Configure: error: C preprocessor "/lib/cpp" fails
I'm getting an error:
configure: error: C preprocessor "/lib/cpp" fails sanity check
For several things, mainly svn of gaim, gaim-encryption, but I haven't tried others. Any clue what this has to do with?
i tried to install sabbu and subtitleeditor with abs/aur, and both stopped at configure.
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
tried to reinstall kernel-headers-2.6.18-3 and gcc-4.1.1-3 ...no luck.
(tried to remove them from cache then reinstall...still got the error msg)
Similar Messages
-
Xnee-2.00 Installation - /lib/cpp fails sanity check
When I first tried running the configure file to start the installation process for this application, I ran into error after error and found solutions to them by installing packages off the SunOS cd's or from the sunfreeware site. But I cant find a solution to this problem.
the output when running the configure script is as follows for the problem:
checking how to run the C preprocessor... /lib/cpp
configure: error: C preprocessor "/lib/cpp" fails sanity check
the config.log file is very long and full of compile errors...many are repeats and around the part where its failing the only problem i can see is a "conftest.c" line 14: Cant find include file assert.h....
what are the packages i need for cpp to function, i have gcc-3.3.2 installed, are there others?? is there something else i'm going to run into later?? any help will be greatly appreciatedHave you try to use pkg-get
to get the binary from Sun?
If you really need to compile it by yourself, get studio first to make it easier. It will install developer package library in the box and help to resolve your dependence problem. -
Workflow configuration error - System Account connection test failed
Hi,
Has anybody faced a problem with Workflow configuration? The version we are using is 2.6.2 on Oracle database 9.2.0.5 on AIX5L. The workflow installation from 9.2.0.1 installation CDs goes through without any problem. But when the workflow configuration tool comes up it fails with the following error.
"SYSTEM account connection test failed".
The system and sys accounts are fine as verified by sqlplus. Any help is greatly appreciated.
The log file is shown below.
Workflow Configuration Assistant-AIX
WorkflowCA:
WorkflowCA: Workflow Configuration in progress...
WorkflowCA:
WorkflowCA: Screen width -2304-, screen height -1024-
WorkflowCA: Graphics User Interface mode
WorkflowCA:
WorkflowCA: Language - US
WorkflowCA:
WorkflowCA: Start testing connection, which takes less than 3 minutes.
WorkflowCA:
WorkflowCA: Account connection test for SYSTEM
WorkflowCA: SQL Thread: Thread[TstSQL,5,main]
WorkflowCA: chkSQL: true
WorkflowCA: cmdLine: /app/oracle/product/9.2.0/bin/sqlplus system/<Masked Password> @/app/oracle/product/9.2.0/wf/sql/wftstcon.sql
WorkflowCA: envVar[0]: -ORACLE_SID=rsdb-
WorkflowCA: envVar[1]: -ORACLE_HOME=/app/oracle/product/9.2.0-
WorkflowCA: envVar[2]: -WF_RESOURCES=/app/oracle/product/9.2.0/wf/res/wfus.res-
WorkflowCA: envVar[3]: -TZ=EST5EDT-
WorkflowCA: envVar[4]: -WF_NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1-
WorkflowCA: envVar[5]: -PATH=/app/oracle/product/9.2.0/bin:/app/oracle/product/9.2.0/lib:$PATH-
WorkflowCA: envVar[6]: -LD_LIBRARY_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: envVar[7]: -WF_TNS_ADMIN=/app/oracle/product/9.2.0/network/admin-
WorkflowCA: envVar[8]: -WF_SHLIB_PATH=/app/oracle/product/9.2.0/lib-
WorkflowCA: Exit Val : 126
WorkflowCA: chkSQL is alive after 1 seconds: false
WorkflowCA: SYSTEM account connection test failed.
WorkflowCA: Terminating...
Thanks,
ChethanWe had this problem on 2 machines.
On the 1st machine, we tried the local install option after a few days (Local option with no connect string) and it worked with no problems!
On the 2nd machine, we could never get it to work even after opening a tar with Oracle. Finally we did a remote install from the 1st machine into the database on the 2nd machine. During the remote install while running wfinstall on the 1st machine, we just had to choose the remote option and the database service name for the connect string.
Thanks,
Chethan -
Compiling issues: "/lib/cpp fails sanity check"
I've recently tried to compile software and have received the above error each time. The first occasion was using the port command in DarwinPorts to install GIMP 2.2.10. The second was today when I tried to configure ncurses 5.4. Following a websearch for info I discovered that perhaps my BSD Subsystem wasn't installed (seemed unlikely), and sure enough running locate stdio.h returned only a Perl file called nostdio.h. So I ran the installer package for the BSD Subsystem from the Panther Install Disc 1. However, to no avail: I still receive the same error message.
Can anyone help me with this?
12" iBook G4 800MHz Mac OS X (10.3.9) 640MB RAM, 80GB HDD, Airport Extreme
12 iBook G4 Mac OS X (10.3.9)Hi SiRGadaBout,
stdio.h is installed with the Developer Tools or more specifically, by the DevSDK.pkg installer. The DevTools are now part of the Xcode installation, which is of course optional. Did you install that?
Gary
~~~~
[Crash programs] fail because they are based on the theory that,
with nine women pregnant, you can get a baby a month.
-- Wernher von Braun -
I am a newbie in the forums, i recently installed arch x86_64 and am having a hard time building packages, i did install base-devel , gcc gcc-fortran gcc-obc..........all that stuff i also installed all the base devel stuff...like fakeroot,flex....(all the base devel stuff) but not luck, when i try 'makepkg -s' it still brings this error ---> " configure: error: C compiler cannot create executables" or sometimes --> configure: error: C++ compiler cannot create executables , i googled a bit on possible solutions, i came acroos similar post but the newbie was not using x86_64, i tried reinstalling GCC but to no avail whats the problem?
hereis my makepkg.conf details
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/curl
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Exclusive: will only run on x86_64
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe"
CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe"
LDFLAGS="-Wl,--hash-style=gnu -Wl,--as-needed"
#-- Make Flags: change this for DistCC/SMP systems
#MAKEFLAGS="-j2"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
BUILDENV=(fakeroot !distcc color !ccache)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries in STRIP_DIRS
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
OPTIONS=(strip docs libtool emptydirs zipman purge)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Directories to be searched for the strip option (if strip is specified)
STRIP_DIRS=(bin lib sbin usr/{bin,lib,sbin,local/{bin,lib,sbin}} opt/*/{bin,lib,sbin})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
EDIT by bash: use the 'code' tag!
Last edited by bray085 (2011-01-16 16:29:13)yo man sorry about that...as i said am a newbie..but i will be up and running with no time...i have double checked the config, i cant figure anything...i need your arch skills...anywayz here is my config.log details
$ ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --enable-xcb --disable-static
## Platform. ##
hostname = Muruthi
uname -m = x86_64
uname -r = 2.6.33-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/local/sbin
PATH: /usr/sbin
PATH: /sbin
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:3338: checking for gcc
configure:3354: found /usr/bin/gcc
configure:3365: result: gcc
