Configure EAS to use JRE_1.6 --1.6.0_07
Hello first post.
We are using EAS 11.1.2.1 trought the weblink http://lab1324a:10080/easconsole/console.html
We have JRE_1.6 --1.6.0_07 installed in all of our machines. If upgrading the JRE is not an option.
Can I change some configuration or properties file in the server or in my workstatoin to get teh EAS console to work with the JRE_1.6 --1.6.0_07 ?
EAS is a JNLP (Java Web Start) app that downloads its resources from the server, and does not look to the client environment for runtime libraries - so no need to upgrade anything
If you want to change the Java Version that the EAS JNLP uses, edit the <j2se version=""> tag:
E.g. <j2se version="1.6.0_07+" href="http://java.sun.com/products/autodl/j2se"/>
Regards,
Robb Salzmann
Oops, I thought somehow my post didn't take and posted again, not realizing the thread itself was duplicated.
Edited by: Robb Salzmann on May 4, 2011 2:32 PM
Similar Messages
-
Full screen issue when utilizing Ease of Use on screen keyboard and RDP in Win8.1
Hello,
I am exploring using touch technology with our point of sale application which is delivered to our clients using RDP. The default touch keyboard in Win8 is basically useless for our application so we enabled the touch keyboard under Ease of Use (EoU)
which does meet our requirements. We enabled the KB in docked mode so it is always displayed and locked to the bottom of the display. The issue is that when we start an RDP session in full screen mode, the RDP session is using the whole screen
and slipping under the docked EoU KB. Is there a means to have RDP recognize the reduced screen size with the EoU KB docked and only use the available screen real estate? I understand that I can configure the RDP settings manually and approximate
what I'm looking for but this drops the session into a window which is somethibg I'm looking to avoid.Hi Steve,
Thank you for post in Windows Server Forum.
As per my research, I can say that you need to set the RDP screen size manually. So after setting the size of Full screen RDP you can able to use. You can also try to switch the application in Remote Desktop connection by “Ctrl+Alt+Break”. Please check
the shortcut to be used when using RDC.
Keyboard shortcuts
http://windows.microsoft.com/en-in/windows/keyboard-shortcuts#keyboard-shortcuts=windows-8
Hope it helps!
Thanks,
Dharmesh -
'register with shared services' option missing while configuring eas
I am facing some issues while configuring a new epm system:
While configuring eas 11.1.2.0, I am not getting the option' Register with Shared Services'. but otherwise, the configuration is successful. As a result, I don't see the Business Rules option in Shared Services/Application Groups. But we are able to use eas console and do see business rules node in eas console.
How do I get configurator to show this option?
I was able to configure and register all other Hyperion applications.
Thanks,
Edited by: 784749 on Mar 28, 2012 12:35 PM
Edited by: 784749 on Mar 28, 2012 12:59 PMOne way is to use the registry tool though make sure you backup the shared services database before running the utility.
It is located in <MIDDLEWARE_HOME>/user_projects/<instancename>/bin
to change the status for EAS for HSS then run the following
epmsys_registry updateproperty BUSINESS_RULES_PRODUCT/system_tasks_configuration/@hubRegistration Pending
Now if you run the configurator again it should let you select just Essbase Administration Services, you dont need to select the child components.
It should then registry with Shared Services.
Cheers
John
http://john-goodwin.blogspot.com/ -
Shared Services Registration Failed While Re-Configuring EAS
Hi
I was re-configuring EAS and my shared services and deployment failed.I reached out to oracle and they gave me a solution to delete the HBR instances.
But when I try to open the url in microsoft word it opens in html format .And i am unable to delete any HBR instance.What is the correct way to do it?
The solution offered by Oracle Support:
To resolve this issue, do the following steps:
1. Log into the User management console using the URL http://localhost:58080/interop/index.jsp.
2. Append the URL to show the files http://localhost:58080.interop/content/files
3. Copy this URL and open in Microsoft Word. (file->open option in MS Word)
4. Provide username (admin) and password (password).
5. Check in AdminProjects, Products and Projects folders for the files and folders related to HBR and delete any occurences.
