Configure External Modem in Solaris 10

Friends, I am new to this OS.Plz help me that how i can configure my external modem in this OS.
Thanks

Some links:
http://docs.sun.com/app/docs/doc/817-0403/6mg741bst?a=view
http://docs.sun.com/app/docs/doc/817-0403/6mg741bt2?a=view
If you are going to use PPP, also check out this one:
http://docs.sun.com/app/docs/doc/816-4555/6maoquih3?a=view

Similar Messages

Dial up Connection using External Modem in Solaris Intel Version

Hi
How to Install a modem in Solaris 7 Intel version and how to make a Dial Up Connection Using this external Modem.
Can any one Help me....
send your reply to [email protected]
Thanks in Advance ....
Vinod.

hello
i'm fond that inside the folder /etc you have another one called /ppp and inside the folder /ppp you have some files that you have to edit in orther to configure your user name and password, but everything is explained on that files, and is bether that you reed then
then in the console you have to type pppd ttya (if your modem is conected to the Com1) call myisp
were myisp is one of the files that you have to configure, but how i'm told you everyting is splained on that files
If you dont have it please install the 2 Cd
the only thing that i'm can't configure was diseble the "wait for dial tone" and in order of that i'm not able to conect to the internet, if you now someting aoubt that please send a e-mail to [email protected]
tanks

How to install external modem on Solaris 10 x86

hi guys,
need to have my latest USR Courier V.Everything external modem installed under Solaris 10 x86 for using with Hylafax as a fax.
the question is how do i actually install it? tried googling, but found it a little difficult to find anything on the subject.
pls advise
many thanks!

Rather than explaining it all here go to this URL ...
http://www.sunhelp.org/unix-serial-port-resources/

Configuring usb modem in Solaris 10

Hi All,
I have Solaris 10 3/05 installed , I have connected a usb modem to the box and on executing cfgadm -l , I am able to see usb0/2 as configured .
I donot know how to dial out to my isp using the modem .
Please do let me know the procedure or some document or refernces on the net which outlines the procedure .
Thanks and Regards
PK

Heloo
I'm trying to install a usb converter to serial hardware too. I want use a modem, but I obtain de next message in /var/adm/message:
Nov 7 18:42:41 solaris10 usba: [ID 912658 kern.info] USB 1.10 device (usb403,6001) oper
ating at full speed (USB 1.x) on USB 1.10 root hub: device@2, usb_mid4 at bus address 2
Nov 7 18:42:41 solaris10 usba: [ID 349649 kern.info] FTDI usb serial converter FTCUI3
AP
Nov 7 18:42:41 solaris10 genunix: [ID 936769 kern.info] usb_mid4 is /pci@0,0/pci1043,80
a6@1d/device@2
Nov 7 18:42:41 solaris10 genunix: [ID 408114 kern.info] /pci@0,0/pci1043,80a6@1d/device
@2 (usb_mid4) online
Nov 7 18:42:41 solaris10 usba: [ID 723738 kern.info] /pci@0,0/pci1043,80a6@1d/device@2
(usb_mid4): no driver found for interface 0 (nodename: 'interface') of FTDI usb serial c
onverter FTCUI3AP
I'm load next modules:
80 f9000000 1d39c - 1 usba (USBA: USB Architecture 2.0 1.59)
91 f909c000 1b94 27 1 usb_mid (USB Multi Interface Driver 1.38)
217 feb856f4 12398 34 1 usbser_edge (USB Digi Edgeport driver 1.5)
218 fe996218 3274 - 1 usbser (USB generic serial module 1.14)
219 f91c3000 364c 37 1 usbsksp (USB keyspan usb2serial driver 1)
220 f91c5b34 1fb0 56 1 usbsprl (USB Prolific PL2303 driver 1.1)
Solaris 10 don't make the device file (in /dev) for my usb2serial converter hardware.
Could you make use your modem??
Thanks in advance.

