Configure different sleep behaviour for AC Adapter/Battery?
Hello,
quick and easy (I hope) question: is there a way to configure a different behaviour for system sleep depending on current power source?
I'd like to prevent system sleeping while on AC adapter while leaving it enabled while on battery.
Thx
William
Hello Capt,
my fault: I forgot to mention I'm trying to get different behaviour on lid close event.
Thx for you answer by the way
William
Similar Messages
-
Different sleep times for different monitors?
I'm using a iBook G4 12" with an external monitor (spanned, not mirrored), and I was wondering if there's a way for me to set different sleep times for each of the LCD and the external monitor?
Thanks.
- JCNope. They all sleep or none sleep.
-
Configuring Process Integration Scenarios for Advanced Adapter Engine
Hello @all,
i've an asynchronous SOAP scenario and would like to configure an integrated configuration for Advanced Adapter Engine using a process integration scenario. In the documentation (Link below) it is described, that you can select local communication using AAE in the model configurator, but I couldn't find any hint. Any idea?
Documentation:
http://help.sap.com/saphelp_nw73/helpdata/en/48/ce987b18d3424be10000000a421937/content.htm
Thanks and kind regards
AndreasHi,
Use thse links:
Advanced Adapter Engine Configuration in PI 7.1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/700058f0-b1a1-2a10-39a8-ab2627b87cfa?QuickLink=index&overridelayout=true&47047071760975
Sreeni. -
After upgrading to Yosemite under sleep mode for few hrs battery is getting discharged fully.
System information
Mac book Pro 13 inch Retina Early 2013
Processor - 2.6 GHz Intel Core i5
Memory - 8 GB 1600 MHz DDR3
Graphics - Intel HD Graphics 4000 1024 MB
Storage capacity - 500 GB
OSX - 10.10
Ever since I have upgraded from Mavericks to Yosemite - battery consumption has increased.
and MOST CRUCIAL ISSUE IS - under sleep mode battery is getting drained like anything ...
for eg - I had 70% charge last night and it got completely drained when I got up in the morning.
there was no charge left in the battery after 6 hrs under sleep mode and it is happening for last 5 days every night...
I have already tried various things as troubleshooting....
Apple hardware test.
SMC
emptying caches etc....
observing activity monitor and finding any program taking more energy etc... (nothing is found)..
L3 Cache: 3 MB
Memory: 8 GUPDATE: Resolved!
Disabled all login items but problem persisted on normal boot. Resetting SMC and PRAM had no effect. After booting into Safe Boot, problem did not exist. Looked in console logs and saw this right as problem started to occur:
10/20/14 6:49:07.004 PM com.apple.xpc.launchd[1]: (com.gspy.MO3V2Daemon[93967]) Could not find and/or execute program specified by service: 2: No such file or directory: /Library/MO3V2/MO3V2Daemon.app/Contents/MacOS/MO3V2Daemon
This pertains to the Steelseries WoW MMO gaming mouse. Ran the uninstall.command from Applications for this mouse software and rebooted. Fixed.
Light on MagSafe connector is orange, battery shows as charging, fan is not running constantly. I can't begin to understand how this would effect the battery charging functions but, after uninstalling this, the problem was resolved. Hope this will help someone else. -
How do you set different sleep times for different days?
Energy Saver --> Schedule allows you to schedule start/wake/sleep/shut down, but it doesn't provide very fine grained control. Is there a way to set the computer to sleep or shut down at different times on different days, to wake only on particular days, etc.?
AFAIK, Energy Saver doesn't provide the granularity that you're seeking. Launch the Terminal app, copy & paste this command into the window that pops up, hit the return key, and peruse the underlying documentation for the power management setup process:
man pmset | cat -
Configuring Different MoH for IP phones
Hi all,
How could we configure different Moh music for different IP phones.
thanksHi,
the easiest way to do this is by using different device pools.
This should help you:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_1_3/ccmcfg/b02devpl.html
Please rate useful posts.. -
Configuring a Communication Channel for an AE other than the default IS
Configuring a Communication Channel for an Adapter Engine other than the default engine.
