Configure logs Visual Administrator

Hello all,
I have a problem related to the size of log files in XI environment.
I access to transaction al11 in XI environment. Then, I access to the folder /usr/sap/XIP/xxx/j2ee/cluster/server0 and I see that there are a lot of jrfc*.trc files of 0,5 GB of size.
I would like to know where can I define those files and how to manage them in order to optimize space in servers.
Thanks in advance.
Best regards,
Gemma

Can you please have a look, which errors are logged in the trace files. If possible, then fix the errors, this will reduce the amount of lines generated. It is possible that somebody activated a rfc trace, this can be done, where the rfc destination is specified. For example SM59, or visual admin -> server0 -> services -> destinations.
To configure the logging of the files in server0/log have a look at this thread: Re: Log file size in SAP Netweaver
Visual Administrator Tool -> Server -> KERNEL -> LogManager:
DefaultTraceFile_Count -> is the number of files
DefaultTraceFile_Limit -> is the size of the files in bytes
Be aware, that usually the log files are not overwritten. They are archived in ..log/archive. To turn this off you can do this here:
Visual Administrator Tool -> Server -> SERVICES-> Log Configurator -> Tab Properties
Regards, Michael
Edit: oh, too slow

Similar Messages

ERROR in Document Services Configuration through visual administrator

Hi Experts,
I am using NETWEAVER 7.0 , I am getting error when i am trying to do 'Document Services Configuration' and 'Document Services License Service' through visual administrator message is
"[permissions_collection_operator]: [permission_collection]: domain's permissions: [
standalone: [, ]
collections:
{(java.lang.RuntimePermission loadLibrary)(java.lang.RuntimePermission queuePrintJob)(java.lang.RuntimePermission stopThread)}
{(java.net.SocketPermission localhost:1024- listen,resolve)(java.net.SocketPermission * connect,resolve)}
{(java.util.PropertyPermission java.version read)(java.util.PropertyPermission java.vm.name read)(java.util.PropertyPermission java.vm.vendor read)(java.util.PropertyPermission os.name read)(java.util.PropertyPermission java.vendor.url read)(java.util.PropertyPermission java.vm.specification.vendor read)(java.util.PropertyPermission java.specification.vendor read)(java.util.PropertyPermission os.version read)(java.util.PropertyPermission java.specification.name read)(java.util.PropertyPermission java.class.version read)(java.util.PropertyPermission file.separator read)(java.util.PropertyPermission os.arch read)(java.util.PropertyPermission java.vm.version read)(java.util.PropertyPermission java.vm.specification.name read)(java.util.PropertyPermission java.specification.version read)(java.util.PropertyPermission java.vendor read)(java.util.PropertyPermission java.vm.specification.version read)(java.util.PropertyPermission * read)(java.util.PropertyPermission path.separator read)(java.util.PropertyPermission line.separator read)}
{(java.io.FilePermission * read,write)}
And error when double click on ''Document Services License Service' message is -
"Error while loading service Document Services License Service
java.lang.ClassNotFoundException: com.adobe.service.sap.licensing.AdminUI"
Thanks & Regards
Anirudh Saini

You have the ads_agent pw set incorrectly on the java side. -- I think

How to import configuration in Visual Administrator

Hello Experts
In the Visual Administrator under "Tools" menu there is an "Export" option which exports the VA configuration.
However - i can't find any "import" option.
Does anybody have a clue how to import the exported configuration data back to the VA ?
Regrads
Adi J.

as per design, I guess.
Maybe if import different J2ee configuration can somehow screw up a lot of things..so the feature is not available.
Just my opinion..
cheers,
Vincent

JMS configuration in visual administrator

HI All,
I have deployed an ear file to J2EE stack of NW2004, that ear file consists of JMS topics, queues and destinations.
Any extra configuration need to be done in Visual Admin related to JMS.
I just deployed application without doing any JMS configuration in VA.
Please let me know the detailed procedure for this.
Regards,
Anil.