How to configure a internal modem in solaris X86

Hi,
We were testing a solaris installation in one of my friend's sysytem and i would like to know how to configure an internal modem in solaris to dial out to ISP. If some one can help us in setting this up it will be really helpful.
Waiting for your response
Thanks in advance
CS

Hi Sharmac,
Try this URL:
http://www.geocities.com/~gregl/htm/Int_Modem_Setup.htm
Revert back.
Thanks & Regards,
Senthilkumar
SUN - DTS

MacBook + Apple external modem

I was given a brand-new MacBook at work and a brand-new Apple USB modem to take home, where I only have dial-up.
When I open Internet Connect, it comes up under the BlueTooth tab. I put in all the info and it won't even dial. I wish I had written down the error message (can't check it now) but basically it says it "can't open Internet Connect". Does this mean it's not recognizing the modem?
I tried to "edit configurations" and noticed there are 4 versions of Apple external modems there, and I tried all 4 with no luck.
Any ideas?
MacBook Mac OS X (10.4.8)

Connect the modem to the USB port. Open Network preferences and select External Modem then click on Configure button. Click on the TCP/IP tab and set the Configure IPv4 drop down menu to DHCP and click on Apply Now button. Then click on the PPP tab and fill in your ISP information, user ID, password and telephone number (these are for your dial up account.) Click on Apply Now button. Click on the Modem tab. Select the Apple External Modem V.92 from the drop down menu. Check the box labeled "Show Modem Status in Menu Bar." Click on the Apply Now button. You should be all set. Quit System Preferences. From the modem status menu bar item select Connect.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Fax modem won't work - Apple USB external modem

I am new to Mac, well relatively.... It's been 8 years, and now I am back!!
Anyway, I got an iMac 3 weeks ago, and love it. However, I can't get my external modem/fax modem working. I bought the Apple USB external modem, hooked it up, setup a fax printer, and NOTHING. I try to print to the fax and it won't even dial. I call the fax number, and it won't answer. I know it's a live phone line b/c I can hook it up to my fax machine and it works fine, both for incoming and outgoing messages. Is there a trick? Do I have to set up an actual external modem interface in the networks panel just to use an existing phone line? Thanks for your help....

You actually need to configure your iMac as a fax machine to send and receive faxes through the Apple USB modem.
From Faxing in Mac Help in the Finder Help menu;
*To set up your Mac to receive faxes*:
1. Choose Apple menu > System Preferences and click Print & Fax.
2. Select the fax modem in the Printers list.
3. Type your fax number in the Fax Number field. This is used to identify your computer when you send or receive a fax.
4. If you want to control your computer’s fax functions from the menu bar, select “Show fax status in menu bar.” If you don’t want to receive faxes automatically, you must select this option. If you receive faxes automatically, you may want to select this option so you can view status information more easily.
5. Click Receive Options.
6. Select “Receive faxes on this computer,” and choose the number of rings before your computer answers a fax.
a. If you want to receive faxes automatically, make sure your computer answers the phone before any other device that may be connected to it, such as a phone answering machine.
b. If you don’t want to receive faxes automatically, set the number of rings to the highest number possible, and use the Fax status menu to receive faxes manually.
7. Choose what to do with the fax after it arrives; you can save it as an image file, email it, and print it to a printer.
*To send a fax:*
1. Choose File > Print, and then choose Fax PDF from the PDF pop-up menu.
2. Type the fax number in the To field, or click the Address Book button to the right of the To field to select a number. If you want to paste a number into the To field and the Edit > Paste command isn’t available, hold down the Control key as you click the To field and choose Paste from the menu that appears.
3. If your phone system requires you to dial a prefix for an outside line, type it in the Dialing Prefix field.
4. If you want to include a cover page, select “Use Cover page” and enter a subject and message.
5. Make sure the correct fax device is selected from the Printer pop-up menu.
6. To change your options, choose the option category from the print options pop-up menu. For example, to choose your modem’s behavior when faxing, choose Fax Modem. You can choose whether to dial with touch tones or pulse tones, whether to listen to the modem as it dials, and whether to wait for a steady dial tone before dialing.
7. Click Fax.

Connecting to an external modem

When I first purchased my PowerMac G4 back in March 2003, the first mac I ever bought, it was to add to my ethernet network and came without an airport card. Under the operating system it came with (OS X something) I manually configured an external modem to connect to the internet for systems up grads etc. Later, I bought an airport card when my network went wireless, but due to antenna problems it never worked satisfactorily. Consequently, some several O/S upgrades later, I now want to connect the G4 to my wireless modem, for internet and network access via an ethernet cable. However I can no longer find where I have to configure the modem? Can anyone please advise.

Make a New Location, Using network locations in Mac OS X ...
http://docs.info.apple.com/article.html?artnum=106653
The Interface that connects to the Internet (Ethernet), needs to be drug to the top of Network>Show:>Network Port Configurations and checked ON.

