Configure MaxDB Content Server Website in IIS 6.0

Dear All:
I need to know how can I configure content server website on IIS. Our company was working on standalone server 2003 with MaxDB 7.6. Now the server has been migrated into windows 2003 cluster with MaxDB 7.6 installed on the same cluster.
I tried to execute WebSiteManCS.exe from content server CD but i got the error "An error occured during the creation of the SAP Content Server website in IIS".
Could you please advise how can I resolve this issue? Also, I did not created IIS cluster on both content server nodes. Do I have to create it or is there any steps that I have to follow in this case?
Regards,
Ahmad Yasin

Hi,
The installation of the content server creates the web site automatically.
Please refer the following SAP Notes carefully, to get more information.
[ Note 1039401 - SAP Content Server Clustering with Windows 2003.|https://service.sap.com/sap/support/notes/1039401]
[Note 175096 - SAP Content Server installation guide|https://service.sap.com/sap/support/notes/175096]
[Note 658442 - SAP Content Server 6.30 on Windows 2003 servers|https://service.sap.com/sap/support/notes/658442]
Regards,
Bhavik G. Shroff

Similar Messages

How to configure Adobe Content Server in a web farm

We have a requirement where we would like to configure multiple servers with Adobe Content server and route requests via Network Load Balancer. We need help to configure Adobe Content serves in a web farm. can some one from your team direct us to appropriate documents or provide suggestions to configure Adobe Content server in a web farm.

Request to provide instructions to configure Adobe Content Server in a web farm. I have installed Adobe Content Server in one of the box and configured all three services
1) Fulfillment
2) Packaging
3) Admin
We are successfully able to do packaging and fulfill documents. My goal is to add two more servers to handle load on ACS. I had a doubt on how to create and configure certificate files for other two boxes and add them NLB
Request your help in guiding me to the documents that helps me to complete this configuration.
Thanks,
Ravi

Configuration problem:content server 6.40

Dear all
I saw the content repository status shows 'data(71%)log(78%)' in CSADMIN-<ContRep>-OverView before.
When my content repository running it only shows 'running',how to configure to show the data usage?
Content Server 6.40
MaxDB 7.6.06.10
Thank you and best regards,
Sam Zhao.

The content server is 6.40 and the MaxDB is 7.6.06.10.
I have the snapshot of that,but how can I show it in the forums?
I think maybe you misunderstood me. I'm saying I can't see any data usage in CS 6.40 either, I can see the overview and statistics. The data usage might have been available in older releases of CS but to get that information now from within SAP you will likely need to setup a DB59 connection to your CS database.
Edit: Oops just saw your screenshot now, interesting ...I have no idea how you get this information to display, sorry. Newer patch level perhaps ?
Nelis
Edited by: Nelis Lamprecht on May 18, 2010 10:54 AM

Content Server URL not working.Win2008-MAXDB 7.6.06.20-IIS7

Hello Experts,
I have installed Content Server 6.4 successfully on WIN2K8 with IIS7 and MAXDB 7.6.6.20
When i tried to access the content server url, i was prompted with a POP UP asking for download of ContentServer.dll.
I have strictly followed the installation guide -CONTENTSERVER on WIN 2008 and installed all the necessary roles mentioned in the installation guide.I have also checked the option - install website during my installtion.but still facing the issue while accessing content server URL.
While going through SDN forums, in some of the threads, it was mentioned that manual installation of content server website has resolved the issue.
Could any one please let me know the procedure to be followed for manual installation of content server website to the port manually.
Or
Kindly suggest the solution for this, if you have come across the similar issue.
Thanks & Regards,
Sriram Pingali

Hi,
I have installed Content Server 6.4 successfully on WIN2K8 with IIS7 and MAXDB 7.6.6.20
When i tried to access the content server url, i was prompted with a POP UP asking for download of ContentServer.dll.
1) Firstly check whether you have installed all the components pertaining to IIS 7.0 in your system
2) Check whether you have allowed contents like *.dll in the IIS
Hope this helps.
Regards,
Deepak Kori

