Configure Logical Address for Web Applications-Hyperion 11.1.2

Hello,
I have f5 load balancer infront of two foundation servers and I have not yet configured the Logical address for web applications with Loadbalancer DNS name/hostnmae. I can access all of web applications through Load Balanced URL. Do I Still need to configure Logical Web Address for web applications ?
Thank you so much !

To add to this part of the reason for load balancing is usually to support high availability (in addition to scalability). Without that logic address being setup you will find certain configuration items are pointed to one server or another and if that one server is brought down it impacts key functionality of the whole environment.
You should consider a test of the infrastructure by purposely bringing down services and/or servers to ensure you still have a fully working environment with the other redundant components. This test may take half a day to several days to really go through a full regression test of key features while taking key pieces down.
Regards,
John A. Booth
http://www.metavero.com

Similar Messages

How sharepoint understand when user requests for web applications by their DNS names

HI
I configured Alternate access mapping in my sharepoint farm for default ,intranet zones
and spt farm has two web front end servers and they load balancing by F5 device
in WFE servers there are different web applications are running on different ports
so here I want to know how load balancing works, load balancing configured in F5 device.
when users request a webapplication from browser (ex http://cms) where this request will go
1)when I ping cms and other web applicaations it returns me a loadbalancer server IP for all web applications;
ping cms : it returns 10.xxx.0.80 , same ip returns when I ping for other web app
but ex CMS web application run on the 10.xxx.1.26:81 port in sharepoint server
2) and these sharepoint web applications running on different ports in sharepoint web servers , so here how sharepoint understand when user requests for web applications by their DNS names
http://cms and http://products etc
adil

I'm not sure if the F5 can add a port number (I'm not an expert on load balancers). But in general if you design the SharePoint site to run on port 81 then you need to have port 81 appended to the request or it won't work. http://cms in your
example would take you to http://cms:80 not http://cms:81. But in general DNS will resolve the address back to the F5 load balancer. The load balancer will look at the header of the HTTP request (which contains the original address you requested)
and forward the request to the appropriate web front end IP address. If your web front end is using one IP address for multiple sites then those sites need to be differntiated by using a custom port like 81 (which must be included in the original request)
or because a host header was bound to the web application when it was created. If they are running on different port numbers then the request must include the port number by the time it gets to the SharePoint server.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved.

I have configure remote access feature web application proxy but not configure give the error. The remote name could not be resolved in server 2012 R2.
I have configure Ad and ADFS different server and try to configure web application proxy different server. what setting are required for connect web application proxy to Ad and ADFS.

Hi,
In addition, please make sure that the port 443 is not blocked by the firewall.
Web Application Proxy requires internal name resolution to resolve the names of backend servers, and AD FS servers. When publishing web applications via Web Application Proxy, every web application you publish requires an external URL. For clients to reach
these web applications, a public DNS server must be able to resolve each external URL that you configure. Note that the external URL must resolve to the same IP address as the Web Application Proxy server, or the external IP address of a firewall or load-balancer
placed in front of the Web Application Proxy server.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to configure simultanous access for 11i application

Hi All
We have one existing 11i application instance on node grid1.In which we start the servicess from apps user.
In our same we want another node for the same application in which we will start the servicess from another user(merge)
For that we perfrom the following steps
1.Copy the APPL_TOP,COMMON_TOP,ORA_TOP(8.0.6,iAS) from node "GRID1" to diffrent node "GRID2"
2 configure the GRID2 node using adcfgclone.pl utility(we have configure new node for WEB and FORM Server)
3 We perfrom the modification in the following files ON GRID2 .
i Identify 'FNDNAM=apps' statement in $FND_TOP/secure/<context>.dbc
and replace with 'FNDNAME=merge' to connect to MERGE schema instaed of APPS.
ii. Go to the last line of $APACHE_TOP/jserv/etc/zone.properties file
and identify 'schema=APPS' statement and change it to 'schema=MERGE'
iii. Identify below lines in $APACHE_TOP/modplsql/cfg/wdbsvr.app file
password = apps
     username = apps
     document_table = APPS.fnd_lobs_document
and replace with modified below lines
password = merge
     username = merge
     document_table = MERGE.fnd_lobs_document
6. For redirecting user's request to new Application Server server, we
changed the following 4 system profile options with proper URL and port
at responsibility level only for the responsibilities,
which we use for Merge views.
Profile Options
     Application Framework Agent
     Applications JSP Agent
     Applications Web Agent
     Apps Servlet Agent
When we are able to start the services on GRID2 node,but at the time of login we are getting invalid user name/ passwd error
Please let us know is there any way to access application other than apps user
Regards
Sohail