See: help.sap.com for Communication Channel http://help.sap.com/saphelp_nw04/helpdata/en/1b/d5ef3b1ad56d4fe10000000a114084/frameset.htm
It states under 'Adapter Configuration', that you can specify the Adapter Engine you want to use in the Adapter Engine dropdown box.
I have activated the XI components on my ERP system using transaction SICF, but what do I have to do to make the other adapter engines show up in the dropdown list when configuring an adapter?
Maybe some background would be helpful: This is for a scenario that will send a file from an external system to one of the ERP systems in our landscape. BUT, the system admins have decided to revoke our FTP accounts (because they have their reasons), so I need to create a File Adapter that will drop the file on the file system of that ERP system, due to visibility I want to use the integrated Adapter Engine that comes with the ERP system, but need to know how/what I'm missing in setting up this scenario.Hi Anesh,
>>>>but what do I have to do to make the other adapter engines show up in the dropdown list when configuring an adapter?
in order to use some other adapter engine you
have to install it first by dafault only one
(central) adapter engine is used and it is all
most clients need
if you'd like to use some other adapter engine
(decentralized for example) have a look at thid guide:
<b>Configuring a Local Adapter Engine to Work with a Central Instance</b>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a> -
How to use Wallets for FTP Adapter
Hi,
Can someone point to a document that shows how we can make use of wallets for FTP Adapter.
ThanksHi,
When you configure the Connection Factory for FTP Adapter in Admin Console, provide the following values for the attributes like the hostname, username, password, port and the path of remote location as where
you want to write the file in remote Server i.e., ftpAbsolutePathBegin. Please fill this
attribute with the path like /soa/ftp/file (example path). If you are writing to a remote FTP server you need to create a Connection factory for that as above.
Please try this and let me know...
Thanks,
N -
CCM 4.1(3)sr3a different ring tone for different line
Hi there,
I've got a dual line 7941 phone and would like to configure different ring tone for each of the lines. eg. I've got ext 100 and 101 on my phone. i would like the phone to ring differently when a call comes into 100 and 101 so i can know just by the ring tone which number has been called.
Can anybody help?
Cheers,
JesminderJesminder,
Unfortunately ring tones are configured at a phone level. In order to do this you need to go to the phone, push the settings button, select ring type. From there you will get a menu. Line 1 of the menu is the default ring. Line 2 and on corresponding to your line numbers in order. So if you want CallManager line 2 to be a different ring tone then you will select line 3 from the ring type menu, it should have the extension number next to it.
There also might be a way to set it via the web interface. You would want to post in the Ip Communications - Ip Phone services for end users forum.
Please rate any helpful posts
Thanks
Fred -
Need Dynamic attributes for XI adapter to use in Dynamic Configuration ..!!
Hi Friends,
We are planning send message to different receivers through XI adapter by using Dynamic Configuration.
Can anyone please tell me what are the dynamic attributes used for XI adapter.
In my scenario, I want to pass the Service Number and Path prefix of XI adpater dynamically by using sender ID from Idoc payload.
I know how to use the dynamic configuration UDF in message mapping. But I don't know the dynamic attributes which we can pass to Service Number and Path prefix of XI adpater.
Kindly suggest ..
Thanks
Deepthi.Hi Sourabh,
>> You need to set these attributes explicitly in the adapter configuration..
Can you please elaborate on this like how to implement this? Do we need to use any module configuration in the adapter?
We will use XI adapter only while sending the data directly from IE without using any feautures of AE (like adapters, modules etc). It is like directly sending data from ABAP stack without using J2EE stack. That is the reason we can't use any Modules in XI adpater and it is in disabled by default.
When I checked in SXMB_MONI.. as you said details are found in
- <SAP:Attribute>
<SAP:Name>host</SAP:Name>
<SAP:Value>10.190.25.16</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>httpDestination</SAP:Name>
<SAP:Value />
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>path</SAP:Name>
<SAP:Value>/rcvA/receiver</SAP:Value>
</SAP:Attribute>
- <SAP:Attribute>
<SAP:Name>port</SAP:Name>
<SAP:Value>8210</SAP:Value>
</SAP:Attribute>
XI adapter uses mainly three parameters Host, Port and Path.