configure:3594: checking for C compiler version
configure:3603: gcc --version >&5
gcc (GCC) 4.5.2
Copyright (C) 2010 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3614: $? = 0
configure:3603: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.2/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/src/gcc-4.5.2/configure --prefix=/usr --enable-languages=c,c++,fortran,objc,obj-c++,ada --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --enable-gnu-unique-object --enable-lto --enable-plugin --enable-gold --with-plugin-ld=ld.gold --disable-multilib --disable-libstdcxx-pch --with-system-zlib --with-ppl --with-cloog --with-cloog-include=/usr/include/cloog-ppl --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info
Thread model: posix
gcc version 4.5.2 (GCC)
configure:3614: $? = 0
configure:3603: gcc -V >&5
gcc: '-V' option must have argument
configure:3614: $? = 1
configure:3603: gcc -qversion >&5
gcc: unrecognized option '-qversion'
gcc: no input files
configure:3614: $? = 1
configure:3634: checking whether the C compiler works
configure:3656: gcc -march=x86-64 -mtune=generic -O2 -pipe -Wl,--hash-style=gnu -Wl,--as-needed conftest.c >&5
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.2/cc1: error while loading shared libraries: libmpfr.so.4: cannot open shared object file: No such file or directory
configure:3660: $? = 1
configure:3698: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "cairo"
| #define PACKAGE_TARNAME "cairo"
| #define PACKAGE_VERSION "1.10.2"
| #define PACKAGE_STRING "cairo 1.10.2"
| #define PACKAGE_BUGREPORT "http://bugs.freedesktop.org/enter_bug.cgi?product=cairo"
| #define PACKAGE_URL ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:3703: error: in `/home/irong33k/Desktop/src/cairo-1.10.2':
configure:3705: error: C compiler cannot create executables
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CCC_set=
ac_cv_env_CCC_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_CXXCPP_set=
ac_cv_env_CXXCPP_value=
ac_cv_env_CXXFLAGS_set=set
ac_cv_env_CXXFLAGS_value='-march=x86-64 -mtune=generic -O2 -pipe'
ac_cv_env_CXX_set=
ac_cv_env_CXX_value=
ac_cv_env_FONTCONFIG_CFLAGS_set=
ac_cv_env_FONTCONFIG_CFLAGS_value=
ac_cv_env_FONTCONFIG_LIBS_set=
ac_cv_env_FONTCONFIG_LIBS_value=
ac_cv_env_FREETYPE_CFLAGS_set=
ac_cv_env_FREETYPE_CFLAGS_value=
ac_cv_env_FREETYPE_LIBS_set=
ac_cv_env_FREETYPE_LIBS_value=
ac_cv_env_GOBJECT_CFLAGS_set=
ac_cv_env_GOBJECT_CFLAGS_value=
ac_cv_env_GOBJECT_LIBS_set=
ac_cv_env_GOBJECT_LIBS_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value='-Wl,--hash-style=gnu -Wl,--as-needed'
ac_cv_env_LIBRSVG_CFLAGS_set=
ac_cv_env_LIBRSVG_CFLAGS_value=
ac_cv_env_LIBRSVG_LIBS_set=
ac_cv_env_LIBRSVG_LIBS_value=
ac_cv_env_LIBSPECTRE_CFLAGS_set=
ac_cv_env_LIBSPECTRE_CFLAGS_value=
ac_cv_env_LIBSPECTRE_LIBS_set=
ac_cv_env_LIBSPECTRE_LIBS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_POPPLER_CFLAGS_set=
ac_cv_env_POPPLER_CFLAGS_value=
ac_cv_env_POPPLER_LIBS_set=
ac_cv_env_POPPLER_LIBS_value=
ac_cv_env_VALGRIND_CFLAGS_set=
ac_cv_env_VALGRIND_CFLAGS_value=
ac_cv_env_VALGRIND_LIBS_set=
ac_cv_env_VALGRIND_LIBS_value=
ac_cv_env_XMKMF_set=
ac_cv_env_XMKMF_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_directfb_CFLAGS_set=
ac_cv_env_directfb_CFLAGS_value=
ac_cv_env_directfb_LIBS_set=
ac_cv_env_directfb_LIBS_value=
ac_cv_env_drm_CFLAGS_set=
ac_cv_env_drm_CFLAGS_value=
ac_cv_env_drm_LIBS_set=
ac_cv_env_drm_LIBS_value=
ac_cv_env_drm_xr_CFLAGS_set=
ac_cv_env_drm_xr_CFLAGS_value=
ac_cv_env_drm_xr_LIBS_set=
ac_cv_env_drm_xr_LIBS_value=
ac_cv_env_egl_CFLAGS_set=
ac_cv_env_egl_CFLAGS_value=
ac_cv_env_egl_LIBS_set=
ac_cv_env_egl_LIBS_value=
ac_cv_env_gl_CFLAGS_set=
ac_cv_env_gl_CFLAGS_value=
ac_cv_env_gl_LIBS_set=
ac_cv_env_gl_LIBS_value=
ac_cv_env_glib_CFLAGS_set=
ac_cv_env_glib_CFLAGS_value=
ac_cv_env_glib_LIBS_set=
ac_cv_env_glib_LIBS_value=
ac_cv_env_gtk_CFLAGS_set=
ac_cv_env_gtk_CFLAGS_value=
ac_cv_env_gtk_LIBS_set=
ac_cv_env_gtk_LIBS_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_pixman_CFLAGS_set=
ac_cv_env_pixman_CFLAGS_value=
ac_cv_env_pixman_LIBS_set=
ac_cv_env_pixman_LIBS_value=
ac_cv_env_png_CFLAGS_set=
ac_cv_env_png_CFLAGS_value=
ac_cv_env_png_LIBS_set=
ac_cv_env_png_LIBS_value=
ac_cv_env_png_REQUIRES_set=
ac_cv_env_png_REQUIRES_value=
ac_cv_env_qt_CFLAGS_set=
ac_cv_env_qt_CFLAGS_value=
ac_cv_env_qt_LIBS_set=
ac_cv_env_qt_LIBS_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_env_xcb_CFLAGS_set=
ac_cv_env_xcb_CFLAGS_value=
ac_cv_env_xcb_LIBS_set=
ac_cv_env_xcb_LIBS_value=
ac_cv_env_xcb_drm_CFLAGS_set=
ac_cv_env_xcb_drm_CFLAGS_value=
ac_cv_env_xcb_drm_LIBS_set=
ac_cv_env_xcb_drm_LIBS_value=
ac_cv_env_xcb_shm_CFLAGS_set=
ac_cv_env_xcb_shm_CFLAGS_value=
ac_cv_env_xcb_shm_LIBS_set=
ac_cv_env_xcb_shm_LIBS_value=
ac_cv_env_xlib_CFLAGS_set=
ac_cv_env_xlib_CFLAGS_value=
ac_cv_env_xlib_LIBS_set=
ac_cv_env_xlib_LIBS_value=
ac_cv_env_xlib_xcb_CFLAGS_set=
ac_cv_env_xlib_xcb_CFLAGS_value=
ac_cv_env_xlib_xcb_LIBS_set=
ac_cv_env_xlib_xcb_LIBS_value=
ac_cv_env_xlib_xrender_CFLAGS_set=
ac_cv_env_xlib_xrender_CFLAGS_value=
ac_cv_env_xlib_xrender_LIBS_set=
ac_cv_env_xlib_xrender_LIBS_value=
ac_cv_prog_ac_ct_CC=gcc
## Output variables. ##
ACLOCAL=''
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR=''
AM_BACKSLASH=''
AM_DEFAULT_VERBOSITY=''
AR=''
AS=''
AUTOCONF=''
AUTOHEADER=''
AUTOMAKE=''
AWK=''
BFD_LIBS=''
BUILD_ANY2PPM_FALSE=''
BUILD_ANY2PPM_TRUE=''
BUILD_CXX_FALSE=''
BUILD_CXX_TRUE=''
BUILD_DRM_XR_FALSE=''
BUILD_DRM_XR_TRUE=''
BUILD_PRIVATE_GLEW_FALSE=''
BUILD_PRIVATE_GLEW_TRUE=''
BUILD_SPHINX_FALSE=''
BUILD_SPHINX_TRUE=''
BUILD_XCB_SHM_FALSE=''
BUILD_XCB_SHM_TRUE=''
BUILD_XLIB_XCB_FALSE=''
BUILD_XLIB_XCB_TRUE=''
CAIROBOILERPLATE_LIBS=''
CAIROPERF_LIBS=''
CAIRO_CAN_TEST_PDF_SURFACE_FALSE=''
CAIRO_CAN_TEST_PDF_SURFACE_TRUE=''
CAIRO_CAN_TEST_PS_SURFACE_FALSE=''
CAIRO_CAN_TEST_PS_SURFACE_TRUE=''
CAIRO_CAN_TEST_SVG_SURFACE_FALSE=''
CAIRO_CAN_TEST_SVG_SURFACE_TRUE=''
CAIRO_CAN_TEST_WIN32_PRINTING_SURFACE_FALSE=''
CAIRO_CAN_TEST_WIN32_PRINTING_SURFACE_TRUE=''
CAIRO_CFLAGS=''
CAIRO_HAS_BEOS_SURFACE_FALSE=''
CAIRO_HAS_BEOS_SURFACE_TRUE=''
CAIRO_HAS_DIRECTFB_SURFACE_FALSE=''
CAIRO_HAS_DIRECTFB_SURFACE_TRUE=''
CAIRO_HAS_DL_FALSE=''
CAIRO_HAS_DL_TRUE=''
CAIRO_HAS_DRM_SURFACE_FALSE=''
CAIRO_HAS_DRM_SURFACE_TRUE=''
CAIRO_HAS_DRM_XR_FUNCTIONS_FALSE=''
CAIRO_HAS_DRM_XR_FUNCTIONS_TRUE=''
CAIRO_HAS_EGL_FUNCTIONS_FALSE=''
CAIRO_HAS_EGL_FUNCTIONS_TRUE=''
CAIRO_HAS_FC_FONT_FALSE=''
CAIRO_HAS_FC_FONT_TRUE=''
CAIRO_HAS_FT_FONT_FALSE=''
CAIRO_HAS_FT_FONT_TRUE=''
CAIRO_HAS_GALLIUM_SURFACE_FALSE=''
CAIRO_HAS_GALLIUM_SURFACE_TRUE=''
CAIRO_HAS_GLX_FUNCTIONS_FALSE=''
CAIRO_HAS_GLX_FUNCTIONS_TRUE=''
CAIRO_HAS_GL_SURFACE_FALSE=''
CAIRO_HAS_GL_SURFACE_TRUE=''
CAIRO_HAS_GOBJECT_FUNCTIONS_FALSE=''
CAIRO_HAS_GOBJECT_FUNCTIONS_TRUE=''
CAIRO_HAS_INTERPRETER_FALSE=''
CAIRO_HAS_INTERPRETER_TRUE=''
CAIRO_HAS_LCOV_FALSE=''
CAIRO_HAS_LCOV_TRUE=''
CAIRO_HAS_MULTI_PAGE_SURFACES_FALSE=''
CAIRO_HAS_MULTI_PAGE_SURFACES_TRUE=''
CAIRO_HAS_OS2_SURFACE_FALSE=''
CAIRO_HAS_OS2_SURFACE_TRUE=''
CAIRO_HAS_PDF_SURFACE_FALSE=''
CAIRO_HAS_PDF_SURFACE_TRUE=''
CAIRO_HAS_PNG_FUNCTIONS_FALSE=''
CAIRO_HAS_PNG_FUNCTIONS_TRUE=''
CAIRO_HAS_PS_SURFACE_FALSE=''
CAIRO_HAS_PS_SURFACE_TRUE=''
CAIRO_HAS_PTHREAD_FALSE=''
CAIRO_HAS_PTHREAD_TRUE=''
CAIRO_HAS_QT_SURFACE_FALSE=''
CAIRO_HAS_QT_SURFACE_TRUE=''
CAIRO_HAS_QUARTZ_FONT_FALSE=''
CAIRO_HAS_QUARTZ_FONT_TRUE=''
CAIRO_HAS_QUARTZ_IMAGE_SURFACE_FALSE=''
CAIRO_HAS_QUARTZ_IMAGE_SURFACE_TRUE=''
CAIRO_HAS_QUARTZ_SURFACE_FALSE=''
CAIRO_HAS_QUARTZ_SURFACE_TRUE=''
CAIRO_HAS_SCRIPT_SURFACE_FALSE=''