well thank you very much .I know how to define a DataSource inside Weblogic Server.
But i am confused over one issue
When We are going to use Container Managed EntityManager inside the SessionBean the persistence.xml file looks like this
*<persistence>*
*     <persistence-unit name="RamsEJBPU" transaction-type="JTA">*
*          <jta-data-source>myJtaDataSource</jta-data-source>*
*     </persistence-unit>*
*</persistence>*
But in some cases it looks like as shown below :     <persistence-unit name="RamsEJBPU" transaction-type="resource-local">
     <provider>org.hibernate.ejb.HibernatePersistence</provider>
                  <properties>
               <property name = "hibernate.connection.driver_class" value = "oracle.jdbc.driver.OracleDriver"/>
               <property name = "hibernate.connection.url" value = "jdbc:oracle:thin:@localhost:1521:orcl"/>
               <property name = "hibernate.connection.username" value = "CHENNAISPAT"/>
               <property name = "hibernate.connection.password" value = "CHENNAISPAT"/>
            </properties>
     </persistence-unit>
</persistence>Can you please tell me why is it so ??

Custom host-name for web application SharePoint 2010

I am facing a weird behavior. Can anyone help me regarding this?
Steps performed:
1. Created a web application using custom host name.
2. Created a site collection using "Blank" site template. Nothing issues.
3. Created another site collection using "Publishing" site template. Authentication prompt came multiple times. IIS logs/Fiddler/HTTP Watch are full with 401 entries.
4. Added the custom host-name with web server IP in local desktop hosts file(which is in intranet domain). Prompt issue fixed.
5. Authentication mode set as NTLM.

Hi DDasgupta,
After you created a web application with a custom host name, if you got a prompt for the user and you may face the following issues:
There is continuous prompt for the credentials
HTTP 401.1 error
This shows that there is a problem with the Loopback configuration. This situation should occur only when we access the application from the server machine.
For fixing the problem, we have to disable the Loopback value inside the registry.Open the Registry Editor (regedit.exe) and locate the following key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa, and create a new Key Value of type DWORD inside
it and set the value to 1.
More information, please refer to the link:
http://www.c-sharpcorner.com/UploadFile/40e97e/sharepoint-2010-creating-host-name-for-web-application/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Different results on consecutive runs of OFT for Web Applications

I am using Oracle Functional Testing for Web Applications to test share point site [using: OS = WinXP SP3, default browser = IE8.0.6]
I’ve recorded simple scenario - browsing through two pages (home page > menu link > page 1)
there is no user input involved – just browsing)
problem:
I am running the same test multiple times and I get different results – sometimes (less often) I get clear ‘Passed’ results but more often I get warnings about missing items, Severe content differences)
upon comparing Master and Tested HTML I see that test fails because no content is being logged under Tested:HTML node (the content displays properly in right browser pane)
any hints?

