Configure EP to display contents from Solution Manager

Hello,
How to Configure EP to display contents from Solution Manager? I want to access Solution Monitoring through Portal, how to do this?
I will appreciate if someone can help me,
Waiting for reply,
Regards
Sharmishtha

Hello Lee
I want to display solution monitoring on portal. I will access the portal instead of solution manager to view CCMS alerts.
I have configured ccms in solution manager which is my central system, so now i want to display these contents on portal.
is there any way i can do this task. I have solman 4.0 with SP15. I use work center for this configuration.
Will appreciate if you can direct me the right way.
Thank you
Regards
Sharmishtha

Similar Messages

Problem in installation of Business Content for Solution Manager

Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lot

HI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar

Is TRex required to display content from Content Server in the Portal?

Hi all gurus!
A short question: do you have to have TRex (or any other search/index engine) when you want to display content from a SAP Content Server in the portal? Or does the content server has its own search/index engine?
Best regards
Benny Lange

Hi,
Sap content server can be added in the portal as an KM repository. So configuration is needed. But when finished you can open and look at the content server like they are normal KM folders. TREX on the other hand is advisable in order to have the means to quickly find something in your content server. Otherwise it is like any other stupid file structure. lots of files and lots of folders.
Depending on you portal version you need to install a bussiness pack for document managment to get the content server visable in KM
Greetz

Email alert from Solution Manager

Hi
I have configured both System and Business Process Monitoring in SAP Solution Manager.
I can catch all the errors and display them in the graphical view, I can see details and so on.
Unfortunately I don't receive any email alert from Solution Manager.
Could somebody provide me a check list to verify where's the problem and why I can't receive email alert?
Thank you
Alessia

Hi Alessia,
I´d like to help you, but could you plz provide me some more information about your configuration: auto reaction methods, scot, type of monitors etc.
Dom

SAP GUI 7.10 - Issue reading files from Solution Manager

Hi everyone,
We have just installed SAP GUI 7.10 on our PC and have tried to open documents from Solution Manager.
On both Display and Change mode we are getting "The document cannot be displayed" (SOLAR_DOC021)
Can you suggest anything regarding the source of the problem? Any quick resolution?
Thank you
Corinne

Found it myself. Tricky indeed.
http://service.sap.com/patches
- Search for Support Packages and Patches
- Enter Search Term "SAP GUI"
- Select SAP GUI FOR WINDOWS
- Select SAP GUI FOR WINDOWS 7.10 CORE
- Select SAP GUI FOR WINDOWS 7.10 CORE, on the next page also
- Select Win 32
- Arrive at avail. downloads
Regards,
Nathan

Upgrade ASAP roadmap content in Solution Manager

Hello,
Does anyone of you know how to upgrade the ASAP roadmap content in solution manager?
Current we have solution manager 4.0, SP12. The version of the ASAP roadmap content is V3.6 (Dec. 2006). We currently found from the service marketplace the lastest ASAP implementation roadmap (V3.7)
https://websmp106.sap-ag.de/roadmaps.
Is it possible to somehow "upload" this new version into Solution Manager roadmap to replace the older version? Or how should we get the roadmap content upgraded?
Many thanks for your input!!
Regards,
Li

It is delivered in ST-ICO SAP Solution Manager Implementation Cont. Ver 3.6 is in SP11, I would imagine V3.7 is in SP 13.
You would have to up your service pack or use the standalone one until then.
Derek

