Configure Grid Contorl to monitor Microsoft Exchange

Hello everyone.
I am having some problems configuring GC to monitor our Exchange environment and was hoping to get some help here.
I am running GC 10.2.0.4. I installed the GC agents on the Exchange nodes.
When I try and configure the portion for "Microsoft Exchange", I get to the screen where I put in the HOST NAME, HOST username and HOST password.
I select the correct servername, but every time I try and set the credentials, it comes back in valid.
I have tried using Domain Admin accounts as well as creating a new local account on the server and dropping it into the local admins group.
For some reason, I cannot get it past that screen.
Anybody run into this? If so, how did you fix it?
Thanks,
Jason

Hello,
I finally found the response : Grid control 11g cannot monitor Exchange Server 2007 or 2010 because they don't support WMI. The plugin uses WMI to connect to Exchange Server.
Oracle have to create a new plugin based on PowerShell.
Thanks Dominik.
Edited by: Dominik on 19 nov. 2010 07:14

Similar Messages

  • Microsoft Exchange Server/Exchange 2010/Mailbox/Database Copy Mounted

    Good Morning everyone!!!
    I Have SCOM 2007 R2 CU5 Envoirnment and i am monitoring Microsoft Exchange 2010 SP1 Messaging infrastracture,
    I have Microsoft Exchange  2010 SP1 Monitoring MP, MP version is 14.2.71.0.
    Case:-
    When exchange is having issue with DAG, SCOM monitoring rule:- KHI: The database copy is not mounted on the local server. Another database copy may be mounted on a different server.
    is generating the alert but alert Description is only "    _ef4a8515_1cc0_48a9_aa12_92ba059a6eae_ " and rest of the things are blank
    and because of this ticketing team is unable to process these alerts,
    Impact:-
    Whenever DAG is unavailable, messaging team is not getting notification and because of this. Exchange services are failing down,
    Does anyone having this kind of issues on their exchange environment?
    I am looking solution for this issue, please let me know if anyone is aware about this.
    Regards, Ganesh M <!> Microsoft MPN - Member =========================================================== Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer
    your question. This can be beneficial to other community members reading the thread.

    Does anyone has updated information regarding Exchange 2010 DAG monitoring fix, <o:p></o:p>
    As i see there was exchange MP release on 31st Aug 2012
    ID
    Name
    Targets
    _ef4a8515_1cc0_48a9_aa12_92ba059a6eae_
    KHI: The   database copy is not mounted on the local server. Another database copy may   be mounted on a different server.
    Root   Management Server
    _EF51D339_22C5_49b3_8B6B_25002BE31D4A_
    KHI: Retry   Mailbox Delivery Queue Length - sustained for 90 minutes - Red(>1) - Hub   Transport.
    Root   Management Server
    _93558cf0_e063_45b1_b57a_0d4b53e0d615_
    KHI: The   Microsoft Exchange Information Store service (MSExchangeIS) isn't running.
    Root   Management Server
    My monitoring is affected for these rules which i mentioned below, here alerts
    information is shown as rule ID instead of Rule name. and we don’t get alert description
    for above rules when the generate alerts.<o:p></o:p>
    Response would be appreciated <o:p></o:p>
    Regards, Ganesh M <!> Microsoft MPN - Member =========================================================== Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer
    your question. This can be beneficial to other community members reading the thread.

  • Exchange 2013 - The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the configured threshold