N8 as external modem and MS Outlook

I have a problem when using my nokia n8 as external modem via g3 as internet connection for my pc. I connect via nokia suite and no problem occurs with MS internet explorer, but MS outlook is not able to connect and download my emails. Any suggestion for this?
Thanks
My PC configuration
Windows 7 64-bit
MS Outlook 2010

I checked my bluetooth setting, but it works fine if I don't use my external modem. It's the combination of both that freezes my mac; could it be a problem of drive of my external modem??

MA034 Apple external modem

Victim of late-night eBaying, I find myself with an Apple MA034 external modem which I only bought thinking that I could use it to send/receive FAXes occasionally. I imagined plugging it into the phone line and running FAX software (what software??) on my Mac...
Is this possible? Especially, have you done it?

Yes, it does show as you say, as 'External Modem, not configured'. Configuration requires a Telephone no., Account Name and Password, which sounds like it assumes a straight-forward dial-up connection to an ISP. I, however, want to be able to Fax occasionally which needs no ISP, just a fax machine at the other end. And, of course, some software - Mac or 3rd party - to generate the dialling codes. (Just in case my Mac 'just works (tm)' I put in a known fax number, rubbish username and pwd and pressed Connect. It just hung around and disconnected).
I'm still trying to establish whether you or anyone has actually used a Mac + MA034 to send a fax and, if so, what needed to be done to do so. If this combination can be set up to receive them in the background as well, so much the better!

External Modem Settings not locking

Hi,
After numerous troubles with AOL I finally managed to get my Mum online with her new Mac Mini a few weeks ago, however since doing that she always has to manually change her settings to "External Modem" in Network prefs, it doesn't stay defaulted to those settings.
Anything I can try to change this?

You're Welcome IntelMacMini!
To delete the pref files, Navigate to:
HD > USERS > YOUR HOME > LIBRARY > PREFERENCES
If present, move to Trash:
com.apple.internetpref.plist (a file)
com.apple.internetconnect.plist (a file)
com.apple.internetconfig.plist (a file)
I can't be sure these settings will work for you. It's the configuration that works for Dial-Up on my iMac. But it may give you some clues. You may need to make some adjustments, according to your system, and connection.
Open System Preferences > Network
In each of these panels, after you have made your selections or changes, be sure to click on the "Apply Now" button in the lower right corner, if it's available.
Location: Select "Automatic"
Show: Select "External Modem", or however you connect.
On the PPP screen, click "PPP Options". CHECK ONLY THESE options:
"Send PPP echo packets"
"Use TCP header compression"
Click OK
On the TCP/IP screen, Configure using IPv4: Select "Using PPP"
On the Modem screen, Select your modem from the list. I'm using an iMac (Summer 2001), and I have "Apple Internal 56K Modem (v.90)" selected. Select your External modem.
Check "Enable error correction and compression in modem"
"Wait for dial tone before dialing"
"Dialing": Tone
"Sound": On
"Show modem status in menubar" (This isn't really necessary, but it's handy.)
Also select your Country.
Then, still in "Network" preferences,
Location: "Automatic"
Show: "Network Port Configurations"
Make sure "External Modem", or however you connect, is checked and at the top of the list.
Click "Apply Now" at the bottom of the screen.
Quit System Preferences.
Depending on the ISP, before you sign on, you may have to reset your "Access Numbers" & "Location".
As there also are other issues, I suggest that Repair Disk & Repair Permissions be run as well.
Good Luck!
ali b

SHDSL using an external modem

Hello,
Just wondering if it is a possible to configure a Cisco 2611XM for SHDSL using an external modem such as the RAD product ASMi-52 which does the line sync for you.
The CHAP authentication needs to be done by the router behind it (2611XM in this case).
I've never done this without a wic, any help would be greatly appreciated.

Hi Leo,
Is PPPoE used for SHDSL? sorry for the silly question !
A standard SHDSL connection with a WIC looks like this:
interface ATM0
no ip address
no atm ilmi-keepalive
dsl equipment-type CPE
dsl operating-mode GSHDSL symmetric annex B
dsl linerate AUTO
interface ATM0.1 point-to-point
description INTERNET
pvc 1/34
ubr 1024
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface Dialer1
description INTERNET
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp chap hostname xxxxxxxxx@xxxxxx
ppp chap password xxxxxxxxxx
crypto map mymap
In my scenario, I'm not using the WIC, so I'm a bit confused as to how the configuration shouyld like as I have no ATM interface.