Follow the below procedure for creating a connection factory/queue/topic
Visual Administrator->Services->JMS Provider
Then create a connection factory and queue .
Get back in case of some issues.
Regards.

SMTP configuration in visual administrator

HI all,
I wanted to know as to where do we configure SMTP in visual administrator.

Hi,
We can configure SMTP in visual administrator and following are the steps
In the Cluster tag, under Services, select Java Mail Client.
In the Properties pane (right portion of the screen), select the SMTP key and enter the value for this key. For example, mail.sap.corp is the name of the SMTP mail server address.
Click Update.
Click Save.
End of the note.
Regards
Krishna

Configurations file location | visual administrator parameter | path ??

Hi folks ,
I have installed the GDS console . As suggested in the installation guide " GDS 1.0 - Installation Guide.pdf " I have copied the GDS folder in the path E:/usr/sap which is where my WAS is installed (This GDS folder comes when you unzip the file GDS1005_1.zip in the software for MDM 5.5 SP05 ase release . It contains the subfolders namely " configurations" , "IncomingMessages" , "MessagesToDataPool"). The WAS and the GDS console are at the same machine .
Now there is a step in the configuration of visual administrator parameters where I need to configure the parameter "Configurations file location" . I gve the path as "E:\usr\sap" as suggested in the example for the configuration in the installation guide (my GDS folder is inside "sap" folder ) but when I try to access the page for GDS through http://<host-name><port>/gds it says resource not found .
What I am not able to figure out is what would be the appropriate path for this parameter so that I am able to access the page ?
Could you please help me out !!!
Regards
Deepak Singh

Hi ,
Actually I did all that you suggested but the problem was , for J2EE to accept my changes I was required to restart the engine from the console which I was not doing . This morning I did that and could move on to the next set of problems . But thanks for the suggestions . I do appreciate that .
- If you look at the " GDS 1.0 - Installation Guide.pdf " then under " Editing the application properties " there is a table which has five columns , Property/Default/<b>1Sync</b>/Description/Example . What exactly does the " 1Sync " column convey ??? . Guess it is the External data pool ??
- I am doing this more as a personel training excercise so I have some infrastructural constraints .I have a WAS 6.40 SP15 installed on my machine . I have MDM 5.5 SP05 with the GDS component . I don't have a XI/R3 system yet in the landscape . I don't have any external data pool . I don't have an AS2 adapter either . So now I am getting a couple of configuration errors which are for some parameters in visual administrator .
The parameters are
> DestinationDataPoolGln
> DestinationDataPoolName
> 'GDS.PrincipalHeader'
> ProviderGln
> ProviderName
> ProviderTimeZone
> 'GDS.SchemaLocation'
> 'LinksItemKeyCombination'
> 'SystemExternalValidations'
Is there a way I can configure these values without adding anything further systems in my landscape ??
Would appreciate your inputs !
Regards
Deepak Singh

Configuring visual administrator to send outgoing email from guided procedu

Dear all,
i am trying to configure my visual administrator to send email from guided procedure.
i have configure the smtp.server and smtp.service_user_mail in
caf/eu/gp/model.
hwever i still encounter error while testing my callable object to send email. can someone pls help me in this area.
may i knw what other configuration is needed to be done to allow sending of email?
If any one have successfully send email using guided procedure, mind shariing with me the step u have performed?
tks a million.

the smtp server i am using is "smtp.gmail.com"
I am wondering if i need to configure anything in the gp administrator workset to allow sending of email from gp?
somebody pls advice me in this area. I