    Noticed at about noon that no emails had been received all day. Began to investigate and found that the MS Exchange Transport service had been set to deny email submission because it was using too much memory on the server (91%). 
    The error message makes me think that we may have been getting used by malware or something similar.“The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the
    configured threshold.” 
    There are also several warning messages that list particular IP addresses and say that a connection from that IP was denied because there were already the maximum number of connections (20). 
    From what I can tell, all of the IP addresses are from Taiwan. 
    The time period for which some emails may be missing is from close of business yesterday ( 4/3/2014) through about 12:45 today (4/4/2014). 
    From the time I spent reading and trying to figure out the error, I think we may need to readjust our throttling policies to prevent this from happening. 
    The exchange server is currently running at 90%+ CPU and 50%+ memory usage the majority of the time, and I’m not sure how to fix it.
    Also, I cannot get into EMS I get a access denied message from the destination computer. (Exchange server) I want to get into there to change the throttling policy back to default, since we disabled it.
    The Error reads:
    The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer <Exchange> returned an 'access denied' error. Change the configuration to allow Kerberos authentication
    mechanism to be used or specify one of the authentication mechanism supported by the server. (How do I do this?) To use Kerberos, specify the local computer name as the remote destination. (I'm trying to use EMS while logged into the local Exchange server)
    Also verify that the client computer and the destination computer are joined to a domain. (Exchange is on our domain, and the computer trying to connect is the same computer) To use basic, specify the local computer name as the remote destination, specify
    Basic authentication and provide user mane and password. Possible authentication mechanisms reported by server.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
    I assumed control of this exchange system already in place and I do not have much experience with exchange 2013 or server 2012. I do know 2008, but that doesn't help very much in this situation.
    Recent changes to the system:
    About three days ago we switch our sessions policy to allow many more connections, and I believe this caused the issue. This is what I changed it to:
    Made the registry DWORD (32-bit) "Maximum Allowed Sessions Per User" and modified the value to 1000. Location of registry change @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
    I just changed it to 10 from the 1000. I'm hoping this solves this. So far no.
    Also, I am not the best in the shell or command line interfaces. Any help would be wonderful!

    Hi,
    Yes, could be hardware performance issue. Try recycle the Transport process and see if the issue persists.
    Thanks,
    Simon Wu
    TechNet Community Support

  • Configure sharepoint 2013 with Microsoft exchange 2010

    Hi,
    I am want to configure SharePoint 2013 with Microsoft exchange 2010.
    Please let me how can I integrate these server to Send/ Receive domain E-mails.
    Thanks,   
    C Mahone

    For email integration there really isn't anything special about Exchange 2010 vs. any other mail server.  Check the links here on configuring Incoming and Outgoing mail in SharePoint:
    http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • The Type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule1' threw an exception

    Hello,
    I am getting the error message listed in the topic subject when i try to install the Exchange Server 2013 SP1 Evaluation Mode downloaded from your website. After completing all requirements & pre-requisites, I started the installation with the Mailbox
    & Client Access role selected, when i get to the screen which says "Readiness Check" main page subject, and the progress says Configuring Prerequisites, before any progress in the %, i get the error message:
    The Type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule1' threw an exception
    and it says retry.
    Knowing that the server is a member of a domain.How would i resolve this issue?
    Thanks,
    Elie

    hi Ed,
    i am running Windows Server 2012 R2 Standard Evaluation Edition with Exchange Server 2013 Evaluation, But that error message was resolved by removing and re-installing .NET Framework 3.5. That is fine now.
    But now i am getting another error message When it tries to install the Management Tools.
    (Step 1 of 9: Management Tools)
    Error: The Following error was generated when "$error.Clear();
    Set-LocalPermissions
    "was run: "The process does not possess the 'SeSecurityPrivilege' privilege which is required for this operation"'
    knowing that the server is part of a domain and the domain controller runs Windows Server 2008 R2 Evaluation Edition.
    Any ideas why this error message popups up?
    Regards,

  • Readiness Checks fail with "The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception."

    There's another thread about this issue but the accepted answer actually has nothing at all to do with the original problem/question so that's a bit deceptive.
    Anyway, when trying to install Exchange 2013 SP1 (on 2012 R2 Datacentre) the installation reaches the Configuring Prerequisites part of the Readiness Checks and then fails out with the message:
    The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception.
    I honestly can't find any way around this issue and the only mentions I've seen resulted in people reinstalling Windows which obviously isn't really a resolution to the problem.
    Is there any known fix for this issue?

    Ok well I've managed to get around that now by recreating a few registry keys and documented that here (apparently I'm not allowed to create links so can't put that here).
    I have a new issue now though. It seemed to get almost all the way through the installation process but is now failing due to a "memory" issue although due to the wording I can't tell whether it means RAM or Disk space. Either way, neither should
    apply. The drive has 80GB of space available and the machine has 8GB of RAM (only 2GB in use at the time the installer was ran and the amount didn't drop).
    The exact error is...
    Error:
    The following error was generated when "$error.Clear();
    Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
    $FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
    $FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
    Write-ExchangeSetupLog -Info "Loading FipFs snapin";
    Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
    # Copy Microsoft Engine to Engines folder during the install
    $FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
    $MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
    $MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
    $MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
    if(! $MicrosoftEngineExists)
    Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
    " was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
    Error:
    The following error was generated when "$error.Clear();
    Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
    $FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
    $FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
    Write-ExchangeSetupLog -Info "Loading FipFs snapin";
    Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
    Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
    # Copy Microsoft Engine to Engines folder during the install
    $FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
    $MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
    $MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
    $MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
    if(! $MicrosoftEngineExists)
    Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
    " was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
    So if it's not the drive (there's only one drive in the machine) or RAM then what exactly has it ran out of?