IIS as Content Server

Dear guys,
we are planning to bypass the Enterprise Portal and separating the content player in separate host and Content Repository in separate host. adding to that we are planning the Content Server by using IIS.
The operation speed of the Enterprise Portal is little slow. So we decided to use the IIS as Content Server
send me the link of the document or give me the idea for
separating the Content Player in separate host.
Configuration between Content Player and IIS ( as Content Server)
Regards
Lee

All that informations is available in the SAP Content Server installation guide in SAP Marketplace.
Regards
Juan

SAP Content Server configuration CSADMIN username password

Hi all.
I am having problems when I try to configure SAP Content Server 6.40 after installation. When I try to run csadmin to set up the content repository, I constantly get this login prompt. I have tried using the default SAPR3 user and password, but I only get access denied. The SAPR3 user exists on my MaxDB 7.6. I have also tried setting AdminSecurity=0 in the ContentServer.ini file, and the login prompt is still displayed.
Does anyone have any idea on what username and password I should use, so that I can try to complete the Content Server config? Also, if you know of any decent guidelines for the content repository configuration, I'd be happy if you provide me with some documentation..
Thanks!
Regards,
Thomas

Dear Natalia,
Thank you for your reponse.
During installation I went with the defaults for all users.
The results of the commands you wanted me to run are as follows:
dbmcli on <SID>>dbm_version
OK
VERSION = 7.6.00
BUILD = DBMServer 7.6.00 Build 035-123-139-084
OS = WIN32
INSTROOT = D:\sapdb\CST\db
LOGON = True
CODE = UTF8
SWAP = full
UNICODE = YES
INSTANCE = OLTP
SYSNAME = Windows Server 2003 family
dbmcli on <SID>>user_getall
OK
CONTROL
SUPERDBA
dbmcli on <SID>>user_get <username>
dbmcli on CST>user_get CONTROL
OK
SERVERRIGHTS=DBInfoRead,SystemCmd,ExecLoad,UserMgm,DBFileRead,Backup,InstallMgm,
LoadSysTab,ParamCheckWrite,ParamFull,ParamRead,DBStart,DBStop,Recovery,AccessSQL
,AccessUtility,SharedMemoryMgm,SchedulerMgm,Scheduling,EvtDispMgm,EvtDisp
GUIRIGHTS=
SECONDPASSWORD=NO
DISABLED=NO
COMMENT=
USERTYPE=DBM
dbmcli on CST>user_get SUPERDBA
OK
SERVERRIGHTS=DBInfoRead,SystemCmd,ExecLoad,UserMgm,DBFileRead,Backup,InstallMgm,
LoadSysTab,ParamCheckWrite,ParamFull,ParamRead,DBStart,DBStop,Recovery,AccessSQL
,AccessUtility,SharedMemoryMgm,SchedulerMgm,Scheduling,EvtDispMgm,EvtDisp
GUIRIGHTS=
SECONDPASSWORD=NO
DISABLED=NO
COMMENT=
USERTYPE=DBA
dbmcli on CST>sql_execute select * from users
OK
END
'CONTROL';'';'CONTROL';'ADMIN';'MULTIPLE';(null);(null);(null);'DEFAULT';'200706
29';'00133012';'20070629';'00133012';'20070629';'00133012';'CST';'sapcsd.norkom'
;0;'NO';(null)
'SUPERDBA';'';'SUPERDBA';'SYSDBA';'MULTIPLE';(null);(null);(null);'DEFAULT';'200
70629';'00133012';'20070629';'00133016';'20070629';'00133012';'CST';'sapcsd.nork
om';10;'NO';(null)
'SUPERDBA';'';'SAPR3';'DBA';'MULTIPLE';(null);(null);(null);'ASCII';'20070629';'
00133027';'20070629';'00164307';'20070629';'00164308';'CST';'sapcsd.norkom';28;'
NO';(null)
dbmcli on <SID>>sql_connect superdba,<password>
OK
dbmcli on CST>sql_execute select * from users
OK
END
'CONTROL';'';'CONTROL';'ADMIN';'MULTIPLE';(null);(null);(null);'DEFAULT';'200706
29';'00133012';'20070629';'00133012';'20070629';'00133012';'CST';'sapcsd.norkom'
;0;'NO';(null)
'SUPERDBA';'';'SUPERDBA';'SYSDBA';'MULTIPLE';(null);(null);(null);'DEFAULT';'200
70629';'00133012';'20070629';'00133016';'20070629';'00133012';'CST';'sapcsd.nork
om';10;'NO';(null)
'SUPERDBA';'';'SAPR3';'DBA';'MULTIPLE';(null);(null);(null);'ASCII';'20070629';'
00133027';'20070629';'00164307';'20070629';'00164308';'CST';'sapcsd.norkom';28;'
NO';(null)
dbmcli on <SID>>sql_release
OK
dbmcli on <SID>>sql_connect sapr3,<password>
OK
dbmcli on <SID>>sql_release
OK
dbmcli on <SID>>exit
OK
I hope you are able to read something useful out of this.
Best Regards,
Thomas

