Configure & integrate the quality management with production planning

hi,
i know general flow of production planning ,
i dono how to configure & integrate the quality management with production planning . can anyone explain step by step to configure.
with regards,
Elanchi

Hi,
You must define an inspection type 03 and activate it for materail. When you create production order you will have the inspection lot created. you define type of inspection plan in inspection lot type. You will insert an operation in routing og the material. This operation must contain inspection characteristics. use the operation key QM04 with a quality work center.
Inspection process time will be assigned to your production order.
I think you can manage t customise the process from this global definition of the QM process in Production.
Best Regards,
Salih Arslan
SCM Functional Consultant
Zeitine Solution Partners

Similar Messages

How can link the accosaries requirements with production planning

"I am in cable manufacturing here i have a problem in accessories requirements ( dies,Nozzles,Rollers,Embossing wheels etc )link with production planning,at the time of production than these material required for production Can any body tell me how to link this ,accessories is not consubles "
Thanks,
Anurudh singh

Yes you can use PRT for these requirments,
Logistics - Production Process - Master Data - Production Resources/Tools - Production Resources/Tools - Equipment - Create.
spro->production planning for process industries->master data->production resources/tools (PRT)
you will see 5 transactions to configure your settings:
-define PRT auth.grps
-define PRT status
-define Task List Usages
-define PRT Group Keys
-Define Overview Variant for Where-Used List/Mass Replacement

A Quality report as a tool for the Quality management of Web services

Hi everybody,
I would like to explain and discuss my current research project with you:
The differentiation from competitors is crucial for the economic success of a product. This differentiation can be achieved in addition to price and the date of the market entry through the product quality. To differentiate the quality of products, it is necessary to distinguish between several relevant product characteristics, to determine their values, to evaluate these values and to relate this evaluation to the evaluation of other products. Techniques for the determination of the quality of a product are used in many areas of the quality management, e.g. in the quality assessment.
Web Services are software systems supporting a machine-machine interaction over a network. Web services are often used as modules in different software architectures, especially in Service-oriented architectures (SOA).
In the course of quality management of a Web service applied in software consequently needs appropriate procedures and quality models as means to determine the quality. As there is a lack, research is needed in this field.
In order to eliminate the described deficit, a procedure is to develop that helps to determine the quality of a Web service. A report is conceivable which integrates all relevant views, all influences on the quality and all phases of the life cycle of a Web services.
During the research a lot of similarities between Life cycle assessments of environmental management and the quality management have been identified. These similarities include e.g. principles, procedures and the terminology. Since the Life cycle assessments relate on the product life cycle, on the stakeholders and on all relevant product characteristics, an adaption of the method on the quality management of software seems to be promising.

I would like to answer the following two research questions:
- Is it possible to adapt the principles and procedures of Life cycle assessment and Sustainability reporting to the quality management of Web services?
- Is a quality report based on these findings an appropriate tool for quality management?
Do you have any experiences with the quality management of Web services? Which procedures do you use to determine the quality of Web services? How are your experiences with that procedures? Where are their weaknesses?
Edited by: Bastian Grabski on Jan 7, 2010 11:36 AM

Document for configuration of the spend management in SAP E-Sourcing

Hi All
Is there any document for configuration of the spend management in SAP E-Sourcing 5.1
I have checked the RG section of the application and also all the documentation delivered as a part of the ESO software download
Unable to locate this, request you to redirect me to the link on the service marketplace from where I can download this, as far as I know, its not available there.
Currently I get the following error mentioned below for every menu option clicked under the spend and Compliance Tab
Error: The spend analysis environment is not ready to provide spend data
Request feedback
Regards
Tridip

Hi Kamalakar
This is great piece of information, I checked the same place i found the following
Module Name
Auctions License
BOM License
Contracts License
Demand Aggregation License
Frictionless SRM Product License
Optimization License
Projects License
RFQuick License
RFx License
SRM Explorer License
XPress Print License
Do you think am missing the spend license, whats that called, request you to let me know
Regards
Tridip
Edited by: Tridip Chakraborthy on Apr 15, 2009 8:48 PM

CAD send metadata to Quality Management with chinese string

Hi everybody,
       I'm facing a problem is when I want send a metadata to the Quality Management for a recording, it's failed when the metadata include Chinese string, the error reason is "Tried to read incomplete UTF8 decoded String". And I believe the database of QM is support for Chinese string because I can change the metadata field in the database to Chinese string manually.
       Does anybody know how to send Chinese string to the Quality Management?
       The attachment is screenshot for the error and the result when I change database field into Chinese manually.
       It's really need somebody can help me to resolve this problem.
Best Regards.
Tony.Ye