SSO from Solution Manager to Wily Enterprise Manager issue

Hi,
We are facing problem in SSO from Solution Manager to Wily Enterprise Manager. We have done the configuration as per the Wily Enterprise Guide- "Introscope Version 8 Installation Guide For SAP" Page 38.
Our Solution Manager system is running on AIX platform and Wily Enterprise Manager is on Windows 2008.
This is what we are trying
SOLMAN Production Client --> SOLMAN_WORKCENTER --> INTROSCOPE WORKSTATION --> this opens a new browser page and from there we click on Start Introscope -->
Result --> SSO doesn't work, still we get login window.
Introscope Enterprise Manager logs says -->
9/12/11 10:47:17 PM BST [WARN] [Manager] Single sign on failed: No SAP single sign on ticket was found in the request header.
Note: Another Solution Manager system in our landscape (on windows 2008 platform) is connected to same Wily Enterprise Manager (windows 2008) and from this solution manager SSO to Wily Enterprise Manager is working.
Please help me with your expertise to solve this problem.
Best Regards
Davinder

Hello Singh,
Could you check if you have maintained these parameters in instacne profile ?
From SCN post -> http://scn.sap.com/thread/969538
Hi Hector,
To configure SSO as per initial setup guide, please check your profile parameters in your Solution Manager as below:
You have set up SSO, see also:
SAP Note 817529: Checking the SSO Configuration
Installation Guide and Security Guide for SAP Solution Manager
Create the following profile parameters in the instance profile:
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = fully qualified server name
This parameter must be attributed to the fully qualified server name (for example wdfd002568.wdf.sap). The name must contain at least two periods. See also SAP Note 434918.
Hope this helps,
Regards,
-Rohan
BR,
kamil

Importing ARIS content to Solution Manager

Hi Colleagues,
I'm looking for information on posible restrictions to import ARIS content to Solution Manager.
Have anyone been through this and could share what challenges we could expect?
I found a document called "IMPORTING ARIS FOR NETWEAVER CONTENT INTO SOLUTION MANAGER" from Sukumar Natarajan but it just explain its steps.
Thanks a lot,
Renato Petrulis

Hello Renato,
To Import ARIS to Solman, you need have an install in solution manager, have a project created on tx solar_project_admin, have the ARIS Business Architect ready and follow the simple steps mentioned in the document you talked about.
Please reply for any other doubt,
Cheers,
César Aranda

Connection from Solution manager to SapNet

Hi,
I want connect from solution manager to sapnet for downloading support packages. What i need to do ?
I think that i need to:
1. official IP address for solution manager host ? Could this ip address be one in all network and routed to solution manager host ?
2. Install sap router on solution manager host ?

Hi Mindaugas,
For getting SAP Solution manager connected to SAP Net the following where mandatory
We Should have a official IP address of the computer on which SAP router can be configured. Its not necessary that you should have it in solution manager server. You can have it in any of the computer within your network and configure SAP router in that machine. This should be an official and registered IP address. You cannot use address such as
10.0.0.0 to 10.255.255.255
172.16.0.0 to 172.31.255.255
192.168.0.0 to 192.168.255.255
Later solution manager can be connected to SAP net using three RFC connections SAPOSS, SAP-OSS, SAP-OSS-LIST-O01. But before starting this make sure that you have configured SAP router correctly. Only then these RFC connections will work.
Also refer Note: 28976
regards,
Anandh

Configuration documents of CRM 2007 in Solution Manager

Hi all,
I have new version of CRM 2007 in our landscape and Solution manager as well.
So we need to get/download configuration documents of CRM 2007 by Solution manager but not sure what configuration we need to do in Solution manager to get these CRM documents.
So kindly suggest me the way to get this done, thanks.
Regards,
Himanshu chauhan.

Hi,
This link might not be sufficient but will let you know how powerful Solution Manager is.
http://www.sap.info/index.php4?ACTION=noframe&url=http://www.sap.info/public/INT/int/index/PrintEdition-17873d3e79f60eb30-int/0/articleContainer-214343d5145200a438
This link will be useful to you providing you how to create non SAP systems in your Solution Manager Landscape.
http://help.sap.com/saphelp_sm40/helpdata/en/bc/0e90000e58f64fb184a4cba0323e39/content.htm
This is one good guide for you.
www.sappro.com/downloads/NonSAPsystems.pdf
Meanwhile i will try for more indepth coverage of the subject.
Feel free to revert back.
--Ragu