You probably need a close no save step at the end of your action.
In the save for web dialog, when you record the action, save to the folder you
want the batch dialog to put the images. Then set the batch dialog as below.
MTSTUNER

Best Server Role for Web Applications

Hi,
I'm running SQL Server 2008 R2 Express and using Microsoft SQL Server Manager Studio to administer it. I have a web application that does read, add, update, and delete to the database and I am currently using the sa account - which is of course not
a good idea. I want to create a new user but I don't know what the best practice is for web applications and also security. The options I have are:
bulkadmin
dbcreator
diskadmin
processadmin
public
securityadmin
serveradmin
setupadmin
sysadmin
Thanks.

Hi mark_sti,
Based on my understanding, you want to create a new user of the database. Using this new account, a web application could read, add, update, and delete the database.
The options you provide are fixed server roles. For more information about fixed server roles, please refer to this article:
Server-Level Roles.
In this scenario, you need db_datareader fixed database role and db_datawriter fixed database role. Db_datareader fixed database role can read all data from all user tables. Db_datawriter fixed database role can add, delete, or change data in all user tables.
To add two database roles, you should map the login to the database which is used by a web application in Login Properties. Then create a new database user, check Db_datareader fixed database role and Db_datawriter fixed database role on Membership page of
Database User. About permission of different database roles, please refer to this article:
Database-Level Roles.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Function authorize in packages for web applications in Oracle XE

Hello,
i have created a simple test package as follows:
PACKAGE TEST IS
function authorize return boolean;
procedure test;
END;
PACKAGE BODY TEST is
FUNCTION authorize return boolean is
BEGIN
if OWA_SEC.GET_USER_ID = 'test' then
return true;
else
return false;
end if;
END;
PROCEDURE test is
BEGIN
htp.prn('Hello World!');
END;
END;
i have also cerated a DAD with this command:
DBMS_EPG.CREATE_DAD (' test ', '/test/*');
i want to run this link in my web browser: http://127.0.0.1:8080/test/test.test
When i use a real database user then the function test works ok.
But i want to make it work with the user name "test" throw the function authorize.
In my opinion i am creating a DAD in a wrong way. Can anybody help me?
Thanks in advance for your help.

Hi,
AFAIK, there is no official document which states that "Oracle Functional Testing for Web Applications" is certified with Oracle E-Business Suite 11i/R12. I assume it should work with Forms 10g but not with Forms 6i, so it should work (does not mean it is certified) with R12.
I would suggest you log a SR and confirm this with Oracle Support.
Regards,
Hussein

How to capture memory usage for web application

In OATS openscripts, how to capture memory usage for web application? Does it have the exisitng java method that we can call to get the memory data (e.g. peak bytes, private bytes) consumed by web application?

JProbe

Configuring SUP address for IBCM Clients

I have a question about how to configure SUP address for clients that will be roaming from Intranet to the Internet (aka VPN Users)
Currently I have IBCM up and running. Clients report in and are able to download and install software from the IBCM DP. Currently we have group policy's configured to point clients to the correct internal WSUS/SUP servers.
For clients to use IBCM and Internet based SUP is a Windows Update group policy not possible at all? For example is the only way for clients use the IBCM SUP to have absolutely no WSUS Group Policy configured? Is configuring a Domain Group
Policy to have clients point to the Internet Based IBCM SUP not possible?
SCCM 2012 R2
Thank you.

You can create a group policy to point to your SUP. Configure the policy, Specify Intranet Microsoft Update Service Location. Its located in Computer Configuration - Administrative Templates - Windows Components - Windows Update. Note
that the local group policy will be created regardless of using the domain group policy. So, its just a redundant effort.
Best, Jacob I'm a PC.

ECMA 2.0 for web application

I coded for ECMA 2.0 for web application using WCF and deployed the management agent dll in Extension folder with WCF config file named as app.config . I am getting the error at creation of Management agent in FIM synchronization at the time of
Refresh Interfaces as The Extension could not be instantiated. May be FIM is unable to read WCF config file from extension folder of FIM sync. Or is there any other thing m missing? . Can any body suggest me.