Error in configuring content server

Dear All
i am configuring external content server
I have defined my content repositories using tcode OAC0. parameters are as follows:
content repository : ZXYZ ( XYZ is my content repository)
Document Area : DMS
Storage type :HTTP content Server
Version no. : 0046
HTTP Server :IP address of content server
Port No : 1090
HTTP Script :ContentServer/ContentServer.dll
after that i saved.
now when i am clicking on Test connection i am getting Connect to Host Port 1090 error: NIECONN_REFUSED
Pls Let me know any solution you have.
Thanks
sandeep sharma

> now when i am clicking on Test connection i am getting Connect to Host Port 1090 error: NIECONN_REFUSED
This means that
- either the HTTP server on the target system is not running - or not listening on port 1090
- a firewall prevents accessing that port
Markus

SHarepoint as SAP Content Server Configuration

Actually this message is for Espen Leknes because I have read something from him i another message but if you guys know about this, all will be wellcome !!!!!!!
This is Andrea, Basis COnsultant. I am writing to you because I was reading lot of messages in SAP SDN regarding DMS and SAP Content Server.
I saw you have participated in lot of messages. I am specially interested in one of them which is about Sharepoint.
The customer I am working in would like to use Sharepoint as global Content Server and I would like to configure Sharepoint as SAP Content Server in order to save documents and attach them to sap objects (scanned invoices, manuals, cad drawings, etc)
I know it is not possible since Sharepoint is not SAP certified and http inteface from SAP (archivelink) does not work with this product.
I have read about Inet.DM and thinks like this.
I read you have configured SHarepoint as WebDav. In some post you have written:
Hi guys,
There is a third way, where you end up using Sharepoint as your content server
1. COnfigure a content server to use file storage
2. COnfigure the file area for webdav
3. The webdav is the sharepoint webdav
Voila, you are using sharepoint as your content server.
Why the heck you would do that is beyond me, but it works.
Ok, the question is:
I am using ECC60 and I dont have file storage option.
Is is possible to explain this again or sent me screenshots os OAC0 ?? It would be very useful.
Thanks so much in advance for this.
Andrea

Hi Andrea,
I could find few of the links . Hope these are useful.
Duet Enterprise is an SDK for integration between SAP and SharePoint
http://sharepoint.microsoft.com/en-us/product/related-technologies/pages/duet-enterprise-for-sap-and-sharepoint.aspx
configuration
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/805b67bd-7e93-2e10-99b7-ebe8f3d359d3?QuickLink=index&overridelayout=true
Regards,
Deepak Kori

External Content Server configuration

Hi,
Can anybody provide me how to configure External content server for Archivelink.
Regards
Laxmi Bhushan

