Configure Macbook Pro with one hard drive to work with FCP

I would like to do some video editing while on the road. I have a new Macbook Pro with Final Cut installed. I know that the capture scratch should not be on the same hard drive as the application. How do I set up the computer to work with FCP when I have only one hard drive. I do have external hard drives to use when editing at home but I would like to edit while traveling in the car or on a plane.

If you don't have an external drive attached, FCP will default to the system drive. The CAPTURE SCRATCH folder will be located in the DOCUMENTS>FCP DOCUMENTS folder. You CAN edit on the system drive, but performance might suffer and you might get dropped frames. DV, OFFLINE RT are fine, HDV and other formats might give you headaches. I have edited DV and OFFLINE RT HD on my laptop's hard drive on a plane without much problem.
Get a bus powered hard drive like the G-Raid Mini. This way you only need one power source.
Shane

Similar Messages

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

How do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.

how do i copy files from my macbook pro to my hard drive? These files were previously started on my old dell.

More then likely that external drive is formatted the Windows NTFS format which Mac OS X can Read but it can not Write to that format. So you would need to copy all the data off that drive, to either a Windows PC or to your Mac, thenn use the Mac to format it for the Mac OS. Which would be Mac Extended (Journaled) with a Partition Table of GUID.
If you want to use that drive on both Mac and PC then you would need to format it either FAT32 or exFAT.

I am a dj and my macbook pro 13inch 500g hard drive is almost maxed out. i want to upgrade to a 1tb HDD. what is my best option?

i am a dj and my macbook pro 13inch 500g hard drive is almost maxed out. i want to upgrade to a 1tb HDD. what is my best option?

Depending on the year of the MBP, the hard drive may not be considered a user replaceable item...but you can check the available 1 TB drives at good sources such as OWC, http://www.macsales.com they are great to deal with and have on-line videos showing how to do most installation tasks.

I tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just del

i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those images so i could try a different approach to transferring, but the new iphoto won't let me do anything and every time i try to delete anything it crashes (since the image amount is so high). please help!!
MacBook Pro, OS X Mountain Lion (10.8.2), iphoto '11, version 9.4.2

To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.

I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.

Using Carbon Copy Cloner which is quicker firewire 800 Macbook Pro to external hard drive or Macbook Pro to same via Airport Extreme?

Using Carbon Copy Cloner which is quicker firewire 800 Macbook Pro to external hard drive or Macbook Pro to same via Airport Extreme?

Firewire 800 is the fastest and most reliable. Also it's bootable if you hold the option key down on a wired or built in keyboard. Not bootable via Airport obviously or if Filevault is used.
It's only your first clone that's usually takes the longest, it's shorter when it updates as you only do the changes which you can control to keep a pure clone if you wish.
Most commonly used backup methods

Thunderbolt 2 external hard drive not working with Macbook Pro (early 2011)

Hi,
I'm new to this forum and I hope you guys can help me with this:
I've recently bought an external hard drive that works on Thunderbolt 2 (LaCie d2 3TB). When I connect the new drive to my Macbook Pro through the thunderbolt port, the drive isn't recognized. However, the drive works fine through a USB connection.
I thought that Thunderbolt and Thunderbolt 2 are compatible, however this doesn't seem to be the case. Maybe it's because the OS X / driver / firmware version that I'm working on that is not updated? I work on an early 2011 Macbook Pro: OS X Version 10.6.8 (Snow Leopard).
Thank you very much for your help!
Daniel

Hi danielsh6,
I recently bought the new Lacie Thunderbolt 2 D2 3TB and I had the same problem as you, i have a macbook pro early 2011, those support thunderbolt but many times there is a bug that doesn't let you connect any thunderbolt drives to your computer. The solution I found was installing this update:
Thunderbolt Firmware Update v1.0
Before doing this I would recommend you updating to mountain lion (not yosemite yet as there is still some glitches and more on preview's macbook pro's).
Hope this helped!
Forest

