Configure e-mail servers?

I'm at the library and trying to send OUT e-mail but it says the servers aren't correct. I can recieve mail, just not send. It says I can configure the mail servers in settings/email but I see no place for this. Please help.

I'm wondering if it's password related because it keeps saying that mail won't work because the password is wrong. However, when I go to the iCloud account it says password is fine.... There is also more than one iCloud listed in my mail, which only confuses matters more... Each of them seems to have the right password.
I used to have Apple ".me mail" which I could login and access straight from the net. Now I guess it's called iCloud but when I go to iCloud.com it forces you to download to your device. Is there no way to read/write icloud email via the Internet anymore?

Similar Messages

  • How to configure E-Mail servers in SAP?

    Dear All,
    | have configured e-mail server in R/3 properly (using SCOT tcode). However, when I am trying to send mails for testing purpose (using SBWP tcode), its showing status as "send process still running". But after some time, its showing status as "error during send process" 
    can any one please  help me troubleshoot this problem? Should you need any information, kindly let me know.
    Waiting for your kind immediate responses!
    Regards,
    Faisal

    Hi Brahmankar,
    I have gone through the notes and links you have sent me. Its very helpful and informative as well. Following are my observations and understandings:
    1. As I mentioned, we are on 4.6C , therefore tcode SICF is not executable to activate SAPConnect service. Its only available on WAS.
    2. I think I have to make use of SAP EXCHANGE CONNECTOR if its R/3 4.6C. Then only I will be able to configure SMTP mail server. Because,
        note#122657 says that:
    if you are using SAP system based on WAS 6.10 or above then you should use the SAPconnect (E)SMTP
    linkage for the exchange connection. You no longer need to install the SAP Exchange Connector
    3. Can you please confirm that I have to use SAP Exchange Connector to configure SMTP mail server?
    4. There is not SMTP node in tcode SCOT ! Only I get FAX and INT nodes. How to get the SMTP node?
    you said that:
    If you are running Exchange Server 2003, and 4.6C it will be tricky.
    could you please guide and help me in making this process tricky  ?
    That would be a very great help and I am looking forward to have your kind help for the same!
    If you need any other information from my side, kindly let me know.
    Thanks and Regards,
    Faisal

  • Configure E-Mail Notification with several smtp servers

    Hi all,
        We want to configure "reset password" and we must configure E-Mail notification.As http://help.sap.com/saphelp_nw2004s/helpdata/en/44/bf8f2069665991e10000000a422035/content.htm shown,we can "Separate multiple SMTP server entries with a semicolon (;)" So we can add several smtp servers,right?
    But I add some,only the company SMTP servers can be used,others cannot receive notification emails. What else should i configure?Can portal send emails to multiple domains ?
    Best regards,
    delma

    How can I configure my SMTP server for allow the SAP system to send mail through it.?
    I don´t know - I don´t know which mail server you use (software).
    Markus

  • TS1702 cannot send Mail   The connection to the outgoing server failed.  Additional Outgoing Mail Servers can be configured in Settings Mail, COntacts, Calendars

    Cannot send outgoing messages from my IPhone.  Receive the following message: 
                   Cannot Send Mail
                   The connection to the outgoing server"[email protected]" failed.  Additional OUtgoign Mail Servers can be configured in Settings> Mail, Contacts,                Calendar

    See here for troubleshooting the SMTP settings (outgoing mail server on your carrier's servers)
    http://www.apple.com/uk/support/iphone/mail/
    Often removing a mail service from iPhone and resetting works

  • How to change my password and my incoming and outgoing mail servers

    Hi I have used Outlook Express for years and I know how to configure "everything" I need within the settings pages because their settings pages are all "logical" with everything out in the open.
    However, Thunderbird "hides" their settings behind buttons and confusing screens.
    There are many tutorials that explain how to set up Thunderbird from the beginning, and show how to set up a new email account. But I have not been able to find a tutorial on how to change my email account password "after" I have been using Thunderbird for awhile.
    I also see no way to change the incoming and outgoing servers. For example, I have changed from one hosting company to another hosting company and I need to use the new mail servers from the new hosting company and I do not see any tutorials anyplace that cover ongoing or day-to-day activities with Thunderbird.
    Can you please change your settings screens to make Thunderbird easier for new people to find these normal and necessary items?
    Also can you please point me to a tutorial that shows me how to change my email account password and change my incoming and outgoing servers?
    Thanks so much!
    Edward