  • DCOM was unable to communicate with the computer xyz using any of the configured protocols; requested by PID 7b28 (C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeHMWorker.exe).

    Hi,
    Previously I've two exchange server 2013 named : ABC and XYZ. After is decomm XYZ, i got this error :
    DCOM was unable to communicate with the computer XYZ using any of the configured protocols; requested by PID     7b28 (C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeHMWorker.exe).
    EventID:10028
    Source:DistributedCOM
    May I know the reason why the server keep looking for the non-exist server and how to terminate this process?
    Thanks in advance.

    Hello,
    It seems that error message occurs on the same machine with the previous Exchange Server you have decommissioned. Have you reinstall the Windows System after uninstall the Exchange
    Server?
    You need to check the registry keys but this is not efficient solution. The most efficient way is to reinstall the Windows if it is convenient.
    Thanks,
    Simon Wu
    TechNet Community Support

  • Hi i m using 4s and its updated but i cant configure with microsoft exchange for my gmail account. Anytime i tried to configure it the message comes connection to the server failed. Pls help me out.

    Hi i m using 4s and its updated but i cant configure with microsoft exchange for my gmail account. Anytime i tried to configure it the message comes connection to the server failed. Pls help me out.
    <Email Edited by Host>

    Discontinued by Google. Read here:
    http://googlesystem.blogspot.com/2012/12/google-sync-discontinued-for-gmail.html

  • Error: The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception.

    having problems on new server so I followed instructions to remove Exchange Server 2013 Sp1 using ADSI edit p;er these instructions:
    http://blog.dargel.at/2012/11/20/complete-remove-exchange-2013-using-adsiedit/
    now when I re-run setup for exchange 2013 SP1 I get the error :    
    "Error: The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception."
    David Sheetz MCP

    contrary to what Ed says you can fix this, it is way harder than it should be and I have NEVER had this many issues on a  fresh build! 
    things to note on Exchange 2013
    1. IPv6 MUST work and also DNS set manually, verify port 25 is open on your firewalls!
    2. even if services are running make sure there are no errors in the application event log and check that all services on the Exchange server are set to ACTIVE. to find out type the below command in exchange management shell
    Get-ServerComponentState –Identity servername
    3. The group "everyone" did not have the right "Access this computer from the network". This could be seen by an audit failure in the security log stating that the user
    "<mailbox server name>" did not have the required login type (login type 3).
    Adding everyone to the "Access this computer from the network" right solved the issue. 
    To enable "Access this computer from the network" :
    Run "gpedit.msc"
    Navigate through
    Computer Configuration > Windows Settings > Security Settings > Local Policies > User Rights Assignment
    Double click
    on "Access this computer from the network", and ensure "Everyone" is added.
    4. verify all connectors are setup correctly
    Also I found an error in the event log Event
    ID: 1009 once I fixed that emails started to fly!
    To resolve the issue, use one of the following methods.
    Method 1
    Create a new Active Directory group that is named “ContentSubmitters,” and then grant Admistrators and NetworkService full access to the group. This is a dummy group and should be used as a placeholder only. You might want to add a description so that
    the group is not removed.
    Force or wait for Active Directory replication.
    Restart the following services:
    Microsoft Exchange Search
    Microsoft Exchange Search Host Controller
    Method 2
    You can also resolve this problem by removing a configuration entry that refers to the ContentSubmitters group. This entry is present in four files. Each file is calledWcfConfigurator.xml,
    and you can find each file in the following folder:
    %ExchangeInstallPath%\Bin\Search\Ceres\HostController\Data\Nodes\Fsis\<var style="border:0px;font-family:monospace, monospace;font-size:1em;font-style:inherit;font-weight:inherit;margin:0px;outline:0px;padding:0px;vertical-align:baseline;">NODENAME</var>\Configuration\Local
    Here, “%ExchangeInstallPath%” is the Exchange installation root path (available in the environment variable of that name), and the placeholder <var style="border:0px;font-family:monospace, monospace;font-size:1em;font-style:inherit;font-weight:inherit;margin:0px;outline:0px;padding:0px;vertical-align:baseline;">NODENAME</var> represents
    one of the following names. (There is one name for each of the four files that are to be edited.)
    Helpful articles
    http://blog.dargel.at/2012/11/20/complete-remove-exchange-2013-using-adsiedit/
    http://exchangeserverpro.com/exchange-2013-manually-configure-dns-lookups/
    David Sheetz MCP