Hi Laxmi,
For contetn server installation use t-code OACT - maintain the repository here if not add it. Then in OAC0 define the repository means select are as document management,type HTTP content server or archivelink. Then maintain IP adress and port here.
Then goto CSADMIN and here activate the certificate it's very important task.
I hope this will resolve the query.
Regards,
Ravindra

Http error 405 method not allowed sap content server windows

Hi Expert,
we have install sap content server 6.5 on microsoft windows 2012 using
IIS 8.0 and MAXDB 7.9 SP 8 Build 21. After configuring the content server it self we still cannot
create repository error "http error 405 method not allowed"
Oac0 --> tab Create --> Content rep.
I have implement note number 1704365 - IIS roles not created by
default when installing Content Server on Windows 2008. even though it
is not applicable to our IIS.
when i try to open http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
it always direct us to download file not showing the version number.
is there any solution for this issue?
Thanks a lot,

Dear,
Can you please try following URL ?
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo&pVersion=0046&contRep=<Repository Name>
Regards
S S B

WebDAV repository to Content Server

Hi all,
I have a problem. We have some data in a content server, and would like to create a repository to allow users to read the file on this content server. SAP says it is posible to technically posible to connect to the content server via webdav, but I can't find how to do it. If I make a connection to the IIS I only get the files in the home directory of the content server website, that is som dlls. If I make a webdav connection to the database I only get a connection to a system webdav table that have nothing, and can't configure the table to use the content server tables.
Any idea on how to solve this? Can't use the DMS connector in this case, because we use archivelink.
Thanks in advance,
Gregori Coll Ingles.

Hi Gregori
       You can configure your content server data as file repository. You can refer this link for the
configuration of file repository.
http://help.sap.com/saphelp_nw04/helpdata/en/4c/9d953fc405330ee10000000a114084/frameset.htm
       Or if you want to do it using IIS Server. You have to
1) Creat one virtula directory under your default website.
2) Apply your data folder as the Web Site Content Directory for that virtual directory.
       For eg. you have created the virtual directory named 'Content' then you can access your web site as
http://website/Content.( website= yours website ip or name)
3) Give the same path as above in 'http system' which you have created for the WebDAV repository.
        Hope this will help you.
Prasad

Activate the Content Server for purchasing

Hello,
I want to activate Content Server for PR/PO/RFQ?RFQ/SES/GR/SA/Contract.
Followed the below mentioned step:
1. Configured the "Content Server" using transaction OAC0
2. Created new document class using t-code OAD2
3. Created / Activated new document type and associate the document class (T-code OAC2)
4. Link Object type / Document Type / Content Repository and Link table (t-code OAC3)
But still unable to see the "Store Business Document" navigator enabled in the Services for Object icon for PO (ME21N/ME22N/ME23N)
Can anybody tell me if some thing i've missed out here?
Thanks in advance

Sap R/3 4.6C - CS630 (patch-lvl15)
We do not use SapDB or MaxDB to store the document on the content server, we store the documents directly in the file system.
Our Content servers run on win2003 servers.
In my company we've currently got 15 different content servers in 10 countries.
We've got one content server and one cache server at each location for one SAP system. One physical server has 2 content servers and 1 cache server. One for our SAP production system and one for our SAP Quality test system. They use the same cache server (first we created 2 cache servers, but it was not possible for SAP to destuingish between the two, so both cache servers got used by both SAP systems)
We have also implemented a couple of add-ons:
1. Conversion and viewserver (by Seal AG). conversion server converts office documents to pdf when documents are released. Currently use only 2 conversion servers, planning to increase when the volume gets larger.
Viewserver adds stamps on pdf-files when you view or print a document.
2. Document Distribution Manager (by CENIT AG). Makes it easy to schedule prefill of cache. Also possible to move documents from one storage category to another. And Rules for transfering documents from one site to another can be made (Ex. "not allowed to move files larger than 20 MB between <certain> sites")
Perhaps I could be of assistance?
BUT, anyway, the reason I post this is because I have problems upgrading my CS630 (lvl15) to CS640 (lvl6).
Asked SAP via an OSS, and they said it was like a regular patching (stop webservice, copy *.dll files, and restart webservice). But when I try this, I can't get contact with the content server via CSADMIN in SAP. I get "HTTP error: 500 Internal Server Error"