    If you wan to create an account, you must the delete the existing account.
    So take backup of your emails if your using POP3
    Two ways you can do it
    *Copy all the emails to Local folder
    *Back up your Mail folder from your profile
    For more
    *http://mozbackup.jasnapaka.com/
    *http://www.wikihow.com/Back-Up-Email-Files-in-Mozilla-Thunderbird
    *http://www.auralsolutions.com/2012/12/how-to-backup-thunderbird-data-emails-and-contacts/
    *http://email.about.com/od/mozillathunderbirdtips/qt/et_backup_prof.htm

  • How can I redirect all messages to 2 another mail servers?

    Hi all
    ./imsimta version
    Sun Java(tm) System Messaging Server 7.3-11.01 64bit (built Sep 1 2009)
    libimta.so 7.3-11.01 64bit (built 19:54:45, Sep 1 2009)
    I wanted to redirect all messages(in and out) to another mail server, I configured as follows,
    - imta.cnf
    ! tcp_local
    tcp_local smtp mx single_sys ....... sourcefilter file:///backother.filter
    ! tcp_intranet
    tcp_intranet smtp mx single_sys ....... sourcefilter file:///backother.filter
    - backother.filter
    require ["fileinto"];
    if address :all :matches ["From"]["*"]{
    redirect "[email protected]";
    keep;
    stop;
    One e-mail account receives all messgaes and those messages will be kept in sender's or receiver's mail storage.
    I want , however, redirect all messages 2 or 3 mail servers.
    I tried several things to do this include edit backother.filter(this is written in Sieve ), but I failed.
    Is there any way to redirect messages to another mail servers?
    Any way would be good , using sieve script, make antoher channel or channel keyword
    Thanks
    Edited by: leeky41 on Mar 9, 2010 10:58 PM
    Edited by: leeky41 on Mar 9, 2010 11:06 PM
    Edited by: leeky41 on Mar 9, 2010 11:07 PM

    leeky41 wrote:
    Redirecting the message means it will not be delivered to the original recipient.I know so I wrote 'keep' keyword to deliver messages to the original recipient.
    capture "[email protected]";
    I tested it but the capture's behavior was very weird, subject had changed to something like,'deliverd status notice', sender had changed to postmaster and additional notice messgae inserted into mail body.The default sieve capture action encapsulates the email to keep a copy of both the envelope information and the original message. MS7u3 also supports the Exchange journal encapsulation format through the addition of the ":journal" parameter.
    I edited 'capture' like this..
    capture :message "[email protected]";
    The ":message" flag removes the encapsulation -- therefore you will have no idea of who the original sender/recipients were as the envelope information has been discarded.
    It worked fine. It was same as the result of 'redirect'.
    but the following line, sent10 messages to each recipients.(receive_01,receive_02)
    capture :message "[email protected],[email protected]";
    maybe there was some 'loop' actions happened.The email produced by the capture sieve action is being "captured" which is resulting in a loop. You can stop this by adding an envelope test e.g.
    require ["envelope"];
    if not envelope :is ["to"] ["[email protected]","[email protected]"]
            capture :message "[email protected]";
            capture :message "[email protected]";
    }Regards,
    Shane.

  • How to configure Sendmail mail relay with authentication

    Hi,
           How to configure send mail relay.  Client gave us smtp host,port, username and password. We have a couple of server. If we configure the relay in any one of the server other servers able send mails using relay server. Please help me on this? 

    .Create an IT Resource of Type Mail Server. Give Name as "Email Server.Now populate the values for all the parameter for example Server,username,password and authentication type.
    .Go to System Configuration and in Email Server property value give the name of IT resource you created in step1 so the name will be "Email Server".
    http://forums.oracle.com/forums/messageview.jspa?messageID=3867506&stqc=true

  • Mail Adapter - Multiple mail ID and multiple mail servers config.