  • SAP SMTP Configuration for Microsoft Exchange Online (Microsoft Hosted Solution for Exchange - Office365)

    Dear All,
    We are using Microsoft Exchange Online (Microsoft Hosted Solution for Exchange – Office 365) for sending and receiving emails. Now we want to setup SAP SMTP so that emails / notifications can be sending through SAP via Microsoft Exchange Online. It is quite easy to configure for setting SMTP Services for locally hosted Exchange Server. But this is the first time I am trying to setup for Microsoft Exchange Online.
    Current Instance Profile settings are as follows;
    is/SMTP/virt_host_1                         *:25000
    is/SMTP/virt_host_0                         *:*
    icm/server_port_2 PROT=HTTPS,PORT=44300,PROCTIMEOUT=300,TIMEOUT=600
    icm/server_port_1                           PROT=SMTP, PORT=1080, TIMEOUT=180
    icm/server_port_0 PROT=HTTP,PORT=8000,PROCTIMEOUT=300,TIMEOUT=600
    ms/server_port_0                            PROT=HTTP,PORT=81$$
    SCOT Settings are
    Mail Host             smtp.office365.com
    Mail Port              587
    Following are the settings for configuring Outlook for Exchange Online – Office 365;
    Server name
    Port
    Encryption method
    POP3
    outlook.office365.com
    995
    SSL
    IMAP4
    outlook.office365.com
    993
    SSL
    SMTP
    smtp.office365.com
    587
    TLS
    Please assist if any one configure office365 with SAP.

    Hello Majid,
    Were you able to setup SCOT for Office365 online, I have to setup same.
    Can you help with some guidelines on how you setup.?
    Regards,
    Ashish

  • How to clone Microsoft Exchange Server 2013 configurations from one server to another server?

    Hi! I need help of cloning Microsoft Exchange Server 2013 configurations from my first Server to the second Server. By doing this, the second Server will replace and run as per normal as the first Server is. How can this be done?
    Thanks!

    Cloning an Exchange Server is a very bad idea.  Exchange is very heavily intergrated into Active Directory and this can (and honestly not to sound scary probably will) cause major issues in your environment.  
    Also, since you cannot have 2 servers with the same name in the same domain/network running at the same time you'll need to change the name of one of the servers.   That is a huge no-no with Exchange and requires a complete uninstall/reinstall of the
    product.
    Now requirements differ between environments, but if you are in a scenario where you want to move from 1 Exchange 2013 (or 2010 for that matter) Server to another machine running the same version of Exchange AND (this is a big requirement for the failover
    cluster piece) the Operating Systems of the machines are the same (i.e going 2012r1 to 2012r1 or 2012r2 to 2012r2 and not 2012r1 to 2012r2) you can do what Brenle suggested with the DAG and DB copies. If the Operating System of the new machine is different
    (2012r1 to 2012r2) then you will will not be able to use a DAG, and will need to perform mailbox moves to move between servers.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

  • How to configure email through microsoft exchange server

    Curve 8520 with vodafone

    Instructions
    1 Click the “Full Menu” button located to the immediate left of the trackball.
    2 Click the “Settings” icon in the Full Menu.
    3 Click the “Setup Wizard” icon on the Settings page.
    4 Click the “Email Setup” link in the Setup Wizard.
    5 Select the first radio button labeled “I want to create or add an email address.”
    6 Click the “Next” button twice.
    7 Type the email address for the account on the Microsoft Exchange Server in the first input box.
    8 Type the email account password provided by the email administrator.
    9 Click the “Next” link. The device will attempt to access the email account on the Exchange Server and download items. If connection is successful, the email account has been successfully added to the Blackberry.
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • Error while installing exchange2007 : Unable to initialize the Microsoft Exchange Information Store service. Failed to find the

