Configure Formula dialog not being displayed

I have just installed LabVIEW and I am working thru the tutorials in the Getting Started Manual. I am at the point where I am adding a Formula to the Generate and Display example VI. When I place the Formula Express VI on the block diagram I expect to see the Configure Formula dialog box. No such dialog is displayed. There is a grey box with no other information placed on the block diagram. Also, the run buton is shown as 'broken" such that I cannot 'Run" the VI. I do not have a clue what could be going on here and I am wondering if there was a problem during installation that leaves me without Formula support. I have not had any problems with placing and configuring any other VI's.
Please offer any thoughts or suggestions on how to solve this!
Thanks,
Mike

This is a know issue in LabVIEW 8.5, for more information and a workaround, see:
http://forums.ni.com/ni/board/message?board.id=170&message.id=290157
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

Check boxes are not being displayed in any list applets

Issue: The check boxes are not being displayed in any list applets in the system. A check box can be marked in the system, but as soon as the user clicks anywhere outside of the box the check box 'visibly' disappears. If you hover the mouse over the check box it displays a 'Y'. However, check boxes are working fine for the form applet, the issue is only with the list applet.
I verified the checkboxes work fine in the thick client and in production. However, it is the testing environment, which belongs to client, that is showing the above behavior. I think there is some setting that is missing for them. But I am unable to figure it. I would really appreciate if someone could help !!
Thanks in advance

One way that you could make it work (just tried it out again) is to use the windings font
and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
(depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
There is an example file: xdo example.cfg that you rename and change accoringly.
The font is there setup for windows 2000 as an example. Select the correct font
path - for my XP it is:
<font family="Wingdings" style="normal" weight="normal">
<truetype path="C:\WINDOWS\fonts\wingding.ttf" />
</font>
Then you can put the symbols into your RTF template and it will be rendered.
At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
I am pretty sure I tried it before with 5.5.
Didn't have the 5.5 manual with me - so I have to check what that says again..
Hope it helps,
Klaus

Excelicon is not being displayed in the alv output

Hi,
iam using the standard tool bar, yet the excel icon is not being displayed in alv ouput.and also in the menubar list export the spreadsheet option is gr

OSS# 1140542?
or you may search other.
Edited by: Amit Gujargoud on Nov 3, 2008 3:10 AM

Fieldname in not being displayed in the table maintenance

Hi Experts,
I have created a table maintenance for a custom table.The table contains 10 fields out of which first 3 are key fields.
on the 3rd key field i have supplied F4 help so as to populate the 4th field automatically based on the selection of 3rd field.
everything is working fine but last 6 'fieldname' is not being displayed on the column bar.instead of fieldname there is '+' sign on the column. And i have checked in layout(screen) also only first four fields being displayed.
plz help.
Thanks n Regards,
Mukesh

Hello Mukesh,
As you know, data element or pre-defined data type will be assigned as field type to the fields in a table. If you are assigning the data element, then the data element has the option to give the field label.
If you are assigning the data element and the field label is empty, then + sign will come. In other case - if you assigning the pre-defined data type also, the screeen column header will be shown as + sign.
In both the above cases, you can change the column header manually in the layout.
Regards,
Selva K.

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
Here's a link to the product feedback page: http://www.apple.com/feedback/
I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
Cheers!