6. Save and close the file.
7. Restart the services.
8. Configure EAS with Shared Services using the config utility.
9. For Business Rules to work, go to \Hyperion\AnalyticAdministration\storage\easuser location and delete all contents from the easusers folder.
10. Restart the EAS server.
Thanks
ZI never really used the method with word and always used davexplorer which can be downloaded from http://www.davexplorer.org/download.html
Follow the rest of the instructions which you posted to delete HBR.
Cheers
John -
Can we configure EAS and Shared services wih out a Database
Hi All,
Can any one please let me know if we can configure Essbase administration servies ans Shared services with out giving Database details while configuring.
If Database schema is not yet ready to use, is it possible to configure EAS and login to Essbase to create an outline with dimension building and Dataloading.
RegardsHi,
I doubt it as when you start up the web applications they try and communicate with the databases, if they fail then the web app won't start up fully.
Cheers
John
http://john-goodwin.blogspot.com/ -
How to configure sendmail to use multiple LDAP servers ?
Hi everybody!
I have a sendmail running on Solaris 10 and a LDAP server(192.168.1.9) also running Solaris 10 OS. I have configured the sendmail the following way:
bash-3.00# ldapclient list
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=email,dc=reso,dc=ru
NS_LDAP_BINDPASSWD= {NS1}*********************
NS_LDAP_SERVERS= 192.168.1.9
NS_LDAP_SEARCH_BASEDN= dc=email,dc=domain,dc=ru
NS_LDAP_AUTH= simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= sub
NS_LDAP_SEARCH_TIME= 30
NS_LDAP_CACHETTL= 43200
NS_LDAP_PROFILE= default
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_BIND_TIME= 10
I also have another LDAP server (IP 192.168.1.10). It is configured as a replicant of the 192.168.1.9 LDAP server.
The question is how can i configure sendmail to use both LDAP servers ?
The man pages explain how to configure ldapclient to use ONE server and what if want to use two or more? All the settings and the profiles the same.
Thanks in advance =))Hi!
To add LDAP servers to the Solaris ldapclient, you might use the ldapclient command:
ldapclient manual -v -a defaultServerList="servera.yourdomain.com serverb.yourdomain.com"
But this is only failover, AFAIK the Solaris ldapclient does not perform loadbalancing by itself.
But I am not sure about your sendmail programm. Normally, sendmail has its own configuration
and can be configured to use LDAP e.g. for aliases etc.
Regards!
Rainer -
I have set up our school ipads to be supervised by Apple Configurator and am using VPP to buy apps. I did this initially as our school internet connection was stopping us from being able to update the IOS and our County was offering a managed system, Lightspeed, which took control of every device in school which proved very expensive. I now find the supervised ipads do not allow the pupils to download photos or movies etc. As we frequently use the ipads as cameras this is causing us a problem. We have a school imac that I use to keep the devices updated with Apple Configurator (not connected to our network), and this doesn't seem to offer any solution to download them either. I was told there was a setting in Apple Configurator to allow other computers to download from supervised devices, but I can't see it anywhere. I am very new to this so any advice or help would be greatly appreciated please.
I assume you are wanting to take the photos and movies off the iPads?
Connect the iPad to a Apple computer. Open "Image Capture". Any photos or video can me imported to the desktop or other location on your computer.
I had this same problem last year and as we have no wifi I asked lots of people at Apple what I could do - no one provided this answer (a little unbelievable!). If you have wifi using something like dropbox would be an easier solution.
Hope this helps -
I am looking for cheap easy to use camcorder for my little nephew. He's 8. Since I want him to be able to shoot video and then use it with iMovie '08 it's not just ease of use in the camcorder I'm looking for, but ease of use with iMovie '08.