Tutorial with screenshots Configuration of Mobile Administrator

Hello Everyone,
I followed this guide [https://cw.sdn.sap.com/cw/docs/DOC-36599] , I have Sap Nw 7.0 SP13 and I have to build applications with J2EE (JSP, Servlet, Abap4) as described in MDK 2.5.
But I have this problem: [http://farm5.static.flickr.com/4146/4841151013_29ee999b7a_b.jpg]
This is my configuration of System:
[http://farm5.static.flickr.com/4153/4841151005_d2cc77c726_b.jpg]
[http://farm5.static.flickr.com/4133/4841151009_935800f49a_b.jpg]
I used the wizard (type usage MI), the steps from MI_00 to MI_06 and NWA_01 to NWA_07
[http://farm5.static.flickr.com/4152/4841151025_d7da8684a9_b.jpg]
To follow all the steps shown in the screenshots:
Log-on [http://farm5.static.flickr.com/4109/4841151019_a703303530_b.jpg]
Creating a User Group for Synchronization
[http://farm5.static.flickr.com/4125/4841151031_50573b9753_b.jpg]
[http://farm5.static.flickr.com/4144/4841168195_b3f56464e8_b.jpg]

In addition to my above reply, please follow the below steps -
Step 1 . JRA Configuration via Visual Administrator (VA)
1.Visual Administration
2.start VA via go.bat file (and login to the J2EE system)
3.on the u201CClusteru201D tab go to: Server->Services->Connector Container
4.In u201CRuntimeu201D tab expand branch u201Csap.com/sapjra.raru201D.
5. Mark service u201Ceis/SAPJRAFactoryu201D and go to u201CManaged Connection Factoryu201D tab and then to u201CConnection Definitionu201D tab. Set there u201CMaximum Connectionsu201D to value higher than 0.
6.Save your changes with u201CDisketteu201D icon
7.Now mark service u201Ceis/SAPJRAFactoryu201D and use clone icon (two paper sheets)
8.Enter name u201CSAPJRAFactory_ENu201D and press OK
9.Check whether cloning is successful or not.
10.Go to u201CManaged Connection Factoryu201D tab and then to u201CPropertiesu201D tab and check there if language fits to the factoryu2019s name. If needed adjust language settings and save your changes with u201CDisketteu201D icon
Note : All parameters in u201CPropertiesu201D tab must be u201CStringu201D type.Repeat clone step as many times as many languages you want to serve. For example : - u201CSAPJRAFactory_DEu201D service has set up language as German.
Step 2. Connection setup for self registering programs
To upload deployed mobile components to the ABAP Stack it is necessary that the EJB MobileContainerBean is registered as a program. Furthermore a RFC connection has to be created in ABAP stack to access the EJB. The access to the EJB will be performed when the function module MEMGMT_MOBILE_CONTAINER_SYNC is called. To ensure that the connection can be created the following tasks have to be performed once.
Creation of the JCo RFC Connection
1.     Start the visual administrator of your J2EE.
2.     And open the node of your server.
3.     under Services -> JCO Rfc Provider Tab Runtime you are able to create a new connection.
4.     create a connection with following parameter
a.     RFC Connection
i.     Program ID = MEMGMT_MOBILE_CONTAINER_SYNC
ii.     Gateway host = <Gateway of your system>
iii.     Gateway service = <the service of your gateway>
iv.     Number of processes(1..20) = 5
b.     Repository
i.     Application server host = <the application server where the program should be registered>
ii.     System number = <System number of your system>
iii.     Client = <logon client >
iv.     User = < Logonuser>
v.     Password = <password of the logon user>
c.     If you have a Unicode system mark Unicode
5.     Use the SET Button to save you settings
6.     Mark the new entry u201CMEMGMT_MOBILE_CONTAINER_SYNCu201D under available RFC destinations and choose start. If the start button is grayed out your Connection from J2EE side is established and the program is registered.
