Configure IIS 7.0 in 64-bit OBIEE 11.1.1.5

We are installing OBIEE 11.1.1.5 in a brand new server ( Windows 2008 R2 Standard 64-bit). We were able to configure successfully IIS 7.0 for Console and EM. And these can now be called using the url http://localhost/console and http://localhost/em. But when we configure for analytics, it is not working. The message thrown when accessing http://localhost/analytics is "Error 404--Not Found " . Did any one face this issue before? Is there any additional step that is needed for configuring analytics when compared to console and em?

Thanks for the response. We had referred this very same document. And we were able to configure successfully weblogic console and enterprise manager. But if we use the same method, analytics is not working. It states that this virtual path itself is not found. Is this somehow related to saw.dll? Do we need to perform some additional setup for the same? Below is the exact message when http://localhost/analytics is referred
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

Similar Messages

How to configure IIS for SAP BO 4.0 - installed in different server?

I have installed:
Server Nr1 SAP BusinessObjects BI-Platform 4.0 in a 64 Bit Version and Server Nr2. IIS also 64 Bit Version.
(BO and IIS are not running in the same Server)
I have no idea to configure IIS. Can someone of you tell me the steps that are to do ?
Thanks a lot.
Regards

Hi Qamile,
You can't. IIS is only for integration with Sharepoint portal server. Check the supported platforms guide. Only Java web application servers are supported.
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/10ccbdf2-139f-2e10-61a0-d4af67b6257b
Regards,
Julian

INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes.

Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
Below are details of my pc.
OS Name    Microsoft Windows 7 Professional
Version    6.1.7601 Service Pack 1 Build 7601
Other OS Description     Not Available
OS Manufacturer    Microsoft Corporation
System Name   ...........-HP
System Manufacturer    Hewlett-Packard
System Model    HP ProBook 4530s
System Type    x64-based PC
Processor    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date    Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
SMBIOS Version    2.6
Windows Directory    C:\windows
System Directory    C:\windows\system32
Boot Device    \Device\HarddiskVolume1
Locale    United Kingdom
Hardware Abstraction Layer    Version = "6.1.7601.17514"
User Name    ...........-HP\................
Time Zone    South Africa Standard Time
Installed Physical Memory (RAM)    4.00 GB
Total Physical Memory    3.94 GB
Available Physical Memory    1.00 GB
Total Virtual Memory    7.87 GB
Available Virtual Memory    1.25 GB
Page File Space    3.94 GB
Page File    C:\pagefile.sys

To clarify further.... It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine. In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows. If you are using a 64bit OS, you must install the 64bit software. Again, this would include Forms/Reports, WLS, and JDK

Can 32 bit OBIEE 11.1.1.5 be installed on a 64 bit windows machine?

We're having LOTS of problems getting the install of 64 bit 11.1.1.5 to work. Just as a curiosity - is it possible to install 32 bit OBIEE 11.1.1.5 on a 64 bit Windows 2008 server?
Thx,
Scott

Got you, and thanks for that clarification. You want the Premiere - Premiere Pro CS4 & Earlier Forum. Not sure of the answer, but someone there can help you.
Good luck,
Hunt
[Thread moved from Premiere Elements Forum]

How to: configure IIS 6.0 (w2k3) to fwd HTTP requests to SJSAS (PE) 9.0

Hi all,
My question is this; can Microsoft IIS be configured to redirect/fwd HTTP requests Sun Java System Application Server PE 9.0?
I'm looking to switch over to SJSAS (PE) 9.0 from a mainly Apache Tomcat based setup. Within the current setup i'm able to configure IIS (6.0) to redirect (passthrough) HTTP requests (via port 80), to a Tomcat instance running via another port (9090) to avoid server conflict. Within Tomcat this is achieved by using an ISAPI redirect filter (e.g. JK2, isapi_redirect.dll).
Having read through the available docs (for 9.0) and performed the usual trawl of forums and web in general i found a number of references to the configuration of Microsoft IIS to forward HTTP requests to SJAS 9.0 for the purposes of setting up load balancing and clustering. Everything i've seen so far points to the use of an ISAPI filter (sun-passthrough.dll) however whilst this appears to come bundled with earlier (pre 9.0) versions of SJSAS i could find no trace of it in the SJSAS (PE) 9.0 install dirs.
I then stumbled across this (http://www.theserverside.com/news/thread.tss?thread_id=31701#156874) reasonably old TheServerSide.com forum post that seems to say in fairly certain terms that the sun-passthrough.dll (referred to in the post as the 'Load Balancer Plugin') only comes bundled as part of SJSAS 9.0 Standard and Enterprise Editions. Is this still the case?
Is there any way of setting this sort of thing up (IIS -> SJSAS (PE) 9.0 redirect) without having to either install Sun Java Web Server or find some clunky hack/workaround for IIS?.
NOTE: Switching off, changing port # or uninstallation of IIS are not currently options, as we have a number of ASP.NET 2.0 based development sites/services running on the box as well.
Hope the questions clear enough and that someone can help.
Many thanks,
Simon Abele