I'd like some opinions of using iMovie '08 with either of these cameras.
Aiptek A-HD 720P - $130
Flip Ultra - $85
From what I have read, the Aiptek H.264 files drop right into iMovie '08, but the files from the Flip Ultra need converting before hand. The flip might have ease of use as a camera going for it, but I think the converting might be a downside.
What do you guys think? Ever use either of these with iMovie '08? Any hassles to be aware of? Thanks for the info in advance.If you have a deadline of 12 days you are risking a lot gambling that you can learn FCE in that time.
As David says, some people might be able to do it but until you try there is no way of knowing whether you are one of those, and if you aren't it's too late.
If it is possible to finish it in iMovie, that should be your course.
FCE bears no resemblance to iMovie so it's not just a matter of making a natural progression, it's an entirely different mindset. -
Camcorder options for HD and ease of use
I am new to the mac computer and also looking at buying one of two models of camcorders and wanted to see what the mac specialist help. I am interested in the Sony HDR-SR10 40GB High Definition Handycam (I like the 10 mega pix still option) or the Cannon VIXIA HG10. I have received mixed information at the electronic stores about which would work well with the apple system. Any recommendations on ease of use for a novice with apple? Thank you.
Welcome to iMovie Discussions.
For a bit of info on the Sony, see camcorderinfo here, and on the Canon, see here.
Hard-disc hi-def camcorders record video in AVCHD format, which has to be converted into a slightly different 'Apple Intermediate Codec' format during importing into iMovie, for editing. This works OK with fast, Intel-based Macs (..all the most recent models..) but will NOT work with older PowerPC-based Macs (two or three years old) unless you download a separate program called VoltaicHD (click here).
On slower Macs you may find that the import lags slightly behind the 'real time' movie, as the video is converted during the import.
Video from hi-def camcorders which record onto miniDV tape (instead of a hard disc or memory chips or miniDVDs) using the HDV mode (instead of AVCHD) can be imported straight into any older PowerPC-based Mac or a newer Intel-based Mac ..but, again, there may be a lag during import if using an older PowerPC-based Mac, but not on any current fast Macs. -
Should Windows 10 provide ease of use virtual machine to run Android, Windows XP, etc applications
In Windows 7, I really like the easy access to Windows XP Mode that enabled me to have full compatibility to my older hardware scanner and its software (which I still use today). Similarly, I love my Z30 Blackberry phone which allows me to run Android
applications in addition to those from the Blackberry store.
My suggestion for Windows 10 is to provide a built in virtual machine option (ease of use) that would allow my Windows machine to install and run the multitude of Android applications that are currently available.
I believe an ease of use feature like this in Windows 10 would become a real differentiator for Windows eco systems, such as Windows Phones and Windows Surface and help promote sales and product adoption. To me it is another way of looking at the product
and making it the best in any world... Kind of like running the MS Office product on a Mac.
Objects - first class citizens: identity, public interfaces and the authority for their own behaviour and stateOn Fri, 21 Nov 2014 18:12:19 +0000, ToServe wrote:
My suggestion for Windows 10 is to provide a built in virtual machine option (ease of use) that would allow my Windows machine to install and run the multitude of Android applications that are currently available.
I believe an ease of use feature like this in Windows 10 would become a real differentiator for Windows eco systems, such as Windows Phones and Windows Surface and help promote sales and product adoption. To me it is another way of looking at the product
and making it the best in any world... Kind of like running the MS Office product on a Mac.
Microsoft Office for Mac was purposefully written for Macs, it doesn't use an emulator to run the PC version. Microsoft earns revenue from the sales of Microsoft Office for Mac.
You're not going to see Microsoft going out of their way to enable running Android apps on Windows 10.
Paul Adare - FIM CM MVP
I just went visual on this goofy looking Finn riding on a gnu, wielding
one pissed off penguin... gah -- Bob The Sane -
dear associates,
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instancedear associates,
can u please assist me how can over come this error or problem.
linux version: red hat enterprise linux 4.0.