Hi James
I've done an RSPAN deployment with UCCX recording which I presume will have similar gotchas...
The only issue I had was that I ham fisted an RSPAN config in that SPANned the VVLAN on all the edge switches. My mistake was that I didn't exclude the uplink ports, and these switches were stacked, so there was a lot of packet duplication initially (sounds like 90s dance music time stretching).
If you ensure you SPAN ingress only on all the endpoints (i.e. phones, and gateways) and then exclude any ports where traffic might be seen a second time (e.g. switch uplinks), and then filter for the voice VLAN you should be OK.
This deployment was a routed LAN with different subnets on each edge stack but this worked OK with everything running through a single RSPAN session back to the server.
I've not had the good fortune to have to do this more than a couple of times, and I've not done it for AQM - but assuming that SPAN/RSPAN are supported along with the video recording part running on the endpoints I don't see it being too different as they seem to be written by the same people.
Can't help re: VMware view either I'm afraid...
Aaron

Quality Management with SAP

Hi Experts,
Can anyone give me Xerox of this book :- Quality Management with SAP (by M. Holzer (Author), M. Schramm (Author)
thanks
Utkarsh

You can directly download from
[http://www.sap-press.com/product.cfm?account=&product=H1902]
OR
[http://www.amazon.com/Quality-Management-SAP-M-Holzer/dp/1592290515]
Regards,
Shyamal

Find "configuration" in the screen "Manage"

Problem:
Where can I find the "configuration" in the screen "Manage"?
http://technet.microsoft.com/en-us/library/jj193512.aspx

The first step says to right click on Computer in the start menu and pick manage. Since you are using Server 2012 there is no start menu. In the Server Manager dashboard in your screenshot click on the Tools menu and select 'Services'. You
will see the same list of services that you would see in the Technet instructions. The path is just a little different in Server 2012.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Rogers is saying that IOS4 won't allow use of the personal hotspot with a plan of less than 1GB data. I say it's a policy of theirs, not an iOS restriction. Anyone know the truth?

Rogers is saying that IOS4 won't allow use of the personal hotspot with a plan of less than 1GB data. I say it's a policy of theirs, not an iOS restriction. Anyone know the truth?
I call BS but the tech guy was insistent that the iPhone can detect what plan I have and won't enable the feature and there's nothing they can do about it, short of selling me a larger data plan...

robfromkelowna wrote:
Actually it does. It's wrong to lie to a customer. By blaming Apple, they shift the blame and make it seem like there is nothing they can do about it. If they admitted it was their policy, I could complain and try to get it changed or I could move to another carrier.
If a person killed someone and blamed it on a heart attack, the person is stil dead, does it matter? Either way they're dead, right... (extreme, I know, but illustrating a point)
Wow.
It is certainly Rogers policy and is not unusual at all among carriers.
Seems like a non-issue to me, but apparently being "lied to" ( perhaps the employee was simply mistaken, it happens) is a major deal to you.

UCCX Advanced Quality Management with VMware View

Hi,
I have a customer who uses UCCX 8.5 with VMware View clients running CAD and 7940 IP phones.
They are looking at recording options and have expressed an interest in the Advanced Quality Management product.
There are a few issues that I would need to consider specific to their environment.
The first is that Desktop based recording would not work in this environment as CAD is running on a virtual desktop rather than a PC daisy chained to the IP phone. The second is that network based recording is not supported as the 7940 phones do not have a Built in Bridge.
This leaves server based recording which uses SPAN port mirroring. The issue with this is that the agents phones are distributed across multiple Catalyst switches so I guess I would need to configure RSPAN - has anyone got any experience of using Cisco QM with RSPAN? - if yes how well did it work? - the customer would probably be willing to upgrade the IP phones used by the agents if that would be a better option.
The final query relates to the Screen Recording Client - the install guide details how to install this on a Citrix server but makes n mention of VMware view. Does anyone know if support for this is on the roadmap?
Thanks!

Hi James
I've done an RSPAN deployment with UCCX recording which I presume will have similar gotchas...
The only issue I had was that I ham fisted an RSPAN config in that SPANned the VVLAN on all the edge switches. My mistake was that I didn't exclude the uplink ports, and these switches were stacked, so there was a lot of packet duplication initially (sounds like 90s dance music time stretching).
If you ensure you SPAN ingress only on all the endpoints (i.e. phones, and gateways) and then exclude any ports where traffic might be seen a second time (e.g. switch uplinks), and then filter for the voice VLAN you should be OK.
This deployment was a routed LAN with different subnets on each edge stack but this worked OK with everything running through a single RSPAN session back to the server.
I've not had the good fortune to have to do this more than a couple of times, and I've not done it for AQM - but assuming that SPAN/RSPAN are supported along with the video recording part running on the endpoints I don't see it being too different as they seem to be written by the same people.
Can't help re: VMware view either I'm afraid...
Aaron

Configuration of the Import Manager in order to use the Import Server

Hi all,
Firstly thanks a lot for all. The question is: I need to set all the properties neccesary to use the Import Server, so would be very positive to know how to set all the default import action in the import manager. when I try to make that all default import action under the Records Option in the main menu are disable.
Can someone help me with that?.
Thanks in Advance and Best Regards.