CRM Content for Solution Manager

Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
Please help.
Kind Regards
Felix

>
felix chabeli wrote:
> Does anyone have an idea where i can find the CRM 7.0 Content for Solution Manager?
>
> I tried looking under: Downloads - SAP Software Distribution Center as well as Release and Upgrade Info with no luck.
Do you want to implement CRM 7.0 with the help (project, Business Blueprint, Configuration) of a SAP Solution Manager system?
If yes, you can browse through the [Available implementation content|https://implementationcontent.sap.com/bpr]
The content is shipped via add-on ST-PI and its support packages.
Relevant transactions: SOLAR_PROJECT_ADMIN, SOLAR01, SOLAR02
Regards,
Ruediger

Doubt on viewing service message reply from solution manager???

Hi,
How to view the reply(for Service Message) from solution manager in our satillite system? or how to view the reply for our service message? Please share your ideas..

Hello Sriram,
Unfortunately it is not possible to display the replies of the support
desk in any satellite system. There are to ways to inform the creator
the message:
A new action can be defined, so that a mail is sent to the creator, when
e.g. the status of the message changes. You can read in attached note
no. 691303 how to set up an action triggered by status change.
The second possibility is to set up a user in the Solution Manager
system with display authorization, then creator of the message must log
on to the Solution Manager system and can then have his messages
displayed.
At the moment there are no other possibilities for the issue described
by you.
Hope this helps,
Dolores

Monitor Systems From Solution Manager 4.0

Hi Dear Gurus,
I have recently Instaled SOLMAN 4.0 on windows with Mysql. I have configured the Maintainence optimizer and now its working fiine.
From my organization requirement they want to monitor ERP and BW systems from solution manager.
Can any one please tell me how to start regarding this.
And one more question is i am just wondering Central User Admin is different installation or we have to configure SOLMAN 4.0 to use CUA.
Many thanks for your time.
Kind Regards,
Vamsi.

Hi,
You first need to Setup landscape and create RFCs
[Data Collection|https://websmp109.sap-ag.de/~sapidb/011000358700004860052004E.sim]
[Create Systems|https://websmp109.sap-ag.de/~sapidb/011000358700000894082006E.sim]
[Create RFCs|https://websmp109.sap-ag.de/~sapidb/011000358700002912202006E.sim]
[Assign Logical Components|https://websmp109.sap-ag.de/~sapidb/011000358700002912242006E.sim]
Then Create Solution,
Then Setup Solution Monitoring
[Setup|https://websmp109.sap-ag.de/~sapidb/011000358700006936062005E.sim]
[Monitoring Graphic|https://websmp109.sap-ag.de/~sapidb/011000358700006939872005E.sim]
[Exhaustive very good tutor|https://websmp109.sap-ag.de/~sapidb/011000358700005479192006E.sim]
This will solve your problem.
Feel free to revert back.
--Ragu
Edited by: Raguraman C on Jan 16, 2008 4:31 AM

Can not send mail from Solution Manager

hi,
We try to send mail from Solution Manager workplace (SBWP). But when we try to send mail we get an error message "Address does not exist" .
Best Regards

Hi,
If you have already configured SCOT,this can be an inconsistency. Please try to run the report: 'RSSODIAD'.
I hope it helps.
Regards,
Sam

BPML from Solution Manager

Hi all,
I want to download in excel file BPML from solution manager, kindly guide me the process, can we do that from solution manager or is there any other similar thing to BPML that we can get from Solution manager.
Thanks

there isn't a true BPML in SolMan.
The closest thing you can get to it, which better in my opinion, is:
1. Go to SOLAR_EVAL
2. Under configuration select the Cross Tab analysis report
3. Select the various reports you wish to merge (I recommend transactions, config, development and testing if you have used those tabs)
4. Click execute
5. Export it to Excel
6. Enjoy!
regards,
Jason

Configure EP to display contents from Solution Manager

Similar Messages

Maybe you are looking for