EBS version: 12.1.1
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance -
How to configure Firefox to use OpenVPN?
summary: I'm running OpenVPN from a Debian client through a Debian jumpbox/server. After I [start the server, start the client] most IP-based applications (DNS, ping, ssh) seem to work from the client, but client's Firefox cannot connect to http://www.whatismyip.com/ (or any other URI). How to configure Firefox to use the VPN? or otherwise fix the problem? or further debug it?
details:
I have a laptop running debian_version==jessie/sid with Firefox version=33.0 which needs to access a compute cluster. The cluster formerly required only an SSL VPN (enabled by a Firefox plugin) to access, but now has several additional requirements, which I seek to satisfy by running the SSL VPN through a jumpbox running an OpenVPN server. The jumpbox is running a "vanilla" Debian 7.7.
I have been using the laptop successfully for a few years without network problems. Currently I have the laptop connected by wire directly to an ISP-supplied modem/router. With `openvpn` NOT running on the laptop, I see:
* `ifconfig` shows no entry='tun0' (just "the usual" entries for 'eth0', 'lo', 'wlan0'), and shows the expected client IP# bound to 'eth0'.
* I can `ping` my jumpbox/server using its real IP#, but cannot `ping 10.8.0.1`
* I can `ssh` to my jumpbox/server using its real IP#, but cannot `ssh 10.8.0.1`
* `nslookup www.whatismyip.com` gives correct results
* browsing to http://www.whatismyip.com/ shows my client's IP# (as also shown in `ifconfig`)
Both my client/laptop and server/jumpbox setups are quite generic OpenVPN-wise, and are almost exactly as described on the Debian wiki
https://wiki.debian.org/openvpn%20for%20server%20and%20client
me@jumpbox:~$ date ; cat /etc/openvpn/server.conf
Sat Nov 8 16:49:00 EST 2014
port 1194
proto udp
dev tun
ca /etc/openvpn/ca.crt
cert /etc/openvpn/server.crt
key /etc/openvpn/server.key
dh /etc/openvpn/dh1024.pem
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 8.8.8.8" # google public DNS
keepalive 10 120
comp-lzo
user nobody
group nogroup
persist-key
persist-tun
status openvpn-status.log
verb 3
me@laptop:~$ date ; cat /etc/openvpn/client1.conf
Sat Nov 8 16:51:31 EST 2014
client
dev tun
proto udp
remote ser.ver.IP.num 1194
resolv-retry infinite
nobind
user nobody
group nogroup
persist-key
persist-tun
mute-replay-warnings
ca /etc/openvpn/ca.crt
cert /etc/openvpn/client1.crt
key /etc/openvpn/client1.key
ns-cert-type server
comp-lzo
verb 3
up /etc/openvpn/update-resolv-conf
down /etc/openvpn/update-resolv-conf
My jumpbox/server firewall is currently set to forward everything, using `iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE`:
me@jumpbox:~$ date ; sudo iptables -L
Sat Nov 8 16:42:06 EST 2014
Chain INPUT (policy ACCEPT)
target prot opt source destination
fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain fail2ban-ssh (1 references)
target prot opt source destination
RETURN all -- anywhere anywhere
After I start `openvpn` on first the server and then the client, I see no OpenVPN errors on either the server or the client:
me@jumpbox:~$ sudo openvpn --script-security 2 --config /etc/openvpn/server.conf &
Sat Nov 8 17:48:25 2014 OpenVPN 2.2.1 x86_64-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jun 18 2013
Sat Nov 8 17:48:25 2014 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sat Nov 8 17:48:25 2014 Diffie-Hellman initialized with 1024 bit key
Sat Nov 8 17:48:25 2014 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Sat Nov 8 17:48:25 2014 Socket Buffers: R=[212992->131072] S=[212992->131072]