    Hi All
    I am doing BPM synch scenario in which i get the response from SAP box and send the response via email adapter. I am using mail.xsd and doing mail config. in message mapping. However in the TO field i am able to give only one email ID. If i give multiple email ID's mail is not received. I tried comma and semi-colon as separator. Still not working? I have two questions in configuring TO option:
    1) How to send to multiple id's? I am using Lotus Notes.
    2)How to send to multiple mail servers? I have to send to Lotus Notes id's and outlook express id's also simultaneously.
    Thanks for your help in advance
    Warm Regards
    Samuel

    Hi,
    Please find here with some observations about it,
    1) How to send to multiple id's? I am using Lotus Notes.
    If you have specified an IMAP server under URL, the message is saved in the specified folder but is not sent to the receiver specified under To.
    Then even if Under To, you had specified the e-mail address that will receive the message would be separated with a semicolon. It will not work.
    Please verify about it .
    The below link will also help you to verify if there is anything missing
    Mail Adapter (XI) - how to implement dynamic mail address
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
    BPM:Single Sender and Multiple Receivers based on synchronous
    exchange(switch) part-1
    /people/prasadbabu.nemalikanti3/blog/2006/03/10/bpmsingle-sender-and-multiple-receivers-based-on-synchronous-exchangeswitch-part-1
    Generic Message Interface in SAP Exchange Infrastructure Email Integration Scenarios
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00d5a235-4803-2a10-f682-889d67c69975
    (If your using Alert Framework then)
    If you want to send it to multiple email addresses and all email addresses are user of XI then you can define "Role" and attach that role to everyuser and make this role as receipent of alert .
    Thanks
    Swarup
    Thanks
    Swarup

  • SAP J2EE engine for configuring Java mail Service.

    Hi
    I am experiencing following exception when trying to use JAVA mail API.
    javax.mail.SendFailedException: Invalid Addresses;
    nested exception is:
    javax.mail.SendFailedException: 554 <email@ddress>: Recipient address rejected:
    Relay access denied
    email address above is valid..
    I have to use SAP J2EE engine for configuring Java mail Service.
    But is does not hav any such access permissions to check....!!

    Relay access denied
    To send mails from SAP system through the mail server which you have configured, SAP server should be permitted to relay through the mailserver. Then only you will be able to send mail to external email address. Otherwise, you will get the above message.
    You must contact the mail server administrator and ask him to add the ip of SAP server into the allowed relay list.
    If you are using MS exchange server as your mail server and if you have administrative access to the Exchange box, you can do it yourself by following the below steps:
    1.Verify that your Exchange computer is not an open mail relay. To do this, follow these steps:
    a.      Click Start, point to Programs, point to Microsoft Exchange, and then click System Manager.
    b.      In Exchange System Manager, expand the following object:
    Servers\Your_Exchange_Server_Name\Protocols\SMTP
    c.      Right-click the virtual SMTP server where you want to prevent mail relay, and then click Properties.
    d.      Click the Access tab, and then click Relay.
    e.      By default, open relay is blocked. The default settings are as follows:
    u2022     The Only the list below check box is selected.
    u2022     The Allow all computers which successfully authenticate to relay, regardless of the list above check box is selected.
    f.      If you must permit a single computer, a group of computers, or a domain to relay through the server, click Add. In the Computer dialog box, click the appropriate selection for the computers you want to relay through the server. Then, type the required information.
    Note Enabling access by IP address or by domain name is helpful for users who do not authenticate with the Exchange computer.
    g.      In the Relay Restrictions dialog box, click OK.
    h.      Click Apply, and then click OK in the Default SMTP Virtual Server Properties dialog box.
    hope this helps you out...
    Cheers,
    Jazz

