Configure DHCP for Airport Extreme to see PPoE on a Nyxel DSL Modem?

I would like to configure DHCP server for an Airport Extreme to see PPoE on a Nyxel DSL Modem?

Please perform factory default reset on the AEBS as follows:
Pull the power plug from the back of the AEBS
Hold in the reset button and keep holding it in for an additional 8-10 seconds while you plug the power back in to the AEBS
Release the reset button and allow 25-30 seconds for the AEBS to restart to a slow, blinking amber light
Connect an Ethernet cable from the Zyxel modem/router to the WAN port (circle icon) on the AEBS
Connect another spare Ethernet cable from your Mac to one of the LAN <=> ports on the AEBS
Open AirPort Utility, select the AEBS, and click Continue to follow the guided setup as follows:
Page 1 - Assign a device name and device password for the AEBS
Page 2- Select "Create a wireless network"
Page 3- Assign a name for the wireless network and a password for the wireless
Page 4 - Select Bridge Mode if not already selected
Page 5 - Setting should be Configure iPv4 Using DHCP. Not other info is needed
Page 6 - Summary of settings and click Update
Close AirPort Utility
Test out the wireless by disconnecting the spare Ethernet cable and then clicking the AirPort icon at the top of your Macs screen to Turn AirPort On.
Then click Join Other Network and Show Networks to locate your wireless network and log on using the wireless password
You should be good to go

Similar Messages

Airport Extreme Cannot see Live Internet Connection from Cable Modem

Hi,
When I run a cable directly from my cable modem to my MacBook everything works fine. In fact, that is how I am connected to the Internet right now.
However, when I run the same cable into my Airport Extreme (AE) and then connect my MacBook to the AE (wired or wireless), the AE reports a problem connecting to the Internet. This is a new situation as everything has been working fine for months. I have changed nothing in this set-up for it to stop working.
I can only assume the at the AE is broken: the Internet connection is live, it was working fine for months and then stopped working. Is there anything I should try before I throw the AE in the garbage?
Thanks in advance.

Welcome to the discussions!
It appears as if you may not be aware that cable modems must be completely reset whenever the device that they are connected to changes. The reason for this is that the cable modem "remembers" the device that it has been connected to. In your case, it's "remembering" your computer and looking for it when you plug it in to the AirPort Extreme.
You need to make your modem "forget" your computer. Here's how:
o Push the reset button on the modem if there is one on your modem
o Power the modem down immediately after you push the reset button
o Pull the battery in the modem if it's easily accessible
o Leave the modem powered down at least 20-30 minutes (Some ISPs take longer)
Power down the rest of your network as well.
After the power down period, start the modem first and let it run 3-4 minutes by itself
Then start the Airport Extreme (you may need to "hard reset" the device again to start over on the configuration) and let it run a few moments
Then start your computers one at a time
Please post back on your progress. Remember, if you need to connect your computer directly to the modem again, you must reset the modem again because it will "remember" the AirPort Extreme if you have reset it correctly.

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

How do I configure my Airport Extreme to see the printer I have plugged into the USB port?

OK. The 6.0 version no longer has a printer configuration that I could find. You might try Printer Sharing in the Sharing preferences.
I would also check the printer's user manual for help with the setup, and that failing check the manufacturer's website and/or tech support.

IP Configuration issue with Airport Extreme

When configuring my Airport Extreme to use the AT&T DSL internet connection, an IP Configuration conflict is reported. My IP address is shown as in use by the Ethernet ID - DHCP Server. As a consequence, the Airport is not reporting an IP address to allow an internet connection. Here is the actual message:
192.168.1.64 in use by d8:a2:5e:7a:6e:35, DHCP Server 192.168.1.254
Hard re-starting the AIrport Extreme does not shake this configuration error.
I am now connecting successfully to the internet with an ethernet connection to the AT&T modem.
Thanks.