Sat Nov 8 17:48:25 2014 ROUTE default_gateway=ser.ver.gate.way
Sat Nov 8 17:48:25 2014 TUN/TAP device tun0 opened
Sat Nov 8 17:48:25 2014 TUN/TAP TX queue length set to 100
Sat Nov 8 17:48:25 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Nov 8 17:48:25 2014 /sbin/ifconfig tun0 10.8.0.1 pointopoint 10.8.0.2 mtu 1500
Sat Nov 8 17:48:25 2014 /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.2
Sat Nov 8 17:48:25 2014 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Sat Nov 8 17:48:25 2014 GID set to nogroup
Sat Nov 8 17:48:25 2014 UID set to nobody
Sat Nov 8 17:48:25 2014 UDPv4 link local (bound): [undef]
Sat Nov 8 17:48:25 2014 UDPv4 link remote: [undef]
Sat Nov 8 17:48:25 2014 MULTI: multi_init called, r=256 v=256
Sat Nov 8 17:48:25 2014 IFCONFIG POOL: base=10.8.0.4 size=62, ipv6=0
Sat Nov 8 17:48:25 2014 ifconfig_pool_read(), in='TomRoche,10.8.0.4', TODO: IPv6
Sat Nov 8 17:48:25 2014 succeeded -> ifconfig_pool_set()
Sat Nov 8 17:48:25 2014 IFCONFIG POOL LIST
Sat Nov 8 17:48:25 2014 TomRoche,10.8.0.4
Sat Nov 8 17:48:25 2014 Initialization Sequence Completed
me@laptop:~$ sudo openvpn --script-security 2 --config /etc/openvpn/client1.conf &
Sat Nov 8 17:49:12 2014 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sat Nov 8 17:49:12 2014 Socket Buffers: R=[212992->131072] S=[212992->131072]
Sat Nov 8 17:49:12 2014 NOTE: UID/GID downgrade will be delayed because of --client, --pull, or --up-delay
Sat Nov 8 17:49:12 2014 UDPv4 link local: [undef]
Sat Nov 8 17:49:12 2014 UDPv4 link remote: [AF_INET]jump.box.IP.num:1194
Sat Nov 8 17:49:12 2014 TLS: Initial packet from [AF_INET]jump.box.IP.num:1194, sid=25df7af6 0ece4089
Sat Nov 8 17:49:13 2014 VERIFY OK: depth=1, <my config data/>
Sat Nov 8 17:49:13 2014 VERIFY OK: nsCertType=SERVER
Sat Nov 8 17:49:13 2014 VERIFY OK: depth=0, <my config data/>
Sat Nov 8 17:49:14 2014 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Nov 8 17:49:14 2014 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Nov 8 17:49:14 2014 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Nov 8 17:49:14 2014 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Nov 8 17:49:14 2014 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Sat Nov 8 17:49:14 2014 [TomRoche] Peer Connection Initiated with [AF_INET]jump.box.IP.num:1194
Sat Nov 8 17:49:16 2014 SENT CONTROL [TomRoche]: 'PUSH_REQUEST' (status=1)
Sat Nov 8 17:49:16 2014 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 8.8.8.8,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5'
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: timers and/or timeouts modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: --ifconfig/up options modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: route options modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Sat Nov 8 17:49:16 2014 ROUTE_GATEWAY lap.top.gate.way/255.255.255.0 IFACE=eth0 HWADDR=la:pt:op:MAC:ad:dr
Sat Nov 8 17:49:16 2014 TUN/TAP device tun0 opened
Sat Nov 8 17:49:16 2014 TUN/TAP TX queue length set to 100
Sat Nov 8 17:49:16 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Nov 8 17:49:16 2014 /sbin/ip link set dev tun0 up mtu 1500
Sat Nov 8 17:49:16 2014 /sbin/ip addr add dev tun0 local 10.8.0.6 peer 10.8.0.5
Sat Nov 8 17:49:16 2014 /etc/openvpn/update-resolv-conf tun0 1500 1542 10.8.0.6 10.8.0.5 init
dhcp-option DNS 8.8.8.8
Sat Nov 8 17:49:16 2014 /sbin/ip route add lap.top.IP.num/32 via lap.top.gate.way
Sat Nov 8 17:49:16 2014 /sbin/ip route add 0.0.0.0/1 via 10.8.0.5
Sat Nov 8 17:49:16 2014 /sbin/ip route add 128.0.0.0/1 via 10.8.0.5
Sat Nov 8 17:49:16 2014 /sbin/ip route add 10.8.0.1/32 via 10.8.0.5
