Configure internal number for document in "depreciation run"

Hi Experts!
When I execute "Depreciation Run", it notice error:
Create document number range 03 using internal number assignment
Message no. AA776
Diagnosis
Processing terminated because the document number range 03 for year 2008 was set up with external number assignment.
System Response
For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
Procedure
Change the number assignment for the number range 03 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
Please tell me the way to configure internal number for document in "depreciation run"
Thanks & Reguards
Ngocpt.

Hi,
Go to transaction code FBN1
In the change option go to document range 03.  IF its an external number assignment there is a tick in the box " ext".
If you want to change it to internal you just have to remove the tick.
Before doing so please check the document type used fo depreciation  and the corresponding number ranges assigned.
Hope this helps.
GU

Similar Messages

  • Where to configure retention period for document type ?

    Hi Experts,
    In SAP DMS, once we set a Retention period, after that period document can be deleted or archived automatically.
    can anybody tell me , where to configure this retention period and how document gets archived or deleted after this period.
    Kind Regards,
    Sunil

    Supplementing Senthil's inputs, you may also explore setting the deletion indicator on for the DIR's you no longer wish to retain prior to running the z-program.This can be achieved by adding the function module DMS_PROC_DOC_DELETE in the "Start processing" node.(SPRO > CA Components > DMS > General Data >  'Start Processing for Documents').
    On enabling this FM, in CV04n results screen, use the button 'Process' to set the Mass Deletion indicator on for relevant DIR's. You may then run the deletion program in the background for the above selected DIR's.
    Hope this helps.
    Regards,
    Pradeepkumar Haragoldavar
    Edited by: Pradeepkumar  Haragoldavar on Aug 24, 2010 5:55 AM

  • Process for reverse wrong Depreciation run

    Hi,
    We have a problem in Depreciation run that user had already run wrong Depreciation. Now we need to reverse it and Post correct depreciation again...
    How can We do it...please let me know the process of reverse the Depreciation run.
    Regards...

    Hi Anil,
    Depreciation posting once done cannot be reversed as there is no reversal code for Depreciation.
    But SAP has given you the option of posting corrections in the system..
    Suppose you have executed the AJAB and before moving on to the next month, you realize one Asset is to be retired in this month itself.., then post the retirement entry in the current month, and then again run AJAB with a repeat run selection.
    What system would do in this case:-
    System will reverse the depreciation with respect to the date of retirement in the current month, adjust the net Book value as per the sale amount only for the asset that you are selling..
    All these adjustments will take place only for one asset which you are dealing with..and the balance all other Assets will remain unchanged as there is no change in any of the Assets. This is what the repeat run does..it passes only incremental or differential postings with respect to the last run of Depreciation in the system.
    You do not do anything manually for posting Depreciation..
    Regards,
    SAPFICO

  • Configuring Cached Exchange for O365 click to run package

    Hi Guys,
    For Outlook 2013 we can configure the Cached Exchange mode using a registry setting in OCT
    https://technet.microsoft.com/en-us/library/cc179067.aspx
    Group Policy registry path:HKEY_CURRENT_USER\software\policies\microsoft\office\15.0\ outlook\cached mode!enable
    OCT registry path: HKEY_CURRENT_USER\software\microsoft\office\15.0\outlook\cached mode!enable
    How can we include the setting for Click to run package in Configuration.xml file
    Please suggest.

    Hi Guys,
    For Outlook 2013 we can configure the Cached Exchange mode using a registry setting in OCT
    https://technet.microsoft.com/en-us/library/cc179067.aspx
    Group Policy registry path:HKEY_CURRENT_USER\software\policies\microsoft\office\15.0\ outlook\cached mode!enable
    OCT registry path: HKEY_CURRENT_USER\software\microsoft\office\15.0\outlook\cached mode!enable
    How can we include the setting for Click to run package in Configuration.xml file
    Please suggest.