CAIRO_HAS_SCRIPT_SURFACE_TRUE=''
CAIRO_HAS_SKIA_SURFACE_FALSE=''
CAIRO_HAS_SKIA_SURFACE_TRUE=''
CAIRO_HAS_SPECTRE_FALSE=''
CAIRO_HAS_SPECTRE_TRUE=''
CAIRO_HAS_SVG_SURFACE_FALSE=''
CAIRO_HAS_SVG_SURFACE_TRUE=''
CAIRO_HAS_SYMBOL_LOOKUP_FALSE=''
CAIRO_HAS_SYMBOL_LOOKUP_TRUE=''
CAIRO_HAS_TEE_SURFACE_FALSE=''
CAIRO_HAS_TEE_SURFACE_TRUE=''
CAIRO_HAS_TEST_SURFACES_FALSE=''
CAIRO_HAS_TEST_SURFACES_TRUE=''
CAIRO_HAS_TRACE_FALSE=''
CAIRO_HAS_TRACE_TRUE=''
CAIRO_HAS_VG_SURFACE_FALSE=''
CAIRO_HAS_VG_SURFACE_TRUE=''
CAIRO_HAS_WGL_FUNCTIONS_FALSE=''
CAIRO_HAS_WGL_FUNCTIONS_TRUE=''
CAIRO_HAS_WIN32_FONT_FALSE=''
CAIRO_HAS_WIN32_FONT_TRUE=''
CAIRO_HAS_WIN32_SURFACE_FALSE=''
CAIRO_HAS_WIN32_SURFACE_TRUE=''
CAIRO_HAS_XCB_DRM_FUNCTIONS_FALSE=''
CAIRO_HAS_XCB_DRM_FUNCTIONS_TRUE=''
CAIRO_HAS_XCB_SHM_FUNCTIONS_FALSE=''
CAIRO_HAS_XCB_SHM_FUNCTIONS_TRUE=''
CAIRO_HAS_XCB_SURFACE_FALSE=''
CAIRO_HAS_XCB_SURFACE_TRUE=''
CAIRO_HAS_XLIB_SURFACE_FALSE=''
CAIRO_HAS_XLIB_SURFACE_TRUE=''
CAIRO_HAS_XLIB_XCB_FUNCTIONS_FALSE=''
CAIRO_HAS_XLIB_XCB_FUNCTIONS_TRUE=''
CAIRO_HAS_XLIB_XRENDER_SURFACE_FALSE=''
CAIRO_HAS_XLIB_XRENDER_SURFACE_TRUE=''
CAIRO_HAS_XML_SURFACE_FALSE=''
CAIRO_HAS_XML_SURFACE_TRUE=''
CAIRO_LDFLAGS=''
CAIRO_LIBS=''
CAIRO_LIBTOOL_VERSION_INFO=''
CAIRO_NONPKGCONFIG_CFLAGS=''
CAIRO_NONPKGCONFIG_LIBS=''
CAIRO_RELEASE_STATUS=''
CAIRO_REQUIRES=''
CAIRO_TEST_MODE=''
CAIRO_TEST_UNDEFINED_LDFLAGS=''
CAIRO_VERSION_MAJOR=''
CAIRO_VERSION_MICRO=''
CAIRO_VERSION_MINOR=''
CAIRO_VERSION_SONUM=''
CC='gcc'
CCDEPMODE=''
CFLAGS='-march=x86-64 -mtune=generic -O2 -pipe'
CPP=''
CPPFLAGS=''
CROSS_COMPILING_FALSE=''
CROSS_COMPILING_TRUE=''
CXX=''
CXXCPP=''
CXXDEPMODE=''
CXXFLAGS='-march=x86-64 -mtune=generic -O2 -pipe'
CYGPATH_W=''
DEFS=''
DEPDIR=''
DISABLE_SOME_FLOATING_POINT_FALSE=''
DISABLE_SOME_FLOATING_POINT_TRUE=''
DLLTOOL=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_GTK_DOC_FALSE=''
ENABLE_GTK_DOC_TRUE=''
EXEEXT=''
FGREP=''
FIND=''
FONTCONFIG_CFLAGS=''
FONTCONFIG_LIBS=''
FREETYPE_CFLAGS=''
FREETYPE_CONFIG=''
FREETYPE_LIBS=''
GOBJECT_CFLAGS=''
GOBJECT_LIBS=''
GREP=''
GS=''
GTKDOC_CHECK=''
GTK_DOC_USE_LIBTOOL_FALSE=''
GTK_DOC_USE_LIBTOOL_TRUE=''
HAVE_GTK_FALSE=''
HAVE_GTK_TRUE=''
HAVE_PTHREAD_FALSE=''
HAVE_PTHREAD_TRUE=''
HAVE_REAL_PTHREAD_FALSE=''
HAVE_REAL_PTHREAD_TRUE=''
HAVE_SHM_FALSE=''
HAVE_SHM_TRUE=''
HTML_DIR=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
INSTALL_STRIP_PROGRAM=''
LD=''
LDFLAGS='-Wl,--hash-style=gnu -Wl,--as-needed'
LIBM=''
LIBOBJS=''
LIBRSVG_CFLAGS=''
LIBRSVG_LIBS=''
LIBS=''
LIBSPECTRE_CFLAGS=''
LIBSPECTRE_LIBS=''
LIBTOOL=''
LIPO=''
LN_S=''
LTLIBOBJS=''
LTP=''
LTP_GENHTML=''
MAKEINFO=''
MKDIR_P=''
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OS_WIN32_FALSE=''
OS_WIN32_TRUE=''
OTOOL64=''
OTOOL=''
PACKAGE=''
PACKAGE_BUGREPORT='http://bugs.freedesktop.org/enter_bug.cgi?product=cairo'
PACKAGE_NAME='cairo'
PACKAGE_STRING='cairo 1.10.2'
PACKAGE_TARNAME='cairo'
PACKAGE_URL=''
PACKAGE_VERSION='1.10.2'
PATH_SEPARATOR=':'
PKGCONFIG_REQUIRES=''
PKG_CONFIG=''
POPPLER_CFLAGS=''
POPPLER_LIBS=''
RANLIB=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
SHLIB_EXT=''
SHM_LIBS=''
SHTOOL=''
STRIP=''
VALGRIND_CFLAGS=''
VALGRIND_LIBS=''
VERSION=''
XARGS=''
XMKMF=''
X_CFLAGS=''
X_EXTRA_LIBS=''
X_LIBS=''
X_PRE_LIBS=''
ac_ct_CC='gcc'
ac_ct_CXX=''
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE=''
am__fastdepCXX_TRUE=''
am__include=''
am__isrc=''
am__leading_dot=''
am__quote=''
am__tar=''
am__untar=''
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
directfb_CFLAGS=''
directfb_LIBS=''
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
drm_CFLAGS=''
drm_LIBS=''
drm_xr_CFLAGS=''
drm_xr_LIBS=''
dvidir='${docdir}'
egl_CFLAGS=''
egl_LIBS=''
exec_prefix='NONE'
gallium_DIR=''
gl_CFLAGS=''
gl_LIBS=''
glib_CFLAGS=''
glib_LIBS=''
gtk_CFLAGS=''
gtk_LIBS=''
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh=''
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='/var'
lt_ECHO='echo'
mandir='${datarootdir}/man'
mesa_DIR=''
mkdir_p=''
oldincludedir='/usr/include'
pdfdir='${docdir}'
pixman_CFLAGS=''
pixman_LIBS=''
png_CFLAGS=''
png_LIBS=''
png_REQUIRES=''
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
pthread_CFLAGS=''
pthread_LIBS=''
qt_CFLAGS=''
qt_LIBS=''
real_pthread_CFLAGS=''
real_pthread_LIBS=''
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
shm_LIBS=''
skia_DIR=''
sysconfdir='/etc'
target_alias=''
xcb_CFLAGS=''
xcb_LIBS=''
xcb_drm_CFLAGS=''
xcb_drm_LIBS=''
xcb_shm_CFLAGS=''
xcb_shm_LIBS=''
xlib_CFLAGS=''
xlib_LIBS=''
xlib_xcb_CFLAGS=''
xlib_xcb_LIBS=''
xlib_xrender_CFLAGS=''
xlib_xrender_LIBS=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "cairo"
#define PACKAGE_TARNAME "cairo"
#define PACKAGE_VERSION "1.10.2"
#define PACKAGE_STRING "cairo 1.10.2"
#define PACKAGE_BUGREPORT "http://bugs.freedesktop.org/enter_bug.cgi?product=cairo"
#define PACKAGE_URL ""
configure: exit 77 -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
NWDI for the 04s preview fails with 'SLD name-server configuration error'
After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan -
I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvoHi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu -
Hi,
I am getting Below error in RHEL 6.5
EPM Configurator Error "Failed to navigate from RegistryWizardState: Error while initializing registry. See logs for more details" while configuring Essbase Server on 64 bit OS using Oracle Database
Any help...?Hi ,
This community is to discuss Oracle Application Server specific issues, you can post this query in the below Hyperion Forms for better response:
Hyperion EPM
[OR]
Oracle Hyperion EPM (MOSC)
[OR]
Hyperion Certification for EPM (MOSC)
Regards,
Prakash. -
Hello
I don't have graphic acceleration in my Dell INSPEIRON 6400 laptop.
I try this:
http://wiki.archlinux.org/index.php/Intel_GMA_945
except the 915resolution and then I still didn't have acceleration.
$ LIBGL_DEBUG=verbose glxinfo
name of display: :0.0
libGL: XF86DRIGetClientDriverName: 1.7.4 i915 (screen 0)
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri//i915_dri.so
libGL error: dlopen /usr/lib/xorg/modules/dri//i915_dri.so failed (/usr/lib/xorg/modules/dri//i915_dri.so: undefined symbol: _glapi_tls_Context)
libGL error: unable to load driver: i915_dri.so
display: :0 screen: 0
Full log include lspci:
http://www.shorttext.com/n0u6r
thanks for your help
Nadavbyte wrote:Did you run pacman -Syu lately? What are your package versions? pacman -Q xf86-video-intel xorg-server
$ pacman -Q xf86-video-intel xorg-server
xf86-video-intel 2.1.1-2
xorg-server 1.4-5
$ sudo p -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
local database is up to date
Last edited by nadavvin (2007-11-18 17:34:18) -
When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forum.
Regards. -
I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed.
The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."
Is there a way to get the Apple Configurator to try to re-download iOS 8?Apple Support had me delete the image file from the following location:
~/Library/Containers/com.apple.configurator/Data/Library/Caches/com.apple.confi gurator/firmware/
The file name was iPad3,4_8.0_12A365_Restore.ipsw
I deleted this file and ran the prepare again and it download the iOS 8 ok and successfully prepared the iPad. -
Qt... configure: error
Hi,
When I'm trying to install theme, decorations or program, who's using Qt engine, I'm getting this error:
Qt... configure: error: Qt (>= Qt 3.3 and < 4.0) (headers and libraries) not found. Please check your installation!
I'm using KDE.
