Configure E-Mail Notification with several smtp servers

Hi all,
We want to configure "reset password" and we must configure E-Mail notification.As http://help.sap.com/saphelp_nw2004s/helpdata/en/44/bf8f2069665991e10000000a422035/content.htm shown,we can "Separate multiple SMTP server entries with a semicolon (;)" So we can add several smtp servers,right?
But I add some,only the company SMTP servers can be used,others cannot receive notification emails. What else should i configure?Can portal send emails to multiple domains ?
Best regards,
delma

How can I configure my SMTP server for allow the SAP system to send mail through it.?
I don´t know - I don´t know which mail server you use (software).
Markus

Similar Messages

How to Configure a mail server with OIM

Experts ,
Any idea/links/Docs on how to configure a mail server with OIM and to send mail notification to someone .
Pardon me, if my questions seems to be incomplete .
Thanks
Suren

.Create an IT Resource of Type Mail Server. Give Name as "Email Server.Now populate the values for all the parameter for example Server,username,password and authentication type.
.Go to System Configuration and in Email Server property value give the name of IT resource you created in step1 so the name will be "Email Server".
http://forums.oracle.com/forums/messageview.jspa?messageID=3867506&stqc=true

I have an iPhone 4s and a hotmail account, and despite having configured push mail notifications to be received automatically and immediately, I fail, I have to do something extra? thanks

I have an iPhone 4s and a hotmail account, and despite having configured push mail notifications to be received automatically and immediately, I fail, I have to do something extra? thanks

IOS supported push mail account http://support.apple.com/kb/HT2625#

A tip on how to get mail to work with O2 SMTP servers.

I found I had a problem in Mountain Lion where Mail could not log into the O2 SMTP servers even though I was using the exact same settings that were on my iPhone, iPad and MBP running Lion?
Well I finally found a solution.
In Mail open preferences and click on Accounts and select the account in the lefthand pane.
Click on the Outgoing Mail Server (SMTP) and in the drop down menu select Edit SMTP Servers to get:
Normally the radio button against Use Default Ports would be checked, instead check Use Custom Port and insert the number 25 and click OK.
Now back at the Accounts window click on Advanced at the top to get:
Make sure you have Port 110, on mine changing the SMPT to 25 also altered this to 25 so worth checking. When you have finished close the preferences and click on save, quite Mail then restart hopefully all should work now.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Mail.app -- confused between SMTP servers?

BACKGROUND: I have used Terminal for over 10 years to access a Unix server where I get my mail using Pine / Alpine --simple text email and trouble-free wherever I am. Recently my university has been shutting down the Unix server and moving accounts to a so-called Exchange (I know, bad decision!). I'm told that soon there will be no Terminal access, no Pine. Long story short: I started adopting Mail.app. Now, it happens that when I'm home my home smtp server is one, and when I'm at the university it's another (and I assume it's like that wherever I go with my laptop--that's a nightmare; I'll miss Terminal/Pine). I also have a @me.com account running together with my university email in Mail.app. And @me has its own smtp server.
PROBLEM: Very often, when I get home, the home smtp server 'thinks' I'm trying to send university email with the 'me' smtp instead of the internet provider smtp. Also, often the internet provider's smtp rejects university emails because it appears to be from me.com. I keep getting a msg to select smtp servers for every email I send, no matter which account. Mail.app always pairs the wrong email address / smtp server. After about a dozen "select this server" attempts, the msg leaves the Outbox!
QUESTIONS: Is there a way for the smtp server to be selected automatically? I assume it should be like that (I did configure the list of smtp servers and email addresses correctly; so the confusion appers to be in a configuration file, I don't know. Also the connection doctor and the list of smtp servers appear to be correct). Is this a bug in Mail.app?
A more general question: Does this all (see Background, above) mean that I won't have access to IMAP accounts if, say, I'm at a cafe--unless I know which smtp server that cafe uses?? Does anybody know if new versions of Alpine/ReAlpine work in Lion? I haven't upgraded just because of that!

It's in Tiger, sort of, as a drop-down menu in the new message composition window -- requires a one-time setup then it's there for all time.
Click on "compose new message" button in Mail toolbar or type an "apple-n". In message header there is a small rectangular box with 3 horz lines & downward pointing triangle. Click on that box. Select "Customize..." then check the "Account" checkbox, and in the future you will have an "Account" drop-down menu in the header area of your new message composition windows that will select what account to apparently send from (which selects what smtp server to use). It uses whatever email address belongs to that account for the "From:" address, though -- probably not exactly what you want.