creating a RFC Connection in ABAP to access EJB
1.     Logon to your middleware and start transaction sm59.
2.     Mark the node TCP/IP connection and choose the create button
3.     Choose an new name for your connection
4.     set the connection type to u201CTu201D and enter a description
5.     select the tab technical settings and mark the radio button Registered Server Program
6.     enter as Program id u201CMEMGMT_MOBILE_CONTAINER_SYNCu201D
7.     as Gateway host and gatewayserce enter the same values as you already did in the visual administrator
8.     In Tab MDMP & Unicode select the type of system you have Unicode or Non-unicode
9.     Save your settings and test the connection everything should work properly
Step 3: Register your RFC connection for uploading components
Start transaction sm30 and enter MEMGMT_J2EE_DEST as table name.
Under RFC Destination enter the RFC you created for accessing EJB and enter a short description.
Step 4: R/3 configuration to call transactions via Web GUI
Following parameters has to be configured within an R/3 system to enable Web GUI calls:
1. There are three port parameters in instance profile:
icm/server_port_0 = PROT=HTTP, PORT=50026, TIMEOUT=900
icm/server_port_1 = PROT=HTTPS, PORT=1443, TIMEOUT=900
icm/server_port_2 = PROT=SMTP, PORT=25026, TIMEOUT=900
2. To use SSL the following four parameters are necessary:
ssl/ssl_lib = $(DIR_EXECUTABLE)/<sec library> (eg. libsapcrypto.so)
sec/libsapsecu = $(DIR_EXECUTABLE)/<sec library>
ssf/ssfapi_lib = $(DIR_EXECUTABLE)/<sec library>
ssf/name = SAPSECULIB
More information about Deploy and Config JRA and Creation of RFC connection -
Deploy SAP JRA connector
1. Launch Deploy Tool - C:\usr\sap\<J2EE Instance ID>\<JCO ID eg JC30>
j2ee\deploying\DeployTool.bat.
2.Create a new project
3.Click. OK.
4.Now click on the Deployer Tab. Next to Project a new menu item DEPLOY will become visible. Click on Deploy->Load Module.
5.Goto C\usr\F20 (j2ee instance)\SYS\global\ra\
6.In RHS pane sapjra.jar will appear. Select it and click Ok.
After the JRA file has been deployed, open the Visual Administrator.
Click on Cluster -> Server -> Services -> Connector Container.
1.     In RHS pane under node CONNECTOR 1.0 there will be a node called sap.com/sapjra.jar. Expand that node.
2.     Click on eis/SAPJRAFactory. In RHS pane click on u2018Managed Connection Factoryu2019 tab.
3.     Click on u2018Properties tabu2019.
4.     Add following properties and values :
     Language
     MessageServer
     UserName
     SAPClient
     SystemID
     Password
Make sure the type is always java.lang.string.
5.Save this. Click on eis/SAPJRAFactory and click on clone button                  .
6.Enter SAPJRAFactory_EN as value in the popup box. And change the value of language property to EN. Save it.
Clone it once again and give Name = SAPJRAFactory_DE and language = DE.
7.Under Services in LHS pane click on JCo RFC Provider
8.In right most pane enter PROGRAM ID = MEMGMT_MOBILE_CONTAINER_SYNC.
9.For rest of the fields enter data for the ABAP system you wish to connect Admin UI .
Creating TCI/IP type RFC Connection -
1.     Login to the ABAP system.
2.     Launch transaction sm59. Create new TCP/IP type RFC connection.
3.     Enter some name for the RFC destination. Give program ID = MEMGMT_MOBILE_CONTAINER_SYNC.
4.     Enter appropriate gateway service and host (same as you entered in Visual Admin). Test Connection.
5.     Launch transaction sm30.
6.     Open table MEMGMT_J2EE_DEST . Create a new entry. Enter the name of RFC destination that you created in SM59 in u2018RFC Destinationu2019 field. Enter some description.
7.     Save the data.
Thanks and Regards,
Ruchi.