Hi Devashish Bharti
All that you have told is configured, instead of this configuration, the default import action: none/none;single/exact is disable in the "Records" main menu. Do you know what happen?
Best Regards.

Configuration Guide Job Scheduling Management with SAP Solution Manager

Dear Gurus
Could you please help me with the configuration guide of the Job Scheduling Management with SAP Solution Manager
Best Regards

Hello Luis,
the configuration activities can be accessed via the "Implementatiopn Guide" by calling transaction SPRO in your SAP Solution Manager system.
In SPRO navigate to -> SAP Solution Manager -> Scenario-Specific Settings -> Job Scheduling Management -> Standard Configuration and execute the following two activities.
1. Activate Solution Manager Services
2. Set Up Work Center for Job Scheduling Management
Make sure that your user has role SAP_SM_SCHEDULER_EXE (or_ADMIN) assigned.
Afterwards you should be able to access the Job Management Work Center and to create Job Documentation or to import Jobs from a Managed System into new Job Documentations.
The following SAP notes might be usefuly as well:
1054005 - FAQ on Job Scheduling Management
1117355 - Work Center roles
Kind regards,
Martin
http://service.sap.com/jsm

Quality Manager with Contact Center Enterprise (not Express)?

Is Quality Manager (part of the Workforce Optimization package) supported with Contact Center Enterprise? The documentation focuses on Express only.
Thanks,
Tom

You buy QM Enterprise direct from Calabrio, and QM Express from Cisco.

Cisco Unified WFO - Call Recording and Quality Management with Extension Mobility agents

Hi All,
We're considering Cisco Unified WFO - Call Recording and Quality Management for a customer running UCCX 8.0, agents on multiple WAN sites, all agents using extension mobility.
The documentation I've been able to find describes three different recording methods:
Using Desktop Recording service (Endpoint) to record from an agent’s desktop.
Server Recording - Uses SPAN (not so good for remote sites)
Network Recording - Uses CUCM recording service / SIP trunk / phone's built in bridge.
Network recording or Desktop recording should be suitable for the customer but it seems that Extension mobility is not supported. Extension Mobility is not mentioned in the 8.5 installation guide, it is mentioned as ‘not supported’ in the 8.0 guide as follows:
'Server Recording and Network Recording have the following limitations:
• Extension mobility is not supported.'
Neither version's documentation specifically mention extension mobility in relation to the desktop recording method, though I realise this is a similar approach to the 'server recording' method.
So the question I have is: Is extension mobility supported in any way on version 8.0, or version 8.5 for recording? And if so which recording method(s) are supported?
Thanks,
Jonathan

Hi,
I had more luck asking questions over at the Calabrio forum - they make the software and Cisco re-brand a version of it - there is some good info on their portal (http://portal.calabrio.com), you have to register but it's fairly painless. The answer I got was:
"QM Desktop recording has always supported extention mobility as it determines the recorded user by the desktop user's login. Extention mobility was not supported for Server and Network recording until the Calabrio QM 8.6.2 release in April 2011 and will be added to Cisco QM starting with QM 8.5.2 in June 2011"
Regards,
Jonathan

Demand Management with Production Versions

Dear all,
Is it possible to link the requirements in Demand Management with a production version which I've listed in the MRP 4 view?

Hi,
Yes it is possible. In MD61 when you place independent demands, switch to the schedule line view & specify which Production Version you want the demand to consider.
Hope the above clarifies.
Regards,
Vivek

Field names for the following information in Production planning (PP)

Hi Experts
I am BI consultant, and I need the field name for 'actual production quantity' in the PP module, and also what is the difference between - Actual production Quantity, Actual Component Quantity (0WITHDRWQTY), and Actual Quantity (0CONFIRM_QTY) in the PP module.
with regards
Ajay

Hi,
Please find the production order details in the below tables:
AUFK - Order Master Data
AFKO - Order header data PP orders
AFRU - Order Confirmations
AFVC - Operation within an order.
Hope it helps you.
Regards,
Alok Tiwari

Configure & integrate the quality management with production planning

Similar Messages

Maybe you are looking for