Have you tried to put it directly in Synchronization Service binary root folder?
In the past when we needed to have config file for our MA we have put it in Synch engine folder and registered as app section within either dllhost.exe.config or miisserver.exe.config. THen we had no problem with accessing it.
Tomek Onyszko, memberOf Predica FIM Team (http://www.predica.pl), IdAM knowledge provider @ http://blog.predica.pl

Send an email to all user in Oracle Test Manager for Web Applications

I have administrator access to Oracle Test Manager for Web Applications. How can I send email to all user in the system (Oracle Test Manager for Web Applications)?
Thanks
Katherine
Edited by: Katherine on 20/12/2010 16:38
Edited by: Katherine on 20/12/2010 16:39

Hi ,
You can create a single dynamic distribution group with the condition to have only the mailboxes in exchange as its members . Then when a person send an email to that Dynamic distribution group it will get distributed to all the mailboxes
in exchange.
Note : Most important feature in the dynamic group is that the membership of that group will be maintained automatically and also along with that we can have group membership by defining the recipient types/OU /rules.
I agree with ED and also based on my knowledge you cannot achieve your scenario without Distribution groups or dynamic distribution groups.
Thanks & Regards S.Nithyanandham

Which combination is good for web-application ?

Which combination is good for web-application
(struts,hibernet,spring) or (jsf,hibernet,spring)?
Plz let me know if any one have any knowledge on this...
Thanks and Regards
kundan krishna

There is no definite answer to your question. Removing the common elements, I think your question boils down to, which is better? Struts or JSF? Struts is an action-based framework whereas JSF is component-based. JSF has a standard specification with implementation from multiple vendors whereas Struts is just a third-party (Apache) framework. Struts has been around for a real long time compared to JSF. Hope these pointers help. I suggest you read up more on these frameworks before making a final decision.

Does Developer 9i only for web application

Dear Friends,
Does Developer 9i only for web application?
Thanks

Although in theory you can install the client and the application server on one machine so you can be "2 tier" but yes, client/server was desupported back in 6i.

How to grant anonymous access on sharepoint document library/list only not for web application

Hello
How to grant anonymous access on sharepoint document library/list only not for web application.I have claim based sharepoint site and has to be but i want to grant access on document library/list only.Is this possible?
Thanks
Rajesh Kumar "Changing the Face" can change nothing.But "Facing the Change" can change everything.

As i am using following code
SPSite site = SPContext.Current.Site;
SPWeb web = SPContext.Current.Web;
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite ospSite = new SPSite(site.ID))
using (SPWeb webs = ospSite.OpenWeb(web.ID))
// Enable anonymous access on web application
webs.AllowUnsafeUpdates = true;
SPUrlZone urlZone = SPUrlZone.Default;
SPWebApplication specifiedWebApplication = ospSite.WebApplication;
SPIisSettings iisSettings = specifiedWebApplication.IisSettings[urlZone];
//iisSettings.AuthenticationMode = AuthenticationMode.Windows;
iisSettings.AllowAnonymous = true;
specifiedWebApplication.Update();
// Get document library collection here and fetch all the document urls
SPDocumentLibrary docLib = (SPDocumentLibrary)web.Lists["Documents"];
if (docLib != null)
docLib.BreakRoleInheritance(true, false);
docLib.AllowEveryoneViewItems = true;
docLib.AnonymousPermMask64 = SPBasePermissions.ViewPages | SPBasePermissions.OpenItems | SPBasePermissions.ViewVersions
| SPBasePermissions.Open | SPBasePermissions.UseClientIntegration | SPBasePermissions.ViewFormPages | SPBasePermissions.ViewListItems;
//docLib.AnonymousPermMask64 = SPBasePermissions.EmptyMask;
docLib.Update();
Should working but getting access denied......i am totally stuck at this point.
Rajesh Kumar "Changing the Face" can change nothing.But "Facing the Change" can change everything.

Configure Logical Address for Web Applications-Hyperion 11.1.2

Similar Messages

Maybe you are looking for