Error in visual administrator while implementing Spnego authentication sche

hi,
i have under gone all thease steps.
for implementation of SPnego sceme on my portal.
>downloaded SPnego wizad file from note specified.
>unziped it and got .ear files
>deployed those .ear files on my server.
>now went for service user J2ee configuration on visual administrator.
>when i clicked on deploy and start button .
>it asked me to browse file .
>first .ear file was taken sucessfully.
>in second file it give me this error message .
ie>The directory D:\usr\.............\.....\ will be used for extracting the EAR file.the directory content will be deleated. please back up all usefullinformation from it
>shall i click on ok and proceed further or not.
please suggest me what to do.

Hi Sumit Bhargav,
Based on the error message, it seems that the issue is related to NHivernate and MSBuild, but
VS General Question forum discusses the usage issue of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor. In order to check where the issue is, could you please create a new and simple web application without having NHibernate, build it and clean the project?
Whether the web application can be built successfully?
If you get this error when you build or clean any solution, maybe you are experiencing the same issue
described here:
http://stackoverflow.com/questions/26930376/how-to-fix-checkattributes-task-could-not-be-loaded-error-after-installing-v
Please check whether the Microsoft.Web.Publishing.Tasks.dll assembly is located at
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web. If no, please copy it from somewhere else to this path. If you can’t get a copy of this assembly, I suggest uninstalling VS 2013 Update 4 or uninstalling and
reinstalling all VS components.
If the issue only occurs in the web app with NHibernate implement, then this issue is more related to the specific NHibernate implement in ASP.NET. I recommend consulting
your issue on ASP.NET forum: http://forums.asp.net/
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Session Expired after logging on to Visual Administrator - SLD Config

Hey Guys,
I have a NW2004s installation, both ABAP and Java stack, with UME pointing to the ABAP stack.
I created a user in ABAP stack, and assigned the J2EE_ADMIN role to this user.
I try to log into the Visual Administrator with this user. The login is successful.
However right after I navigate to the sld data supplier node and click it, I get the error message, Session Expired.
I think it is because I am not authorized to configure SLD or something like that.
When I created the user in the ABAP stack I entered all the roles for the user with which I am logging on to the Visual Admin:
SAP_SLD_ADMINISTRATOR
SAP_SLD_CONFIGURATOR
Anyhelp so that I can get over this problem and configure the SLD in the system.
Thank You.
Sumit.

J2EE_ADMIN role has all the rights(configure SLD etc) , make sure you configure the SLD and import the CIM model content you can login to SLD at http://<host>:5XX00/SLD and then access the data supplier bridge
where XX is your instance number

Lost policy configurations in Security proivder in Visual Administrator

Hi Portal Gurus,
I lost Polcy Configurations in Security Provider service in Visual Administrator.Now Iam not able to login to Visual Administrator its giving an error.But portal is up and running .when I check in visualadminconsole log saying "logon module not suceeded"
Is there anyway to recover Policy configuration ?
Regards
Tami

Pl follow the steps given in the below link.
Thanks,
Vuthpala
[[http://help.sap.com/saphelp_nw70/helpdata/en/7f/c52442ad9f5133e10000000a155106/frameset.htm]]

Using certificates to log into Visual Administrator?

We have been asked to use certificates / SSL to log into the Visual Administrator as opposed to entering our usernames and passwords. Is this possible with the Visual Administrator and if so, are there any configuration guides, setup instructions or pointers to how to accomplish this? Has anyone else dones this type of configuration?
Any help would be gratly appreciated.
Thank-you,
Deb Nugent.

I am closing this question. Through another thread (SSO to the Visual Administrator itself) and additional information, I have been told that this is not possible within the Visual Administrator.
While this is not the response I had hoped for, I am considering this question answered.