I want to pass any two of these values dynamically to achieve my solution. Can you please suggest your solution how we can implement it.
-Deepthi. -
How to configure different listener for each database in 11gR2 RAC
Hi Friends,
Current Prod Setup :
11gR2 (11.2..0.2) RAC on RHEL 5.5 with 3 SCAN Listeners on default 1521 port.
Having 4 databases which are using SCAN-IP and listening on default port only.
As per policy, we have to create separate listeners (on different port) for each database.
like,
DB1 - 1522
DB2 - 1523
DB3 - 1524
DB4 - 1525
Even If I configure 4 listeners using NETCA, how my failover & load balancing will happen using SCAN & Newly Created Listeners ???
Thanks in advance..
Regards,
ManishHi,
I tried on 11gR2 TEST RAC Server to have different listener with different port (1529) for SCAN & Node Listener & tested failover, load-balancing which was successful.
[oracle@ravish5 admin]$ cat listener.ora
LISTENER_A=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_A=ON # line added by Agent
[oracle@ravish5 admin]$ ps -ef | grep lsnr
oracle 1985 1 0 00:46 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER -inherit
oracle 1988 1 0 00:46 ? 00:00:00 /11g_database/11.2.0.2/product/home_1/bin/tnslsnr LISTENER_A -inherit
oracle 2928 1 0 01:00 ? 00:00:00 /11g_crs/11.2.0.2/product/home/bin/tnslsnr LISTENER_SCAN1 -inherit
[oracle@ravish5 admin]$ lsnrctl status LISTENER_A
LSNRCTL for Linux: Version 11.2.0.2.0 - Production on 02-MAY-2012 03:19:35
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_A)))
STATUS of the LISTENER
Alias LISTENER_A
Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production
Start Date 02-MAY-2012 00:46:42
Uptime 0 days 2 hr. 32 min. 54 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /11g_database/11.2.0.2/product/home_1/network/admin/listener.ora
Listener Log File /11g_database/11.2.0.2/diag/tnslsnr/ravish5/listener_a/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER_A)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.5)(PORT=1529)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.3.16)(PORT=1529)))
Services Summary...
Service "TEST" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "TESTXDB" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
Service "srvc_test.clover.com" has 1 instance(s).
Instance "TEST2", status READY, has 1 handler(s) for this service...
The command completed successfully
SQL> show parameter listen
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=192.
168.3.16)(PORT=1529))))
remote_listener string ravish-scan:1529
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, OLAP,
Data Mining and Real Application Testing options
[oracle@ravish5 admin]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521,1529
[oracle@ravish5 admin]$ srvctl config scan
SCAN name: ravish-scan, Network: 1/192.168.3.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /ravish-scan.clover.com/192.168.3.22
[oracle@ravish5 admin]$ srvctl config listener
Name: LISTENER
Network: 1, Owner: oracle
Home: <CRS home>
End points: TCP:1521
Name: LISTENER_A
Network: 1, Owner: oracle
Home: /11g_database/11.2.0.2/product/home_1
End points: TCP:1529
[oracle@ravish5 admin]$ srvctl config service -d TEST -s srvc_test.clover.com
Service name: srvc_test.clover.com
Service is enabled
Server pool: TEST_srvc_test.clover.com
Cardinality: 2
Disconnect: false
Service role: PRIMARY
Management policy: AUTOMATIC
DTP transaction: false
AQ HA notifications: true
Failover type: SELECT
Failover method: BASIC
TAF failover retries: 0
TAF failover delay: 0
Connection Load Balancing Goal: LONG
Runtime Load Balancing Goal: NONE
TAF policy specification: BASIC
Edition:
Preferred instances: TEST1,TEST2
Available instances:
TEST_NEW =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ravish-scan.clover.com)(PORT = 1529))
(LOAD_BALANCE = yes)
(FAILOVER = ON)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = srvc_test.clover.com)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
Actually different ports for different databases are required to have separation of duties. Once Firewall enabled betwen Client & DB Server only privileged users would have access to particular database.