    Hi,
    I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
    Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
    the installation log says
    6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
    [6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
    [6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
    [6/5/2007 3:14:05 PM] [2] Beginning processing.
    [6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
    [6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
    [6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
    [6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
    [6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
    [6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
    [6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
    [6/5/2007 3:14:15 PM] [2] Ending processing.
    [6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
    [6/5/2007 3:14:15 PM] [1] 0.  ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
    [6/5/2007 3:14:15 PM] [1] 0.  ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
    [6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
    [6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
    [6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
    [6/5/2007 3:14:15 PM] [1] Ending processing.
    [6/5/2007 3:14:18 PM] [0] End of Setup
    [6/5/2007 3:14:18 PM] [0] **********************************************
    this I am trying on my test system please help me out in resolving the issue
    thanks in advance,

    Gary,
    Open Registry Editor.
    In Registry Editor, navigate to the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
    Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
    Make sure you back up the registry before you do any changes on it.
    Raj

  • The connection to Microsoft Exchange is unavailable

    Environment: Windows 7 Pro 64bit
    Setup: Fresh install of Office 2010 64-bit from office 365 web site on a fresh install of Win 7 Pro 64bit.
    Issue: I first launched Outlook and tried to link a new account to the client by putting in my email address and password.  It seemed to take it, but a new dialog box keeps poping up asking me for my password (it shows the email address
    already filled in).  It acts as if it does not like my password, but I know it is correct because I can log in and get my mail through the web access.
    When after 5 or 6 tries, I press cancel, I get the error message  " The action cannot be completed. The connection to Microsoft Exchange is unavailable.  Outlook must be online or connected to complete this action."  Then I get a
    dialog box listing the Microsoft Exchange Server and Mailbox.
    Steps to resolve:
    I am at a total loss on how to resolve this issue, is there anyway to manually connect to M.E> as it is just saying the connection is unavailable.  All of the other threads dealing with this issue have been no help.  I can sign into my account
    at login.microsoftonline.net so I know the account is valid.  I also receive email to my iPhone with the account and server.  Any advice would be wonderful.
    I went into Control Panel ->Mail, and deleted the profile.  Then I tried to create a new profile and I got the same results as the first time through Outlook directly.  Also, this is Windows 7 64 and office 64, but in Control Panel, it says
    Mail(32bit).  This is a completely new install so I don't know why it is not working.  I have performed this exact same install on a dozen machines over the last 2 years without a single hitch.
    I checked my DNS records and everything seems to check out.  I haven't changed anything in DNS for over a year.
    I am out of the office so I cannot copy some of the registry entries as some of the other posts recommend.
    I ran remote connectivity analyzer.  I don't know what it is saying, but below are the things that seemed to be irregular:
    1) Attempting to test potential Autodiscover URL https://X123.com:443/Autodiscover/Autodiscover.xml
      Testing of this potential Autodiscover URL failed.
    2)Testing TCP port 443 on host X123.com to ensure it's listening and open.
        The specified port is either blocked, not listening, or not producing the expected response.
    Any help would really be appreciated.
    Tom

    Hi Tom,
    Please manually configure your Office 365 account in Outlook 2010 to check whether the issue persists. About how to manually configure Outlook for Office 365 account, please refer to:
    http://blogs.technet.com/b/hot/archive/2012/02/06/how-to-manually-configure-outlook-office-365.aspx
    If the account can be manually configured but can’t be auto-configured by using autodiscover, please open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar - Test Email AutoConfiguration. Put your email address -
    uncheck use guessmart and secure guessmart authentication - click Test to check your Autodiscover service. If possible, please post the
    Results tab and Log tab here for further troubleshooting.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Emails for Current Day are not sync with Microsoft Exchange server

    I have bought a Z1 and configured my microsoft exchange server email on it. All is working well. However it is only showing emails till yesterday. I have tried all sync settings including automatic, all, one day and all others but still it is not showing emails for current day. I have also tried all sort options but still no improvement.
    The same setting are working perfectly fine on my Samsung Galaxy Note 2. What is the issue and how to fix it? Please make sure i have purchased a new phone and would use the stock email app and no third party email app. 
    Already there is a downgrade in Z1 stock email app. It is not supporting formatted signatures and formatted outgoing emails. Which is now very common on all phones of its price and class. 
    What is Sony doing on its phones? i do not understand.
    Please let me know how to fix my issue of most recent emails sync.

    http://office.microsoft.com/en-us/support/set-up-email-on-an-android-phone-or-tablet-HA102823196.asp...
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Maybe you are looking for