Coulmn values is not being displayed in obiee 11g

Hi All,
Below is the sample xml generated from data structure.
++
+<DATA_DS>+
+<G_1>+
+<LOCATION_NAME>ABCD</LOCATION_NAME>+
+<PRODUCT_ID>1012331403</PRODUCT_ID>+
+<PRODUCT_SUBID>101233140302</PRODUCT_SUBID>+
+<PRODUCT_NAME>ABCD1</PRODUCT_NAME>+
+<REVENUE>3924973.97</REVENUE>+
+</G_1>+
+<G_1>+
+<LOCATION_NAME>ABCD</LOCATION_NAME>+
+<PRODUCT_ID>1012331401</PRODUCT_ID>+
+<PRODUCT_SUBID>101233140104</PRODUCT_SUBID>+
+<PRODUCT_NAME>ABCD2</PRODUCT_NAME>+
+<REVENUE>688244.58</REVENUE>+
+</G_1>+
+<G_1><LOCATION_NAME>EFGH</LOCATION_NAME>+
+<PRODUCT_ID>1011165401</PRODUCT_ID>+
+<PRODUCT_SUBID>101116540101</PRODUCT_SUBID>+
+<PRODUCT_NAME>EFGH1</PRODUCT_NAME>+
+<REVENUE>3763099.99</REVENUE>+
+</G_1>+
+</DATA_DS>+
We were unable to see the REVENUE column values in the report. We were able to see the values while creating layout, but unable to see the values in report. Report is not having any filters or parameters. This is build on two tables. Revenue in one table and details in another table.
Thanks.

Hi,
Just noticed that, able to see column values in HTML, pdf views but unable to see in interactive view.
While creating the layout checked in Interactive view, at that time able to get column values, but in the report column values are not being displayed in interactive view.
But in HTML, list option , Repeating Section is not working, so have to see in interactive view only.
I can say, in Interactive vew Aggregate functions are not working properly. We need tro use Repeating Section and List option in report. so we need interactive view only.
Any ideas..
Thanks.

Dynamic image is not being displayed in Adobe Reader 8.1

Hi,
In interactive form, we have followed below required steps to show a dynamic image.
For the left image, drag and drop an Image Field element from the standard Library tab to the Body Pages pane. Select this image field and edit the following properties:
Click on the Layout tab and choose None for the Caption position.
Click on the Object, then the Binding tab and choose None for Default Binding.
Click on the Field tab, enter $record.SapOnlineShopUrl for the URL entry, and select Use Image Size for the Sizing field.
Click on the script editor and enter the following FormCalc script statement, which enables the dynamic integration of the image. Show: initialize Script: this.value.image.href = xfa.resolveNode(this.value.image.href).value;
Language: FormCalc Run At: Client
Image is displayed properly in Adobe reader 7.1 but it's not being displayed in Adobe reader 8.1.
I was going through some forums and understand that Adobe 8.1 blocks href URL. If this is indeed true, what's the alternative way to show a dynamic image?
Regards
Chandra
Edited by: Chandrashekhar Singh on Apr 24, 2008 7:28 AM

Soory, I thought its static image....
Regards,
Vaibhav Tiwari.
Edited by: Vaibhav Tiwari on Apr 24, 2008 11:45 AM

IView is not being displayed in full page

I created one iView, added it into a page. I set the layout as 1 Column Full width. My view is not being displayed in entire window. What kind of property, I should set in the page.

Sunil:
By default, the iView's height property is fixed. After I changed iView's height property to Full page, The page displays correctly.
I setup two views in one page using one column Full width. Both the iviews are setup in one page. Now both the iViews height is set up to Full Page as well as page's height is setup to Full page. Now, the Top iView is being displayed with 3/4th of window size and bottom iView is being displayed with 1/4th of window size. I want to display both of them with equal size.
Thanks for your help.

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

Images not being displayed in metro apps

OS: Windows 8.1 enterprise
Images are not being displayed (a small cross mark shown on the left) when I open metro apps that I download from Store. The store as well doesn't show images. I am able to see images in some built in metro apps like travel and weather.
What's the fix. I guess the company network is blocking it. What is the work around?
Thanks.
NOTE: This is WINDOWS 8.1 METRO UI issue. It doesn't have anything to do with VISIO. The only option that I had to choose when i selected Windows 8.1 is VISIO. This site appears to be broken and not user friendly.

