what is the difference between component configuration and application configuration in webdynpro?
Hi Rohit,
With the component configuration, you can control the behavior of each individual component within a Web Dynpro application or the user interface of individual views. For each component, several records of configuration data can be created.
Using the application configuration, it is now possible to assign the configuration required in the current application to all the components used.
In short : Component Config belongs to WDP Component and Appl'n Config. belongs to WDP Appl'n.
Check this document for more information.
Web Dynpro for ABAP - Component and Application Configuration
Thanks
KH -
WebDynpro Exception: IDs with Namespace Must Have the Format / namespace /
Hi Experts,
Can you please help me with this:
I get the following error when I execute a webdynpro application. Can you please let me know where do
I need to look to verify the <namespace> and <id>.
Error when processing your request
What has happened?
The URL http://sapdev.tfi.local:8000/sap/bc/webdynpro/sap/z_temp_disp_mara/ was not called due to an error.
Note
The following error text was processed in the system DEV : WebDynpro Exception: IDs with Namespace Must Have the Format /<namespace>/<id>
The error occurred on the application server sapdev_DEV_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CONSTRUCTOR of program CL_WDR_VIEW_ELEMENT===========CP
Method: CONSTRUCTOR of program CL_WD_TABLE_COLUMN============CP
Method: NEW_TABLE_COLUMN of program CL_WD_TABLE_COLUMN============CP
Method: IF_WDR_VIEW_DELEGATE~WD_CREATE_UI_TREE of program /1BCWDY/6JQCRML58TRPAX42J5MQ==CP
Method: CREATE_UI_TREE of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DEV in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapdev_DEV_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapdev_DEV_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Edited by: arshad mohammed on Sep 24, 2009 2:19 AMHello experts,
i got the same error but we use sap basis 700 with sps 15. What to do here? -
Webdynpro Exception ICF service node
Hi folks,
I am new to webdynpro and using CRM 5.0 or NW 7.0 for creating application in webdynpro abap.
Here when i am trying to run the program , its giving following exception and now allowing me to run.
WebDynpro Exception: ICF service node for application /sap/public/myssocntl does not exist
So what could be the reason and solution for this problem.
Regards
JhonThe service node in question is the Single Sign On node that is used to generate a logon ticket from your SAPGUI logon. This is only used when testing a service from the SAPGUI directly. You can work around the problem by just cutting and pasting the URL into a browser instead of launching it from the SAPGUI. You will be prompted for user name and password on a logon screen then.
However this is a just a workaround. You should check SICF and see if this node is actually missing or if it has just been deactivated. If you want Single Sign On to work, then this node must be present and active. -
Error after creating submit button - WebDynpro Exception
Hi,
I have created a form from ABAP Webdynpro and in the adobe designer I have created a submit(both native and activex) button.
If the form is in display mode I am able to see the button , but if it is enabled I get the following dump.
WebDynpro Exception: The ADS call has failed.
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF_XSD of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Regards,
NarayaniRecently I cam upon a blog regarding this.
-
Hi,
I am running Interactive form through WebDynpro for ABAP in SE80 Tcode.
While running i'm facing below problem.
WebDynpro Exception: ADS: Request start time: Wed Apr 29 06:32:41 CDT 2009(200.101). �ꯂ塈��P
The following error text was processed in the system BAK : WebDynpro Exception: ADS: Request start time: Wed Apr 29 06:32:41 CDT 2009(200.101). �ꯂ塈��P
The error occurred on the application server cypcs_BAK_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Please let me know how to resolve this issue.
Thanks
Bhuvaneswarihi
You can take a look at OSS Note :981638 (Dynamic forms are not supported in Web Dynpro ABAP)
Depending on which Support Package you are on, there has been issues with dynamic forms not being interactive. (i.e when you set the 'x' for interactive, you get a short dump)
http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
by
Parthi -
WebDynpro Exception: ADS: Request start time
I am running Interactive form through WebDynpro for ABAP in SE80 Tcode . while running i am stuck here.
The following error text was processed in the system CRM : WebDynpro Exception: ADS: Request start time: Fri Jun 19 03:40:47 CDT 2009(200.101).
The error occurred on the application server 187799-ap_CRM_10 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CPwhile analyzed ABAP dump in st22 i got the following report
Information on where terminated
Termination occurred in the ABAP program "CX_WD_GENERAL=================CP" -
in "RAISE".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 5
of the (Include) program "CX_WD_GENERAL=================CM003".
Source Code Extract
Line
SourceCde
1
method RAISE .
2
3
DATA: error TYPE STRING.
4
error = MSG_STRING( msg = msg a = a b = b c = c i = i j = j k = k ).
>>>>>
RAISE EXCEPTION TYPE CX_WD_GENERAL EXPORTING msg = error.