  • Showing "Instance" Number for documents

    When I print a document, I would like to know which version of the documents is the print-out based on. If I can show the "Instance" number from "Change Log" it would be great.
    Does anyone has an idea how this can be done? Thanks in advance.
    -Alan

    Use translation rules and profiles applied to appropriate dial peers.
    Chris
    Sent from Cisco Technical Support iPhone App

  • Generating Tax Invoice Number for deferred taxes (Thailand)

    Hi all,
    I'm implementing deferred taxes for Thailand, and am attempting to generate an internal tax invoice number for vendors during the running of the program "Transfer Deferred Taxes".
    I've set up the number ranges & intervals, number groups, created a dummy document class, and activated official document numbering for document type SA, which I'm using for the transfer posting.
    However, when running the program "Transfer Deferred Taxes", I'm prompted to key in a tax invoice number of my own, which means that the system is not generating the number for me. How can I get this to work?
    Thanks,
    Daniel

    Hi
    Ideally if it is configured for SD then VBRK-XBLNR and BKPF-XBLNR would be filled with the tax invoice number which is a 16 digit number. For your F1 invoice type check the accounting document type generated. It would mostly be RV.
    You need to set up this accounting document type to consume the tax invoice number range. I guess FB70 transaction would be associated with accounting document type DR which is configured to use up the tax invoice number range.
    So follow these steps:
    1. First check the accounting document type created for the invoice of type F1.
    2. Go to SPROCross Application Component-General Application FunctionsCross-Application Document NumberingIndonesia--Document Numbering
    3. Check the document class created for country ID.
    4. If document class is created as I guess it has been because you can already generate the number through FB70 transactions then check if accounting document type created from F1 invoice is assigned to the document class.
    I guess it is this setting which you are missing. As a result of this tax invoice number is not getting generated for SD documents.
    Thanks
    Indranil

  • Internal no. for challan

    I ve entered one invoice with TDS.
    after that I made an remittance challan
    but the error is coming : No unpaid tax lines exist for the given selection criteria.
    So i ve to check the configuration for internal number for challan.
    or what the problem is , plz explain

    Hai,
    Kidnly check whether you have section code present for the tax line item.
    Raghav

  • BAPI_GOODSMVT_CREATE - External range for document ranges interval

    Hi, my problem is that use the bapi BAPI_GOODSMVT_CREATE to create goods movements (101) and the BAPI returns an internal number for the document number when the number range interval is defined as external . Can anybody help me ?
    Thanks you very much.

    PSTNG_DATE
    DOC_DATE
    REF_DOC_NO
    <b>GM_CODE = '01'.</b>
    MOVE_TYPE = '101'
    ENTRY_QNT
    ENTRY_UOM_ISO
    PO_NUMBER
    PO_ITEM
    <b>MVT_IND = 'B'.</b>
    this r the fileds required for the BAPI_GOODSMVT_CREATE Bapi..
    regards
    aswin

  • Vendor number for ADRMAS and CREMAS

    Dear all
    i am creating vendors in SAP using ADRMAS and CREMAS and sending both of them in a serialized manner. For ADRMAS to be linked with CREMAS, we need to provide same vendor number.
    i can get the next vendor number using the BAPI_VENDOR_GETINTNUMBER.
    I have different mappings for CREMAS and ADRMAS, so each time i get a different internal number for vendors. how do i link my idocs using the same vendor number?
    Regards
    Monika

    Hi,
    cremas and adrmas are coming form one source message right ?
    a) yes - then you can put the one ID (any) into both and get the genarated number later on on the basis of this ID in the receiver system while posting the idoc
    b) no - then they must have a different reference number inside already which you can post to SAP (in any special field - like search filed for example) - and get the correct number in the receiver system while posting idoc
    Regards,
    Michal Krawczyk

  • Depreciation Run - Repeat/restart

    Hi Experts,
    I have an AuC asset (setup as investment measure), which was initially setup with depkey LINI (120 useful life). Naturally, after running the AFAB, this asset calculated a depreciation. After the calculation, I changed the of this AuC dep key in the master data (AS02) as to 0000 (no depreciation). Consequently, I re-run the AFAB for the same period, but the system issue me an error "Message no. AU133 Account  'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01".
    I also understand that 0000 has no account assignment involved. My question is : Are there any steps I forgot to be done for my change in the dep key be recognized by the system?
    Please help . . . thanks in advance

    I came across the same situation in April  month.For resolving the depreciation run issue I assigned temporarily AD account and Depreciation expense account to AUC Asset class.Then restart the depreciation run for March month Once the depreciation run was  successful then again depreciation was executed in planned mode for April month.By doing this the amounts which were posted to AD and Depreciation expense account in march and April  were offset.Then I unassigned the accounts from AUC Asset class.
    Hope this helps.