Check out this thread for some interesting items. The same instructions work for several users...but not another.
Re: AirPort Extreme Set Up Issue
AT&T wants this modem and router to work using DHCP - Bridge mode.
Not sure what you mean here.
This modem will not work correctly with an AirPort Extreme unless you put the modem in Bridge Mode or PPP is on the Router and then configure the AirPort Extreme to provide the PPPoE service.
I pulled out my old 2210 to test and confirm. Everything works just fine the way that AT&T recommends.
I think you will have nothing but headaches if you try to configure the modem for PPP is on the modem. Even if you can get the DHCP issues ironed out, a Double NAT error remains.

Recently bought airport Extreme and have connected the device to the modem. WIFI works. However when I connect the LAN port to a switch I do not see the LAN printer and my NAS. Which setting do I miss?

I have installed my Airport Extreme and have conencted it directly to a modem. WIFI works fine. However I do not see my LAN network (printer. NAS,..).
Analysis:
Scen#1: When I connect the LAN port of the Airport Extreme to a switch (as input) and connect the other LAN devices also to the switch, those LAN devices do not have access to the internet. Also connecting the iPAD with WIFI to the Airport Extreme I cannot find my LAN printer and other devices.
Scen#2: When I connect the LAN port of the Airport Extreme to a router X (as input) and connect the router X to the same switch, and the LAN devices to the switch, those LAN devices do have access to the internet. Also connecting the iPAD with WIFI to the router X I can find my LAN printer and other devices in the LAN network.
Question what has impacted the behaviour of the Airport Extreme, not to detect the devices in the LAN network. Why is the use of a switch directly behind the Airport Extreme not working (no internet access for the other devices and Airport Extreme is not the basis station for the LAN network)?

Your scenario #1 is a correct configuration and should work. It seems as though your Extreme is not acting as a router as I believe you intend.
Most likely, you need to reset your modem. Power it down and let it rest for a few moments. Some need longer than others. Then, I recommend you "hard reset" your Extreme (see below) and configure it again, after the modem has been reset. From then on do not change what is connected to your modem without powering it down first.
Once configured, confirm your Extreme's wireless network works as expected and that your iPad and every other wireless device can load web pages. Then, connect the printer directly to one of the Extreme's LAN ports and confirm that it works as well. After that it should work equally well with a switch between it and the Extreme, as should every other wired device connected to the switch. This assumes your switch is an unmanaged device requiring no specific configuration.
Scenario #2: Having a router connected downstream of another is not a normal configuration, so don't pursue that as a solution. It will only distract you from determining the problem. If you want to repurpose Router X as another device do so only after everything else is working to your satisfaction.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

No dhcp for airport with parallels

hi,
i have a macbook and installed parallels yesterday. since i rebooted the mac, my airport can not get an address from dhcp. it only has a self assigned ip address. when i first ran paralles i chose bridged network. but now it makes no difference which network option i choose in parallels. there is no ip from dhcp for airport anymore. the ethernet card still works fine. but i`m afraid that once i use it with parallels the same thing will happen to it. anyone got an idea what to do about that?
greetz,
mike

Hi, Mike / James Hetfield.
I don't mean to send you somewhere else, but this is a question you need to address with Parallels Support. I presume you've reviewed the Parallels User Guide concerning DHCP.
You might also want to search the AirPort & AirPort Express Discussions in case it has been addressed there, where AirPort-related questions are answered.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Are there updates available for Airport Extreme? If there are, will I be notified of an available update?

Are there updates available for Airport Extreme? If so, will I be notified or should I check from time to time for any updates?

Back up your data, check your applications for compatibility, and download Mavericks from the Mac App Store.
(108187)

Bonjour, lors de la configuration de mon airport extreme, "une erreur inattendue s'est produite" pourriez-vous me dire d'où peut provenir cette erreur

bonjour, lors de la configuration de mon airport extreme, "une erreur inattendue s'est produite" pourriez-vous me dire d'où peut provenir cette erreur