6
7
endmethod.
ctive Calls/Events
No. Ty. Program Include Line
Name
19 METHOD CX_WD_GENERAL=================CP CX_WD_GENERAL=================CM003 5
CX_WD_GENERAL=>RAISE
18 METHOD CL_WD_ADOBE_SERVICES==========CP CL_WD_ADOBE_SERVICES==========CM008 193
CL_WD_ADOBE_SERVICES=>CREATE_PDF
17 METHOD /1WDA/LADOBE==================CP /1WDA/LADOBE==================CCIMP 1882
CL_INTERACTIVE_FORM_ZCI=>IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT
16 METHOD /1WDA/LADOBE==================CP /1WDA/LADOBE==================CCIMP 1024
CL_INTERACTIVE_FORM_BRANCH=>IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT
15 METHOD /1WDA/L8STANDARD==============CP /1WDA/L8STANDARD==============CCIMP 805
CL_FLOW_LAYOUT_ITEM=>IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT
14 METHOD /1WDA/L8STANDARD==============CP /1WDA/L8STANDARD==============CCIMP 676
CL_FLOW_LAYOUT=>IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT
13 METHOD /1WDA/L7STANDARD==============CP /1WDA/L7STANDARD==============CCIMP 541
CL_TRANSPARENT_CONTAINER=>IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT
12 METHOD CL_WDR_INTERNAL_WINDOW_ADAPTERCP CL_WDR_INTERNAL_WINDOW_ADAPTERCM007 118
CL_WDR_INTERNAL_WINDOW_ADAPTER=>CONV_VIEW_INTO_VE_ADAPTER_TREE
11 METHOD CL_WDR_INTERNAL_WINDOW_ADAPTERCP CL_WDR_INTERNAL_WINDOW_ADAPTERCM00Q 169
CL_WDR_INTERNAL_WINDOW_ADAPTER=>SET_CONTENT_BY_WINDOW
10 METHOD CL_WDR_CLIENT_SSR=============CP CL_WDR_CLIENT_SSR=============CM01C 33
CL_WDR_CLIENT_SSR=>RENDER_WINDOWS
9 METHOD CL_WDR_CLIENT_SSR=============CP CL_WDR_CLIENT_SSR=============CM007 4
CL_WDR_CLIENT_SSR=>IF_WDR_RESPONSE_RENDERER~RENDER_VIEWS
8 METHOD CL_WDR_CLIENT_SSR=============CP CL_WDR_CLIENT_SSR=============CM004 5
CL_WDR_CLIENT_SSR=>IF_WDR_RESPONSE_RENDERER~RENDER_USER_INTERFACE_UPDATES
7 METHOD CL_WDR_CLIENT_ABSTRACT_HTTP===CP CL_WDR_CLIENT_ABSTRACT_HTTP===CM00L 4
CL_WDR_CLIENT_ABSTRACT_HTTP=>IF_WDR_CLIENT~SEND_RESPONSE
6 METHOD CL_WDR_CLIENT_SSR=============CP CL_WDR_CLIENT_SSR=============CM003 63
CL_WDR_CLIENT_SSR=>IF_WDR_CLIENT~SEND_RESPONSE
5 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00I 132
CL_WDR_MAIN_TASK=>EXECUTE
4 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00J 69
CL_WDR_MAIN_TASK=>IF_HTTP_EXTENSION~HANDLE_REQUEST
3 METHOD CL_HTTP_SERVER================CP CL_HTTP_SERVER================CM00G 523
CL_HTTP_SERVER=>EXECUTE_REQUEST
2 FUNCTION SAPLHTTP_RUNTIME LHTTP_RUNTIMEU02 929
HTTP_DISPATCH_REQUEST
1 MODULE (PBO) SAPMHTTP SAPMHTTP 13
%_HTTP_START -
Getting Error : WebDynpro Exception: IDs with Namespace Must Have the
Hi Experts,
I am getting following error while running Webdynpro application, Please give me solution
The following error text was processed in the system E6I : WebDynpro Exception: IDs with Namespace Must Have the Format /<namespace>/<id>
The error occurred on the application server HCSAP2950-1_E6I_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CONSTRUCTOR of program CL_WDR_VIEW_ELEMENT===========CP
Method: CONSTRUCTOR of program CL_WD_TABLE_COLUMN============CP
Method: NEW_TABLE_COLUMN of program CL_WD_TABLE_COLUMN============CP
Method: IF_WDR_VIEW_DELEGATE~WD_CREATE_UI_TREE of program /1BCWDY/AK98KQL1OONYBLIT9ARC==CP
Method: CREATE_UI_TREE of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CPThanks,
satishHi,
SAP Notes 1242377, 1381873, 1389146
Threads:
WebDynpro Exception: IDs with Namespace Must Have the Format /<namespace>/<
regards, Lukas
Maybe you are looking for
-
I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lio
-
Embedding a font with a library's defaults.css file
When I add the font-face and font-family declarations to my defaults.css file in my lib, the compiler complains about not being able to find the font. I've included the font in the lib's assets, so what else do I need to do to make it see it?
-
Difference between compare nad compareTo method
difference between compare nad compareTo method
-
QUnit not showing any results - VisualStudio 2013
In Mircrosofs book: "Programming in HTML5 with JavaScript and CSS3" there is testing with QUnit. Have done exactly as the book describes with in an example with an webcalculator in excersise 3. But when I run the debugging with QUnit does not show an
-
Jspx and external javascript file (display empty page ?!?!)
I have created a JSPX file... Now I want to add a javascript control to verify that only numbers are pressed from keyboard.. This is a simple javascript function: function isNumberKey(evt) var charCode = (evt.which) ? evt.which : event.keyCode if (ch