You can use proxy plugin for IIS - it is the same one for appserver 7.x and 8.x. I believe it should work for appserver 9.x as well.
Here is the docs: http://docs.sun.com/app/docs/doc/819-2555/6n4r9qo8g?a=view
and the plugin could be downloaded here:
http://www.sun.com/download/products.xml?id=445bec65

Configuration IIS to increase upload size limit

When I am upload larger than 30mb file to Vibe, it show HTTP 404 and the page cannot be displayed.
I am check the vibe documents know that that need configuring IIS to allow uploading of large files to the vibe site
However, I don't understand the instruction on this article
For information about how to configure IIS to allow you to upload large files, see article 925083 in the
Microsoft Support Knowledgebase (http://support.microsoft.com/kb/925083).
Firstly I can't locate the Web.config file. By default folder is Inetpub\wwwroot\wss\VirtualDirectories\VirtualDire ctoryFolder
If I follow vibe installation guide to setup, virutalDirectoryFolder should be under C:\Program Files\Novell\Vibe IIS Plugin. But I can't find any Web.config file. Cloud you help.
Thanks

yuenc,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

How to configure IIS

Dear all,
I am trying to configure IIS server in form 6i environment.
Please help to make it.

As far as i know forms run with oracle application server, not with microsofts IIS. what exactly do you want to configure?

How to configure IIS webserver with weblogic so that I can invoke servlets without the .wlforward extension

How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter and .wlforward
has also been
included as a special file type. However this requires me to key-in ".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

I am able to invoke the servlet without the wlforward extension now.
However, now I am required to add /weblogic before the servlet
name otherwise it does not execute the pathtrim property.
I have tried with the pathprepend thing also.
Can we get rid of the /weblogic part also. I just want to execute
my servlet as http://iis/myServlet.
Your help in this regard is greatly appreciated...
Thanks..
"Rishi" <[email protected]> wrote:
>
Thanks for the reply Kumar.
I did follow the instructions as given in the Weblogic documentation
The documentation said to add iisforward.dll as a filter service
and register .wlforward as a special
file type to be handled by iisproxy.dll. For this,
while configuring the IIS server in the Home Directory tab
I added an extension ".wlforward" and the executable as
iisproxy.dll. Is this the way it should have been done...
I also modified the iisproxy.ini file as per the documentation.
I have added the WLForwardPath property and set it to /weblogic.
My server works fine when I give the url as
http://iis/myServlet.wlforward
but it does not work for
http://iis/myServlet and this is the way i'd want it to work.
Please tell me if I am missing something on the configuration part
and if there is something special that needs to be done. I shall
be grateful to you.
Kumar Allamraju <[email protected]> wrote:
http://e-docs.bea.com/wls/docs61/adminguide/isapi.html#101184
Rishi wrote:
How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter
and
.wlforward
has also been
included as a special file type. However this requires me to key-in".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