ThanksCan you tell me where to add this lines. Here is configure file:
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.61.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## M4sh Initialization. ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in
*posix*) set -o posix ;;
esac
fi
# PATH needs CR
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
echo "#! /bin/sh" >conf$$.sh
echo "exit 0" >>conf$$.sh
chmod +x conf$$.sh
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
rm -f conf$$.sh
fi
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
as_unset=unset
else
as_unset=false
fi
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
as_nl='
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
case $0 in
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
{ (exit 1); exit 1; }
fi
# Work around bugs in pre-3.0 UWIN ksh.
for as_var in ENV MAIL MAILPATH
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
for as_var in \
LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
LC_TELEPHONE LC_TIME
do
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
fi
done
# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
/^X\/\(\/\/\)$/{
s//\1/
q
/^X\/\(\/\).*/{
s//\1/
q
s/.*/./; q'`
# CDPATH.
$as_unset CDPATH
if test "x$CONFIG_SHELL" = x; then
if (eval ":") 2>/dev/null; then
as_have_required=yes
else
as_have_required=no
fi
if test $as_have_required = yes && (eval ":
(as_func_return () {
(exit \$1)
as_func_success () {
as_func_return 0
as_func_failure () {
as_func_return 1
as_func_ret_success () {
return 0
as_func_ret_failure () {
return 1
exitcode=0
if as_func_success; then
else
exitcode=1
echo as_func_success failed.
fi
if as_func_failure; then
exitcode=1
echo as_func_failure succeeded.
fi
if as_func_ret_success; then
else
exitcode=1
echo as_func_ret_success failed.
fi
if as_func_ret_failure; then
exitcode=1
echo as_func_ret_failure succeeded.
fi
if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
else
exitcode=1
echo positional parameters were not saved.
fi
test \$exitcode = 0) || { (exit 1); exit 1; }
as_lineno_1=\$LINENO
as_lineno_2=\$LINENO
test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
") 2> /dev/null; then
else
as_candidate_shells=
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
case $as_dir in
for as_base in sh bash ksh sh5; do
as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
done;;
esac
done
IFS=$as_save_IFS
for as_shell in $as_candidate_shells $SHELL; do
# Try only shells that exist, to save several forks.
if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
{ ("$as_shell") 2> /dev/null <<\_ASEOF
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in
*posix*) set -o posix ;;
esac
fi
_ASEOF
}; then
CONFIG_SHELL=$as_shell
as_have_required=yes
if { "$as_shell" 2> /dev/null <<\_ASEOF
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in
*posix*) set -o posix ;;
esac
fi
(as_func_return () {
(exit $1)
as_func_success () {
as_func_return 0
as_func_failure () {
as_func_return 1
as_func_ret_success () {
return 0
as_func_ret_failure () {
return 1
exitcode=0
if as_func_success; then
else
exitcode=1
echo as_func_success failed.
fi
if as_func_failure; then
exitcode=1
echo as_func_failure succeeded.
fi
if as_func_ret_success; then
else
exitcode=1
echo as_func_ret_success failed.
fi
if as_func_ret_failure; then
exitcode=1
echo as_func_ret_failure succeeded.
fi
if ( set x; as_func_ret_success y && test x = "$1" ); then
else
exitcode=1
echo positional parameters were not saved.
fi
test $exitcode = 0) || { (exit 1); exit 1; }
as_lineno_1=$LINENO
as_lineno_2=$LINENO
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
_ASEOF
}; then
break
fi
fi
done
if test "x$CONFIG_SHELL" != x; then
for as_var in BASH_ENV ENV
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
export CONFIG_SHELL
exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
fi
if test $as_have_required = no; then
echo This script requires a shell more modern than all the
echo shells that I found on your system. Please install a
echo modern shell, or manually run the script under such a
echo shell if you do have one.
{ (exit 1); exit 1; }
fi
fi
fi
(eval "as_func_return () {
(exit \$1)
as_func_success () {
as_func_return 0
as_func_failure () {
as_func_return 1
as_func_ret_success () {
return 0
as_func_ret_failure () {
return 1
exitcode=0
if as_func_success; then
else
exitcode=1
echo as_func_success failed.
fi
if as_func_failure; then
exitcode=1
echo as_func_failure succeeded.
fi
if as_func_ret_success; then
else
exitcode=1
echo as_func_ret_success failed.
fi
if as_func_ret_failure; then
exitcode=1
echo as_func_ret_failure succeeded.
fi
if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
else
exitcode=1
echo positional parameters were not saved.
fi
test \$exitcode = 0") || {
echo No shell found that supports shell functions.
echo Please tell [email protected] about your system,
echo including any error possibly output before this
echo message
as_lineno_1=$LINENO
as_lineno_2=$LINENO
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO
# uniformly replaced by the line number. The first 'sed' inserts a
# line-number line after each line using $LINENO; the second 'sed'
# does the real work. The second script uses 'N' to pair each
# line-number line with the line containing $LINENO, and appends
# trailing '-' during substitution so that $LINENO is not a special
# case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
# scripts with optimization help from Paolo Bonzini. Blame Lee
# E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
' <$as_myself |
sed '
s/[$]LINENO.*/&-/
t lineno
b
:lineno
N
:loop
s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
{ echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
. "./$as_me.lineno"
# Exit status is that of the last command.
exit
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in
-n*)
case `echo 'x\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
*) ECHO_C='\c';;
esac;;
ECHO_N='-n';;
esac
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir
fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -p'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
if test -x / >/dev/null 2>&1; then
as_test_x='test -x'
else
if ls -dL / >/dev/null 2>&1; then
as_ls_L_option=L
else
as_ls_L_option=
fi
as_test_x='
eval sh -c '\''
if test -d "$1"; then
test -d "$1/.";
else
case $1 in
-*)set "./$1";;
esac;
case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
???[sx]*):;;*)false;;esac;fi
'\'' sh
fi
as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
case X$ECHO in
X*--fallback-echo)
# Remove one level of quotation (which was required for Make).
ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
esac
echo=${ECHO-echo}
if test "X$1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test "X$1" = X--fallback-echo; then
# Avoid inline document here, it may be left over
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
# Yippee, $echo works!
else
# Restart under the correct shell.
exec $SHELL "$0" --no-reexec ${1+"$@"}
fi
if test "X$1" = X--fallback-echo; then
# used as fallback echo
shift
cat <<EOF
$*
EOF
exit 0
fi
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
if test -z "$ECHO"; then
if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
# expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
if (echo_test_string="`eval $cmd`") 2>/dev/null &&
echo_test_string="`eval $cmd`" &&
(test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
then
break
fi
done
fi
if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
else
# The Solaris, AIX, and Digital Unix default echo programs unquote
# backslashes. This makes it impossible to quote backslashes using
# echo "$something" | sed 's/\\/\\\\/g'
# So, first we look for a working echo in the user's PATH.
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for dir in $PATH /usr/ucb; do
IFS="$lt_save_ifs"
if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
echo="$dir/echo"
break
fi
done
IFS="$lt_save_ifs"
if test "X$echo" = Xecho; then
# We didn't find a better echo, so look for alternatives.
if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
# This shell has a builtin print -r that does the trick.
echo='print -r'
elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
test "X$CONFIG_SHELL" != X/bin/ksh; then
# If we have ksh, try running configure again with it.
ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
export ORIGINAL_CONFIG_SHELL
CONFIG_SHELL=/bin/ksh
export CONFIG_SHELL
exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
else
# Try using printf.
echo='printf %s\n'
if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
# Cool, printf works
elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
test "X$echo_testing_string" = 'X\t' &&
echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
export CONFIG_SHELL
SHELL="$CONFIG_SHELL"
export SHELL
echo="$CONFIG_SHELL $0 --fallback-echo"
elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
test "X$echo_testing_string" = 'X\t' &&
echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
echo="$CONFIG_SHELL $0 --fallback-echo"
else
# maybe with a smaller string...
prev=:
for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
then
break
fi
prev="$cmd"
done
if test "$prev" != 'sed 50q "$0"'; then
echo_test_string=`eval $prev`
export echo_test_string
exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
else
# Oops. We lost completely, so just stick with echo.
echo=echo
fi
fi
fi
fi
fi
fi
# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
ECHO=$echo
if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
fi
tagnames=${tagnames+${tagnames},}CXX
tagnames=${tagnames+${tagnames},}F77
exec 7<&0 </dev/null 6>&1
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
# Initializations.
ac_default_prefix=/usr/local
ac_clean_files=
ac_config_libobj_dir=.
LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Identity of this package.