Regards,
Manish -
URL For J2SE Adapter Engine Configuration
Hi All,
I have to go for adapter configuration for that i need to go to Adapter Engine Configuration Screen. So can any one please tell me the URL for going to the particular screen.
Regards,
RahulHi rahul,
I think URL for J2SE adapter engine is http://hostname:portname. Just check following link :
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/6f/246b3de666930fe10000000a114084/frameset.htm">J2SE ADAPTER ENGINE</a>
Regards,
Keith. -
HTTPS configuration for SOAP adapter
Hi,
We have a requirement where we need to send the request to the target URL with https protocol.
We have raised a request to configure the XI server for HTTPS.
HTTPS has been configured on both ABAP stack and J2EE stack.
But we could not find the HTTPS option in the drop down list of transport protocol in receiver Soap adapter.
For this do we need to do any setting changes on the XI server after the configuration?
Thanks,
Jyothsna .Hi,
You need to setup SSL layer for HTTPS endpoint.
Possible HTTP security levels are (in ascending order):
HTTP without SSL
HTTP with SSL (= HTTPS), but without client authentication
HTTP with SSL (= HTTPS) and with client authentication
Please go through below link for referance (above information is from below link)
Step by step guide for SSL security
step by step guide to implement SSL
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ff/7932e4e9c51c4fa596c69e21151c7d/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/13/4a3ad42ae78e4ca256861e078b4160/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3a/7cddde33ff05cae10000000a128c20/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0a/0a2e0fef6211d3a6510000e835363f/content.htm
General guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a09f3d8e-d478-2910-9eb8-caa6516dd7d9
Message level security
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Regarding message level you can encrypt the message using certificates.
For both of this basis team has to deploy the releavant certificates in XI ABAP Stack or Java stack.
Generally if the scenarios are intra company we dont use any transport level or message level security since the network is already secured.
Check the following links.. you will get the information all about the securities...
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c2953fc405330ee10000000a114084/content.htm
Also read thru this link for message level security - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
Also find soeminformation in these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/882a40ce93185de10000000a1550b0/frameset.htm
/people/aparna.chaganti2/blog/2007/01/23/how-xml-encryption-can-be-done-using-web-services-security-in-sap-netweaver-xi
Thanks
Swarup -
Configuration for JMS Adapter Sensor action and JMS Queue sensor action..!!
Hi,
Id like my BPEL process to send an XML message to JMS on Websphere,I was able to do this through a JMS adapter.But I would more like to add sensors into my process which would really do the same thing - send an XML message to JMS Q.
Now I understand that there are two ways to do this,JMS Queue and JMS Adapter - thorugh bpel sensor action.
I am able to use JMS Queue and it works fine , but adds its own xml tags to the message,Is there any way I could send only my xml payload as a message to the queue??
Also could any1 tell me what is the configuration for JMS Adapter sensor action?
Any suggestions how do I go about it??Hey Anirudh,
Thanx for the response :-)
All these hold good when I have an AQ adaptor right,But the thing is I want to send a message to a 'JMS' queue with out actually using an adapter configuration wizard and everythng..So I resolved to JMS queue Sensor action..Heres the xml snippet from the sensorAction.xml files which is generated..
<actions targetNamespace="http://xmlns.oracle.com/Test_JMS_Logging" xmlns="http://xmlns.oracle.com/bpel/sensor" xmlns:tns="http://xmlns.oracle.com/Test_JMS_Logging" xmlns:pc="http://xmlns.oracle.com/bpel/sensor">
<action name="JMS_LogEntry" publishName="" publishType="JMSQueue" enabled="true" filter="" publishTarget="jms/L_Queue">
<property name="JMSConnectionFactory">jms/L_QueueCF</property>
<sensorName>ActivitySensor_JMS</sensorName>
</action>
</actions>
This works grt and adds messages to the queue..But adds its own header info according to the sensor.xsd loacted at the Oracle_home\bpel\system\xmllib\ folder.