Error while configuring external LDAP user store with weblogic

Hi,
I have weblogic 10.3 installed and I can access weblogic admin console using weblogic (admin) user. I want to use external ldap user store to access admin console with users present in external ldap.
To do this, I have configured authentication provider and provided all the required details to connect to ldap.
For example:
Base DN: cn=admin,cn=Administrators,cn=dscc (user with which we will connect to LDAP)
User DN: ou=People,dc=test,dc=com
Group DN: ou=Groups,dc=test,dc=com
This authentication provider is set to SUFFICIENT mode. I have deleted the default authentication provider.
In the boot.properties file I have given the user name and password of the user with which LDAP instance was created something like below.
password=xxxxxxx
username=admin
Now while starting the admin weblogic server, I am getting the below error:
<Jul 25, 2012 2:22:28 PM IOT> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Jul 25, 2012 2:22:28 PM IOT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:960)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User admin javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User admin denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Jul 25, 2012 2:22:28 PM IOT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jul 25, 2012 2:22:28 PM IOT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jul 25, 2012 2:22:28 PM IOT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Can anyone please suggest how to resolve this problem? If, anyone can suggest the exact steps to configure external ldap store to manage admin console via ldap users.
Regards,
Neeraj Tati.

Hi,
Please refer the below content that I found for Oracle 11g in the docs.
"If an LDAP Authentication provider is the only configured Authentication provider for a security realm, you must have the Admin role to boot WebLogic Server and use a user or group in the LDAP directory. Do one of the following in the LDAP directory:
By default in WebLogic Server, the Admin role includes the Administrators group. Create an Administrators group in the LDAP directory, if one does not already exist. Make sure the LDAP user who will boot WebLogic Server is included in the group.
The Active Directory LDAP directory has a default group called Administrators. Add the user who will be booting WebLogic Server to the Administrators group and define Group Base Distinguished Name (DN) so that the Administrators group is found.
If you do not want to create an Administrators group in the LDAP directory (for example, because the LDAP directory uses the Administrators group for a different purpose), create a new group (or use an existing group) in the LDAP directory and include the user from which you want to boot WebLogic Server in that group. In the WebLogic Administration Console, assign that group the Admin role."
Now in my LDAP directory, setup is in such a way that Administrators is a group created under following heirarchy " cn=Administrators,ou=Groups,dc=test,dc=com" and there is one user added in this Administrators group.
The problem that I am having is when I modify the Admin role in which Administrators group should be added what exaclty I should give in Admin role. Whether I should give only Administrators or full DN: cn=Administrators,ou=Groups,dc=test,dc=com ???
When i give full DN, it takes every attribute as different, i mean cn=Administrators as different and ou=Groups as different and shows a message that cn=Administrators does not exist.
Here not sure what to do.
Also if external ldap authentication provider is the only provider then I need to give the user information in boot.properties file also for weblogic to boot properly. Now, what should I give there in user? still complete DN ??
Regards,
Neeraj Tati.

How to install printer and modem in solaris

Please send me detailed installation information about how to install a serial or aparallel printer on solaris 7 and 8 and also how to install the modem on solaris 7 and 8.pls send me some docs,informations etc.

Solaris 8 includes an "answerbook" CDROM that explains this
in great detail. Look in the <tt>Solaris 8 System Administrator Collection</tt> �
<tt>System Administration Guide, Volume 2</tt>.
You can also read the answerbook documentation online on
http://docs.sun.com.

Connect iPhone to external modem?

Maritime and emergency workers need to access the web and email over a satellite connection when there is no cellular service available. Although this is a lot slower than a cellular connection, it is better than nothing.
Can I set up the networking on an iPhone to access the internet via a PPP connection over an external modem? I would connect the external modem to the iPhone using either a USB connection (virtual serial port) or to a serial port on the iPhone if it has one.
Does the iPhone have the ability to drive a network connection through an external modem?
Thanks,
--- joe crowley

neuruoanatomist,
Thanks for the suggestion. Would it be possible to set up a PPP connection over Bluetooth in order to save some power?
--- joe crowley

Configure External Modem in Solaris 10

Similar Messages

Maybe you are looking for