How to configure Sendmail mail relay with authentication

Hi,
How to configure send mail relay. Client gave us smtp host,port, username and password. We have a couple of server. If we configure the relay in any one of the server other servers able send mails using relay server. Please help me on this?

.Create an IT Resource of Type Mail Server. Give Name as "Email Server.Now populate the values for all the parameter for example Server,username,password and authentication type.
.Go to System Configuration and in Email Server property value give the name of IT resource you created in step1 so the name will be "Email Server".
http://forums.oracle.com/forums/messageview.jspa?messageID=3867506&stqc=true

Help to Configure WF mailer notification

Hi gurus,
We configure the approval through mail with help of oracle document ID, after we configure system not generate the mail notification to user.Please help us to configure in my instance.
Regards,
Udhayan

Hi, the notification mailer and the components are managed via oc4j, you can check if the processes of the containers are up? (Component Container or Management Container), if not, start them using:
${ORACLE_HOME}/jdk/bin/java
-Djava.security.properties=${ORACLE_HOME}/oc4j/j2ee/home/config/jazn.security.props -jar ${ORACLE_HOME}/oc4j/j2ee/home/oc4j.jar -userThreads -config ${ORACLE_HOME}/oc4j/j2ee/OC4J_Workflow_Component_Container/config/server.xml
The engine of the workflow mailer can be check using the instructions in this URL: http://www.appsdba.info/docs/oracle_apps/R12/WF_Mailer.pdf
Please let me know if this resolves the issue, regards!

E-Mail Notification with https link to new item

Hi all,
we have a vibe 3.4 system and want to use the e-mail notification features so all in our team will get those status messages.
Generally this feature works and we get mail. The problem is that the links in the mail to the new item starts with http://... not https:/xxx.
How can this be configured so the links use secure https to the items??
kind regards,
Martin

Hi Martin,
Does your system already use secure HTTP urls(HTTPS) when anyone accesses the site? If yes, then for emails you just need to configure at one place. Follow the steps below (but make sure to take proper backups before you do. I am just extracting the steps mentioned in Vibe Documentation, which can be read online as well here https://www.novell.com/documentation.../bju0gr2.html#. If all the configurations are made already, then just scroll down to the section: Defaulting to Secure HTTP URLs in E-Mail Notifications)
Defaulting to Secure HTTP URLs in E-Mail Notifications
When an e-mail notification is sent from Vibe, Vibe includes a URL to the location on the Vibe site where the notification was sent. By default, the URLs in e-mail notifications are formed with http rather than https. You can reconfigure Vibe to default to https for Vibe site URLs.
Log in to the Vibe server with sufficient rights to edit the ssf-ext.properties file (root on Linux, Administrator on Windows).
Change to the following directory:
Linux:
/opt/novell/teaming/apache-tomcat/
webapps/ssf/WEB-INF/classes/config
Windows:
c:\Program Files\Novell\Teaming\apache-tomcat\
webapps\ssf\WEB-INF\classes/config
Open the ssf.properties file in a text editor.
Locate and copy the following line:
ssf.secure.links.in.email=false
Close the ssf.properties file without saving.
Make a backup copy of the ssf-ext.properties file, located in the same directory with the ssf.properties file.
Open the ssf-ext.properties file in a text editor.
Paste the line that you copied in Step 4 to the bottom of the file:
ssf.secure.links.in.email=false
Change false to true so that the line now looks like this:
ssf.secure.links.in.email=true
Save the ssf-ext.properties file, then exit the text editor
Restart Vibe to put the change into effect.
All system-generated e-mail notifications now default to secure HTTP URLs. However, all user-generated e-mails from the Vibe system follow the current users context. For example, if a user is logged in as HTTP and chooses to share an entry with another user, the link in the e-mail notification uses HTTP.
Regards,
Saad.

Why doesn't mail work with Att Yahoo servers?

Ever since Bellsouth went to using Yahoo to handle their email it hasn't worked regularly. Now that my system is so old they are incapable of helping. They do not have any tech support for Apple products nor do they seem to care. The conversation all ways ends up that they say something is wrong with the mail program or the computer. Since i had it checked out I know that is BS.
I know there are a number of people using older Mac Mail programs with one of the At&T companies that someone must have found a solution, or not? There are pages of Mac owners complaining on the ATT site but no solutions.
Looking for someone that has succeeded in dealing with ATT and what is it?
It may be that the solution is using a different email program than Mac Mail or forwarding from a different email supplier. Any suggestions?