  • DEPRECIATION RUN SHIFT WISE

    1. CLIENT WANTS DEPRECIATION ON SHIFT BASIS
    FOR MACHINE A DEPRECIATION IS 10 %
    IF SUPPOSE MACHINE A RUNS FOR 3 SHIFTS FOR 10 DAYS IN A POSTING PERIOD
                                                               2 SHIFTS FOR NEXT 5 DAYS AND
                                                               1 SHIFT FOR NEXT 15 DAYS
    HOW TO DEFINE DEPRECIATION TO THE PARTICULAR ASSET.  NOTE THAT THE SHIFT AND DAYS ARE NOT UNIFORM BETWEEN PERIODS

    Hi,
    For calculation of depreciation run shift wise , there are two things has to be maintain in asset master.
    1. Shift factor for the asset
    2. Variable proportion (this field u will able to find it in dep areas.)
    Variable proportion is calculated out of the system.
    Variable proportion will be calculated as follows :
    (Difference between two dep rates as per shift wise X100)/ lower dep rate.
    please reward points if useful

  • Depreciation Run not creating a batch in SM35

    Hi All,
    System is not creating a batch in SM35 for month end Depreciation Run.
    I am using the transaction AFAB with test run system is showing the
    line items of depreciation run but without test run system is not
    creating batch in SM35 to complete the process of depreciation run.
    Please advice what to do to solve this problem. its very (URGENT)
    Regards,
    Yasir Khan

    Hi,
    Have you created a BDC or perhaps you have used Direct postings in FI?
    Look in your asset if it is posted in the period and if it is posted in FI.
    You can recreate a BDC with AFBD - Recreate Session.
    Have look in your Job log and spool file perhaps there is more information
    Paul

  • BAPI : MATERIAL MASTER - Internal Number generation

    Dear Experts,
                        I am using BAPI_MATERIAL_SAVEDATA to update material master,Material number should be generated
    internally.If iam not including Material number,Bapi returns errror mesage.How can i do this?
    Regards,
    Sujay .

    From the function module documentation:
                                                                                    o   MATERIAL                                                            
         Only external number assignment is supported for the material number
         (MATERIAL). If you want the material number to be assigned          
         internally, the method BAPI_MATERIAL_GETINTNUMBER must first be     
         called. This method determines an internal number for the material  
         to be created. You must enter this internal number in field         
         HEADDATA-MATERIAL.                                                  
    Hope this helps,
    -Mark

  • BAPI : Network internal Number range

    hi all,
    I am using bapi_project_maintain , in this i am giving  network as external number . Is there a way to generate internal number for network  using this bapi .
    Thanks ,
    sridhar .

    You can use the CONVERSION_EXIT_ALPHA_INPUT fm.
    Sudha

  • Prefix before the HU internal Number

    Hello
    Could you please confirm is it possible to have a Prefix before the internal number for an HU
    for example
    Prefix is ALLU
    Number range: 2000000000-2999999999
    I need my HU number should be ALLU2000000001
    Please confirm is it possible through any development
    Thanks & Regards
    Hari

    Hi,
    Default system will accept only numeric and lenght is 10. you have change the numbe length domain as CHAR 14 (length 14)for object RV_VEKP. then system will allow to create with alpha numeric and length 14.
    Take your abaper help to do changes for object.
    Hope this helps you..
    Rgds,
    Kris.

Maybe you are looking for

  • Apple Promotes Mirroring to Apple TV from iPod. Why?

    I've seen plenty of answers to questions about how to mirror iPod content to Apple TV; the answers are it is not possible.  Apparently this is true (I have both devices and cannot mirror my iPod to my Apple TV either). Here's the rub:  Apple promotes

  • New session created with every request

    Hi there, I have an web application that we used to deploy on tomcat, websphere and bea without any trouble. We are trying to move to support OAS and the application gives this peculiar behavior: A new session is created with every single request by

  • Installing new operatoring system via firewire

    I like to reinstall my snow leopard, via firewire.

  • Error message 4261 when trying to burn discs

    Arghh, this is driving me mad. Since I updated to Itunes 11, I have been unable to burn playlists to disc. I'm a teacher and need to do this a lot for my work. I've wasted about 20 blank CDs as they start burning, then after a few tracks I get the me

  • Why is New to Java so much faster than Java Programming?

    It feels like the New to Java server is at my neighbor's house, and Java Programming is on Neptune. What gives? It always takes like 10 seconds to load the Java Programming board.