Sat Nov 8 17:49:16 2014 GID set to nogroup
Sat Nov 8 17:49:16 2014 UID set to nobody
Sat Nov 8 17:49:16 2014 Initialization Sequence Completed
I then see the following on my client:
* `ifconfig` shows a new entry=`tun0`, which looks correct
* I can `ping` the server using either its real IP# or `10.8.0.1`
* I can `ssh` to the server using either its real IP# or `10.8.0.1`
* `nslookup www.whatismyip.com` gives correct results
... but I get no connection if I open a new instance of Firefox and browse to http://www.whatismyip.com/ :-( "Looking up www.whatismyip.com..." succeeds quickly but the status line continues to display "Connecting to www.whatismyip.com..." until the attempt times out. I also get the same behavior (connection timeout) if I open a new instance of Chrome, or if I browse to http://www.whatismyip.com/ with a Firefox opened prior to starting OpenVPN. FWIW I get the same behavior browsing to any URI, including (e.g.) Google.
This is a major problem for me! For the SSL VPN to work, I need to start a Firefox and run it (since the SSL VPN's vendor only supports it on Linux via a Firefox plugin) to access a particular remote-access website. Furthermore I need the SSL VPN to run through the jumpbox/OpenVPN. (Don't ask, it's a long, sad story ...)
Is there something I must do to configure Firefox to use the VPN? Or is there some other way to fix this?
Alternatively, what should I do to further debug the problem? It just seems odd to me that the other services work (e.g., `nslookup`, `ssh`) but Firefox does not. That being said, both Firefox and Chrome fail in this usecase, so the problem might be generic to web browsers.
your assistance is appreciated, Tom Roche <[email protected]>You're kidding. You have to go through that rigamarole just to put your bookmarks on your own server? Where's the simple FTP option?
Also, the above-linked article has a broken link. The link to the weaveserver (which is what you have to set up on your own server) is no good, and there is no obvious replacement. There are plenty of Weave-related repositories here:
http://hg.mozilla.org/labs
but it's not clear what you need. -
New music player not satisfactory no eas of use an...
Music Player for Symbian^3 Version 16.10.38.
Device details Nokia N8 OS Symbian Anna, Software Version 022.014(.356.02=Custom)
There was a time that I was telling friends that now cell phones are equipped with all the best features when it comes to music also. But that was thing of the past.
1. Artist & Albums Menu. No Separate selection for each available.
a. Artist:
How it is: Artist names are shown with album names.
Problem: If one had to play all songs of (single) desired artist, he can’t as he doesn’t get “PLAY ALL SONGS” option in that.
How it should be: Type or scroll to the desired artist name, tab (open) it then you will find out options as “Play all songs” or “Play Album (named separately as XXX, XYZ)”. Previous Media Players had that option.
b. Albums:
How it is: As explained in Artist menu.
Problem: I have albums which are multi artists (especially Indian movie songs which are mostly various artists) so if one had to listen to that complete album, he simply can’t.
How it should be: As explained above for artists. Previous Media Players had that option.
2. No type tool available to search in desired fields.
How it is: The most important thing, the typing tool is unavailable,
Problem: If one have huge music collection and have to search for song either by artist, album, genre, or by all songs option, the only way is to scroll, while scrolling he is guided by alphabets but still it not powerful tool.
