Configure fixe time in CUME for IP Phone
Hi
I have Cisco Unified Communications Manager Express Version 7.0(1)
It is configured and work fine
But there is wrong time display on on the IP phone
1 week ago the time display was good on the IP phone
My time is GMT + 1 (it never change, it is not depend on season)
I have may type of ip phone
7911, 7931, 7960, 7961
How can I fixe this issue ?
Hello,
Your CME router in a way will act as your NTP server for the phones (I want to believe that option-150 is pointing to the CME as well).
If your timezone is GMT +1, then configure time zone on the router and from telephony service:
Note: clock on the router are correct before configuring the timezone:
"router(config)# clock timezone gmt +1" then:
go to the Telephony-service:
Router(config)#telephony-service
.................. time zone gmt +1
Then reset the phones. This should do it....
Cheers
Similar Messages
-
Why does it take so long for the phone to turn back on after the battery dies?
Is apple going to do anything about the length of time it takes for the phone to turn back on after the battery drains?
Just a thought, but if the battery is not allowed to completely die then the amount of time it takes for the device to power back up is irrelevant.
Charge the device regularly and often. One of the worst things for a Lithium Ion battery like that in an iPhone is completely discharging it. -
I don't know what happened to my iphone but for some reason, siri is talking to me now and I have to tap everything 3 times inorder for my phone to do what I want it to do. How can I fix this problem?
Hello, Alayah14.
Thank you for visiting Apple Support Communities.
This sounds like VoiceOver has been enabled. Here are the steps on how to disable this feature.
iOS: Configuring accessibility features
http://support.apple.com/kb/HT5018
Cheers,
Jason H. -
My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery." My question is: Why is this happening and how do I fix it? (I'm losing battery power precipitously). Thanks in advance for any assistance with this question.
Thanks Kilted Tim, you solved the problem. I'm mightily impressed at the simplicity of the solution!
Jaded Kane -
My MacBook Pro shut off three times yesterday after plugging my phone in but I managed to switch it back on each time. I left it to rest for about 20 hours and then today it Has been working fine all morning. Using indesign and Skype which usually slow it down anyway but it's been fine. Then I plugged my iPhone 4S into it and it just shut off again. But this time it won't switch back on. No idea why this has happened but I hadn't saved my work either. I'd not long plugged the charger in to it but now, it's still plugged in, but the light on it is very dim and is just flashing.
No idea what to do. Please help!You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
Minimum activation time for new phone
I recently got an iPhone 4S. One of the camera apps I use frequently is busted on the 4S but works fine on the iPhone 4, which is what I had previously.
I'd like to re-activate my iPhone 4 until the developers get around to fixing the camera app (it's Hipstamatic for anyone who's curious).
My question: when you get a new phone, does it have to be active for a minimum amount of time? I know the phone has to be activated within 5 days of purchase, but once it's activated does it need to stay active for a certain number of days or weeks?If you purchased the phone directly through Verizon, you can deactivate it immediately if you like. I don't think the iPhone is being sold through third-party retailers yet (if it ever will be), so you should be fine.
For future reference, if you do buy through a third-party (like Amazon, or Wirefly), they can ask you to sign a second contract directly with them. That contract may require the phone to stay active for at least 180 days with the same plan, or you will owe that retailer an Early Termination Fee. -
What do I do if I have one Apple ID for my phone and a different one for my mac. I have tried to sync garageband to my mac from my phone but it won't connect. Is it because of the different ID's? If so what can I do to fix it?
You can use one account with iTunes on your Mac, and different account(s) with the Mac App Store (for buying/downloads apps or OS updates for your Mac), iCloud (System Preferences > iCloud) and Messages (Messages > Preferences, or command-comma)
-
I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't have the time to install it at that point. It downloaded but didn't stop. It continued to the 'backing up your iPhone' segment then froze. I waited at least an hour with no change. Finally I unplugged my phone..iTunes wasn't responding.I rebooted my pc then tried the same thing again. Same outcome even though I let it "Back Up" for 7-8 hrs while I slept. Same Story............... iTunes 10.4.0.80 is the software I'm using. When my phone is 'plugged' in what I see on it's face is "Sync in Progress".....for hours!
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Synced media like apps and music are not included in the iPod backup that iTunes makes. You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have a water damaged iphone 5c. I was thinking about taking it to the Apple store and paying the 269 dollar service charge for them to attempt to fix it. My question is: If they can't fix it, will they replace my phone for that $269 dollars, or will I have to pay full retail price for a new phone?
They do not repair at all.
The replace.
The $269 is for a replacement. -
How i fix the error 1015 for my iphone3g coz my phone i opining
how i fix the error 1015 for my iphone3g coz my phone i opining and also i can use since i face that problem
Yes, if it has been jailbroken, then there is probably nothing that you can do and you will never be able to use it, so ditch it and buy a new phone.
If it's an iPhone 3g, then it is a very old phone anyway and you shoud consider buying a new one. -
I rented a movie on my iPad. It downloaded fine but would only play 36 minutes, 5 seconds worth of the movie; although the time kept running for the length of the movie. Can this be fixed or do I need to get a refund?
You can try a rest:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- If that does work, contact iTunes and request a redownload. You can ask for a refund though. -
I'm thinking about getting an i pod touch for my daughter. If I get the 4th generation i pod, is it compatible with the ios 7 updates for i phones as far as if she wants to imessage or face time with me?
The 4G can not run IOS-7. "6" is the highest that it can go. You need the 5G for IOS-7.
However, that won't affect her ability to use iMessage and FaceTime. -
I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to back up.
Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you. -
Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neerajHi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj -
As the thread says.
"Contact iTunes support before you can make a in-game (in-app) purchased buy again.. Solutions? Don't have time to wait for iTunes support to fix this =pYou need to do as requested
Maybe you are looking for
-
I explained to Kavitha from the iTunes Store Customer Support the following information: - my home country is Canada - I am an English speaker - I currently live in China, but I don't read or speak Chinese - my Apple ID was created in Canada - my hus
-
I need help with windows 8 on my pc, PLEASE!
HI, i have windows 8 on my pc. I've been playing games on my computer for 8 months since I bought it. I woke up the other day got on Big Fish to play my games as always, and ever time I push play it starts up then immediately goes back to the play. W
-
F4 values are not accepted by the screen fields
I have a field called month in a screen i could get the values for F$ by using below field. My F4 values are there in the domain fixed values so i had to use DD_DOMA_GET.and got the values fron ZMONTH domain. When im pressing F$ i can c input help va
-
IPad as Container for Video-Files?
I want to save my AVCHD and Quicktime Movies of my Nikon D7000 on my iPad 2 during my holidays. And I want to hav a look on the videos. Is it possible? Is thera a special App for this?
-
Captions in Interactive Widget not displaying fully on the iPad in preview
Hi I am using the Interactive Widget with overplay captions. They appear fine in iBook but only show the first 2 lines of copy on the iPad? Any tips on how to tweak this to work the same on the ipad? Thanks!