PACKAGE_NAME=
PACKAGE_TARNAME=
PACKAGE_VERSION=
PACKAGE_STRING=
PACKAGE_BUGREPORT=
ac_unique_file="acinclude.m4"
ac_default_prefix=${KDEDIR:-the kde prefix}
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
#ifdef HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
#ifdef STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
# ifdef HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif
#ifdef HAVE_STRING_H
# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
# include <memory.h>
# endif
# include <string.h>
#endif
#ifdef HAVE_STRINGS_H
# include <strings.h>
#endif
#ifdef HAVE_INTTYPES_H
# include <inttypes.h>
#endif
#ifdef HAVE_STDINT_H
# include <stdint.h>
#endif
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif"
ac_subst_vars='SHELL
PATH_SEPARATOR
PACKAGE_NAME
PACKAGE_TARNAME
PACKAGE_VERSION
PACKAGE_STRING
PACKAGE_BUGREPORT
exec_prefix
prefix
program_transform_name
bindir
sbindir
libexecdir
datarootdir
datadir
sysconfdir
sharedstatedir
localstatedir
includedir
oldincludedir
docdir
infodir
htmldir
dvidir
pdfdir
psdir
libdir
localedir
mandir
DEFS
ECHO_C
ECHO_N
ECHO_T
LIBS
build_alias
host_alias
target_alias
build
build_cpu
build_vendor
build_os
host
host_cpu
host_vendor
host_os
target
target_cpu
target_vendor
target_os
INSTALL_PROGRAM
INSTALL_SCRIPT
INSTALL_DATA
CYGPATH_W
PACKAGE
VERSION
ACLOCAL
AUTOCONF
AUTOMAKE
AUTOHEADER
MAKEINFO
AMTAR
install_sh
STRIP
INSTALL_STRIP_PROGRAM
AWK
SET_MAKE
am__leading_dot
KDECONFIG
kde_libs_prefix
kde_libs_htmldir
CONF_FILES
CC
CFLAGS
LDFLAGS
CPPFLAGS
ac_ct_CC
EXEEXT
OBJEXT
DEPDIR
am__include
am__quote
AMDEP_TRUE
AMDEP_FALSE
AMDEPBACKSLASH
CCDEPMODE
am__fastdepCC_TRUE
am__fastdepCC_FALSE
CPP
CXX
CXXFLAGS
ac_ct_CXX
CXXDEPMODE
am__fastdepCXX_TRUE
am__fastdepCXX_FALSE
WOVERLOADED_VIRTUAL
HAVE_GCC_VISIBILITY
unsermake_enable_pch_TRUE
unsermake_enable_pch_FALSE
USE_EXCEPTIONS
USE_RTTI
CXXCPP
NOOPT_CXXFLAGS
NOOPT_CFLAGS
ENABLE_PERMISSIVE_FLAG
LDFLAGS_AS_NEEDED
LDFLAGS_NEW_DTAGS
KDE_USE_FINAL_TRUE
KDE_USE_FINAL_FALSE
KDE_USE_CLOSURE_TRUE
KDE_USE_CLOSURE_FALSE
KDE_NO_UNDEFINED
KDE_USE_NMCHECK_TRUE
KDE_USE_NMCHECK_FALSE
GREP
EGREP
LN_S
ECHO
AR
RANLIB
F77
FFLAGS
ac_ct_F77
LIBTOOL
KDE_PLUGIN
KDE_CHECK_PLUGIN
MSGFMT
GMSGFMT
XGETTEXT
LIBUTIL
LIBCOMPAT
LIBCRYPT
LIBRESOLV
LIB_POLL
FRAMEWORK_COREAUDIO
LIBSOCKET
X_EXTRA_LIBS
LIBUCB
LIBDL
KDE_USE_FPIE
KDE_USE_PIE
include_x11_TRUE
include_x11_FALSE
XMKMF
X_PRE_LIBS
LIB_X11
LIB_XRENDER
LIBSM
X_INCLUDES
X_LDFLAGS
x_includes
x_libraries
QTE_NORTTI
LIB_XEXT
LIBPTHREAD
USE_THREADS
KDE_MT_LDFLAGS
KDE_MT_LIBS
USER_INCLUDES
USER_LDFLAGS
LIBZ
LIBPNG
LIBJPEG
qt_libraries
qt_includes
QT_INCLUDES
QT_LDFLAGS
PERL
MOC
UIC
UIC_TR
LIB_QT
LIB_QPE
kde_qtver
KDE_EXTRA_RPATH
KDE_RPATH
X_RPATH
kde_libraries
kde_includes
KDE_LDFLAGS
KDE_INCLUDES
all_includes
all_libraries
AUTODIRS
include_ARTS_TRUE
include_ARTS_FALSE
MAKEKDEWIDGETS
KCONFIG_COMPILER
KCFG_DEPENDENCIES
DCOPIDLNG
DCOPIDL
DCOPIDL2CPP
DCOP_DEPENDENCIES
MCOPIDL
ARTSCCONFIG
MEINPROC
KDE_XSL_STYLESHEET
XMLLINT
kde_htmldir
kde_appsdir
kde_icondir
kde_sounddir
kde_datadir
kde_locale
kde_confdir
kde_kcfgdir
kde_mimedir
kde_wallpaperdir
kde_bindir
xdg_appsdir
xdg_menudir
xdg_directorydir
kde_templatesdir
kde_servicesdir
kde_servicetypesdir
kde_moduledir
kdeinitdir
kde_styledir
kde_widgetdir
LIB_KDED
LIB_KDECORE
LIB_KDEUI
LIB_KIO
LIB_KJS
LIB_SMB
LIB_KAB
LIB_KABC
LIB_KHTML
LIB_KSPELL
LIB_KPARTS
LIB_KDEPRINT
LIB_KUTILS
LIB_KDEPIM
LIB_KIMPROXY
LIB_KNEWSTUFF
LIB_KDNSSD
LIB_KUNITTEST
LIB_KSYCOCA
LIB_KFILE
LIB_KFM
TOPSUBDIRS
LIBOBJS
LTLIBOBJS'
ac_subst_files=''
ac_precious_vars='build_alias
host_alias
target_alias
CC
CFLAGS
LDFLAGS
LIBS
CPPFLAGS
CPP
CXX
CXXFLAGS
CCC
CXXCPP
F77
FFLAGS
XMKMF'
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
exec_prefix=NONE
no_create=
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
verbose=
x_includes=NONE
x_libraries=NONE
# Installation directory options.
# These are left unexpanded so users can "make install exec_prefix=/foo"
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datarootdir='${prefix}/share'
datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
includedir='${prefix}/include'
oldincludedir='/usr/include'
docdir='${datarootdir}/doc/${PACKAGE}'
infodir='${datarootdir}/info'
htmldir='${docdir}'
dvidir='${docdir}'
pdfdir='${docdir}'
psdir='${docdir}'
libdir='${exec_prefix}/lib'
localedir='${datarootdir}/locale'
mandir='${datarootdir}/man'
ac_prev=
ac_dashdash=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval $ac_prev=\$ac_option
ac_prev=
continue
fi
case $ac_option in
*=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
*) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
case $ac_dashdash$ac_option in
ac_dashdash=yes ;;
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir=$ac_optarg ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build_alias ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build_alias=$ac_optarg ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file=$ac_optarg ;;
--config-cache | -C)
cache_file=config.cache ;;
-datadir | --datadir | --datadi | --datad)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=*)
datadir=$ac_optarg ;;
-datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
| --dataroo | --dataro | --datar)
ac_prev=datarootdir ;;
-datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
| --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
datarootdir=$ac_optarg ;;
-disable-* | --disable-*)
ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
eval enable_$ac_feature=no ;;
-docdir | --docdir | --docdi | --doc | --do)
ac_prev=docdir ;;
-docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
docdir=$ac_optarg ;;
-dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
ac_prev=dvidir ;;
-dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
dvidir=$ac_optarg ;;
-enable-* | --enable-*)
ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
eval enable_$ac_feature=\$ac_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix=$ac_optarg ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he | -h)
ac_init_help=long ;;
-help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
ac_init_help=recursive ;;
-help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
ac_init_help=short ;;
-host | --host | --hos | --ho)
ac_prev=host_alias ;;
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
-htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
ac_prev=htmldir ;;
-htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
| --ht=*)
htmldir=$ac_optarg ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir=$ac_optarg ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir=$ac_optarg ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir=$ac_optarg ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
-localedir | --localedir | --localedi | --localed | --locale)
ac_prev=localedir ;;
-localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
localedir=$ac_optarg ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst | --locals)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir=$ac_optarg ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c | -n)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir=$ac_optarg ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix=$ac_optarg ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix=$ac_optarg ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix=$ac_optarg ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
-pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
ac_prev=pdfdir ;;
-pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
pdfdir=$ac_optarg ;;
-psdir | --psdir | --psdi | --psd | --ps)
ac_prev=psdir ;;
-psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
psdir=$ac_optarg ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir=$ac_optarg ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir=$ac_optarg ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site=$ac_optarg ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=$ac_optarg ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir=$ac_optarg ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target_alias ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target_alias=$ac_optarg ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers | -V)
ac_init_version=: ;;
-with-* | --with-*)
ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
eval with_$ac_package=\$ac_optarg ;;
-without-* | --without-*)
ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
eval with_$ac_package=no ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes=$ac_optarg ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
-*) { echo "$as_me: error: unrecognized option: $ac_option
Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; }
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid variable name: $ac_envvar" >&2
{ (exit 1); exit 1; }; }
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
# FIXME: should be removed in autoconf 3.0.
echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
echo "$as_me: WARNING: invalid host type: $ac_option" >&2
: ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
esac
done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
{ echo "$as_me: error: missing argument to $ac_option" >&2
{ (exit 1); exit 1; }; }
fi
# Be sure to have absolute directory names.
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
datadir sysconfdir sharedstatedir localstatedir includedir \
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
libdir localedir mandir
do
eval ac_val=\$$ac_var
case $ac_val in
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
{ echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
{ (exit 1); exit 1; }; }
done
# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
# FIXME: To remove some day.
build=$build_alias
host=$host_alias
target=$target_alias
# FIXME: To remove some day.
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
fi
ac_tool_prefix=
test -n "$host_alias" && ac_tool_prefix=$host_alias-
test "$silent" = yes && exec 6>/dev/null
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
{ echo "$as_me: error: Working directory cannot be determined" >&2
{ (exit 1); exit 1; }; }
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
{ echo "$as_me: error: pwd does not report name of working directory" >&2
{ (exit 1); exit 1; }; }
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then the parent directory.
ac_confdir=`$as_dirname -- "$0" ||
$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$0" : 'X\(//\)[^/]' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$0" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
/^X\(\/\/\)[^/].*/{
s//\1/
q
/^X\(\/\/\)$/{
s//\1/
q
/^X\(\/\).*/{
s//\1/
q
s/.*/./; q'`
srcdir=$ac_confdir
if test ! -r "$srcdir/$ac_unique_file"; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
{ echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
{ (exit 1); exit 1; }; }
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
{ (exit 1); exit 1; }; }
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
srcdir=.
fi
# Remove unnecessary trailing slashes from srcdir.
# Double slashes in file names in object file debugging info
# mess up M-x gdb in Emacs.
case $srcdir in
*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
esac
for ac_var in $ac_precious_vars; do
eval ac_env_${ac_var}_set=\${${ac_var}+set}
eval ac_env_${ac_var}_value=\$${ac_var}
eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
eval ac_cv_env_${ac_var}_value=\$${ac_var}
done
# Report the --help message.
if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
\`configure' configures this package to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print \`checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
_ACEOF
cat <<\_ACEOF
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
--target=TARGET configure for building compilers for TARGET [HOST]
_ACEOF
fi
if test -n "$ac_init_help"; then
cat <<\_ACEOF
Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--disable-fast-perl disable fast Makefile generation (needs perl)
--enable-debug=ARG enables debug symbols (yes|no|full) default=no
--disable-debug disables debug output and debug symbols default=no
--enable-strict compiles with strict compiler options (may not
work!)
--disable-warnings disables compilation with -Wall and similar
--enable-profile creates profiling infos default=no
--disable-dependency-tracking Speeds up one-time builds
--enable-dependency-tracking Do not reject slow dependency extractors
--enable-pch enables precompiled header support (currently only
KCC or gcc >=3.4+unsermake) default=no
--enable-coverage use gcc coverage testing
--enable-new-ldflags enable the new linker flags
--enable-final build size optimized apps (experimental - needs lots
of memory)
--enable-closure delay template instantiation
--enable-nmcheck enable automatic namespace cleanness check
--enable-shared[=PKGS] build shared libraries [default=yes]
--enable-static[=PKGS] build static libraries [default=no]
--enable-libsuffix /lib directory suffix (64,32,none,auto=default)
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-pie platform supports PIE linking default=detect
--enable-embedded link to Qt-embedded, don't use X
--enable-qtopia link to Qt-embedded, link to the Qtopia Environment
--enable-mac link to Qt/Mac (don't use X)
--disable-mt link to non-threaded Qt (deprecated)
--disable-threading disables threading even if libpthread found
--disable-rpath do not use the rpath feature of ld
--disable-path-check don't try to find out, where to install
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-tags[=TAGS] include additional configurations [automatic]
--with-extra-includes=DIR
adds non standard include paths
--with-extra-libs=DIR adds non standard library paths
--with-qt-dir=DIR where the root of Qt is installed
--with-qt-includes=DIR where the Qt includes are.