Bonjour,
Merci pour votre réponse, je n'avais pas trouvé le premier lien sur le site de NI qui me semble correspondre à mon problème.
>> Why do I receive Error -200245 with my X Series Card?
Nous n'utilisons pas d'horloge externe donc j'aurais tendance à croire que l'erreur vient de cette remarque : Signal generation: The reference clock signal should be active before calling starting any DAQmx task that will attempt to use the reference clock. Ensure that your reference clock source is generating the clock prior to DAQmx Start Task being called.
Si je comprends bien, il semblerait que ce soit du à une erreur de synchronisation de l'horloge PLL. C'est à dire que quand on lance l'acqui, il y a une horloge qui est créée pour synchroniser les cartes d'acqui, et pour cela, elle utilise l'horloge du fond de panier du châssis PXI. (on n'utilise pas d'horloge externe). Cette horloge référence est créée à chaque fois qu'on lance la génération et est libérée à chaque arrêt. Il semblerait qu'on lance la tache avant que l'horloge soit prête.
Il est possible que ce soit dû au fait que l'on va trop rapidement entre arrêter une séquence et lancer la suivante.
Je vais voir si il y a des astuces de prog pour interdire le lancement du DAQmx Start Task tant que le PLL n'est pas prêt, peut etre avez vous des infos à ce niveau? Validez vous mes hypothèses précédentes?
Merci beaucoup pour votre aide.

Where do I download drivers for airport extreme.....my iPad can not be set up by he current software

where do I download drivers for airport extreme.....my iPad can not be set up by he current software

I have an airport extreme with updated software(latest) and I setup an Ipad 3 on it with ios6(wirelessly). You can access the airport to update it with the utitlity app on an ios device, mac, or pc. I dont think it has anything to do with the airport software. Did you try rebooting the airport, then trying again?
Like james said, maybe more detail would help someone help you.

Why can't I install software for AirPort Extreme 802.11n while running Mountain Lion OSX?

Why can't I install software for AirPort Extreme 802.11n while running Mountain Lion OSX? The installation CD simply says that the software can't be installed while running this OSX.

Mountain Lion already has the most recent, updated version of AirPort Utility installed on your Mac. The version on your CD is out of date, so you can trash the CD.
Look in Macintosh HD > Applications > Utilities > AirPort Utility.

Extend Air Omni for Airport Extreme

I buyed from Apple Store Online the Extend Air Omni for Airport Extreme, but now my Airport Extreme don't have a antenna port.
It's possible ?

Only the M8799LL/A & M9397LL/A models of the AirPort Extreme Base Stations (AEBS) provide an external antenna port which you can plug the ExtendAIR Omni.

Is the maximum number of users for Airport Extreme per device, i.e. 2 AEBS = 100 users, one AEBS extending the other on the same wireless network?

Is the maximum number of users for Airport Extreme per device, i.e. 2 AEBS = 100 users, one AEBS extending the other on the same wireless network?

50 users per device, assuming that the "main" router is setup to deliver an adequate number of network IP addresses for all devices.
2 AEBS = 100 users, but that is really more of a theoretical max.
If you really need 100 connections, it would be much better to use 3 AEBS to spread things out.

Any idea on an update on 7.5.2 for airport extreme

Does anyone know if there will be an update to 7.5.2 for airport extreme?

The latest firmware for the Extreme is 7.5.2

Can I use an airport extreme to extend the range of my wireless modem

Can I use an Airport Extreme to extend the range of my wireless modem?
At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
Regards
Michael

Thanks Tesserax,
Your answer has confirmed my suspicions.
Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices.
I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem?

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem? Is the ethernet route less efficent that going throught the internet connection? If I don't need the westel modem; how do I make the dsl conection to the pone port in the wall? Thanks for help on this!

Ok, so are you saying that your Internet is or isn't working? Does it work if you plug your computer directly into your computer and bypass the router (make sure you power cycle the modem when you do this)? If it is working this way, then a new modem isn't going to solve a problem with your Internet not working. If it is going slow (try running a speedtest) then you need to call your phone company to have them take a look at why your Internet is slow. If it runs fine this way and then slows back down when you go back through your router there is something else going on. Try unplugging both the modem and the router, let the modem fully sign back in and connect to the Internet, after it gets signed in, plug your router in, and then after it boots up fully, try running the speedtest again...See if that helps any? Sometimes it's just an IP conflict that happens when the dynamic IP that is assigned by your Internet Service Provider changes and the change doesn't flow smoothly.

Configure DHCP for Airport Extreme to see PPoE on a Nyxel DSL Modem?

Similar Messages

Maybe you are looking for