2007 Macbook pro kernel panic, hard drive problem?

Hello!
I've been trying to sort this for a few weeks now, and I'm hoping someone may be able to shed some light on the situation.
Problem:
I have a 2007 15" MacBook Pro (MacBook Pro 15/2.2/2GB/120GB) which a few weeks ago suddenly died on me. It has what I believe is called a kernel panic. On startup a grey screen falls down with a box saying that I need to restart the computer.
I took it to my local apple store where they booted an OSX (not sure which) from an external drive (I think it was using a firewire cable). The MacBook appeared to work fine from this external hard drive, but when disk utility was run on the internal hard drive, the disk utility eventually froze.
Based on this info, the guy there deduced (fairly reasonably I suppose) that the problem must be my hard drive, and replacing my hard drive should solve this. So bought a
Seagate Momentus 7200.4 500 GB,Internal,7200 RPM,6.35 cm (2.5").
The equipment I now have to try and get my MacBook to work:
- An iMac 2.7 Ghz i5 (8gb Ram) running Mac OSX 10.7.5
- A replacement hard drive for the MacBook (Seagate Momentus)
- A SATA HArd drive USB docking station
- A 500gb iOmega Hard drive with Firewire 800 cables
- The 2 original install disks for Tiger that came with the MacBook Pro
- A working .dmg of retail snow leopard
What I have tried so far:
I have formatted the replacement hard drive correctly (GUID) for Mac OSX. If I turn the macbook pro on with the new hard drive in, a folder icon with a question mark in it flashes in the middle of the screen... If I put in the original install disk, it starts to read it (apple logo and spinning wheel) and then eventually kernel panics. When I hold option on start up, the 'Mac OSX Install Disk 1" is the only option available (the cd/dvd drive must be working if it recognises the disk here i assume?) but when I select it, it spins for a bit, then kernel panics.
My next approach was to try and create an installable and bootable version of an OSX on an external hard drive. (I have tried this with both the original Tiger install disk, and with the leopard.dmg)... I followed the readily available instructions online on how to do this, and was able to restore the first partion on the external hard drive with the OSX install disk image.... The problem I have then face is installing the osx onto the second partition.
This seems to be because my newish iMac/OSX wont let me boot any OSX installer CD/firewire or otherwise, other than the original operating system for the iMac.
I thought this wouldn't matter, as I would be able to run the installer when I plugged the iOmega into my MacBook pro. The problem I now have is that the Macbook wont recogninise the iOmega when it is connected by firewire. It will only recognise it when connected by USB, but when I try and run the installer, it spins for a while then kernel panics. I believe this is because MacBook pros of this age will only run OSX Install/bootable through firewire.
So... hardware wise, could this be anything other than a problem with the hard drive? As we know the MacBook pro will boot from an external drive...
If anyone has actually managed to read this far into this incredibly boring, waffling description of my problem, I am already grateful, and if anyone can give any help or advice at all regarding this, I will be eternally in your debt....
Thank you

I have a 2007 15" MacBook Pro (MacBook Pro 15/2.2/2GB/120GB)
The MacBook Pro 3,1
So I bought a Seagate Momentus 7200.4 500 GB,Internal,7200 RPM,6.35 cm (2.5").
Right the standard hard drive (not the XT which is a hybrid and can be problematic)
a folder icon with a question mark in it flashes in the middle of the screen...
That's the firmware telling you it can't find the/a bootable OS.
The 2 original install disks for Tiger that came with the MacBook Pro
If I put in the original install disk, it starts to read it (apple logo and spinning wheel) and then eventually kernel panics
but when I select it, it spins for a bit, then kernel panics.
Your machines firmware was updated, it will only now boot from 10.6 either on a bootable USB thumb drive or via the white 10.6.3 retail disks you can get by calling Apple by phone.
This seems to be because my newish iMac/OSX wont let me boot any OSX installer CD/firewire or otherwise, other than the original operating system for the iMac.
True. If the iMac could boot from the 10.6.3 disk, then you could install 10.6.3 via Firewire Target Disk Mode onto the other Mac if for instance the Superdrive didn't work.
MacBook pros of this age will only run OSX Install/bootable through firewire.
True.
Just order the 10.6.3 white retail disk from Apple via phone, forget 10.4 and 10.5 as they are not getting updates anyway.
However you can extract iLife from the 10.4/10.5 machine specific disks using Pacifist from CharlesSoft.
Follow these install instructions
How to erase and install Snow Leopard 10.6

New Macbook Pro 15": my hard drive 7200trm makes noise....is it normal ??

Hi,
Just recieve my brand new Macbook Pro 15" i5 with a hard drive Seagate 500GB 7200rpm. And it's not silent at all!
For Macbook Pro users, if you want to know the intensity of the noise I'm talking about, download smcFanControl and put your fans to +/- 3000rpm and you will hear what I hear with my hard drive. Is this normal ?
Thanks for helping
Message was edited by: Yecc

Sorry my english is not perfect.
I didn't say to turn off the fans. I say you have to increase the speed of yours fans to 3000 rpm, for you realize the intensity of noise emitted by my hard drive. I would like your opinions if my hard drive is normal or not ? I think not, because the noise is very hard, but I would like a confirmation.
Thanks

Macbook Pro late 2011 hard drive problem

I have a problem with the Hard drive of my macbook pro 13" late 2011. The problem is something about SMART failing. So i decided to backup all my files
And erase the Hard drive and plan of changing a new Hard drive.
My Question is, is it possible to install a higher Hard drive capacity? Say 1 TB for my unit?
Im having a 750 GB in my macbook with 5400 rpm.
If it's possible what is the best quality Hard drive available in the market?
Thanks!