--with-qt-libraries=DIR where the Qt library is installed.
--without-arts build without aRts default=no
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CXXCPP C++ preprocessor
F77 Fortran 77 compiler command
FFLAGS Fortran 77 compiler flags
XMKMF Path to xmkmf, Makefile generator for X Window System
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
_ACEOF
ac_status=$?
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
test -d "$ac_dir" || continue
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A ".." for each directory in $ac_dir_suffix.
ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix
case $srcdir in
.) # We are building in place.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
cd "$ac_dir" || { ac_status=$?; continue; }
# Check for guested configure.
if test -f "$ac_srcdir/configure.gnu"; then
echo &&
$SHELL "$ac_srcdir/configure.gnu" --help=recursive
elif test -f "$ac_srcdir/configure"; then
echo &&
$SHELL "$ac_srcdir/configure" --help=recursive
else
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
fi || ac_status=$?
cd "$ac_pwd" || { ac_status=$?; break; }
done
fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
configure
generated by GNU Autoconf 2.61
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
exit
fi
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ $0 $@
_ACEOF
exec 5>>config.log
cat <<_ASUNAME
## Platform. ##
hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null | -
[SOLVED] configure: error: cannot run C compiled programs
I'm trying to build lib32-libxkbcommon 0.5.0-1 from AUR with makepkg. I already tried installing pacman (setting the default makepkg.conf) and multilib-devel with no luck.
makepkg messages:
==> Making package: lib32-libxkbcommon 0.5.0-1 (Mon May 11 00:17:05 EEST 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found libxkbcommon-0.5.0.tar.xz
==> Validating source files with sha256sums...
libxkbcommon-0.5.0.tar.xz ... Passed
==> Extracting sources...
-> Extracting libxkbcommon-0.5.0.tar.xz with bsdtar
bsdtar: Failed to set default locale
==> Starting prepare()...
==> Removing existing $pkgdir/ directory...
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc -m32
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
#-- The package required by makepkg to download VCS sources
# Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
'git::git'
'hg::mercurial'
'svn::subversion')
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(!distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libxkbcommon configure 0.5.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --disable-docs --disable-static
## Platform. ##
hostname = Arch
uname -m = x86_64
uname -r = 4.0.1-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/lib/jvm/default/bin
PATH: /usr/bin/site_perl
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:2424: checking for a BSD-compatible install
configure:2492: result: /usr/bin/install -c
configure:2503: checking whether build environment is sane
configure:2558: result: yes
configure:2709: checking for a thread-safe mkdir -p
configure:2748: result: /usr/bin/mkdir -p
configure:2755: checking for gawk
configure:2771: found /usr/bin/gawk
configure:2782: result: gawk
configure:2793: checking whether make sets $(MAKE)
configure:2815: result: yes
configure:2844: checking whether make supports nested variables
configure:2861: result: yes
configure:2987: checking whether to enable maintainer-specific portions of Makefiles
configure:2996: result: yes
configure:3023: checking for style of include used by make
configure:3051: result: GNU
configure:3122: checking for gcc
configure:3149: result: gcc -m32
configure:3378: checking for C compiler version
configure:3387: gcc -m32 --version >&5
gcc (GCC) 5.1.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3398: $? = 0
configure:3387: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/5.1.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/gcc-multilib/src/gcc-5-20150505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --with-default-libstdcxx-abi=c++98
Thread model: posix
gcc version 5.1.0 (GCC)
configure:3398: $? = 0
configure:3387: gcc -m32 -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3387: gcc -m32 -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3418: checking whether the C compiler works
configure:3440: gcc -m32 -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3444: $? = 0
configure:3492: result: yes
configure:3495: checking for C compiler default output file name
configure:3497: result: a.out
configure:3503: checking for suffix of executables
configure:3510: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3514: $? = 0
configure:3536: result:
configure:3558: checking whether we are cross compiling
configure:3566: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
In file included from /usr/include/stdio.h:27:0,
from conftest.c:11:
/usr/include/features.h:365:25: fatal error: sys/cdefs.h: No such file or directory
compilation terminated.
configure:3570: $? = 1
configure:3577: ./conftest
./configure: line 3579: ./conftest: No such file or directory
configure:3581: $? = 127
configure:3588: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure:3590: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOT_set=
ac_cv_env_DOT_value=
ac_cv_env_DOXYGEN_set=
ac_cv_env_DOXYGEN_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=set
ac_cv_env_PKG_CONFIG_PATH_value=/usr/lib32/pkgconfig
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_XCB_XKB_CFLAGS_set=
ac_cv_env_XCB_XKB_CFLAGS_value=
ac_cv_env_XCB_XKB_LIBS_set=
ac_cv_env_XCB_XKB_LIBS_value=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_set=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes
## Output variables. ##
ACLOCAL='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing aclocal-1.14'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR=''
AUTOCONF='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoconf'
AUTOHEADER='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoheader'
AUTOMAKE='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing automake-1.14'
AWK='gawk'
BASE_CFLAGS=''
BUILD_LINUX_TESTS_FALSE=''
BUILD_LINUX_TESTS_TRUE=''
CC='gcc -m32'
CCDEPMODE=''
CFLAGS='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
CHANGELOG_CMD=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CWARNFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DOT=''
DOXYGEN=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DOCS_FALSE=''
ENABLE_DOCS_TRUE=''
ENABLE_X11_FALSE=''
ENABLE_X11_TRUE=''
EXEEXT=''
FGREP=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP=''
HAVE_DOT=''
HAVE_DOT_FALSE=''
HAVE_DOT_TRUE=''
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE=''
HAVE_NO_UNDEFINED_FALSE=''
HAVE_NO_UNDEFINED_TRUE=''
INSTALL_CMD=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing makeinfo'
MANIFEST_TOOL=''
MAN_SUBSTS=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/usr/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='libxkbcommon'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon'
PACKAGE_NAME='libxkbcommon'
PACKAGE_STRING='libxkbcommon 0.5.0'
PACKAGE_TARNAME='libxkbcommon'
PACKAGE_URL='http://xkbcommon.org'
PACKAGE_VERSION='0.5.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH='/usr/lib32/pkgconfig'
RANLIB=''
RT_LIBS=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRICT_CFLAGS=''
STRIP=''
VERSION='0.5.0'
XCB_XKB_CFLAGS=''
XCB_XKB_LIBS=''
XKBCONFIGROOT=''
XLOCALEDIR=''
XORG_MALLOC_DEBUG_ENV=''
XORG_MAN_PAGE=''
YACC=''
YACC_INST=''
YFLAGS=''
ac_ct_AR=''
ac_ct_CC='gcc -m32'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/install-sh'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "libxkbcommon"
#define PACKAGE_TARNAME "libxkbcommon"
#define PACKAGE_VERSION "0.5.0"
#define PACKAGE_STRING "libxkbcommon 0.5.0"
#define PACKAGE_BUGREPORT "[url]https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon[/url]"
#define PACKAGE_URL "[url]http://xkbcommon.org[/url]"
#define PACKAGE "libxkbcommon"
#define VERSION "0.5.0"
configure: exit 1
other info:
core/pacman 4.2.1-1
multilib/gcc-multilib 4.9.2-4 (multilib-devel) [installed]
The GNU Compiler Collection - C and C++ frontends for multilib
multilib/lib32-fakeroot 1.20.2-1 (multilib-devel) [installed]
Tool for simulating superuser privileges (32-bit)
multilib/lib32-libltdl 2.4.5-1 (multilib-devel) [installed]
A generic library support script (32-bit)
Last edited by tsester (2015-05-10 22:10:28)tsester wrote:P.S.: I recently transfered the linux system between failing disks
In that case you should probably check that no other packages are missing files with
pacman -Qkk 2>&1 | grep "No such file or directory"
Any packages that report that they're missing files, you should reinstall. -
Preverification failed with error code 1. BUILD FAILED
Hallo Oracle,
Am learning my first J2me application and when i build it am getting this error. can some one help me understand what it means
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Copying 1957 files to C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified
Preverifying 1957 file(s) into C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified directory.
Error preverifying class com.sun.activation.registries.MailcapFile
VERIFIER ERROR com/sun/activation/registries/MailcapFile
.<init>(Ljava/lang/String;)V:
Cannot find class java/util/Map
C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\nbproject\build-impl.xml:431: Preverification failed with error code 1.