View contents of SAP Content Server

Hi all,
We have successfully installed and configured SAP Content Server - the storage system is database. From a separate test system, we use archivelink to send an image to the content server. As per the logs, the image was successfully sent to the content server. Is there any method we can use to check whether the image is indeed stored on the content server? We use Database Studio to do administration on the MaxDB database of the content server but it does not provide any facility for viewing the contents. Please suggest how can the image or any other data be viewed.
regards.

Hi Gagan,
Thanks for your reply. Your suggestion will indeed confirm whether the image is present on the content server or not. However, I want to know whether there's some way we can 'see' the image on the content server. I downloaded another tool called SQL Studio. There you can browse the tables/indexes/synonyms, run queries etc but I'm not able to know which are the relevant tables I need to look into. There should be a table that must be keeping the image or at least a record concerning the image.
Any other suggestion.....
regards

Adobe Content Server 3.0.1 Store and Library conflicts

Dear All,
I am working on Adobe Content Server 3.0.1 and able to configure it to ecommerce site but i am unable to package the books when both library and store is configured on my Adobe content server 3.0.1 at a time.
please let me known the version of the content server i using is licensed to use only store or a library at a given time.

We configured Adobe Content Server 3.0.1 and created one store and one library, when we want to lend a eBook i am unable to locate the option for lending the eBook in "Availbility" tag page of "Books" Tab when i set the "Adjust" option to value "Loan".
Please let me know whether my version of content server allows us to package a eBook for lending if so where can i find the option for lending the eBook.

Error while Setting Up Oracle Content Server to Send Jobs to Oracle IBR

Hi,
I am trying to configure Oracle Content Server to send jobs to IBR.
I am using following version of UCM:
11gR1-11.1.1.3.0-idcprod1-100505T121221 (Build:7.3.0.180)
Both UCM and IBR are using same WAS domain. Installed on Windows server 2008.
1.I have started both manged servers for UCM and IBR.
2.Then by browsing IBR console http://vpunvfpctnsz-07:16250/ibr/ , i have changed the
Incoming Socket Connection Address Security Filter:
127.0.0.1|0:0:0:0:0:0:0:1|<<my.server.IP.address>>
3.Enabled DAMConverter component on IBR
4.Restarted IBR.
5.Created an outgoing provider on UCM content server as follows:
Provider Name: IBR
Provider Description: Provider for IBR
Provider Type: outgoing
Provider Class: intradoc.provider.SocketOutgoingProvider
Provider Connection: intradoc.provider.SocketOutgoingConnection
Instance Name: VPUNVFPCTN955099yscom16250 << same as IBR server name >>
Server Host Name: vpunvfpctnsz-07
HTTP Server Address:
Server Port: 16250
Relative Web Root: /ibr/
Conversion Options: Handles Inbound Refinery Conversion Jobs
Refinery read-only mode: False
Maximum Jobs to Queue: 1000
It is showing following status:
Connection State: This remains "good" when i click on test and after some time chages to "down".
Connection Error: Unable to communicate with refinery provider IBR; it does not resolve to a valid IBR. Exception type is 'java.lang.Throwable'.
Did i miss any step?
Please suggest.
Thanks and regards,
Minal

Hi
Server Port: 16250
This should be the value of IntradocServerPort for IBR server .
By default it is 5555 .
Replace 16250 with 5555 (if you have not changed it ) .
Save the changes , restart UCM managed server .
Test to see if the error shows up .
Hope it helps .
Thanks
Srinath

Configure MaxDB Content Server Website in IIS 6.0

Similar Messages

Maybe you are looking for