I believe they are up to 2TB in the 2.5" laptop drives.
Do a quick google on the brand & model first to see what the reviews are and failure rates.
I use Hitachi in mine.
SSD's are also an option for you. These are much faster than the traditional mechanical drives, but also much more expensive & are much smaller in capacity.
Here is a link that gives you some idea of options.

File transfer from MacBook Pro into external hard drive

I can't copy files from the MacBook into an external hard drive.
In the 'Get Info' section, it says read-only. However, the hard drive have just been recently bought.
I had the same problem with our previous hard drive. Although the previous hard drive was 'read-only' I was able to copy and paste files in our old HP laptop.
What can I do in order to copy and paste files from the MacBook into the hard drive?
Hard drive = Toshiba
Capacity = 1TB

In my last paragraph, I said
"Note that Windows PCs cannot write natively to an HFS drive, so if you need to exchange files between Mac and PC, we need to talk about different options."
Windows cannot read Mac Extended (HFS) formatted drives; the Mac cannot write to Windows (NTFS) formatted drives.
The only formats fully compatible between Mac and PC are FAT32 (largely deprecated) and exFAT. If you need full read-write compatibility between Windows and Mac, and you can erase the drive (ie, it's a new drive or you have confirmed backups), reformat to exFAT using Disk Utility.
If you have a drive with files on it and you cannot erase them at the moment:
- if the drive is formatted for the Mac, you can purchase MacDrive for the PC
- if the drive is formatted for Windows (NTFS), you can purchase Paragon NTFS for the Mac.
Matt

Am using 2007 iMac running 10.4.11. Do not wish to upgrade now. Where can I find an external hard drive to work with it? Also need a printer?

I'm using a 20" iMac that I purchased in 2007. It's running OS 10.4.11, and still doing beautifully. But I've got to get serious about upgrading and I don't want to lose the material that's on it.   Purchased an external hard drive about two years ago, copied everything I wanted at that time on to it. When I tried using the h.d. a few days ago it was garbled. Now I see that inside the box it says that it requires OS 10.5+.   Anyone know if there's still a new hard drive out there that would work with 10.4.11?   Can't even find thumb drives to work with my system anymore.   Any ideas would be appreciated.

If I were you I would bite the bullet and upgrade to Snow Leopard. You will still be able to use AppleWorks by installing the Rosetta emulator included in Snow Leopard. And, it's a much better OS version than Tiger.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
See App Compatibility Table - RoaringApps.

I can't get my new samsung hard drive to work with my mac and tv

I bought my first ever hard drive today. It is a Smasung M3 Portable 1.5 TB.
At first I plugged it in and it wouldn't let me drag anything from finder over to the hard drive. I did some research (googling) and followed the steps to change the format to 'Mac OS extended (Journaled)' which allowed me start dragging files across.
I then put a movie on the hard drive, waited for it to copy then plugged it into my TV (hoping to sit back and watch said movie). However the TV would not let me even open the hard drive.
I did some more "research" and read that if I changed the format to 'MS-DOS FAT' it would let me use the hard drive on Mac and PC. I tried that but still had the same trouble of the hard drive not working on the TV.
Basically, I want to use the hard drive as storage/ back up for my files BUT ALSO to put all of my movies on it and plug it into my TV.
Can someone please help me.
PS- I am not very tech savvy. I won't be able to do anything too technical.
Thanks you in advance (:

maybe this link will help http://www.makeuseof.com/answers/play-media-files-mac-formatted-external-hard-dr ive-hdtv/ unfortunately its for file up to 4 GB size, otherwise try to connect your mac directly to your Tv or I suggest contacting SAMSUNG about this issue, maybe the have assigned softwares for this formatting issues like in western digital for example.

Hitachi X500 external hard drive not working with MacBook Pro

I purchased a new Hitachi X500 500GB external USB hard drive today and when I plug it into my MacBook Pro the drive makes a clicking noise and never mounts. When I try it on my wives MacBook it boots up fine. I bought one early in the day and the same thing happened, so I returned it and got a new one and the same thing happens. Any thoughts?
Looks like it's formatted with Fat32 when I look at it on the MacBook.
Thanks

Welcome to Apple Discussions!
Does the external drive have it's own power brick? If not, it's bus-powered and may not be getting enough juice to run.
Also try all the USB ports on your MBP. Although they are "supposed" to be producing the same amount of power, posts around here suggest that's not always the case.
If the drive does not have a power brick, you can get an inexpensive powered USB hub (it has a power brick) like this one:
http://eshop.macsales.com/item/Belkin/F5U403P/
Adding a powered hub fixes problems with bus-powered USb external drives about 95% of the time.

Configure Macbook Pro with one hard drive to work with FCP

Similar Messages

Maybe you are looking for