BUILD FAILED (total time: 25 seconds)
this is the contents of build-impx.xml
<?xml version="1.0" encoding="UTF-8"?>
<!-- *** GENERATED FROM project.xml - DO NOT EDIT *** -->
<project name="watsdownapp-impl" default="jar" basedir="..">
<!--load-properties-->
<target name="pre-load-properties">
<property file="nbproject/private/private.properties"/>
<property name="user.properties.file" location="${netbeans.user}/build.properties"/>
<available property="user.properties.file.exists" file="${user.properties.file}"/>
</target>
<target name="exists.config.active" unless="config.active">
<echo level="warning" message="Active configuration (config.active property) is not set - using default."/>
<property value="" name="config.active"/>
</target>
<target name="exists.netbeans.user" unless="netbeans.user">
<echo level="warning" message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically."/>
</target>
<target name="exists.user.properties.file" unless="user.properties.file.exists">
<echo level="warning" message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)."/>
</target>
<target name="load-properties" depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file">
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
<concatfilter prepend="nbproject/project.properties"/>
<containsregex pattern="^platform.active=|^deployment.method=|^deployment.instance="/>
</filterchain>
</loadproperties>
<property name="deployment.instance" value="default"/>
<loadproperties srcfile="${user.properties.file}">
<filterchain>
<replaceregex pattern="^platforms\.${platform.active}\." replace="platform."/>
<replaceregex pattern="^deployment\.${deployment.method}\.scriptfile=" replace="deployment.scriptfile="/>
<replaceregex pattern="^deployments\.${deployment.method}\.${deployment.instance}\.([^=]+)=" replace="\1="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
<concatfilter prepend="nbproject/project.properties"/>
</filterchain>
</loadproperties>
</target>
<!--basic-init-->
<target name="exists.platform.active" unless="platform.active">
<echo level="warning" message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)."/>
</target>
<target name="exists.platform.configuration" unless="platform.configuration">
<echo level="warning" message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration."/>
<property name="platform.configuration" value="CLDC-1.0"/>
</target>
<target name="exists.platform.profile" unless="platform.profile">
<echo level="warning" message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile."/>
<property name="platform.profile" value="MIDP-1.0"/>
</target>
<target name="basic-init" depends="exists.platform.active,exists.platform.configuration,exists.platform.profile">
<fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-mobility-antext.jar file in the IDE installation directory.</fail>
<fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
<fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
<fail unless="src.dir">Must set src.dir</fail>
<fail unless="build.dir">Must set build.dir</fail>
<fail unless="dist.dir">Must set dist.dir</fail>
<fail unless="dist.jar">Must set dist.jar</fail>
<property name="javac.source" value="1.3"/>
<property name="javac.target" value="1.1"/>
<property name="javac.encoding" value="${file.encoding}"/>
<property name="deployment.number" value="0.0.1"/>
<property name="deployment.counter" value="000002"/>
<condition property="no.deps">
<istrue value="${no.dependencies}"/>
</condition>
<condition property="no.preprocess">
<isfalse value="${use.preprocessor}"/>
</condition>
<condition property="no.javadoc.preview">
<isfalse value="${javadoc.preview}"/>
</condition>
<condition property="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes},**/*Test.java,**/test,**/test/**">
<istrue value="${filter.exclude.tests}"/>
</condition>
<property name="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes}"/>
<condition property="deployment.do.override.jarurl" value="">
<istrue value="${deployment.override.jarurl}"/>
</condition>
<condition property="config.active.name" value="DefaultConfiguration">
<length string="${config.active}" trim="true" length="0"/>
</condition>
<property name="config.active.name" value="${config.active}"/>
<taskdef resource="org/netbeans/mobility/antext/defs.properties">
<classpath>
<pathelement path="${libs.j2me_ant_ext.classpath}"/>
</classpath>
</taskdef>
<condition property="skip.deployment">
<equals arg1="${deployment.method}" arg2="NONE" casesensitive="false" trim="true"/>
</condition>
<condition property="app-version.autoincrement.trigger">
<istrue value="${app-version.autoincrement}"/>
</condition>
<condition property="debug.timeout" value="30000">
<or>
<equals arg1="${debugger.timeout}" arg2="" trim="true"/>
<not>
<isset property="debugger.timeout"/>
</not>
</or>
</condition>
<property name="debug.timeout" value="${debugger.timeout}"/>
<nb-overrideproperty name="buildsystem.baton" value="${src.dir}"/>
</target>
<!--cldc-init-->
<target name="cldc-pre-init">
<condition property="cldc-platform.trigger">
<equals arg1="CLDC" arg2="${platform.trigger}" casesensitive="false"/>
</condition>
</target>
<target name="cldc-init" depends="cldc-pre-init" if="cldc-platform.trigger">
<property name="preverify.sources.dir" location="${build.dir}/preverifysrc"/>
<property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
<property name="platform.device" value=""/>
<property name="dist.jad.url" value="file://"/>
<property name="run.cmd.options" value=""/>
<condition property="evaluated.run.security.domain" value="">
<isfalse value="${run.use.security.domain}"/>
</condition>
<property name="evaluated.run.security.domain" value="${run.security.domain}"/>
<condition property="override.jarurl.trigger">
<and>
<istrue value="${cldc-platform.trigger}"/>
<istrue value="${deployment.override.jarurl}"/>
</and>
</condition>
<property name="deployment.jad" location="${dist.dir}/${dist.jad}"/>
<property name="deployment.jar" location="${dist.dir}/${dist.jar}"/>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="${dist.jad}"/>
<include name="${dist.jar}"/>
</patternset>
</target>
<!--cdc-init-->
<target name="cdc-init">
<condition property="cdc-platform.trigger">
<equals arg1="CDC" arg2="${platform.trigger}" casesensitive="false"/>
</condition>
<available file="${manifest.file}" property="manifest.available"/>
<condition property="main.class.applet">
<equals arg1="${main.class.class}" arg2="applet" casesensitive="false"/>
</condition>
<condition property="main.class.xlet">
<equals arg1="${main.class.class}" arg2="xlet" casesensitive="false"/>
</condition>
<condition property="manifest.available+main.class+fat.jar">
<and>
<isset property="manifest.available"/>
<isset property="main.class"/>
<istrue value="${platform.fat.jar}"/>
<not>
<equals arg1="${main.class}" arg2="" trim="true"/>
</not>
</and>
</condition>
<condition property="manifest.available+main.class">
<and>
<isset property="manifest.available"/>
<isset property="main.class"/>
<isfalse value="${platform.fat.jar}"/>
<not>
<equals arg1="${main.class}" arg2="" trim="true"/>
</not>
</and>
</condition>
<condition property="application.version.invalid" value="true">
<equals arg1="${deployment.number}" arg2="" trim="true"/>
</condition>
<fail if="application.version.invalid" message="Property deployment.number must not be empty and must contain version in format %d.%d.%d!"/>
<condition property="sign.jar.trigger" value="true">
<and>
<isset property="cdc-platform.trigger"/>
<istrue value="${sign.enabled}"/>
</and>
</condition>
</target>
<!--semc-init-->
<target name="semc-pre-init" if="cdc-platform.trigger">
<condition property="semc-platform.trigger">
<equals arg1="semc" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="semc-init" depends="semc-pre-init" if="semc-platform.trigger">
<condition property="semc.icon.invalid" value="true">
<or>
<contains string="${semc.application.icon}" substring="$${"/>
<equals arg1="${semc.application.icon}" arg2="" trim="true"/>
</or>
</condition>
<condition property="no.certificateorkey" value="true">
<or>
<isset property="no.application.uid"/>
<equals arg1="${semc.certificate.path}" arg2="" trim="true"/>
<contains string="${semc.certificate.path}" substring="$${semc.certificate.path"/>
<equals arg1="${semc.private.key.path}" arg2="" trim="true"/>
<contains string="${semc.private.key.path}" substring="$${semc.private.key.path"/>
</or>
</condition>
<property name="j9.dist" location="${build.dir}/j9/${semc.application.uid}.j9"/>
<taskdef resource="org/netbeans/modules/j2me/cdc/project/defs.properties">
<classpath>
<pathelement path="${libs.cdc-ant-utils.classpath}"/>
</classpath>
</taskdef>
<taskdef resource="org/netbeans/modules/j2me/cdc/project/semc/defs.properties">
<classpath>
<pathelement path="${libs.semc-ant-utils.classpath}"/>
</classpath>
</taskdef>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="*.sis"/>
<include name="*.SIS"/>
</patternset>
</target>
<!--savaje-init-->
<target name="savaje-pre-init" if="cdc-platform.trigger">
<condition property="savaje-platform.trigger">
<equals arg1="savaje" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="savaje-init" depends="savaje-pre-init" if="savaje-platform.trigger">
<property name="savaje.application.uid" value="TBD"/>
<condition property="savaje.bundle.base.invalid" value="true">
<or>
<equals arg1="${savaje.bundle.base}" arg2="" trim="true"/>
<contains string="${savaje.bundle.base}" substring="$${savaje.bundle.base"/>
</or>
</condition>
<condition property="savaje.unsupported.main" value="true">
<or>
<equals arg1="${main.class.applet}" arg2="true"/>
</or>
</condition>
<condition property="savaje.icon.invalid" value="true">
<or>
<isset property="no.application.uid"/>
<contains string="${savaje.application.icon}" substring="$${"/>
<equals arg1="${savaje.application.icon}" arg2="" trim="true"/>
</or>
</condition>
<property name="jnlp.dist" value="${build.dir}/jnlp/bundle.jnlp"/>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="bundle.jnlp"/>
<include name="bundle.policy"/>
<include name="lib/*"/>
</patternset>
</target>
<!--sjmc-init-->
<target name="sjmc-pre-init" if="cdc-platform.trigger">
<condition property="sjmc-platform.trigger">
<equals arg1="sjmc" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="sjmc-init" depends="sjmc-pre-init" if="sjmc-platform.trigger"/>
<!--ojec-init-->
<target name="ojec-pre-init" if="cdc-platform.trigger">
<condition property="ojec-platform.trigger">
<equals arg1="ojec" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="ojec-init" depends="ojec-pre-init" if="ojec-platform.trigger"/>
<!--cdc-hi-init-->
<target name="cdc-hi-pre-init" if="cdc-platform.trigger">
<condition property="cdc-hi-platform.trigger">
<equals arg1="cdc-hi" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="cdc-hi-init" depends="cdc-hi-pre-init" if="cdc-hi-platform.trigger"/>
<!--nokiaS80-init-->
<target name="nokiaS80-pre-init" if="cdc-platform.trigger">
<condition property="nokiaS80-platform.trigger">
<equals arg1="nokiaS80" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="nokiaS80-init" depends="nokiaS80-pre-init" if="nokiaS80-platform.trigger">
<property name="j9.dist" location="${build.dir}/j9/NOKIA.j9"/>
<property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
<condition property="nokia.icon.invalid">
<or>
<contains string="${nokiaS80.application.icon}" substring="$${"/>
<equals arg1="${nokiaS80.application.icon}" arg2="" trim="true"/>
</or>
</condition>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="${dist.jar}"/>
</patternset>
</target>
<!--init-->
<target name="pre-init"/>
<target name="post-init"/>
<target name="init" depends="pre-init,load-properties,basic-init,cldc-init,cdc-init,semc-init,savaje-init,sjmc-init,ojec-init,cdc-hi-init,nokiaS80-init,post-init"/>
<!--conditional clean-->
<target name="conditional-clean-init">
<uptodate property="no.clean.before.build" targetfile="${build.dir}/.timestamp">
<srcfiles dir="nbproject">