  • Email configurations - Incoming mails

    Hi,
    We are configuring both outgoing and incoming mails. In the note 455140 point 5 explains some settings to be done in Mail server.
    Our Mail admin asking clear documentation regarding routing mail from Exchange server 2007 (SMTP server) to SAP system.
    Port used in sap system for smtp plugin is 25000.
    Please let me know how to do this.
    Regards,
    Nallasivam.D

    Hi
    http://mysapinkpot.blogspot.com/2007/11/configuration-sending-mails-from-sap.html
    http://www.erphome.net/wdb/upload/forum1_f_4357_1102409717.doc
    U can configure out going mails from your SAP system by using SMTP.
    have a look on the below link.. u can get complete picture of the mail configuration.
    http://help.sap.com/saphelp_nw04s/helpdata/EN/af/73563c1e734f0fe10000000a114084/content.htm
    they have explained every thing clearly there and also have a look on the below note.
    SAP Note 1205132 - Configure SMTP Destination to use multiple email servers
    Hope it will help you
    Regards
    Uday

  • Configure 2 Ldap servers on C370

    hello everyone,
    we are consdering to configure a dual bundle C370 to Host a production and sumulation environement simutanously.
    from Netwotking and mail flow plicies i think this is possible.
    but i am not sure about Ldap profiles.
    is it possible to configure two Ldap servers an associate each one with the adequate domain.
    regards

    If they go in via the notification message they get in their email, they don't need authentication.
    But if they need to do more than release that specific message, they'll need auth.
    Go to Monitor/Quarantines
    In the row for Spam Quarantin there's an "Edit" link on the far right, click that.
    There's a section called End-User Quarantine Access, where you can turn on how users get access to the Quarentine.  Pick LDAP.
    You'll need to turn on and configure the Spam Quarantine End-User Authentication Query and the Spam Qarantine Alias Consolidation Query in your LDAP profiles under System Administration > LDAP

  • Trouble while configuring Apple mail

    Hi,
    While configuring apple mail to send / receive mails from Net4India's mail servers, it shows login errors all the time. The error message shows that your user name or password is incorrect although the settings are correct. (I am able to send /receive from my gmail account)
    Kindly help me!!.
    Message was edited by: aravindnr

    With email servers, there generally are two possible forms of Username, and Mail will not guess which is required. The two forms are either the portion of the email address in front of the @domain, or the entire email address entered as the Username in the Preferences. Make sure to check with both forms.
    There are a few providers who have special codes, not based upon the email address, and you would have to check for that with your provider.
    Ernie

  • Sending to multiple mail servers

    Hello,
    Can Ironport be configured to send email to multiple mail servers? I don't mean load balancing or failover. What I want is for the Ironport to send the same inbound email to two separate mail servers.
    Regards,
    Xavier

    I think you need to use a message filter. Something like this:
    bccMessageFilter:
    if ((mail-from == '^xavier$') and (rcpt-to == '^lloyd$'))  {
         bcc('[email protected]', '[Bcc] $Subject', '$EnvelopeFrom', '[IP/hostname of alt mail server]');
    Note: I haven't tested this.      

  • I have several users in an exchange environment who cannot email a photo from the iPhone.  When the click on Email Photo, they are prompted to configure a mail account even though there is already an exchange account in place.  How do I remediate this?

    I have several users in an exchange environment who cannot email a photo from the iPhone.  When the click on Email Photo, they are prompted to configure a mail account even though there is already an exchange account in place.  How do I remediate this?  Not all of the users in our environment have this issue.  If the users having this issue, install a secondary email account, Gmail, Hotmail, etc, then they can send through those accounts.  Why would the exchange account not be seen to send photos?

    Sounds like it worked until the policies associated with the account that are creating the problem were fully pushed down.
    Try setting up a new (test) Exhange account and see if it behaves the same way on the phone (after removing the problem account from the phone, of course).

  • How to configure multiple smtp servers per domain

    Hi,
    how do we configure multiple smtp servers per domain/corporate in iplanet messaging server 5.2. i wanted to do this so that i can configure some domains with virus scanning and some domains without antivirus.

    Hi Martin,
    Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
    Now the question goes as follows:
    Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
    Thanks in anticipation,
    Ruchi/Saurabh

Maybe you are looking for