Can't Log into J2EE Engine Visual Administrator

I cannot get logged into our J2EE Engine Visual Administrator on our SAP Portal. After I enter my userid and password (which I know are valid) I get a progress bar which progresses to approx 50%, then errors out with the message: 'Error while connecting. Cannot open connection on host: <IP-address> and port: <port>'
I found this document to troubleshoot the problem:
https://cw.sdn.sap.com/cw/docs/DOC-29070?treeid=DOC-7447
It says the problem is likely that the P4 port is incorrect or the wrong transport layer is selected in my connection string. It suggests using the config tool to find the P4 port and has a diagram showing the port in the local properties. When I go to my config tool, I am missing the Local Properties box. My screen only shows the Global Properties. Is there somewhere else to check the port. I am pretty sure I have the right port because if I try to connect using an incorrect port I get the error message instantly.
The transport layer in my connection string is 'default'.
Can anyone help? Thanks.
Our Visual Administrator version is 6.40 Support Pack 22. The java version is 1.4.2_13.

Hi Kathryn,
P4 port is used for connecting to VA. P4 port will be 5<Inst no>04.
Please check if you have this port while connecting to VA. You can check this port in the index page of your portal.
Can you try restarting the portal instance ??
Also you need not enter userID for logging into VA. By default it uses "administrator" user.
You may also check if the administrator user is locked.
Revert if the issue persists.
Cheers.,
Raghu

Error in Starting Visual Administration - SSO Configuration

We have installed EP 7 SP 14 on Enterprise Linux 5.0
Initially, i.e. after installation, only the following login module stack was used under sap j2ee engine
BasicPasswordLoginModule - SUFFICIENT
To check the SSO with other nw 7 java system in our landscape, I have changed it to the following using Visual Administration
EvaluateTicketLoginModule - SUFFICIENT
BasicPasswordLoginModule - OPTIONAL
CreateTicketLoginModule - REQUISITE
I have restarted ep
Now, I am able to login to the system using Administrator login from the browser.
I checked the SSO. It was not working.
I tried to log in to Visual Administrator to make changes, its giving me the following error
Error while connecting
com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied.
How do I proceed ?
Rgds,
Santosh

Given below is the output from the log file security.0.log available at
/usr/sap/DEP/JC00/j2ee/cluster/server0/log/system
#1.#00505696557D00650000002A0000779100045465B00B0CB5#1218695628786
#/System/Security/Authentication
#sap.com/irj
#com.sap.engine.services.security.authentication.logincontext
#P00101959#920##n/a##f3ef9d2069ca11ddcff800505696557d
#SAPEngine_Application_Thread[impl:3]_37##0#0#Info#1
#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
User: P00101959
Authentication Stack: ticket
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false      false
2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          true       true
3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok          true       true
Central Checks                                                                                true                  #
#1.#00505696557D00650000002B0000779100045465B00B1048#1218695628787
#/System/Security/Audit#sap.com/irj
#com.sap.security.core.util.SecurityAudit
#P00101959#920##n/a##f3ef9d2069ca11ddcff800505696557d#SAPEngine_Application_Thread[impl:3]_37##0#0#Info#1
#com.sap.security.core.util.SecurityAudit#Plain###P00101959
| LOGIN.OK
| USER.CORP_LDAP.p00101959
|
| IP Address=[172.18.40.68]#
Rgds,
Santosh

Configure Memory Info service in Visual Administrator

Hello All,
I need to configure Memory Info service in Visual Administrator.
I am looking for a service/tool which will give me a summary of used/free and total memory in portal.
Ive read a little about Memory Info service and i think this will help me fulfill my requirement.
1. If you know of any other tool which will help me in my requirement, please give details.
2. Please guide me to configure Memory Info Service in Visual Admin. Currently its appears as its not configured. When I right click on it, the Start and Stop commands in the context menu are disabled.
Awaiting Reply.
Regards,
Ritu

Hello Detlev,
In the Visual Administrator, there are few services like:
1.Memory Info - The context menu for Start / Stop is greyed out.
How can I start this service?
Referring to your reply above, could you please be little more explicit.
2. Message Info - enabled.
3. Monitoring - enabled.
Awaiting Reply.
Regards,
Ritu

Configure logs Visual Administrator

Similar Messages

Maybe you are looking for