     Thanks to all whom replyed to my query. I have spent more time with ATT and I hired a local computer guy to help. Using you alls info and my high priced friend the email works most of the day. I have found a couple things... some say the servers are IMAP and some say they are POP. What I have had to do is have both set ups available to me to use to get and send mail. Right now the POP is working best.
     ATT will tell you either, depending on the fool you talk to. The last guy said only POP will work. The guy befoe said they were IMAP. They also like to send people to their 3rd party tech people. Unfortunately they don't know anything about macs and they won't tell you that until after you pay them. What the final say from ATT is that they only guarantee that you can get you mail via web-mail and will do little to nothing to help you othet than what is correographed on their computer screen. If that doesn't help thay basicly say tuff luck. My suggestion to all is find someone else other than ATT OR IT'S SUBS.
     Currently 2 of my three bellsouth.net emails address work a couple days at a time. One only works for 15 minutes. To get it to work you can open the Connection Doctor and run it usually once and the email will begin working again. You can access it (OS 10.8.4) by clicking on the little "triangle with exclaimation point" that comes up next to you email box name. I leave open all day to make it easier to access. It also makes the G5 work at the same time. Nor because they are connected but because the problem is with Yahoo-ATT.
     Current POP settings are:
                                    inbound.att.net     port 110 with SSL and password authentication
                                    outbound.att.net   port 465 with SSL and password authentication on two of the emails
     On one of the emails I have a GoDaddy web account that uses:
                                       pop.secureserver.net default port selection with SSL and password authentication
for the out going mail server which works for the bellsouth email. Seems like it shouldn't but it does.
I also keep the IMAP settings as noted by "goodmanrc" as sometimes it works.
                   Incoming Mail Server
                      Host Name       pop.att.yahoo.com
                      Use SSL          ON
                      Authentication Password
                      Port                995
                   Outgoing Mail Server
                      Host Name      smtp.att.yahoo.com
                      Use SSL         OFF
                      Authentication Password
                      Port               25
The settings as noted by Andrew99 use to work before I got Uverse. Now they no longer work. At least not this week.
Thanks again to all.

How to configure one TREX host with multiple index servers ?

Hi All,
Does anyone know how to configure TREX on the one host,
with multiple index servers ?
Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
our KM content for portal users.
I am using TREX 7 and have not been able to do this,
despite reading the Single and Distributed install
documentation.
Any help would be appreciated.
Regards,
Andres

Hi Andres,
To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
Proceed like this:
1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
2. In TREXdeamon.ini go to
[daemon]
references sections below
programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
Go to the last two columns and move the indexes (move master here/secondary mouse click)
If you don't distribute the indexes the new index server process will be regarded when an new index is created.
Hope this helps!
cheers
Bettina

Configuring Receiver mail adapter with dynamic email addresses

Hi,
I'm a newbie to XI and I have problems in configuring the Receiver mail adapter with the "Use Mail package" option selected. I am trying pickup a file (using file adapter on Sender side, picks up a simple XML file) and after mapping in XI, send the message as an email message to dynamic email addresses.
Everything works fine if I did not select the "Use Mail Package". But when I choose that option it errors out. I followed this blog posted on SDN -
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
The following XML message is my source
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/Somenamespace">
 <ns0:Message1>
 <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
 <Student>
 <studentid>1</studentid>
 <lastname>Studentlastname</lastname>
 <firstname>Studentfirstname</firstname>
 </Student>
 <Mail>
 <From>[email protected]</From>
 <To>[email protected]</To>
 <Subject>Test mail adapter</Subject>
 </Mail>
 </ns1:studentlisttest>
 </ns0:Message1>
</ns0:Messages>
What I want to accomplish is, I have a simple message mapping where the Studentdetails are mapped to, lets say Customer details. For convenience lets keep it simple, StudentId --> Customerid, (student)Firstname --> (customer)Firstname, (Student)Lastname --> (customer)Lastname
I would like to get the Customer details as an XML attachment or in the body of an email with from, to and subject corresponding to that specified in the <Mail> node.
I followed the instructions posted on the blog and it works fine if I don't map the studentdetails to customerdetails. I did multimapping, with one source message (the xml file I posted above) and two target messages (customerdetails and Mail, which is the external definition posted on the blog). I beleive I'm missing something here. Could somebody please guide me through this?
Thanks
Karthik

hi,
I still have not found the solution for this problem. Michal, your blog works fine when my source message has got only the mail details. As per your advice, I tried modified the structure of the xsd file as follows
<xs:schema targetNamespace="http://sap.com/xi/XI/Mail/30"
xmlns:xi="http://sap.com/xi/XI/Mail/30"
xmlns:xs="http://www.w3.org/2001/XMLSchema">