<include name="project.properties"/>
<include name="build-impl.xml"/>
</srcfiles>
</uptodate>
</target>
<target name="conditional-clean" depends="init,conditional-clean-init" unless="no.clean.before.build" description="Clean project in case its meta information has changed.">
<antcall target="do-clean" inheritall="true" inheritrefs="true"/>
</target>
<!--deps-jar-->
<target name="deps-jar" depends="conditional-clean" unless="no.deps"/>
<!--preprocess-->
<target name="pre-preprocess"/>
<target name="do-preprocess" unless="no.preprocess">
<fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
<property name="abilities" value=""/>
<property name="debug.level" value="debug"/>
<mkdir dir="${preprocessed.dir}"/>
<echo message="ignore me" file="${build.dir}/.timestamp"/>
<nb-prep destdir="${preprocessed.dir}" preprocessfor="${config.active.name},${abilities},DebugLevel=${debug.level}" encoding="${javac.encoding}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated}"/>
</nb-prep>
<copy todir="${preprocessed.dir}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
</copy>
<nb-overrideproperty name="buildsystem.baton" value="${preprocessed.dir}"/>
</target>
<target name="post-preprocess"/>
<target name="preprocess" depends="deps-jar,pre-preprocess,do-preprocess,post-preprocess" description="Preprocess project sources."/>
<!--compile-->
<target name="pre-compile"/>
<target name="do-compile">
<fail unless="build.classes.dir">Must set build.classes.dir</fail>
<mkdir dir="${build.classes.dir}"/>
<javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" destdir="${build.classes.dir}" srcdir="${buildsystem.baton}" bootclasspath="${platform.bootclasspath}" encoding="${javac.encoding}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<copy todir="${build.classes.dir}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
</copy>
<nb-overrideproperty name="buildsystem.baton" value="${build.classes.dir}"/>
</target>
<target name="extract-libs" description="Extracts all bundled libraries.">
<mkdir dir="${build.classes.dir}"/>
<nb-extract dir="${build.classes.dir}" excludeManifest="true" classpath="${libs.classpath}" excludeclasspath="${extra.classpath}"/>
</target>
<target name="post-compile"/>
<target name="compile" depends="preprocess,pre-compile,extract-libs,do-compile,post-compile" description="Compile project classes."/>
<!--compile-single-->
<target name="pre-compile-single"/>
<target name="do-compile-single">
<fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
<mkdir dir="${build.classes.dir}"/>
<javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" srcdir="${buildsystem.baton}" destdir="${build.classes.dir}" bootclasspath="${platform.bootclasspath}" includes="${javac.includes}" encoding="${javac.encoding}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
</target>
<target name="post-compile-single"/>
<target name="compile-single" depends="preprocess,pre-compile-single,do-compile-single,post-compile-single" description="Compile selected project classes."/>
<!--proguard-->
<target name="proguard-init" description="Up-to-date check before obfuscation.">
<property name="obfuscation.level" value="0"/>
<condition property="no.obfusc">
<or>
<equals arg1="${obfuscation.level}" arg2="0"/>
<uptodate targetfile="${obfuscator.destjar}">
<srcfiles dir="${buildsystem.baton}"/>
</uptodate>
</or>
</condition>
<uptodate property="obfuscation.up-to-date" targetfile="${obfuscator.destjar}">
<srcfiles dir="${buildsystem.baton}"/>
</uptodate>
</target>
<target name="skip-obfuscation" depends="proguard-init" if="obfuscation.up-to-date">
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
</target>
<target name="proguard" depends="skip-obfuscation" description="Obfuscate project classes." unless="no.obfusc">
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
<fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
<property name="obfuscator.classpath" value=""/>
<dirname file="${obfuscator.srcjar}" property="obfuscator.srcjar.dir"/>
<dirname file="${obfuscator.destjar}" property="obfuscator.destjar.dir"/>
<mkdir dir="${obfuscator.srcjar.dir}"/>
<mkdir dir="${obfuscator.destjar.dir}"/>
<jar jarfile="${obfuscator.srcjar}" basedir="${buildsystem.baton}"/>
<property name="obfuscation.custom" value=""/>
<nb-obfuscate srcjar="${obfuscator.srcjar}" destjar="${obfuscator.destjar}" obfuscatorclasspath="${obfuscator.classpath}" classpath="${platform.bootclasspath}:${extra.classpath}" obfuscationLevel="${obfuscation.level}" extraScript="${obfuscation.custom}"/>
<mkdir dir="${obfuscated.classes.dir}"/>
<unjar src="${obfuscator.destjar}" dest="${obfuscated.classes.dir}"/>
<nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
</target>
<!--obfuscate-->
<target name="pre-obfuscate"/>
<target name="post-obfuscate"/>
<target name="obfuscate" depends="compile,pre-obfuscate,proguard,post-obfuscate" description="Obfuscate project classes."/>
<!--lwuit-build-->
<import file="lwuit.xml" optional="true"/>
<target name="-lwuit-check">
<condition property="lwuit.allowed">
<and>
<available file="nbproject/lwuit.xml"/>
<isset property="is.mesdk_lwuit"/>
</and>
</condition>
</target>
<target name="-pre-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
<target name="-lwuit-build" depends="-lwuit-check" if="lwuit.allowed">
<antcall target="lwuit_build"/>
</target>
<target name="-post-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
<target name="lwuit-build" depends="-lwuit-check,-pre-lwuit-build, -lwuit-build, -post-lwuit-build" if="lwuit.allowed"/>
<!--preverify-->
<target name="pre-preverify"/>
<target name="do-preverify" if="cldc-platform.trigger">
<fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
<mkdir dir="${preverify.sources.dir}"/>
<copy todir="${preverify.sources.dir}">
<fileset dir="${buildsystem.baton}" includes="**/*.class"/>
</copy>
<mkdir dir="${preverify.classes.dir}"/>
<nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>
<copy todir="${preverify.classes.dir}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
</copy>
<nb-overrideproperty name="buildsystem.baton" value="${preverify.classes.dir}"/>
</target>
<target name="post-preverify"/>
<target name="preverify" depends="obfuscate,lwuit-build,pre-preverify,do-preverify,post-preverify" description="Preverify project classes."/>
<!--set-password-->
<target name="set-password-init">
<property name="sign.enabled" value="false"/>
<condition property="skip-sign-keystore-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.keystore.password"/>
<not>
<equals arg1="${sign.keystore}" arg2="" trim="true"/>
</not>
<not>
<equals arg1="${sign.keystore.password}" arg2="" trim="true"/>
</not>
</and>
</or>
</condition>
<condition property="skip-sign-alias-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.alias"/>
<isset property="sign.alias.password"/>
<not>
<equals arg1="${sign.keystore}" arg2="" trim="true"/>
</not>
<not>
<equals arg1="${sign.alias}" arg2="" trim="true"/>
</not>
<not>
<equals arg1="${sign.alias.password}" arg2="" trim="true"/>
</not>
</and>
</or>
</condition>
</target>
<target name="set-keystore-password" if="netbeans.home" unless="skip-sign-keystore-password-input">
<nb-enter-password keystore="${sign.keystore}" passwordproperty="sign.keystore.password"/>
</target>
<target name="set-alias-password" if="netbeans.home" unless="skip-sign-alias-password-input">
<nb-enter-password keystore="${sign.keystore}" keyalias="${sign.alias}" passwordproperty="sign.alias.password"/>
</target>
<target name="set-password" depends="set-password-init,set-keystore-password,set-alias-password"/>
<!--create JAD-->
<target name="add-configuration" unless="contains.manifest.configuration">
<nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
<nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
</target>
<target name="add-profile" unless="contains.manifest.profile">
<nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
<nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
</target>
<target name="create-jad" if="cldc-platform.trigger">
<fail unless="dist.jad">Must set dist.jad</fail>
<mkdir dir="${build.dir}"/>
<dirname file="${dist.dir}/${dist.jad}" property="dist.jad.dir"/>
<mkdir dir="${dist.jad.dir}"/>
<condition property="evaluated.manifest.apipermissions" value="${manifest.apipermissions}">
<not>
<equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
</not>
</condition>
<condition property="evaluated.manifest.pushregistry" value="${manifest.pushregistry}">
<not>
<equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
</not>
</condition>
<condition property="contains.manifest.configuration">
<contains substring="MicroEdition-Configuration: " string="${manifest.others}"/>
</condition>
<condition property="contains.manifest.profile">
<contains substring="MicroEdition-Profile: " string="${manifest.others}"/>
</condition>
<property value="" name="evaluated.manifest.apipermissions"/>
<property value="" name="evaluated.manifest.pushregistry"/>
<property name="manifest.jad" value=""/>
<property name="manifest.manifest" value=""/>
<nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</nb-output>
<nb-output file="${manifest.build.file}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</nb-output>
<antcall target="add-configuration" inheritall="true" inheritrefs="true"/>
<antcall target="add-profile" inheritall="true" inheritrefs="true"/>
<property name="manifest.available" value="true"/>
</target>
<!--do-extra-libs-->
<target name="do-extra-libs" if="extra.classpath">
<property name="dist.lib.dir" value="${dist.dir}/lib"/>
<mkdir dir="${dist.lib.dir}"/>
<copy todir="${dist.lib.dir}">
<path path="${extra.classpath}"/>
<flattenmapper/>
</copy>
</target>
<!--nokiaS80-manifest-->
<target name="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger">
<fail message="Main class is not set!">
<condition>
<equals arg1="${main.class}" arg2="" trim="true"/>
</condition>
</fail>
<mkdir dir="${build.dir}/j9"/>
<taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
<j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
<copy file="${manifest.file}" tofile="${manifest.build.file}" failonerror="false"/>
<property name="manifest.available" value="true"/>
<loadfile property="nokia.manifest.j9" srcFile="${j9.dist}"/>
</target>
<target name="nokiaS80-prepare-manifest" depends="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger" unless="nokia.icon.invalid">
<pathconvert property="logo.icon.name" pathsep=" ">
<path path="${nokiaS80.application.icon}"/>
<chainedmapper>
<flattenmapper/>
<globmapper from="*" to="*"/>
</chainedmapper>
The error says class file is missing, you can try to clean and build.
Maybe you are looking for
-
I Downloaded new version of ITunes - won't open now.
What a fiasco. Everything was working fine until I bit on the message to "update my IPod software". I finally succumbed to that then everything went to (*&(. After the IPOD update, my Itunes would not open my IPOD even though the device manager recog
-
Does anyone know a way to import payments that were made for a set of invoices that were imported through the Payables Open Interface into Oracle Payables through an API or any other kind of interface? Basically i need to import invoices and payments
-
OK. Please someone has to have figured this out by now? I can't do anything with this very expensive paperweight. It won't let me access my wifi, and since i have AT&T, I might as well not have any phone service at all. HELP!!!
-
Hi, LQ02 transaction working well for a particular warehouse (JWH). When we try to use the same transaction for the other warehouse, it did not work. We are using BDC and passing through call transaction to post WM-IM. screen input as follows : Wareh
-
Inspector and Library Windows Disappearing?
Hey everyone- hopefully someone can help me. I have started working on a project that I am using lower thirds that I created in Motion. I haven't opened Motion in about a month or two but now a dead line is approaching and i need to get them done. I