Cannot publish OSB Configuration project on windows 7 64 bit OSB 11g1

I get the following error when I try to publish a OSB configuration project:
Project Facet Oracle Service Bus Configuration 1.0.100 is not supported by this server.
I installed OSB 11gr1 the following way:
1. downloaded + installed 64 bit windows Java JDK (1.6.0_20)
2. downloaded and installed the generic installer weblogic + coherence ( without OEPE unfortunately) [filename=wls1033_generic.jar].
3. Seperately downloaded 64 bit OEPE from http://www.oracle.com/technology/software/products/oepe/index.html. Unzipped it in a manually created directory oepe in the weblogic installation directory (C:\bea\oepe) [filename=oepe-galileo-all-in-one-11.1.1.5.0.201003170852-win32-x86_64.zip]
4. Install the OSB by running the setup.exe from the osb installer (Disk1). During the install I selected the OEPE directory (C:\bea\oepe in my case).
[filename=ofm_osb_generic_11.1.1.3.0_disk1_1of1]
5. I Started eclipse.exe. The OSB plugins were put in the installment automatically during startup (dropins).
I created a test domain and within eclipse I created a server (Oracle WebLogic Server 11gR1 PatchSet 2=10.3.3) so I could deploy projects onto this server. All went well. After this I created an OSB configuration project and an OSB project. When I tried to add this to the server I got the error as I mentioned above. This surprises me. The eclipse OSB plugins that were installed cannot create an OSB Configuration Project for the 10.3.3 version. So I cannot use eclipse to build project for the latest version. What is happening here?!?
Can somebody enlight /help me.

Although windows 7 is not officially supported I got something working. No garantees it will break at some point you can have a working 64 bit OSB on windows 7.
To get oepe also working you have to install the 32 bit version from the 32 bit weblogic installer. When you have supplemented this version with the OSB plugins you can publish projects on Oracle WebLogic Server 11gR1 PatchSet 2.
So try at your own risk or wait for an official version for windows 7

Windows 64-bit + OBIEE 11g + Internet Explorer 10

Not a question this time, just an observation about the interaction between OBIEE 11.1.1.6.0 and IE 10 on 64-bit Windows.
After installing OBIEE 11.1.1.6.0 on 64-bit Windows, the Analytics environment worked fine in IE 10. When starting BI Services from the Start menu everything was fine.
Prior to installing any patch sets, I installed the two Windows Services (Admin Server, Managed Server). At that point, the Analytics environment on Internet Explorer 10 would not work properly (Firefox was fine).
- The login screen has the User and Password fields all the way on the left of the screen, but I am able to log in to analytics.
- Clicking New...Analysis does nothing. No subject area list, no blank field where a list should be, just nothing. It's like clicking on air.
- Selecting Administration ... Manage Privileges takes me to the correct screen, but there is no scroll bar on the right side.
I accessed Programs and Features ... Installed Updates, and Uninstalled Windows Internet Explorer 10. This rolls IE back to IE 9.
After restarting the machine, Analytics 11.1.1.6.0 works just fine in IE9.
After installing the 11.1.1.6.9 patchset, Analytics still works just fine in IE9. After reinstalling IE10, Analytics is back to its same broken state.
Takeaway: Don't use IE10 with OBIEE 11g (at least through the 11.1.1.6.9 patchset) on 64-bit Windows.

Yup, same here using OBIEE 11.1.6.6 on Windows 7 64bit with IE 10. I do get the scrollbar in 'Manage privileges', however as a trade off my catalog will not load: the left tree only shows 'Shared Folders', the main screen does not load any of the content (just and endless loading animation), and both the 'open' and 'favorits' drop down menu remain empty.

Configuring IIS to work with Tomcat - I can't find a good help document

Hello All,
I am relatively new with Java and I am just now trying to learn Tomcat and servlet technologies. I can get the servlets working on my personal computer, yet I cannot get it configured for the server. From all the forum posts and web sites I have researched, it is my understanding that there is a configuration process that needs to be done to allow IIS to request the Tomcat servlet. However, maybe I'm just plain dumb, but I can't understand all the how-to's that I have found.
I am assuming I DLed the appropiate .dll file and I placed it in Tomcat's bin folder.
But then I have to create a properties file? I have no clue how to do this.
I am still messing with the instructions, etc., but if anyone has any suggestions, or maybe a link to a dummie-fied How-to page, that would be extrememly helpful.
I am currently running IIS on a win2k server.
Thanks guys.
(btw, for people who are having trouble setting the environment variable, with win2k, I was trying to do it with DOS, and it did not work. However, using the control panel > system > I was able to do it and the setting "stuck")

No, you don't need Apache to make Tomcat work with ISS.
There's a Wrox book entitled "Professional Apache Tomcat" that has a chapter on how to mate Tomcat with IIS. It gives step-by-step instructions that I've followed successfully a number of times.
There are a few Tomcat books on the market now. I'd be surprised if they didn't address this. Go to Borders and pick one up. - MOD

SCOM must required to configure IIS MP and NLB MP ?