<xs:element name="Mail">
 <xs:annotation>
 <xs:documentation>Mail package for XI - Mail Adapter</xs:documentation>
 </xs:annotation>
 <xs:complexType>
 <xs:sequence>
 <xs:element name="Subject" type="xs:string" minOccurs="0"/>
 <xs:element name="From" type="xs:string" minOccurs="0"/>
 <xs:element name="To" type="xs:string" minOccurs="0"/>
 <xs:element name="Reply_To" type="xs:string" minOccurs="0"/>
 <xs:element name="Content_Type" type="xs:string" minOccurs="0"/>
 <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
 <xs:element name="Message_ID" type="xs:string" minOccurs="0"/>
 <xs:element name="X_Mailer" type="xs:string" minOccurs="0"/>
 <xs:element name="Content" minOccurs="0">
 <xs:annotation>
 <xs:documentation>any type</xs:documentation>
 </xs:annotation>
 </xs:element>
 </xs:sequence>
 <xs:attribute name="encoding" type="xs:string"/>
 </xs:complexType>
</xs:element>
<xs:element name="MailReceipt">
 <xs:annotation>
 <xs:documentation>Mail Receipt for XI - Mail Adaper</xs:documentation>
 </xs:annotation>
 <xs:complexType>
 <xs:sequence>
 <xs:element name="Server" type="xs:string"/>
 <xs:element name="Format" type="xs:string"/>
 <xs:element name="UseMailPackage" type="xs:boolean"/>
 <xs:element name="Encoding" type="xs:string"/>
 <xs:element name="Subject" type="xs:string" minOccurs="0"/>
 <xs:element name="From" type="xs:dateTime" minOccurs="0"/>
 <xs:element name="To" type="xs:string" minOccurs="0"/>
 <xs:element name="Date" type="xs:dateTime" minOccurs="0"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
<xs:element name="CustomerlistExternal">
 <xs:annotation>
 <xs:documentation>Customer List</xs:documentation>
 </xs:annotation>
 <xs:complexType>
 <xs:sequence>
 <xs:element name="Customername" type="xs:string"/>
 <xs:element name="Customerid" type="xs:string"/>
 </xs:sequence>
 </xs:complexType>
</xs:element>
</xs:schema>
My source message will be something like
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <ns1:studentlisttest xmlns:ns1="urn:karthiksender_to_karthikreceiver">
 <Student>
 <studentid>1</studentid>
 <lastname>abclname</lastname>
 <firstname>abcfname</firstname>
 </Student>
 <Mail>
 <From>[email protected]</From>
 <To>[email protected]</To>
 <Subject>Testing Mail adapter</Subject>
 </Mail>
 </ns1:studentlisttest>
 </ns0:Message1>
</ns0:Messages>
I have mapped the <student></student> information to customerlist, with customerid --> studentid and customername --> firstname or lastname (for symplicity). This was a multimapping with one source and two target messages. My test mapping output is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <ns2:Mail xmlns:ns2="http://sap.com/xi/XI/Mail/30">
 <Subject>Testing Mail adapter</Subject>
 <From>[email protected]</From>
 <To>[email protected]</To>
 </ns2:Mail>
 </ns0:Message1>
 <ns0:Message2>
 <ns2:CustomerlistExternal xmlns:ns2="http://sap.com/xi/XI/Mail/30">
 <Customername>abclname</Customername>
 <Customerid>1</Customerid>
 </ns2:CustomerlistExternal>
 </ns0:Message2>
</ns0:Messages>
So how would I get this part of the <CustomerlistExternal></CustomerlistExternal> part of the message as an attachment to the mail address specified in the <ns2:Mail></ns2:Mail> tags.
I'm definitely not understanding it right and am missing something. Could you give me step by step instructions to acheive this. I apologize for the trouble..this would be of great help to me.
Thanks
Karthik

HTML tags in text-only e-mail notification (with HTML attachment)