Right now the XML message added to the Queue is:-
<actionData xmlns="http://xmlns.oracle.com/bpel/sensor">
<header>
<sensor sensorName="ActivitySensor_JMS" classname="oracle.tip.pc.services.reports.dca.agents.BpelActivitySensorAgent" kind="activity" target="AddLEntr
y" xmlns:pc="http://xmlns.oracle.com/bpel/sensor" xmlns:ns2="http://www.ulrhome.com/2008/10/L_Entry" xmlns:tns="http://xmlns.oracle.com/Test_JMS">
<activityConfig evalTime="completion">
<variable outputDataType="string" outputNamespace="http://www.w3.org/2001/XMLSchema" target="$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName"/>
</activityConfig>
</sensor>
<instanceId>950016</instanceId>
<processName>Test_JMS</processName>
<processRevision>v2009_04_15__40833</processRevision>
<domain>default</domain>
<timestamp>2009-04-15T11:21:23.596-04:00</timestamp>
<midTierInstance>app01.ulrhome.com:9700</midTierInstance>
</header>
<payload>
<activityData>
<activityType>scope</activityType>
<evalPoint>completion</evalPoint>
<durationInSeconds>0.011</durationInSeconds>
<duration>PT0.011S</duration>
</activityData>
<variableData>
<dataType>12</dataType>
<data>
<ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
</data>
<queryName/>
<target>$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName</target>
<updaterName>AddL_Entry</updaterName>
<updaterType>scope</updaterType>
</variableData>
</payload>
</actionData>
My requirement is that I need to add a sensor to the BPEL process which posts 'Only my payload message to the JMS queue'..
What I would want the message in the Queue to be is : -
<data>
<ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
</data>
Also while creating a Sensor action I get another option as JMS Adaptor,I am not sure of what value to type in this wizard..Heres what I keyed in..M sure this is not right..Cos it dosnt work :-)
<action name="SensorAction_JMS" publishName="" publishType="JMSAdapter" enabled="true" filter="" publishTarget="jms/LoggingQueue">
<property name="JMSConnectionName">Log</property>
</action>
</actions>
Could any 1 tel me what values are the right values..And does JMS Adapter mean that I have to create a JMS Apator in the project and give that connection name as a Value..
I am not finding sufficiant Documentation for 'JMS Adapter' so M clueless and right now any help will be appriciated :-)
Regards,
Akshatha. -
Configuration Steps for Decentralized Adapter Engine
Hi all,
What all configuration steps are required to make Adapter Engine as
Decentralized AE.
I have made required changes in SLD DataSupplier in Visual Administrator.
what more configurations have to be done? On SAP XI Server and Decentralized
Adapter Engine.
With regards
PrasadPrasad,
After configuring SLD data supplier in Visual Admin, you need to the following
1) Configure the gateway service for the central integration server on adapter engine host.
2) Perform Initial adapter engine cache refresh
3) Trigger data transfer to SLD
4) Check the connection parameters in exchangeProfile
5) Create HTTP destination pmistore in java environment
you have to go through all these tests for decentralized adapter engine. If you have XI configuration guide, it has all these steps in detail for you to configure
--Archana
Maybe you are looking for
-
Can FlexNet Service Be Re-installed?
Is there a way of installing the FlexNet service on its own? We have uninstalled Acrobat Pro 9 which has also removed FlexNet, so now users of PhotoShop CS3 and InDesign CS3 are getting license errors. Other than having to re-install Acrobat Pro 9, i
-
PE White Balance for separate color tables
I'm trying to use 24-patch color checker. I already have image collected. But they are not exactly 6500K and 2850K. Can I use the images to create separate color tables ?
-
I just upgraded to Yosemite, and now I see that my bookmarks bar in Safari has all of the content from my work computer. Same with my reading list. Eeek! I want to keep these separate. How do I fix this?
-
Sql loaded installation in UNIX for oracle 10.2
We installed Oracle client on our unix server by downloading client from the recommended ftp server. However, we are not seeing sqlldr in the bin directory. Is there a seperate install for this? we can see all other utilities such as sqlplus. How can
-
When I "expand threads" on livejournal pages, Firefox freezes and I'm repeatedly sent the error message: chrome://adblockplus/content/utils.js:90 . It doesn't matter if I chose "stop script" or "keep running script", it still keeps freezing. I've goo