Environment
Currently I am trying to monitor application health under the Windows NLB environment. For this I have found the below MICROSOFT link:
http://www.microsoft.com/en-us/download/details.aspx?id=9815&751be11f-ede8-5a0c-058c-2ee190a24fa6=True
The above mentioned MICROSOFT link states that it is possible to monitor the following:
The IIS MP provides monitoring of the following objects:
Web Sites
Application Pools
FTP Servers
NNTP Servers
SMTP Servers
So finally my problem is resolved. But I have a query:
QUERY
Is it must to have SCOM in the environment or we can configure the IIS MP to monitor the health of Web Sites and Application Pool without SCOM ?
Any comment will be appreciated. Thanks. Zahid Haseeb.

Hi,
MP is Management Pack and it is the component of SCOM. Therefore, you need to deploy SCOM in your environment to use MP.
Using Management Packs
http://technet.microsoft.com/en-us/library/hh212709.aspx
If you have question about MP and SCOM, it is recommended to post in SCOM forums.
http://social.technet.microsoft.com/Forums/en-us/home?category=systemcenteroperationsmanager&filter=alltypes&sort=lastpostdesc
Best Regards.
Jeremy Wu
TechNet Community Support

Cannot configure IIS at port 80 as Apache server already running at 80

I have to install BAM in a PC in which Apache server is already running in port 80. So IIS cannot run at port 80. How can i configure BAM to use a different port of IIS ??
Please suggest...

Change 2 config files:
1) OracleBAMEventEngine.exe.config
Change value to include port number:

<add key="WebServerName" value="SERVERNAME:PORT" />
This will ensure it makes a correct service call necessary for notification.
2) Web.config
Change value to include port number:
<add key="ApplicationHostName" value="SERVERNAME:PORT" />
(This is referred to in the Installation guide if you choose to use another port number other than 80 or 443)
Also, change this value to include port number:
EventEngineServerName: EventEngine server machine name that DNS resolves to IP address,
or simply IP address use "localhost" for remoting to the current box
-->
<add key="EventEngineServerName" value="SERVERNAME:PORT" />
-michelle

How configure IIS MP in SCOM

Environment
Active Directory = 2008R2
SCOM = 2007R2
SCOM agent = Installed on both NLB nodes
NLB nodes = two
NLB nodes OS = 2008R2
IIS MP = imported
Query
I am accessing default page of IIS successfully. When I stopped the Default Application Pool, the client request keep going to that NLB node. Why the client request is not directing to other NLB node ?
Is there something really big which I am missing ?
What should I need to configure ?
Any comment will be appreciated. Thanks. Zahid Haseeb.

Hello,
IIS related questions are better asked in http://forums.iis.net/
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Configure IIS on DMZ Server

We've been asked to publish SharePoint (2013) on the internet. Because of the way our network is set up, we have to put a server in our DMZ that takes that traffic and forwards it on the SharePoint server. We can't put the SharePoint server in the DMZ and
we can't route or NAT outside traffic directly to the SharePoint server.
I don't have to worry about the network settings, subdomain registration, public IP's etc. since our network management team will take care of all of that, what I need is some ideas on how I can setup IIS on the DMZ server to forward the traffic to
the SharePoint server.
Thanks

Hi,
According to your description, what you need is “forwarding request”. So you may need a proxy server.
You can use Web Application Proxy or Application Request Routing.
Web Application Proxy is a new Remote Access role service in Windows Server® 2012 R2. Web Application Proxy provides reverse proxy functionality for web applications inside your corporate network to allow users on any device to access them
from outside the corporate network. Web Application Proxy pre-authenticates access to web applications using Active Directory Federation Services (AD FS), and also functions as an AD FS proxy.
Application Request Routing (ARR) is a proxy-based routing module that uses HTTP headers, server variables, and load balance algorithms to determine how to forward HTTP requests to content servers.
To install and configure Web Application Proxy for publishing internal applications, please refer to the article below,
Installing and Configuring Web Application Proxy for Publishing Internal Applications
http://technet.microsoft.com/en-us/library/dn383650.aspx
To install, configure, and use the ARR module, please refer to the article below,
Application Request Routing
http://technet.microsoft.com/en-us/library/ee683905(v=ws.10).aspx
Hope this helps.
Steven Lee
TechNet Community Support

Configure IIS 7.0 in 64-bit OBIEE 11.1.1.5

Similar Messages

Maybe you are looking for