Greetings,
Our "Purchase Order Review" e-mail notifications (as generated by the WF-Mailer) have HTML tags in the message body (which is "plain-text" text-only), with an HTML attachment. (The attachment looks good, and is what we are expecting.) All our e-mail notifications are text-only (which is how we want them), and this is the only kind of notification that is generating HTML tags in the 'text-only' message body.
We'd like to keep the HTML attachment as it is, but we want to have the e-mail message body be text (without any HTML tags). The other option that would be acceptable is to NOT have any message content at all, and only the HTML attachment.
Can either of these options be done, and how do we go about doing them?? Thanks!! -- Tom
Tom Buck
[email protected]
PS: Here is a partial sample of the "text-only" message content...
<HTML><HEAD></HEAD>
<BODY BGCOLOR="#FFFFFF">Oracle Workflow Notification (FYI)
 
<hr>
<table width=100% border=0 cellpadding=2 cellspacing=1 cols=3 rows=2>

<tr>

<td width=45% valign=top>


BUTLER MANUFACTURING
 
 BUTLER MANUFACTURING COMPANY
 BUTLER MANUFACTURING HEADQUARTERS
 1540 GENESSEE ST.
 KANSAS CITY
, MO
64102
 US
 
</td>
<td width=25% valign=top>

etc..., for another couple hundred lines. -- Tom

in the notifications properties you will see two tabs, in one you can enter your message in text and in another you can enter in html. not sure if you had tried these.
hth
satish paul
Greetings,
Our "Purchase Order Review" e-mail notifications (as generated by the WF-Mailer) have HTML tags in the message body (which is "plain-text" text-only), with an HTML attachment. (The attachment looks good, and is what we are expecting.) All our e-mail notifications are text-only (which is how we want them), and this is the only kind of notification that is generating HTML tags in the 'text-only' message body.
We'd like to keep the HTML attachment as it is, but we want to have the e-mail message body be text (without any HTML tags). The other option that would be acceptable is to NOT have any message content at all, and only the HTML attachment.
Can either of these options be done, and how do we go about doing them?? Thanks!! -- Tom
Tom Buck
[email protected]
PS: Here is a partial sample of the "text-only" message content...
<HTML><HEAD></HEAD>
<BODY BGCOLOR="#FFFFFF">Oracle Workflow Notification (FYI)
 
<hr>
<table width=100% border=0 cellpadding=2 cellspacing=1 cols=3 rows=2>

<tr>

<td width=45% valign=top>


BUTLER MANUFACTURING
 
 BUTLER MANUFACTURING COMPANY
 BUTLER MANUFACTURING HEADQUARTERS
 1540 GENESSEE ST.
 KANSAS CITY
, MO
64102
 US
 
</td>
<td width=25% valign=top>

etc..., for another couple hundred lines. -- Tom

How to configure lion mail service with lion server settings

I've sucessfully setup outgoing mail but I keep getting "The server returned the error: The server "incoming.domain" cannot be contaced on port 110". What configurations for Lion Server and Mail incoming mail server do I need to receive mail?

Please also see:
How To Configure Workflow Notification Mailer To Send Email Notification For Only One Workflow Item type/Process? (Doc ID 786647.1)
Configuring A Notification Mailer Based On A Specific Item Type. (Doc ID 415723.1)
After Upgrade R12.1.3 All Alerts Are Completing With Signal 11 (Doc ID 1438919.1)
Oracle Alert Response Processing Is Not Working After R12.1.3 Upgrade (Doc ID 1505620.1)
Thanks,
Hussein

IPAD:How to configure e-mail account with libero paramiters

hi eveybody...
i bought an i-pad2 and i have some problem to configure account of e-mail with libero provider.
i tried to follow some guides on internet, but doesn't works.
i have a macbook...and to configure my email on it, i had to find a little programm(Macfreepops) to allow me to recieve.
anyone knows how i can configure my ipad?
many thanks

This is the MacBook Pro forums. You post belongs elsewhere where it will get the most attention. Start from the Support Communities Home Page and post it in the forum that's appropriate.

How to configure new mail notification?

Hi,
I want to set up SAP so that when a user receives a new mail in his/her SAP-mail inbox the system sends a notification to that user's email-adress (smtp-address) so that the notification will appear in Outlook. How can I do this?
Regards,
Thor-Egil

check out
[http://help.sap.com/saphelp_nw70/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm]
[http://www.tamboly.com/SAPEmailConfiguration.html]

Configure E-Mail Notification with several smtp servers

Similar Messages

Maybe you are looking for