Hi,
Which metro app did you download and occur the issue? As you post the question in Visio forum, did you use Visio 2013 preview? As far as I know, the version had been off the store after the official version released.
If I misunderstand, please give me more information (Such as App name) or images about your question.
Regards,
George Zhao
TechNet Community Support

RE: [iPlanet-JATO] TileView not being displayed

Craig.you are quite the JATO expert now!
cb
-----Original Message-----
From: Craig V Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098124198039130151196028">craig.conover@S...</a>]
Sent: Tuesday, April 17, 2001 8:11 PM
Subject: Re: [iPlanet-JATO] TileView not being displayed
I had this issue a while ago and forget the exact solution Todd gave me, so
I'll take a guess untill I can find it somewhere or untill Todd or Mike get
back online to verify.
Set the size of the model. I know your TiledView is not bound, but actually
it is - to the DefaultModel.
Try this:
getDefaultModel().setSize(1)
getPrimaryModel() should work as well.
let me know if that works or not
If I find my example, I'll repost.
c
----- Original Message -----
From: MShanmugam@c...
Sent: Tuesday, April 17, 2001 7:38 PM
Subject: [iPlanet-JATO] TileView not being displayed
Hi All,
I have a TileView which is not bound to any models.
It should display one row however none are being displayed. Following
is the constructor as a reference.
public pgVoucherListrptCheckInfoTiledView(View parent, String name)
super(parent, name);
setMaxDisplayTiles(1);
setPrimaryModel((DatasetModel) getDefaultModel() );
registerChildren();
initialize();
The problem in the nextTile() method, the super.nextTile allways
returns false. This seems to be because the
TiledViewBase.getPrimaryModel().next() allways returns false.
All the bound tiled views work fine.
Any help will be appreciated .
Thanks
[email protected]
[email protected]
[Non-text portions of this message have been removed]

Craig.you are quite the JATO expert now!
cb
-----Original Message-----
From: Craig V Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098124198039130151196028">craig.conover@S...</a>]
Sent: Tuesday, April 17, 2001 8:11 PM
Subject: Re: [iPlanet-JATO] TileView not being displayed
I had this issue a while ago and forget the exact solution Todd gave me, so
I'll take a guess untill I can find it somewhere or untill Todd or Mike get
back online to verify.
Set the size of the model. I know your TiledView is not bound, but actually
it is - to the DefaultModel.
Try this:
getDefaultModel().setSize(1)
getPrimaryModel() should work as well.
let me know if that works or not
If I find my example, I'll repost.
c
----- Original Message -----
From: MShanmugam@c...
Sent: Tuesday, April 17, 2001 7:38 PM
Subject: [iPlanet-JATO] TileView not being displayed
Hi All,
I have a TileView which is not bound to any models.
It should display one row however none are being displayed. Following
is the constructor as a reference.
public pgVoucherListrptCheckInfoTiledView(View parent, String name)
super(parent, name);
setMaxDisplayTiles(1);
setPrimaryModel((DatasetModel) getDefaultModel() );
registerChildren();
initialize();
The problem in the nextTile() method, the super.nextTile allways
returns false. This seems to be because the
TiledViewBase.getPrimaryModel().next() allways returns false.
All the bound tiled views work fine.
Any help will be appreciated .
Thanks
[email protected]
[email protected]
[Non-text portions of this message have been removed]