How it should be: It’s easy to find if one just type the first few alphabets (of first or any word in the field) works as filter, whatever you typed remains on screen the rest hides. Previous Media Players had these options.
3. Missing Music Composer Menu.
As these options were available in older phone’s media players like Nokia N95, N73 etc but in new once they are missing, Changing in manifestation is good, adding new and attractive features is great, improvement in ease of use is best but eliminating power features is doing something which is equal to downgrade to Stone Age............ I don't think so people will appreciate.
4. Custom Equalizer Settings.
How it is: There few selective factory presets for the equalizer.
Problem: There are millions of Genres Worldwide and not every part of the world matches the music presets they stored in device and most of time people match the sound on their Audio devices (Car Stereo, Home and other) so they need to edit the equalizer for the best optimum sound quality.
How it should be: As in older devices had and one can change and save his own setting.
5. Expecting to add more menus: Suggestions for more menus (like year, mood etc) will be greatest things you will do.
Who will go and buy a separate device just for music if he has all these features supported by his cell phone specially when the manufacturer claims that it have music player inside.
People don’t have to stop on highways or stop skating for a while just to select the next song, allow people to go by several options.
In one simple line to explain, keep all the options of older music player, just change the display styles to new one. Add the suggestions.Yep as I said in my post tried that obviously aswell as ... well, the other things i mentioned in my posting.
Now does anyone have any ideas? -
Hi,
I'm working with the XDB Ease of Use Tools for Structured Storage.
While executing the prvtxutil.plb file, I get the following error:
SQL> SHOW ERRORS;
Fehler bei PACKAGE BODY XDB.DBMS_XMLSTORAGE_MANAGE:
LINE/COL ERROR
2220/4 PL/SQL: Statement ignored
2220/15 PLS-00306: Falsche Anzahl oder Typen von Argumenten in Aufruf von
'ISXMLTYPETABLE'
2322/4 PL/SQL: Statement ignored
2322/15 PLS-00306: Falsche Anzahl oder Typen von Argumenten in Aufruf von
'ISXMLTYPETABLE'The file dbmsxutil.sql which I executed before ran without a problem. That´s annoying.....
The version of the prvtxutil.plb file which I have, was updated 25.01.2011, 10:34:56.
Has anyone the same problem or a solution for this?
Maybe it's a bug and someone has a previous version of the prvtxutil.plb which works and who can post it here....
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
5 Zeilen ausgewählt.Report any issue with the toolset on the official thread here: The "Offical" XDB Utilities thread. (via the FAQ XMLDB forum link on the mainpage)
-
I got an ipad mini and when i try to switch it on and configure it to use it it says IP is temporarily blocked for security reasons..what do i do?
An odd message? Is this on your home network? Could try at a library.
Robert
Maybe you are looking for
-
User exit / substiution / badi for changing baseline date
Dear Experts , I have a requirement to change the base line date of residual document created in F-28 / F-32 to the base line date of original document getting partially cleared . I have explored the option of substitution but
-
Using Graph as an Indicator or Control
Hi all I have a simple question. How can i use the single GRAPH as an Indicator type or a Control type by means of a boolean switch? Such that 1) if i use it as an indicator then the Cursor automatically go to the calculated x and y coordinates 2) I
-
Search feature in outlook only returning "no results" all of a sudden. Why?
I use outlook for my mail. all of a sudden, the search feature just returns a "no results" solution. Any ideas why?
-
Have tried following but no solution so far: 1. Uninstall and reinstall 2.Removed com.adobe.photoshopElements.Plist, and further uninstall and reinstall 3. Set up new admin account (to address possible missing permissions) and launched PSE 11 but sam
-
Java not running with windows 7 and IE 9
Hi, I have a new laptop window 7 operating system and i have downloaded Java 7 and have IE 9. But, my Oracle applications is not running. Does/ did anybody have this problem?? Please advise. Thanks in advance, Vasu