Crystal Reports 2010 SP1 on IIS 7.0 - Report is not being displayed

Hi,
Finally, the keycode assembly, BusinessObjects.Licensing.KeycodeDecoder.dll error is gone, after I installed Crystal Runtime 2010 SP1. Also, I tested Crystal Report 2010 SP1 on my Windows 32 application and I can tell that I do not have this error anymore and report is being displayed properly.
But Crystal Report is not being displayed on ASP.NET page on MS Server 2008 standard edition SP2 with IIS 7.0. Database resides on iSeries remote machine.
The MS Server 2008 is virtual machine.
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
Simply the report is not being displayed at all. No errors are being recorded in the Event Viewer.
Nothing happens; excerpt the page is Loadingu2026 and Waiting for u2018website nameu2019 in the left lower corner of Firefox web browser.
Here is the code behind aspx page with a command button - very simple:
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
protected void Button1_Click(object sender, EventArgs e)
ReportDocument crReportDocument;
Database crDatabase;
Tables crTables;
// CrystalDecisions.CrystalReports.Engine.Table crTable;
TableLogOnInfo crTableLogOnInfo;
ConnectionInfo crConnectionInfo;
crConnectionInfo = new ConnectionInfo();
//Set server name
crConnectionInfo.ServerName = this._strServerName;
//set database name
crConnectionInfo.DatabaseName = this._strDatabaseName;
crConnectionInfo.UserID = this._strUserID;
crConnectionInfo.Password = this._strUserPassword;
//Set integrated security
crConnectionInfo.IntegratedSecurity = false;
crReportDocument = new ReportDocument();
crReportDocument.Load(Server.MapPath("~/crystal-reports/TransformerLoad/TransLoadMonthlyMax.rpt"));
crDatabase = crReportDocument.Database;
//Set all tables from current report file
crTables = crReportDocument.Database.Tables;
//crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
//Apply schema name to the table's location
foreach (CrystalDecisions.CrystalReports.Engine.Table _crTable in crTables)
crTableLogOnInfo = _crTable.LogOnInfo;
crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
_crTable.ApplyLogOnInfo(crTableLogOnInfo);
//Check if database table name starts
if (_crTable.Location.StartsWith("XFMRSMAX", StringComparison.CurrentCulture) ||
_crTable.Location.StartsWith("XFMRSMIN", StringComparison.CurrentCulture))
//_crTable.Location = this._strSchemaName + "." + _crTable.Location.Remove(8) + Convert.ToInt32(Request.QueryString\"ReportYear\");
_crTable.Location = "XFMRSMAX09";
else
_crTable.Location = _crTable.Location;
this.CrystalReportViewer1.ReportSource = crReportDocument;
This code runs on my development machine Win XP SP3
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
This code also runs on another development server - Windows XP SP3 (IIS 5.1)
OS system has:
Crystal Report Basic Runtime for Visual Studio 2008
SAP Crystal Reports Runtime engine for .NET Framework 4 (32-bit)
ispnet_client folder has IUSR user and this user has read permissions to this folder. I even tried to change the permissions to Read & Execute.
I am developing my reports using Crystal Reports 2008 SP2.
Any help would be greatly appreciated.
Serghei

Hi Ludek,
Thank you for your response.
I checked the web.config file, all http handlers are there. I think the handlers are required to render the images on crystal report viewer but in my case the report viewer is not being rendered.
I have to questions:
1. What exact folders should be under aspnet_client\system_web?
In my case I have structure like this
aspnet_client\system_web\2_0_50727\crystalreportviewers13
aspnet_client\system_web\4_0_30319\crystalreportviewers13
Should I have folders something like this
aspnet_client\system_web\2_0_50727\crystalreportviewers13_1
aspnet_client\system_web\4_0_30319\crystalreportviewers13_1
after I installed Crystal Reports 2010 SP1
Also, in C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET 4.0\Common\Crystal Reports 2011\ there is no folder named as crystalreportviewers13 but instead crystalreportviewers
a.     Should I copy all files from this folder to aspnet_client\system_web\2_0_50727\crystalreportviewers13, or
b.     Should I copy all files from this folder to aspnet_client\system_web\2_0_50727\crystalreportviewers13 and rename this folder to
crystalreportviewers
2. Can you explain how to get a data report?
This is the quote from your previous answer
I'd be interested to see this simplified to a saved data report - no DB logon code - as a test...
Thank you Serghei

Pictures not being displayed on twitter

Certain pictures on twitter are not being displayed on firefox but work fine in internet explorer
an example page is http://pic.twitter.com/flmKKGz8
with firefox there is no piture just the message, when looked at in internet explorer the big pucture under the message can be seen

Hello Cor-el Thanks for the advise, I checked a few things as you mentioned and it turned out that the ad-block add-on was preventing the pictures loading, very strange as it doen't do it anywhere else on pictures, but all rectified now.
Thanks again :)

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

Back up all data. Rebuild the mailbox.

PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!

PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!

What is your operating system? Reader version? Are these local or online PDFs? If online, in what browser?
Can you post a screenshot: https://forums.adobe.com/thread/1070933

Configure Formula dialog not being displayed

Similar Messages

Maybe you are looking for